1997 Ford Crown Victoria Air Conditioning Parts

Essential 1997 Ford Crown Victoria Air Conditioning Parts

Carquest Premium – HVAC Temperature Control Switch Connector (Part No.PTA2069)

HVAC Temperature Control Switch Connector

from

$36.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

KAI – A/C Compressor; Fs10; 6 Groove; V8 Engine (Part No.ACP010012)

A/C Compressor; Fs10; 6 Groove; V8 Engine

from

$302.99
New Standard Replacement A/C Compressor, FS10, 6 Groove, V8 Engine

Product Features:
  • FS10, 6 Groove, V8 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – A/C Evaporator Core (Part No.EVA010222)

A/C Evaporator Core

from

$256.99
New Standard Replacement A/C Evaporator Core, V8 Engine

Product Features:
  • V8 Engine, Made Of Aluminum delete
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T56386)

A/C Discharge Line Hose Assembly

from

$124.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC1442)

ABS Wheel Speed Sensor

from

$39.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better than OE provide durability and long service life
  • All ABS sensors are tested for proper fit, form, and function
  • Wire diameter and sheathing same or larger than OE to ensure product quality
  • Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
  • Includes all necessary brackets and hardware
See More

Dorman – Chrysler, Ford, GM Panel Retainer, Pack of 3 (Part No.963-058D)

Chrysler, Ford, GM Panel Retainer, Pack of 3

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function & versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
  • Pack of 3
See More

Motorcraft – A/C Pressure Switch (Part No.R1054836769MTR)

A/C Pressure Switch

from

$52.11
When servicing air conditioning systems, choose Motorcraft climate-control components. They offer quality at a great value and are the only climate-control components recommended by Ford Motor Company.

Product Features:
  • All parts meet original equipment requirements for fit, finish and durability
  • Specifically engineered for Ford and Lincoln vehicles
  • Durability tested to meet demanding original equipment service life specifications
  • Helps maintain original performance standards
See More

Motorcraft – A/C Compressor Clutc (Part No.R1202680526MTR)

A/C Compressor Clutc

from

$19.54
A/C Compressor Clutc

Carquest Premium – A/C Liquid Line Hose Assembly without Orifice Tube (Part No.T56920)

A/C Liquid Line Hose Assembly without Orifice Tube

from

$39.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

KAI – A/C System Seal Kit (Part No.FTT010016)

A/C System Seal Kit

from

$19.99
New Standard Replacement A/C System Seal Kit, MT2520, L4 Engine

Product Features:
  • MT2520, L4 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Santech – A/C O-Ring Kit (Part No.R1151317274SII)

A/C O-Ring Kit

from

$21.00
A/C O-Ring Kit

Factory Air – Green Round O-Ring (Part No.24650)

Green Round O-Ring

from

$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Motorcraft – A/C Relief Valve (Part No.R1028680239MTR)

A/C Relief Valve

from

$46.38
A/C Relief Valve

Santech – HVAC Pressure Switch (Part No.R2075835410SII)

HVAC Pressure Switch

from

$13.62
HVAC Pressure Switch

KAI – A/C Accumulator (Part No.ACM010183)

A/C Accumulator

from

$35.99
New Standard Replacement A/C Accumulator, V8 Engine

Product Features:
  • V8 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C Condenser (Part No.1133)

A/C Condenser

from

$125.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
See More

Carquest Premium – A/C Compressor and Component Kit (Part No.4985K)

A/C Compressor and Component Kit

from

$401.99
Save time on installation with everything you need in one box for an air conditioning replacement. The Carquest Premium A/C Compressor and Component Kit includes the necessary compressor, accumulator/receiver drier, and orifice tube/expansion valve, along with the necessary O-rings, gaskets, and oil. The parts are manufactured with strict quality standards from Gilmore, a climate control partner to Advance Auto Parts for over 25 years.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators are helium leak tested prior to packaging.
  • Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • The specific PAG oil required by your vehicle application is included.
  • O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.
See More

KAI – Valve Core/Cap Kit (Part No.FTT010108)

Valve Core/Cap Kit

from

$16.99
New Standard Replacement A/C System Valve Core And Cap Kit

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Help – Air Conditioning Bypass Pulley (Part No.34191)

Air Conditioning Bypass Pulley

from

$58.99
This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:
  • Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed.
  • Durable components – this bypass pulley uses quality components for a long service life
  • Easy to install – uses the same mounting points as the A/C compressor
  • Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
See More

Carquest Premium – A/C New, with Clutch, with FS18 Compressor (Part No.T68185)

A/C New, with Clutch, with FS18 Compressor

from

$396.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
  • Matched high-quality needle-roller bearing ensures low friction and high load capability.
  • Light weight aluminum energy-saving casting used for construction.
See More

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T56557)

A/C Suction Line Hose Assembly

from

$61.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Motorcraft – Motorcraft A/C Clutch Solenoid (Part No.R1015196677MTR)

Motorcraft A/C Clutch Solenoid

from

$41.03
When servicing air conditioning systems, choose Motorcraft climate-control components. They offer quality at a great value and are the only climate-control components recommended by Ford Motor Company.

