1997 Ford F-150 Pickup Belts and Hoses

Name: Vulco-Flex« II Flexible Coolant Hose
Brand: Gates
SKU: 25808
Price: 54.99 USD

Below you will find various in-demand Ford Belts and Hoses, components and accessories for your 1997 F-150 Pickup. Advance Auto Parts has popular F-150 Pickup parts like Engine Cooling Hoses, Fuel Hoses, Serpentine and V Belts and more. You’ll also find aftermarket and OEM Belts and Hoses for other F-150 Pickup model years including 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996 and more. Select a category of 1997 Ford F-150 Pickup Belts and Hoses below and start saving instantly.

Popular 1997 Ford F-150 Pickup Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Serpentine Belt Drive Component Kits

Belt Tensioner Pulleys

Heater Hose Fittings

Fuel Hoses

Engine Oil Cooler Hoses

HVAC Heater Pipe Lines

Seal Pullers

V-Belts

Fuel Filler Hoses

Drive Belt Idler Assemblies

Essential Belts and Hoses for 1997 Ford F-150 Pickups

from

$54.99

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:

Improved sealing surface for greater leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimum inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature Range: up to +257 Deg. F (+125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$44.99

Fuel filler neck leaking? This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.

Product Features:

Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles.
Durable construction – made of fuel-resistant materials to reduce future failure potential.
Regulatory compliant – built to meet emission and inspection standards
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$82.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavyduty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life.
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
This tensioner is another Dayco product proudly made in the USA

from

$59.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$19.79

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$43.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$15.79

Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:

The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
The laminated construction helps absorb greater shock loads associated with diesel engines
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$127.99

This Litens Serpentine Belt Drive Component Kit fits 1997-2001 Ford E-150, E-250, E-350, F-150, F-250, F-350 w/4.6/5.4/6.8L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

All-in-one solution to get the whole job done right the first time!
Eliminate the guess-work by repairing the whole system.
Front end accessory drive components wear together. Replace all of the components for added piece of mind.
A serpentine belt system that is not operating properly will affect other components. Many of your car’s systems are driven by the belt system. Keep them all functioning in tip-top shape!
Worn tensioners and idlers can cut belt life in half.

from

$21.32

The Dayco Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application.
Precision bearing
OE High quality pulley assembly
Durable long life performance.

from

$23.99

This pulley is manufactured by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction for long life and trouble-free performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Installation instructions included.

from

$15.49

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector.
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability.
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$24.49

HVAC heater hose connectors fail when the plastic material fatigues from heat and vibration. This upgraded Dorman OE FIX replacement connector is made from corrosion-resistant stainless steel for greater durability.

Product Features:

Improved design – this HVAC heater hose connector has been redesigned for greater durability the original equipment part.
Durable construction – this heater hose connector is made of stainless steel instead of the original equipment connector to reduce damage from heat fatigue and vibration.
Easy to install – matches the original equipment form and dimensions for a simple replacement
Quality tested – this part has undergone try-on, corrosion, heat and pressure testing to ensure a quality fit and long service life

from

$33.49

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$25.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$32.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$20.29

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$30.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$30.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$47.99

Spectra Premium filler neck hoses are engineered, developed and validated by our in-house team of Canadian engineers ensuring it meets or exceeds the OE specifications.

Product Features:

Manufactured with high quality rubber to ensure it maintains its dimensional characteristics even in extreme cold/hot weather variations seen in the North American market
OE design to ensure exact fit, form and function
Fit tested to ensure ease of installation for the application it was intended for
Part is tested to ensure it meets the same requirements as OE specifications
Compatible with all fuel types it’s designed for
Includes necessary clamps for a complete installation solution

from

$40.49

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$18.29

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$139.99

This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.

