1997 Chevrolet Blazer Drive Shafts and Axles
More 1997 Chevrolet Blazer Drive Shafts and Axles
Find your specific 1997 Chevrolet Blazer original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1997 Chevrolet Blazer Drive Shafts and Axles
Driveworks – Axle Repair Bearing (Part No.S-RP-6408)
from
$24.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
NTN – Wheel Bearing (Part No.K8000345509NTN)
from
$87.01
Wheel Bearing
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)
from
$51.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
- Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Rear Drive Shaft: Greaseable (Part No.976-850)
from
$469.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Rear Drive Shaft (Part No.946-048)
from
$637.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
National – Bearings (Part No.207-L)
from
$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.HM88610)
from
$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Spicer – Universal Joint (Part No.5-760X)
from
$51.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Spicer – Universal Joint (Part No.5-160X)
from
$40.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Spicer – Universal Joint (Part No.5-178X)
from
$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10207)
from
$99.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10206)
from
$98.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10204)
from
$127.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
National – Multi Purpose Bearing (Part No.HB-88107-A)
from
$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.HB-206-FF)
from
$46.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.HB-88530)
from
$144.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6091)
from
$103.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 88-12; GMC 94-12;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1988-2012
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- WITHOUT PLATE
- WITH STUDS
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6027)
from
$5.29
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 87-97; GMC 67-05; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2012
- Weight approx: 1 Lbs
- CUSHION INSERT ONLY
- FOR COMPLETE MOUNT SEE PART 6056
SKF – Driveshaft Support with Bearing (Part No.K1030285149SKF)
from
$197.95
Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. They are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.
Product Features:
See More
Product Features:
- OE Quality, fit and performance
- Precise driveshaft alignment and support
- Pre-lubricated and sealed
- Metal reinforced seals to prevent contamination
- Manufactured from durable rubber compounds
SKF – Axle Seal (Part No.K4021285300SKF)
from
$7.11
SKF’s advanced PTFE oil seal offers optimum performance in extreme temperature and fluid environments. Other benefits of this seal include; reduced friction, longer service life, easier assembly, reduced weight and compact design.
Product Features:
See More
Product Features:
- Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
- The flanged design allows for easier and proper installation and helps avoid cocking.
- The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
- Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
National – Multi Purpose Seal (Part No.223255)
from
$12.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Axle Seal For ’88 And Newer GM 8.5" Chevy C10 (Part No.30108)
from
$11.99
Axle seal for ’88 and newer GM 8.5″ Chevy C10.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- Fits 1988 and up GM half ton truck
- 2.800″ O.D.
- 1.620″ I.D.
Dorman – Spindle Nut (Part No.K1002831647DOR)
from
$5.57
Spindle Nut
Driveworks – Axle Shaft Bearing (Part No.S-HK-4012)
National – Bearings (Part No.HK-4012)
from
$24.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.B-2012)
from
$22.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Clutch Release Bearing (Part No.S-SCH-208)
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-RP513067)
from
$37.49
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
Popular 1997 Chevrolet Blazer Drive Shafts and Axles Categories
1997 Chevrolet Blazer Drive Shafts and Axles
Maybe you’re in the middle of a full rebuild of that 1997 Chevrolet Blazer. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 45 different Drive Shafts and Axles in our inventory ranging from $1.99 to $1,609.99. That means you can find the exact parts or products you need to keep that 1997 Chevrolet Blazer running smoothly.
Drive Shafts and Axles are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1997 Chevrolet Blazer. National, Driveworks, and Spicer are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Drive Shafts and Axles for your 1997 Chevrolet Blazer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 181 reviews in this category, some of the top rated parts include CV Axle Shaft Assembly with 4.3 stars and CV Axle Shaft Assembly with 4.0 stars.
So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1997 Chevrolet Blazer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Drive Shafts and Axles Brands To Make Your 1997 Chevrolet Blazer Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1997 Chevrolet Blazer demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Blazer the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.
Popular National Drive Shafts and Axles
We carry National parts in our stock across Axle Shaft Seals and Drive Shaft Bearings categories, plus more. For a 1997 Chevrolet Blazer, our most popular National Drive Shafts and Axles include:
Top 1997 Chevrolet Blazer Drive Shafts and Axles from Driveworks
Driveworks products are another trusted brand when it comes to Drive Shafts and Axles for your 1997 Chevrolet Blazer. Popular Driveworks parts include:
FAQs for 1997 Chevrolet Blazer Drive Shafts and Axles
What are the most purchased Drive Shafts and Axles for the 1997 Chevrolet Blazer?
Out of 45 Drive Shafts and Axles for the 1997 Chevrolet Blazer, the most popular in our inventory are:
What are the top-rated 1997 Chevrolet Blazer Drive Shafts and Axles?
Top-rated Drive Shafts and Axles for your 1997 Chevrolet Blazer based on customer reviews/ratings are:
