1997 Chevrolet K3500 Differentials

Find your specific 1997 Chevrolet K3500 original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1997 Chevrolet K3500 Differentials

from

$42.99

Product Features:

Side gear spacer sleeve
Fits GM 9.25″ IFS

from

$199.99

Product Features:

Fits Dana Spicer 80
Steel

from

$613.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits 2010 and down GM 9.25″ IFS
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and silicone.

from

$589.99

9.25″ IFS & 9.5″ case standard Open, loeaded.

Product Features:

Standard open carrier case and spiders
Fits GM 9.25″ IFS and 9.5″

from

$31.99

Adjuster lock bolt for left hand case half of 7.2″ and 9.25″ GM IFS.

Product Features:

Side adjuster lock bolt
Fits GM 7.2″ IFS and 9.25″ IFS

from

$12.99

GM 9.5″ ring gear bolt. 12mm x 1.5.

Product Features:

Ring gear bolt for GM 9.2″
12mm x 1.5

from

$5.99

DiffrlPinSupportBolt

from

$11.99

Product Features:

CRUSH SLEEVE 14 BOLT 10.5 3116

from

$11.44

Differential Drain P

from

$16.99

Product Features:

Pinion depth shims for Dana Spicer 70 and 70HD, Ford 10.25″ and 10.5″

from

$883.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings

from

$6.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$304.99

Yukon 1480 Lifetime Series U/Joint. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.

Product Features:

Clutch kit
Fits GM 10.5″ 14 bolt truck with Eaton positraction
Carbon fiber clutches

from

$5.99

Product Features:

Pinion nut washer
Fits Dana Spicer 80

from

$21.99

Left hand adjuster lock nut for 9.25″ GM.

Product Features:

Side adjuster lock nut
Fits GM 9.25″

from

$23.99

Replacement pinion nut for Dana 80, 1 7/8″ socket.

Product Features:

Pinion nut for Dana Spicer 80
1 7/8″ socket

from

$35.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$137.90

Differential Bearing

from

$172.99

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o

from

$7.99

Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:

Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
0.225″ diameter
1.870″ long

from

$1168.99

Differential

from

$7.99

Differential Cover B

from

$99.99

Standard Open cross pin shaft for four pinion design for GM 14T.

Product Features:

Cross pin shaft
Fits GM 10.5″ 14 bolt truck

from

$1003.99

Yukon Performance steel spool for 8Dana 80 with 37 spline axles, 4.10 & up. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler Dana Spicer 80 with 37 spline axles
4.10 and up ratio only
Provides 100% traction to both wheels at all times
Not recommended for street driven vehicles

from

$44.49

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

from

$15.99

O-ring for left hand carrier bearing adjuster for 9.25″ GM IFS.

Product Features:

Axle o-ring
Fits Chrysler 9.25″ IFS

from

$51.99

Pilot bearing for 10.5″ 14 bolt truck, 2.050″ O.D.

Product Features:

Pilot bearing
Fits GM 10.5″ 14 bolt truck
2.050″ O.D.

from

$27.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

Popular 1997 Chevrolet K3500 Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Ring and Pinions

Differential Cases

Differential End Yokes

Differential Spools

Differential Carrier Bearings

Differential Carrier Bearing Adjusters

Differential Pinion Bearing Kits

Complete Differentials

Differential Drain Plugs

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Housing O-Rings

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Gear Bearing Retainer Bolts

Differential Drive Pinion Oil Deflectors

Differential Pinion Gear Washers

Differential Ring and Pinion Kits

Differential Spider and Pinion Gear Kits

Limited Slip Differential Assemblies

Differential Bearing Adjuster Nut Lock Bolts

Maybe you’re in the middle of a full rebuild of that 1997 Chevrolet K3500. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 282 different Differentials in our inventory ranging from $1.89 to $2,969.99. That means you can find the exact parts or products you need to keep that 1997 Chevrolet K3500 running smoothly.

Differentials are only as good as their brand. We stock 16 different brands to make sure you have plenty of trusted parts to choose from for your 1997 Chevrolet K3500. National, Idemitsu, and Felpro are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1997 Chevrolet K3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 231 reviews in this category, some of the top rated parts include Bearings with 4.8 stars and Multi Purpose Seal with 4.2 stars.