Product Features:

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly.
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler.
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$48.49

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications

from

$87.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

from

$41.99

This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications.
Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$28.49

This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications.
Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Upgrade your 1997 Ford F-150 Pickup with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1997 Ford F-150 Pickup, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Belts and Hoses are key to keeping your F-150 Pickup functioning at its best. At Advance Auto Parts, we offer a wide selection of 111 Belts and Hoses for the 1997 Ford F-150 Pickup, designed to meet your needs without breaking the bank. From Engine Cooling Hose replacements to Fuel Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1997 Ford F-150 Pickup at great prices. Our Belts and Hoses inventory for this model ranges from just $2.49 to $181.99, with an average price of $50.76. Our 111 Belts and Hoses in stock come from 12 trusted brands, so you’re sure to find the right part for your 1997 Ford F-150 Pickup without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1997 Ford F-150 Pickup, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, Litens, Driveworks, and more. Dayco Belts and Hoses start at just $21.29 and boast an impressive 5 stars average rating from customers. Litens and Driveworks also bring quality to the table, with Belts and Hoses available starting at $23.99, and at an average 5 stars rating. With 2,423 customer reviews and counting, our 1997 Ford F-150 Pickup Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1997 Ford F-150 Pickup is always ready to roll. We’re committed to providing you with everything you need to keep your F-150 Pickup in top shape, all in one place. Start shopping confidently below for your 1997 Ford F-150 Pickup!

Best-Selling Engine Cooling Hoses for 1997 Ford F-150 Pickups

Enhance the driving experience in your Ford with 6 quality Engine Cooling Hose components, starting at $21.99.

show more show less

from

$21.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$65.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$55.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$60.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$83.98

The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) hoses, they are the only hoses recommended by Ford Motor Company. Motorcraft® hoses offer long-lasting quality – Ethylene-propylene diolefin monomer (EPDM) rubber used in most underhood hoses resists heat, oil, grease, antifreeze and all approved coolant additives.

Product Features:

Pre-shaped hose allows easy installation
Ethylene-propylene diolefin monomer (EPDM) rubber-over-braid construction resists cracking, swelling and splitting
Recommended by Ford Motor Company

from

$76.99

Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

Top Picks for 1997 Ford F-150 Pickup Serpentine and V Belts

Upgrade Ford F-150 Pickups with top-quality Serpentine and V Belts parts, including 31 OEM and aftermarket selections for your 1997 model.

show more show less

from

$56.99

Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:

Engineered to handle operating conditions with temperatures up to 130°C (266°F)
Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
Capable of delivering excellent performance in high torque and high power pulse applications
Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

from

$80.99

Engineered to handle operating conditions with temperatures up to 130°C (266°F)
Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
Capable of delivering excellent performance in high torque and high power pulse applications
Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

from

$30.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$53.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$30.49

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$37.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$57.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$64.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$61.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$23.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$27.49

This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch
Meets OEM requirements

from

$45.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$85.99

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$127.99

All-in-one solution to get the whole job done right the first time!
Eliminate the guess-work by repairing the whole system.
Front end accessory drive components wear together. Replace all of the components for added piece of mind.
A serpentine belt system that is not operating properly will affect other components. Many of your car’s systems are driven by the belt system. Keep them all functioning in tip-top shape!
Worn tensioners and idlers can cut belt life in half.

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$77.99

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$48.49

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$57.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$55.99

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$37.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$60.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$66.99

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$101.83

ACDelco Professional, premium aftermarket V-Ribbed Advanced Technology Belts serve as replacement belts for accessory belt drive systems (ABDS) and other serpentine belt applications. They are designed using advanced manufacturing technology and premium EPDM rubber construction to provide customers with superior accessory belt drive systems (ABDS) and new-vehicle-type performance. These premium aftermarket replacement v-ribbed advanced technology belts are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life

from

$67.86

Drive Belt

from

$63.63

The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$54.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$50.23

Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Strong tensile cords limit stretching.
Supports higher horsepower loads.
Made from high strength synthetic rubber.

from

$50.21

DRIVE BELT

from

$48.69

Drive Belt

from

$44.49

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$43.96

Drive Belt

In-Demand Heater Hoses for 1997 Ford F-150 Pickups

Select from 23 premium Heater Hoses parts for your 1997 Ford F-150 Pickup, with prices ranging from $11.24 to $113.99.

show more show less

from

$25.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$15.49

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector.
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability.
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$29.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$57.99

This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$51.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$28.49

This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications.
Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.49

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector.
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability.
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$39.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$19.49

Product Features:

Used on cars and trucks when the original quick connector fails, or the replacement hose does not include them
Manufactured w/ a new design that retains the O-ring so they cannot get lost or damaged
Fit just as the OEM quick connects for easy installation as well as removal

from

$27.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$60.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$34.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$14.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector.
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$41.99

This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications.
Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$96.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$15.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector.
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$113.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$21.29

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$18.99

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.

