1997 Cadillac DeVille Cooling and Climate Controls

Below you will find various in-demand Cadillac Cooling and Climate Controls, components and accessories for your 1997 DeVille. Advance Auto Parts has popular DeVille parts like Engine Cooling Parts, Blower Motor and Related Products, Air Conditioning Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other DeVille model years including 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 and more. Select a category of 1997 Cadillac DeVille Cooling and Climate Controls below and start saving instantly.

Popular 1997 Cadillac DeVille Cooling and Climate Controls Categories

Radiators

Water Pumps

AC Compressor With Clutch

Blower Motors

Engine Cooling Fan Controllers

Thermostat and Water Outlet Assemblies

Air Blend Door Actuators

AC Compressor Relays

Coolant Temperature Sensors

AC Condenser Fan Motors

Heater Cores

Coolant Reservoir Caps

Water Outlets

Engine Water Pump Gasket Kits

AC Harness Connectors

Air Conditioning Relays

AC Condensers

AC Compressor Bypass Pulleys

AC Line O-Rings

AC Compressor Cut-Out Relays

HVAC Automatic Temperature Control (ATC) Relays

AC Evaporators

Engine Coolant Thermostat O-Rings

AC Caps and Valve Core Kits

AC Liquid Lines

Thermostat Housings

HVAC Blower Motor Control Unit Connectors

AC Compressor Cut-Out Relay Harness Connectors

Water Pump Pulleys

AC Clutch Coil Connectors

Accumulator and Receiver Driers

AC Clutch Bearings

AC O-Ring and Gasket Kits

Blower Motor Resistor Connectors

Water Pump Gaskets

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

AC Compressor Control Valves

Radiator Drain Plugs

AC Compressor Cut-Off Switches

HVAC Blower Motor Connectors

AC Switch Connectors

AC Condenser Screw

Engine Water Pump Cover Gaskets

AC Refrigerant Temperature Sensors

Coolant Temp Sending Unit Switch Connectors

Radiator Cap Adapters

Water Pump O-Rings

AC Compressor Thrust Bearings

AC Compressor Seals

HVAC Heater Control Switch Connector

HVAC Evap, Heater, and Blower Module Connector

Engine Coolant Level Indicator Connectors

Temperature Sensor

AC Low Pressure Side Switches

AC Evaporator Tube O-Ring

AC Hose Bolt

AC Compressor Water Valve Solenoid Connectors

Essential Cooling and Climate Controls for 1997 Cadillac DeVilles

from

$17.99

Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$23.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248 Deg. F
For use with Imperial electric fans
Probe installs into radiator fins
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$5.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$92.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Rapid-Cool Thin-Line electric fans
16″ diameter
1,400 CFM
Use as a pusher or puller fan
Motors built and tested to quality specifications
16 in. universal fit reversible fan
1400 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$6.29

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$41.99

Make better electrical repairs and accessory installations with a Dorman pigtail connector. Designed for a clean appearance when installed, Dorman connectors are ideal for neatly securing wiring jobs in automotive, commercial, industrial and household applications. Our pigtails are constructed from quality materials for long service life and resistance to the elements, and offer a range of features including locking tabs, weatherproof seals and more, where applicable. Check the product details to choose the best product for your electrical wiring needs.

Product Features:

Ideal solution – this pigtail connector is designed to neatly connect to an idle control valve on specified vehicles
Ensure fit – check the product details to choose the best product for your needs
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$90.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$18.99

Carquest A/C Accessories provide a comprehensive offering of premium quality fittings and tools to service all aspects of an a/c service from the most simple fitting replacement to complex diagnostics required for late model applications.

from

$15.79

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$54.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$55.99

The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:

Indicates coolant temperature
Helps prevent coolant injuries
Fahrenheit and centigrade readings
Color-coded temperature ranges
Integrated coolant reclamation valve
Improves under-hood appearance
Chromed crown with a colored trim ring

from

$18.99

This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings

from

$30.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$11.49

GM Genuine Parts A/C Refrigerant Line Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$63.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$61.99

This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:

Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed
Durable components – this bypass pulley uses quality components for a long service life
Easy to install – uses the same mounting points as the A/C compressor
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$216.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$33.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$1.49

These nuts are manufactured using durable materials and corrosion tested to ensure required strength and longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$22.99

We are proud to offer this Carquest product line: Carquest Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:

Meets and/or exceeds OEM standard
Direct-fit replacement for ease of installation
Coated with corrosion and rust inhibitor
100% leak tested
Meets and/or exceeds OEM standard
Coated with corrosion and rust inhibitor
100% leak tested
Direct-fit replacement for ease of installation

from

$44.99

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$3.29

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$44.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Carquest.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$76.99

Damaged your engine water pump pulley? This pulley is a direct replacement for the original manufacturer’s part on specific vehicle years, makes and models, restoring proper performance.

