1997 Ford Aerostar Transmission Electrical Parts

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels. The Transmission Pressure Control Solenoid controls the flow of fluid in the various hydraulic circuits.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Precision-wound coated copper windings increase product durability and life cycle.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

AT SPEED SENSOR

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• O-rings or seals are included (where applicable)
• Magnet size and strength optimized for precise signal output.
• Weather-tight connectors prevent leaks and corrosion for longer life
• Extensive design validation testing and 100% end-of-line tested
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• O-rings or seals are included (where applicable)
• Magnet size and strength optimized for precise signal output.
• Weather-tight connectors prevent leaks and corrosion for longer life
• Extensive design validation testing and 100% end-of-line tested
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

This direct replacement ABS wheel speed sensor matches the fit and function of an original equipment sensor. Made of quality materials with factory-style electrical connectors, this sensor has been designed and tested to be durable and reliable.

Product Features:

• Ideal replacement – this ABS wheel speed sensor exactly matches the fit and function of the original equipment sensor to restore safe braking performance in all conditions
• Durable construction – this wheel speed sensor is made from quality materials to ensure a reliable repair and a long service life
• Cost-effective solution – offers original equipment quality at a competitive price
• Quality tested – this ABS sensor has undergone try-on and material testing to ensure a quality fit and reliable performance

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

• Delphi sensors are built to meet or exceed OE requirements and testing
• Delphi has improved the OE design by plating the connectors to help prevent corrosion and failure commonly caused by internal and cable short circuits
• Delphi’s OE design helps by preventing mechanical damage to the sensor wheel, soiling and increased wheel bearing free play
• Speed sensors maintain optimal performance during drastic temperature changes for robust, long lasting sensor protection
• Designed digital output for maximum signal to noise ratio

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

• High grade materials that are equal to or better than OE provide durability and long service life
• All ABS sensors are tested for proper fit, form, and function
• Wire diameter and sheathing same or larger than OE to ensure product quality
• Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
• Includes all necessary brackets and hardware

The ABS or Anti-Lock Brake System ECU monitors the Wheel Speed Sensors rotational speed for anti-lock brake function, stability control and traction control. The ABS sensors report the speed of all four wheels to the ECU to determine if the wheels are locking up and to help provide safer stopping. Reasons for replacement include: ABS/brake lamp illumination, no or erratic ABS operation or problems with stability and or traction control systems.

Product Features:

• OE MATCHED: Manufactured to OE performance standards. Connectors, mounts and wire lengths are exact match to OE for worry free installation.
• INSTALLATION AND SUPPORT: Includes all necessary brackets and hardware. Application specific harness length
• THE DIFFERENCE: Glass reinforced plastic for better contamination resistance. Weather pack connectors prevent dirt and moisture contamination. Grease, mounting nut and instruction sheet included where applicable.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• O-rings or seals are included (where applicable)
• Magnet size and strength optimized for precise signal output.
• Weather-tight connectors prevent leaks and corrosion for longer life
• Extensive design validation testing and 100% end-of-line tested
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Product Features:

• OE MATCH: Manufactured to operational performance standards to meet or exceed OE fit, for and function to ensure proper monitoring of the transmission’s output shaft speed. Sensor output signal matches OE specifications.
• THE DIFFERENCE: High strength thermoplastic is resistant to temperature, moisture and chemicals. Pre-installed O-ring precisely matches OE material and diameter for ease of installation and superior sealing.

The vehicle speed sensor is an input to the transmission control module (TCM) or powertrain control module (PCM) reporting the speed of the input shaft, intermediate shaft, or output shaft of the transmission. The control module uses this input to monitor the operation of the transmission and to detect excessive slippage should it occur.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
• Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Magnet size and strength optimized for precise signal output.
• Where applicable precision-wound coated copper windings increase signal output and increase longevity.
• Tailored magnetic circuit programming enhances timing accuracy between the reluctor wheel and circuit output.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.