Product Features:

Resists electrochemical degradation and water permeation
Use with heater hose connectors and bulk heater hose to create custom assemblies
Compatible for coolant, air and water applications
EPDM tube and cover, synthetic fiber reinforcement
SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
Caution: Do not use for fuel or oil transfer applications

from

$41.99

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$28.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$19.29

Resists electrochemical degradation and water permeation
Use with heater hose connectors and bulk heater hose to create custom assemblies
Compatible for coolant, air and water applications
EPDM tube and cover, synthetic fiber reinforcement
SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
Caution: Do not use for fuel or oil transfer applications

from

$11.24

Heater Hose Connecto

Most Sold 1997 Ford F-150 Pickup Belt Tensioners

Explore our best-selling Ford parts for the 1997 F-150 Pickup among 8 OEM and aftermarket options starting from $61.99.

show more show less

from

$81.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts

from

$61.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts

from

$70.99

Litens was the Original Equipment (O.E.) supplier of this part and offers this “O.E. Exact”* part for the aftermarket. This Litens aftermarket product meets all original equipment form, fit, and function specifications for this General Motors tensioner. (*OE Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design.) The Litens aftermarket part has a black-coated pulley bolt versus the silver bolt used on the OE part. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada” Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Professional Mechanics will change this tensioner in approx. 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$82.99

Litens was the Original Equipment (O.E.) supplier of this part and offers this “O.E. Exact”* part for the aftermarket. The Litens product meets all original equipment form, fit, and function specifications for Ford 2.4L van and truck applications with A/C. (*O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design.) Note: This part meets the Original Equipment specification which calls for steel pulley and a sophisticated pivot design. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring, and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Professional Mechanics will change this tensioner in approx. 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$85.99

Litens Automotive is the original equipment supplier of this tensioner to Ford. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is designed for F-Series and E-Series vehicles without air conditioning. This robust tensioner features a heavy duty steel pulley. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Installation instructions included.
Durable Steel Pulley for long service life and performance.
Professional Mechanics will change this tensioner in about 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$128.79

The Motorcraft Belt Tensioner is manufactured with premium quality in mind

Product Features:

Designed to provide less operating range variation under tension, helping to minimize premature failure and poor performance
Always application specific – no one-size-fits-all solution
Feature a cast-aluminum spring case and arm to resist cracking and fatigue
Sealed-for-life bearing helps provide long service life
Meets Motorcraft 10-year/150,000-mile durability specifications
Designed to perform in harsh underhood environment
Easy to install
Recommended by Ford Motor Company

from

$67.99

Dayco No Slack Automatic Belt Tensioners are built to outperform and outlast competitive OE parts. This specific Dayco Automatic Belt Tensioner is manufactured with a specially coated patented flat wire spring to allow the internal tension to be concentric, thus providing a more even degree of constant tension. The heavy duty cast aluminum spring case resists cracking and fatigue. Each component is built to resist rust, endure the toughest of conditions while promoting quieter performance and longer life. This tensioner contains a metallic locator pin built to withstand extreme drive demands and properly locate the tensioner for installation. The patented Deflected Arm Plate dampens arm movement, prolonging the life of the tensioner by limiting the amount of rotational movement.