Product Features:

Direct replacement – this engine water pump pulley matches the fit and function of the original part on specific vehicles
Durable design – built to withstand the elements and road debris
Thoroughly tested – must pass strict standards to ensure reliable longevity
Trustworthy quality – backed by team of engineers and inspectors in United States

from

$97.99

Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$92.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$59.99

GM Genuine Parts HVAC Pressure Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These HVAC pressure switches are a system protective switch that cuts off power to AC components if the pressure in the system is too low. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Protective switch that discontinues power to AC components when system pressures are too low
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$36.49

Driveworks Water Pumps offer a complete replacement part solution, with application coverage that spans from antique to present-day vehicles. All units are 100% tested and engineered to meet or exceed OEM performance, providing you a quality product you and your vehicle can rely on. All units are manufacturered with brand new components and are packaged with all gaskets required for replacement.

Product Features:

100% Factory tested for leakage and dimensional precision
Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling
Bearings made of heat-treated carbon or carburized steel are sealed and lubricated to ensure smooth performance throughout units life
Assembled with new, high-quality unitized shaft seals to prevent premature leakage
Supplied with gasket and other seals/gaskets as applicable per application to help complete the job
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation

Upgrade your 1997 Cadillac DeVille with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 1997 Cadillac DeVille, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Cooling and Climate Controls are key to keeping your DeVille functioning at its best. At Advance Auto Parts, we offer a wide selection of 110 Cooling and Climate Controls for the 1997 Cadillac DeVille, designed to meet your needs without breaking the bank. From Engine Cooling Part replacements to Blower Motor and Related Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 1997 Cadillac DeVille at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $1.49 to $266.99, with an average price of $48.33. Our 110 Cooling and Climate Controls in stock come from 16 trusted brands, so you’re sure to find the right part for your 1997 Cadillac DeVille without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1997 Cadillac DeVille, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Factory Air, Carquest Premium, Dorman, and more. Factory Air Cooling and Climate Controls start at just $15.99 and boast an impressive 4.4 stars average rating from customers. Carquest Premium and Dorman also bring quality to the table, with Cooling and Climate Controls available starting at $3.99, and at an average 4.4 stars rating. With 1,604 customer reviews and counting, our 1997 Cadillac DeVille Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1997 Cadillac DeVille is always ready to roll. We’re committed to providing you with everything you need to keep your DeVille in top shape, all in one place. Start shopping confidently below for your 1997 Cadillac DeVille!

Best-Selling Engine Cooling Parts for 1997 Cadillac DeVilles

Enhance the driving experience in your Cadillac with 37 quality Engine Cooling Part components, starting at $5.99.

show more show less

from

$23.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248 Deg. F
For use with Imperial electric fans
Probe installs into radiator fins
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$29.99

Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:

Delphi temperature sensors deliver accurate readings and optimal performance
Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
Each sensor is electrically insulated to eliminate interference from other components in the vehicle
Delphi temperature sensors are impervious to electrical noise and interference

from

$16.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$22.99

Meets and/or exceeds OEM standard
Direct-fit replacement for ease of installation
Coated with corrosion and rust inhibitor
100% leak tested
Meets and/or exceeds OEM standard
Coated with corrosion and rust inhibitor
100% leak tested
Direct-fit replacement for ease of installation

from

$10.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$13.49

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$23.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$76.99

Direct replacement – this engine water pump pulley matches the fit and function of the original part on specific vehicles
Durable design – built to withstand the elements and road debris
Thoroughly tested – must pass strict standards to ensure reliable longevity
Trustworthy quality – backed by team of engineers and inspectors in United States

from

$201.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$6.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$44.99

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$8.49

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$92.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Rapid-Cool Thin-Line electric fans
16″ diameter
1,400 CFM
Use as a pusher or puller fan
Motors built and tested to quality specifications
16 in. universal fit reversible fan
1400 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$59.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$6.29

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$108.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Rapid-Cool Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan
Motors built and tested to quality specifications
12 in. universal fit reversible fan
800 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$65.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$43.99

Manufactured to meet or exceed OEM specifications.

