1997 Ford Expedition Fuel Pumps

Essential 1997 Ford Expedition Fuel Pumps

Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)

Fuel Cap Tester Adapter

from

$39.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12419)

Fuel Cap Tester Adapter

from

$36.49
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Carquest Premium – Daytime Running Light Relay Connector (Part No.PTC1867)

Daytime Running Light Relay Connector

from

$87.99
Daytime Running Light Relay Connector

Carquest Premium – Fuel Pump Module Assembly (Part No.E2361M)

Fuel Pump Module Assembly

from

$229.99


Product Features:
  • All CARQUEST fuel pumps are designed to meet or exceed OE specs and are 100% tested to ensure performance and long-life.
  • High-efficiency turbine technology provides quiet and precise fuel delivery
  • Carbon commutator technology provides improved durability and robust performance for gasoline and flexible fuel
  • CARQUEST fuel pump features external rubber feet for enhanced stability and reduced noise from vibration.
  • CARQUEST Fuel Pump has modified return porting to increase flow resulting in lower failure rates. Upgraded convoluted tubing improves durability to resist tube wear failure and create longer life.
  • CARQUEST strainer uses polyester material to ensure filtration performance meet or exceed OE requirements.
See More

KAI – Fuel Pump Module Assembly (Part No.FMD010485)

Fuel Pump Module Assembly

from

$269.99
New Platinum Pro Fuel Module For Models With 5.4L V8

Product Features:
  • 5.4L V8
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Delphi – Electric Fuel Pump: With Hose Clamps, Insulating Sleeve, Jump Harnesss, Retaining Clips, Seals (Part No.FE0479)

Electric Fuel Pump: With Hose Clamps, Insulating Sleeve, Jump Harnesss, Retaining Clips, Seals

from

$109.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Improved pump performance as a result of Delphi’s innovative design and durability
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Part is validated, tested and matched to the right vehicle application
  • Lower amperage draws less load on vehicle’s electrical system
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Always replace the fuel strainer when doing a fuel pump repair
See More

Delphi – Series 7000 Fuel Module (Part No.E3001418515DEL)

Series 7000 Fuel Module

from

$400.86
Fuel modules are designed to provide uninterrupted flow of fuel to the engine at system pressure. Depending on customer needs, the Delphi Series 7000 Fuel Module can integrate a pump, fuel level sensor, fuel filter, reservoir with active and passive filling mechanisms, and regulator in a compact, modular package that is easy to install. The Delphi Series 7000 Fuel Module also offers an in-tank fuel filter with 10-12 µm filtration. The Delphi Series 7000 Fuel Module provides superior low fuel handling and fuel level sensing performance with its enhanced bottom reference design. It also offers reduced noise levels and improved pump durability compared to conventional fuel modules. The simplicity of design also results in lower cost. This module is targeted to meet California ZEV requirements.

Product Features:
  • Acetal cover can accommodate 116mm tank opening to permit integrated filter in reservoir
  • Single stage turbine pump provides quiet, energy efficient operation
  • Active reservoir-fill mechanism (high pressure jet pump) to maintain fuel supply in reservoir
  • Passive reservoir fill mechanism helps fill the reservoir at low-fuel volumes
  • High capacity filter media helps supply clean fuel to the injection system
  • Available serviceable in-tank fuel filter for markets with poor quality fuels
See More

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG0860)

Fuel Pump Module Assembly: With Float Arm, Seal

from

$357.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Delphi – Fuel Pump Hanger Assembly: With Float Arm, Seal, Retainer Clips (Part No.HP10133)

Fuel Pump Hanger Assembly: With Float Arm, Seal, Retainer Clips

from

$277.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Lower failure rates due to its innovative design and durability
  • Part is validated, tested and matched to the right vehicle application
  • Lower amperage draws less load on vehicle’s electrical system
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
See More

Delphi – Fuel Pump Hanger Assembly: With Float Arm, Seal, Retainer Clips (Part No.HP10074)

Fuel Pump Hanger Assembly: With Float Arm, Seal, Retainer Clips

from

$281.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Lower failure rates due to its innovative design and durability
  • Part is validated, tested and matched to the right vehicle application
  • Lower amperage draws less load on vehicle’s electrical system
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
See More

Dorman – Rivet-Screw In-Hole Diameter .250 In-Head Diameter 1 In-Length .900 In (Part No.961-055)

Rivet-Screw In-Hole Diameter .250 In-Head Diameter 1 In-Length .900 In

from

$3.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)

Electric Fuel Pump Inertia Switch

from

$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Delphi – Fuel Pump Strainer (Part No.FS0108)

Fuel Pump Strainer

from

$21.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Filtration performance and micron rating meet or exceed OE requirements
  • OE replacement strainer designed for use with Delphi electric fuel pumps
  • Replacing the strainer is always recommended when replacing a fuel pump
See More

Carquest Premium – Fuel Pump Strainer FS2313052 (Part No.FS2313052)

Fuel Pump Strainer FS2313052

from

$13.49
CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

1997 Ford Expedition Fuel Pumps

Maybe you’re in the middle of a full rebuild of that 1997 Ford Expedition. Maybe you just need a couple of Fuel Pumps. Either way, Advance Auto Parts has 22 different Fuel Pumps in our inventory ranging from $3.49 to $323.44. That means you can find the exact parts or products you need to keep that 1997 Ford Expedition running smoothly.

Fuel Pumps are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1997 Ford Expedition. Carquest Premium, Delphi, and DENSO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Fuel Pumps for your 1997 Ford Expedition, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 51 reviews in this category, some of the top rated parts include Fuel Pump with 3.0 stars.

So if you’re in the market for aftermarket Fuel Pumps to keep your 1997 Ford Expedition rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Fuel Pumps Brands To Make Your 1997 Ford Expedition Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1997 Ford Expedition demands trusted brand parts and products to keep it running. Many trusted brands of Fuel Pumps make up Advance Auto Parts’ inventory, and all are ready to help make your Expedition the best it can be. Be sure to browse some of our top Fuel Pumps brands and parts.

Popular Delphi Fuel Pumps

We carry Delphi parts in our stock across Electric Pump Filter and Strainers and Fuel Pump Hanger Assemblies categories, plus more. For a 1997 Ford Expedition, our most popular Delphi Fuel Pumps include:
Fuel Pump Strainer
from $21.99
(1)
Fuel Pump Strainer
Electric Pump Filter and Strainers
Fuel Pump Hanger Assembly: With Float Arm, Seal, Retainer Clips
from $281.99
(1)
Fuel Pump Hanger Assembly: With Float Arm, Seal, Retainer Clips
Fuel Pump Hanger Assemblies

FAQs for 1997 Ford Expedition Fuel Pumps

What are the most purchased Fuel Pumps for the 1997 Ford Expedition?

Out of 22 Fuel Pumps for the 1997 Ford Expedition, the most popular in our inventory are:
Fuel Pump: Includes Wiring Harness
from $56.99
This product is not rated
Fuel Pump: Includes Wiring Harness
Fuel Pumps
Original Equipment Quality Electric Fuel Pump
from $124.99
(3)
Original Equipment Quality Electric Fuel Pump
Fuel Pumps
Fuel Pump Strainer FS2313052
from $13.49
This product is not rated
Fuel Pump Strainer FS2313052
Electric Pump Filter and Strainers

What are the top-rated 1997 Ford Expedition Fuel Pumps?

Top-rated Fuel Pumps for your 1997 Ford Expedition based on customer reviews/ratings are:
Fuel Pump
from $85.99
(3)
Fuel Pump
“Needed to splice the wiring adapter supplied with the new pump. Adapter supplied had reverse polarity, pump ran backwards. Make sure to check polarity”