Product Features:

Manufactured with a specially coated patented flat wire spring to allow the internal tension to be concentric, thus providing a more even degree of constant tension
Contains a metallic locator pin built to withstand extreme drive demands and properly locate the tensioner for installation
The patented Deflected Arm Plate dampens arm movement, prolonging the life of the tensioner by limiting the amount of rotational movement

from

$102.09

The Motorcraft Belt Tensioner is manufactured with premium quality in mind

Product Features:

Designed to provide less operating range variation under tension, helping to minimize premature failure and poor performance
Always application specific – no one-size-fits-all solution
Feature a cast-aluminum spring case and arm to resist cracking and fatigue
Sealed-for-life bearing helps provide long service life
Meets Motorcraft 10-year/150,000-mile durability specifications
Designed to perform in harsh underhood environment
Easy to install
Recommended by Ford Motor Company

Top-Rated Belts and Hoses Brands For Your 1997 Ford F-150 Pickup

Shop for the best-rated brands offering Belts and Hoses and other products for your 1997 Ford F-150 Pickups. Below you’ll find some of our best rated Belts and Hoses from Dayco, Litens, and Driveworks, and more. Belts and Hoses from these brands that fit a 1997 F-150 Pickup start at just $21.29 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 1997 Ford F-150 Pickup Belts and Hoses

When it comes to maintaining or upgrading your 1997 Ford F-150 Pickup, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 1997 Ford F-150 Pickup. With over 35 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $21.29, with an average price of just $43.37. Plus, with over 1,474 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$21.68

This product is not rated

Dayco, Acc. Belt Idler Pulley

“”

from
$60.99

This product is not rated

Molded Heater Hose; EPDM Rubber, 23/32 Inch Diameter, 21 Inch Length

“”

from
$34.99

This product is not rated

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 19 Inch Length

“”

Popular Litens 1997 Ford F-150 Pickup Belts and Hoses

Litens auto parts is one of the highest quality Belts and Hose brands in the market. Any 1997 Ford F-150 Pickup owner should feel confident when installing genuine Litens parts in their vehicle. To ensure the best fit and performance for your 1997 F-150 Pickup, Advance Auto Parts carries a full inventory of 11 Litens Belts and Hoses. Plus you will be keeping your Ford in peak condition while saving money because prices on these Litens Belts and Hoses range from $23.99 to $127.99, plus, with more than 92 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from
$53.99

This product is not rated

Idler Pulley: Direct Fit, Steel, 90mm Diameter

“”

from
$127.99

This product is not rated

Kit de courroie d’entrainement accessoire

“”

from
$82.99

This product is not rated

Accessory Drive Belt Tensioner – Original Equipment Quality

“”

FAQs for 1997 Ford F-150 Pickup Belts and Hoses

Which Belts and Hoses are best-sellers for 1997 Ford F-150 Pickups?

Out of 111 Belts and Hoses that fit 1997 Ford F-150 Pickups, the following parts are the top sellers:

Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (10457738) – $33.49
Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 76mm Diameter (10457820) – $28.99
Serpentine Idler/Tensioner Pulley; Direct Fit, 76 mm Diameter, 37 mm Smooth (15130004) – $25.99

What’s the price range for 1997 Ford F-150 Pickup Belts and Hoses?

Belts and Hose prices for the 1997 Ford F-150 Pickup start at $2.49 and go up to $181.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 1997 Ford F-150 Pickup?

The average price for Belts and Hoses for the 1997 Ford F-150 Pickup is $50.76. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Ford F-150 Pickup model years?

Yes, we currently carry Belts and Hoses for 17 model years of Ford F-150 Pickups between 1980 and 1996. Belts and Hoses are bought most frequently for the following model years: 1996, 1995, 1994, 1993, 1992, 1991, 1990, 1989, and 1988.

What are the cheapest Belts and Hoses for my 1997 Ford F-150 Pickup?

The cheapest 1997 Ford F-150 Pickup Belts and Hoses we carry in stock are:

Safety Stripe« Standard Straight Heater Hose (10504844) – $2.49
Heater Hose Connecto (11926187) – $11.24
Idler Pulley (Pulley only) (10040953) – $11.49
Idler Pulley (Pulley only) (10041701) – $13.49
Heater Hose Connector 3/4 In. Tube x 5/8 In. Hose (17190331) – $14.99

What are the top-rated Belts and Hoses that fit the 1997 Ford F-150 Pickup?