Product Features:

100% leak tested and hub-pull tested to promote a long, trouble-free performance life
Designed and manufactured with new, high-quality unitized seals from OE suppliers to ensure long, trouble-free performance
Each unit uses the proper bearing design as specified by the OE manufacturer to meet the specific radial torque and axial load requirements of each application to promote long bearing life and trouble-free performance
Supplied with high-quality mounting gasket and other seals/gaskets as applicable per application to help complete the job
Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling

from

$46.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Preset thermostatic fan control
185 Deg. F preset
For use with Imperial electric fans
Probe installs into radiator fins
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$51.99

Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Product Features:

Indicates Coolant Temperature
Helps to Prevent Injuries from coolant or steam burns
Integrated Coolant Reclamation Valve
Improves Underhood Appearance
Fahrenheit and centigrade readings
Various valve pressures available

from

$69.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Adjustable thermostatic fan control
160 Deg. F – 210 Deg. F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$26.99

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
O-rings, seals or thread sealant are included if required
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$34.99

UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resitance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components.

Product Features:

Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$9.99

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

Most Popular 1997 Cadillac DeVille Blower Motor and Related Products

Customize your Cadillac with 5 Blower Motor and Related Products products like Blower Motors, Blower Motor Resistor Connectors, and HVAC Blower Motor Connectors, all priced under $209.99.

show more show less

from

$90.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$209.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$55.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$63.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$36.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Top Picks for 1997 Cadillac DeVille Air Conditioning Parts

Upgrade Cadillac DeVilles with top-quality Air Conditioning Parts parts, including 63 OEM and aftermarket selections for your 1997 model.

show more show less

from

$14.99

GM Genuine Parts A/C System Valve Cores are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These A/C system valve cores are components of the A/C service valve through which your vehicle’s refrigerant can be accessed and serviced. The valve core is a spring-loaded poppet valve that is opened when the service technician connects the A/C service machine hose couplers. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Repair leaking A/C system, restore A/C function
Helps restore A/C Function
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$3.99

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$15.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications
All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$34.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$41.99

Ideal solution – this pigtail connector is designed to neatly connect to an idle control valve on specified vehicles
Ensure fit – check the product details to choose the best product for your needs
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$3.29

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$19.99

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$36.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$27.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Precision engineered
OE style molded connectors
Quality contacts ensure proper conductivity
Vehicle specific applications

from

$18.99

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific
All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$49.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Carquest.

Product Features:

Matches the OE performance
Long life and reliability
Allows for different size wheels
Vehicle specific applications
Matches the OE performance
Long life and reliability
Allows for different size wheels
Vehicle specific applications

from

$19.79

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$31.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$266.99

This premium new compressor improves upon the original equipment design by providing two additional pistons and a center seal lip to prevent a center seal leak created by road conditions. Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure a smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
Matched high-quality needle-roller bearing ensures low friction and high load capability.
Light weight aluminum energy-saving casting used for construction.

from

$61.99

This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:

Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed
Durable components – this bypass pulley uses quality components for a long service life
Easy to install – uses the same mounting points as the A/C compressor
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$22.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$4.99

These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$15.79

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$16.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$29.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$32.99

GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps connect or disconnect power to vehicle accessories
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$46.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$18.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$30.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

In-Demand Heating Parts for 1997 Cadillac DeVilles

Select from 1 premium Heating Parts parts for your 1997 Cadillac DeVille.

show more show less

from

$82.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

Most Sold 1997 Cadillac DeVille Blend Doors

Explore our best-selling Cadillac parts for the 1997 DeVille among 3 OEM and aftermarket options starting from $33.99.

show more show less

from

$97.99

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$33.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$143.99

ACTUATOR

Top-Rated Cooling and Climate Controls Brands For Your 1997 Cadillac DeVille

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 1997 Cadillac DeVilles. Below you’ll find some of our best rated Cooling and Climate Controls from Factory Air, Carquest Premium, and Dorman, and more. Cooling and Climate Controls from these brands that fit a 1997 DeVille start at just $3.99 and are rated as high as 4.4 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Factory Air 1997 Cadillac DeVille Cooling and Climate Controls

When it comes to maintaining or upgrading your 1997 Cadillac DeVille, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Factory Air ticks all of those boxes. We offer a wide selection of Factory Air Cooling and Climate Controls, specifically designed for the 1997 Cadillac DeVille. With over 3 Factory Air brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $15.99, with an average price of just $29.16. Plus, with over 16 customer reviews and an average rating of 4.4 stars, you can trust that our Factory Air Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $36.99

(10)

Compressor Mounted High Cut-Out Pressure Switch

“AC high pressure switch work perfect”

from $15.99

(5)