Product Features:
  • All parts meet original equipment requirements for fit, finish and durability
  • Specifically engineered for Ford and Lincoln vehicles
  • Durability tested to meet demanding original equipment service life specifications
  • Helps maintain original performance standards
See More

Dorman – Help – Air Conditioning Service Port Caps (Part No.54374)

Air Conditioning Service Port Caps

from

$8.99
This A/C service valve cap is designed to match the fit and function of the original cap on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this A/C service valve cap is designed to match the fit and function of the original cap on specified applications.
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Fuel Pump Relay Connector (Part No.PTA1277)

Fuel Pump Relay Connector

from

$14.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – HVAC Pressure Switch (Part No.ABA1022)

HVAC Pressure Switch

from

$21.99
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
  • All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.
See More

Motorcraft – REGULATOR AND MTR (Part No.WPT-439)

REGULATOR AND MTR

from

$39.99
REGULATOR AND MTR

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26715)

O-Ring & Gasket A/C System Seal Kit

from

$20.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • Application specific
  • SUV and rear air applications
See More

Factory Air – New Ford Scroll Clutch Assembly w/ Coil (Part No.47885)

New Ford Scroll Clutch Assembly w/ Coil

from

$139.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All mounting hardware included
  • Every coil tested for proper ohms
  • Vehicle specific applications
  • Coated to prevent corrosion
See More

1997 Ford Crown Victoria Air Conditioning Parts

Maybe you’re in the middle of a full rebuild of that 1997 Ford Crown Victoria. Maybe you just need a couple of Air Conditioning Parts. Either way, Advance Auto Parts has 55 different Air Conditioning Parts in our inventory ranging from $0.99 to $302.99. That means you can find the exact parts or products you need to keep that 1997 Ford Crown Victoria running smoothly.

Air Conditioning Parts are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1997 Ford Crown Victoria. Carquest Premium, Dorman, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Air Conditioning Parts for your 1997 Ford Crown Victoria, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,052 reviews in this category, some of the top rated parts include A/C New, with Clutch, with FS10 Compressor with 3.6 stars and Cap and Valve A/C System Seal Kit with 3.4 stars.

So if you’re in the market for aftermarket Air Conditioning Parts to keep your 1997 Ford Crown Victoria rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Air Conditioning Parts Brands To Make Your 1997 Ford Crown Victoria Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1997 Ford Crown Victoria demands trusted brand parts and products to keep it running. Many trusted brands of Air Conditioning Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Crown Victoria the best it can be. Be sure to browse some of our top Air Conditioning Parts brands and parts.

Top 1997 Ford Crown Victoria Air Conditioning Parts from Carquest Premium

Carquest Premium products are another trusted brand when it comes to Air Conditioning Parts for your 1997 Ford Crown Victoria. Popular Carquest Premium parts include:
A/C Orange Orifice Tube
from $4.99
(97)
A/C Orange Orifice Tube
Expansion Valve and Orifice Tubes
A/C Severe Temp Automatic Adjusting Orifice Tube
from $15.99
(97)
A/C Severe Temp Automatic Adjusting Orifice Tube
Expansion Valve and Orifice Tubes
A/C Standard Temp Automatic Adjusting Orifice Tube
from $15.79
(28)
A/C Standard Temp Automatic Adjusting Orifice Tube
Expansion Valve and Orifice Tubes

FAQs for 1997 Ford Crown Victoria Air Conditioning Parts

What are the most purchased Air Conditioning Parts for the 1997 Ford Crown Victoria?

Out of 55 Air Conditioning Parts for the 1997 Ford Crown Victoria, the most popular in our inventory are:
Chrysler, Ford, GM Panel Retainer, Pack of 3
from $4.49
(1)
Chrysler, Ford, GM Panel Retainer, Pack of 3
AC Line Clip
Cap & Valve A/C System Seal Kit
from $17.99
(29)
Cap & Valve A/C System Seal Kit
AC Line O-Rings
A/C and Heater Relay
from $23.29
(24)
A/C and Heater Relay
AC Compressor Cut-Out Relays

What are the top-rated 1997 Ford Crown Victoria Air Conditioning Parts?

Top-rated Air Conditioning Parts for your 1997 Ford Crown Victoria based on customer reviews/ratings are:
A/C New, with Clutch, with FS10 Compressor
from $243.99
(22)
A/C New, with Clutch, with FS10 Compressor
“It was compatible with the rest of the system and seems to be working fine”
Cap and Valve A/C System Seal Kit
from $25.99
(5)
Cap and Valve A/C System Seal Kit
“Only needed 4 pieces, many spares”
Bearings
from $54.99
(3)
Bearings
“FORD ESCAPE WAS MAKE A LOUD SQUEAKING NOISE, SOUNDED LIEK A BELT OR TENSIONER , BUT WAS ACTUALLY A FAILE D BEARING ON THE A/C CLUTCH. ADVANCE HAD THE ”