Out of 2,423 reviews by customers, our 1997 Ford F-150 Pickup Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1997 Ford F-150 Pickup and their top-rated products:

Serpentine and V Belts
- Poly Rib Belt HD Serpentine Belt; 79.53 Long, 8 Rib Count, Heavy Duty (19270618) – $80.99
- Poly Rib Belt HD Serpentine Belt; 99.02 Long, 8 Rib Count, Heavy Duty (19270415) – $56.99
- Poly Rib Belt Serpentine Belt; 103 Long, 6 Rib Count (3290178) – $53.99
Belt Tensioners
- Poly Rib Belt HD Serpentine Belt; 79.53 Long, 8 Rib Count, Heavy Duty (19270618) – $80.99
- Poly Rib Belt HD Serpentine Belt; 99.02 Long, 8 Rib Count, Heavy Duty (19270415) – $56.99
- Poly Rib Belt Serpentine Belt; 103 Long, 6 Rib Count (3290178) – $53.99
Radiator Hoses
- Poly Rib Belt HD Serpentine Belt; 79.53 Long, 8 Rib Count, Heavy Duty (19270618) – $80.99
- Poly Rib Belt HD Serpentine Belt; 99.02 Long, 8 Rib Count, Heavy Duty (19270415) – $56.99
- Poly Rib Belt Serpentine Belt; 103 Long, 6 Rib Count (3290178) – $53.99

What types of Belts and Hoses do you sell for my 1997 Ford F-150 Pickup?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 1997 Ford F-150 Pickup:

Can I get help with 1997 Ford F-150 Pickup Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Belts and Hoses and more.

What is your return policy for Ford F-150 Pickup Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Ford F-150 Pickup Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1997 Ford F-150 Pickup Belts and Hoses

Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25808)

Dorman – Fuel Filler Neck Hose (Part No.573-012)

Dayco – Serpentine Belt Tensioner: 1 Piece, Built To Outperform And Outlast OE Parts (Part No.89393)

Dayco – Poly Rib Belt Serpentine Belt; 102 Long, 6 Rib Count (Part No.5061020)

Gates – Premium Molded Heater Hose (Part No.18830)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20" Long, 1.50" Diameter (Part No.E72691)

Dayco – V-Belt, Top Cog (Part No.17510)

Litens – Kit de courroie d’entrainement accessoire (Part No.LV999266B)

Dayco – Dayco, Acc. Belt Idler Pulley (Part No.G60201221071DAY)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 90mm Diameter (Part No.900053A)

Dorman – Heater Hose Connector (Part No.800-403)

Dorman – Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (Part No.800-409HP)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900052A)

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 76 mm Diameter, 37 mm Smooth (Part No.89016)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21" Long, 1.75" Diameter (Part No.E71040)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21" Long, 1.50" Diameter (Part No.E71039)

Dayco – V-Belt Assy. Idler/Tensioner Pulley; Steel, 94mm Dia., 19.3mm Width, Grooves (Part No.89025)

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 90 mm Diameter, 30 mm Smooth (Part No.89006)

Yukon Gear – Seal Puller Tool (Part No.56063)

Spectra Premium – Fuel Filler Hose (Part No.FNH009)

Gates – Premium Molded Heater Hose (Part No.18799)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, .75" Diameter (Part No.A70799)

Dorman – Engine Oil Cooler Line (Part No.625-202)

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Dorman – Engine Heater Hose Assembly (Part No.626-222)

Dorman – 90 Degree Molded Heater Hose: Steel, Direct Replacement (Part No.626-229)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 22.50" Long, 1.75" Diameter (Part No.E71898)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19.50" Long, 1.75" Diameter (Part No.E71899)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 27" Long, 1.75" Diameter (Part No.E71901)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.72" Diameter (Part No.E71963)

Motorcraft – Motorcraft Radiator Hose (Part No.G2000456654MTR)

Gates – Premium Modular Coolant Hose (Part No.22299)

Spectra Premium – Fuel Filler Hose (Part No.FNH009)