So if you’re in the market for aftermarket Differentials to keep your 1997 Chevrolet K3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1997 Chevrolet K3500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1997 Chevrolet K3500 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your K3500 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Idemitsu Differentials

We carry Idemitsu parts in our stock across Differential Oil categories, plus more. For a 1997 Chevrolet K3500, our most popular Idemitsu Differentials include:

from $13.79

(3)

Type HP Automatic Transmission Fluid – 1 qt

Differential Oil

Top 1997 Chevrolet K3500 Differentials from National

National products are another trusted brand when it comes to Differentials for your 1997 Chevrolet K3500. Popular National parts include:

from $22.99

(12)

Bearings

Differential Bearings

from $34.99

(8)

Multi Purpose Seal

Differential Pinion Seals

from $6.99

(6)

Bearings

Differential Bearings

FAQs for 1997 Chevrolet K3500 Differentials

What are the most purchased Differentials for the 1997 Chevrolet K3500?

Out of 282 Differentials for the 1997 Chevrolet K3500, the most popular in our inventory are:

from $6.79

(13)

Differential Cover Gasket

Rear Differential Cover Gaskets

from $44.99

This product is not rated

3 Qt – Penzoil 80W90 Conventional Gear Oil

Differential Oil

from $38.49

(15)

Rear Differential Cover

Differential Covers

What are the top-rated 1997 Chevrolet K3500 Differentials?

Top-rated Differentials for your 1997 Chevrolet K3500 based on customer reviews/ratings are:

from $16.99

(6)

Bearings

“Fit perfectly. No difficulty replacing my old ones.”

from $44.99

(5)

Multi Purpose Seal

“How do you fix a leaking rear end? You seal it. That’s why I bought this seal.”

from $13.79

(4)

Taper Bearing Set

“Worked great on my 1981 Chevy C20”

1997 Chevrolet K3500 Differentials

More 1997 Chevrolet K3500 Differentials

Essential 1997 Chevrolet K3500 Differentials

Yukon Gear – GM Side Gear Spacer Sleeve For GM 9.25" IFS (Part No.33533)

Yukon Gear – Steel Cover For Dana 80 (Part No.32323)

USA Standard Gear – Master Overhaul Kit for the ’10 & Down GM 9.25" IFS Front Differential (Part No.37061)

Yukon Gear – Standard Open Carrier Case, GM 9.5" & 9.25" IFS, Loaded (Part No.20097)

Yukon Gear – Adjuster Lock Bolt For Left Hand Case Half Of 7.2" And 9.25" GM IFS (Part No.33244)

Yukon Gear – GM 9.5" Ring Gear Bolt (Part No.33047)

Yukon Gear – DiffrlPinSupportBolt (Part No.33582)

Motive Gear – Differential Crush Sleeve (Part No.3977355)

MTC – Differential Drain P (Part No.J7065587755MTC)

Yukon Gear – Replacement Pinion Depth Shims For Dana 70HD, Dana 70, Ford 10.25" & 10.5" (Part No.55013)

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

Felpro – Differential Cover Gasket (Part No.RDS 55063)

Yukon Gear – Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5" (Part No.16112)

Yukon Gear – Replacement Pinion Nut Washer For Dana 80 (Part No.33165)

Yukon Gear – Left Hand Adjuster Lock Nut For 9.25" GM (Part No.33354)

Yukon Gear – Replacement Pinion Nut For Dana 80 (Part No.33145)

National – Bearings (Part No.HM804846)

ACDelco – Differential Bearing (Part No.J7060366581ACD)

Motive Gear – Differential Carrier Gear Kit (Part No.707280XR)

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Yukon Gear – Differential (Part No.26045)

Yukon Gear – Differential Cover B (Part No.33572)

Yukon Gear – Standard Open Cross Pin Shaft For Four Pinion Design For GM 10.5" 14 Bolt Truck (Part No.33405)

Yukon Gear – Steel Spool For Dana 80 With 37 Spline Axles, 4.10 & Up (Part No.32173)

Motive Gear – Differential Gear Install Kit (Part No.GM10.5IKL-2)

Yukon Gear – O-Ring For Left Hand Carrier Bearing Adjuster For 9.25" GM IFS (Part No.33133)

Yukon Gear – Pilot Bearing For 10.5" 14 Bolt Truck, 2.050" O.D. (Part No.18041)

National – Shaft Repair Sleeve (Part No.99138)

Popular 1997 Chevrolet K3500 Differentials Categories