Dorman – Fuel Filler Neck Hose (Part No.573-011)

Dayco – Poly Rib Belt HD Serpentine Belt; 99.02 Long, 8 Rib Count, Heavy Duty (Part No.5080990)

Dayco – Poly Rib Belt HD Serpentine Belt; 79.53 Long, 8 Rib Count, Heavy Duty (Part No.5080795)

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 90 mm Diameter, 30 mm Smooth (Part No.89006)

Dayco – Poly Rib Belt Serpentine Belt; 103 Long, 6 Rib Count (Part No.5061030)

Driveworks – Poly Rib Belt Serpentine Belt; 103 Long, 6 Rib Count (Part No.1030K6)

Driveworks – Poly Rib Belt Serpentine Belt; 89.57 Long, 6 Rib Count (Part No.895K6)

Driveworks – Poly Rib Belt Serpentine Belt; 96.85 Long, 6 Rib Count (Part No.968K6)

Dayco – Poly Rib Belt Serpentine Belt; 96.85 Long, 6 Rib Count (Part No.5060968)

Driveworks – Poly Rib Belt HD Serpentine Belt; 99.02 Long, 8 Rib Count, Heavy Duty (Part No.990K8)

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 90mm Dia., 28.2mm Width, 6 Grooves (Part No.89012)

Driveworks – Poly Rib Belt HD Serpentine Belt; 79.53 Long, 8 Rib Count, Heavy Duty (Part No.795K8)

Dayco – Poly Rib Belt Serpentine Belt; 89.57 Long, 6 Rib Count (Part No.5060895)

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 99.65" Long, 8 Rib Count, Exact Fit (Part No.K080991HD)

Litens – Kit de courroie d’entrainement accessoire (Part No.LV999266B)

Yukon Gear – Seal Puller Tool (Part No.56063)

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 80.187" Long, 8 Rib Count, Exact Fit (Part No.K080797HD)

Gates – Micro-V« Serpentine Drive Belt (Part No.K061031)

Gates – Micro-V« Serpentine Drive Belt (Part No.K060966)

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 103.67" Long, 6 Rib Count, Exact Fit (Part No.K061031HD)

Gates – Micro-V« Serpentine Drive Belt (Part No.K080991)

Gates – Micro-V« Serpentine Drive Belt (Part No.K080797)

Gates – FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt (Part No.K060832HD)

ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000578722ACD)

Bando – Drive Belt (Part No.W10002440777BAN)

Mitsuboshi – Drive Belt (Part No.W1000200996MBL)

Gates – V-Ribbed Serpentine Belt: 83.755" Long, 6 Rib Count, Exact Fit (Part No.K060832)

Bando – Multi Rib (Serpentine) Belt (Part No.W100036807BAN)

Mitsuboshi – DRIVE BELT (Part No.W1000164181MBL)

Bando – Drive Belt (Part No.W10002440805BAN)

Gates – Micro-V« Serpentine Drive Belt (Part No.K060895)

Bando – Drive Belt (Part No.W10002440763BAN)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, .63" Diameter (Part No.A71877)

Dorman – Heater Hose Connector (Part No.800-403)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 8 Inch Length (Part No.87756)

Dorman – Molded Heater Hose: Steel (Part No.626-221)

Dayco – Molded Heater Hose; EPDM Rubber, 23/32 Inch Diameter, 11 Inch Length (Part No.87755)

Dorman – 90 Degree Molded Heater Hose: Steel, Direct Replacement (Part No.626-229)

Dorman – Heater Hose Connector (Part No.800-404)

Dorman – Molded Heater Hose: Rubber (Part No.626-219)

Gates – Quick-Lok½ Heater Hose Connector (Part No.28500)

Dorman – Molded Heater Hose: Aluminum (Part No.626-558)

Dayco – Molded Heater Hose; EPDM Rubber, 23/32 Inch Diameter, 21 Inch Length (Part No.87753)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 19 Inch Length (Part No.87754)

Dorman – Help – Heater Hose Connector 3/4 In. Tube x 5/8 In. Hose (Part No.47164)