O-Ring & Gasket A/C System Seal Kit

“Worked well for my 2000 Pontiac Bonneville SE.”

from $34.49

(1)

Compressor Mounted Low Cut-Out Pressure Switch

“It was the problem new on mad ac work”

Popular Carquest Premium 1997 Cadillac DeVille Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 1997 Cadillac DeVille owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1997 DeVille, Advance Auto Parts carries a full inventory of 3 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $3.99 to $22.99, plus, with more than 110 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from $22.99

(1)

Coolant Housing/Water Outlet

“Seems like a part that everyone should have, stock GM! But Advance was the only one! Think this will be my go to place. Great part, fast friendly serv”

from $10.99

(103)

Radiator Cap: 16 PSI

“A+++”

from $3.99

(6)

A/C Yellow White Orifice Tube

“Worked perfectly”

FAQs for 1997 Cadillac DeVille Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 1997 Cadillac DeVilles?

Out of 110 Cooling and Climate Controls that fit 1997 Cadillac DeVilles, the following parts are the top sellers:

Radiator Cap: 16 PSI (17110037) – $13.49
Body Bolt – M6-1.0 X 25mm (11910833) – $4.99
Coolant Temperature Sensor (12422735) – $26.99

What’s the price range for 1997 Cadillac DeVille Cooling and Climate Controls?

Cooling and Climate Control prices for the 1997 Cadillac DeVille start at $1.49 and go up to $266.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 1997 Cadillac DeVille?

The average price for Cooling and Climate Controls for the 1997 Cadillac DeVille is $48.33. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Cadillac DeVille model years?

Yes, we currently carry Cooling and Climate Controls for 51 model years of Cadillac DeVilles between 1953 and 2005. Cooling and Climate Controls are bought most frequently for the following model years: 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1998, and 1996.

What are the cheapest Cooling and Climate Controls for my 1997 Cadillac DeVille?

The cheapest 1997 Cadillac DeVille Cooling and Climate Controls we carry in stock are:

Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (22141637) – $1.49
Green Round O-Ring (sold by each) (18890169) – $1.99
A/C Orifice Tube (11745065) – $1.99
A/C Orifice Tube (11745060) – $2.99
A/C White Orifice Tube (10052818) – $3.29

What are the top-rated Cooling and Climate Controls that fit the 1997 Cadillac DeVille?

Out of 1,604 reviews by customers, our 1997 Cadillac DeVille Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 1997 Cadillac DeVille and their top-rated products:

Engine Cooling Parts
- Engine Coolant Temperature Sensor (25987687) – $29.99
- Adjustable Thermostatic Fan Control (6016936) – $23.99
- Coolant Housing/Water Outlet (10001213) – $22.99
Blower Motor and Related Products
- Engine Coolant Temperature Sensor (25987687) – $29.99
- Adjustable Thermostatic Fan Control (6016936) – $23.99
- Coolant Housing/Water Outlet (10001213) – $22.99

What types of Cooling and Climate Controls do you sell for my 1997 Cadillac DeVille?

As of 11/2/25, these are some of the most in-demand types of Cooling and Climate Controls for a 1997 Cadillac DeVille:

Can I get help with 1997 Cadillac DeVille Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Cooling and Climate Controls and more.

What is your return policy for Cadillac DeVille Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Cadillac DeVille Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1997 Cadillac DeVille Cooling and Climate Controls

Motorad – Thermostat Kit: Includes Housing, Thermostat and Gasket, 195 Degrees (Part No.4995KT)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Felpro – Engine Water Pump Gasket (Part No.35987)

Imperial – Electric Fan, 16" Diameter (Part No.226116)

Felpro – Multi-Purpose O-Ring (Part No.35346)

Dorman – Pigtail -Evap. Canister Vent Valve Solenoid, Red, 2-way with Leads (Part No.645-631)

GM Genuine Parts – 4-Way Female Gray Multi-Purpose Pigtail (Part No.PT1231)

Carquest Premium – A/C Valve Core/Cap (Part No.T26775)

Driveworks – Electrical Relay (Part No.83265)

Carquest Premium – Blower Motor: with Wheel (Part No.35342)

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

Dorman – Coolant Housing/Water Outlet: with Housing and Gasket, 90 Degree Neck Angle (Part No.902-2010)

Carquest Premium – A/C Refrigerant Temperature Sensor (Part No.ABA1039)

GM Genuine Parts – Air Conditioning Evaporator Fitting Gasket (Part No.15-2722)

Carquest Premium – Multi-Use Connector (Part No.PTA1344)

Dorman – Help – Air Conditioning Bypass Pulley (Part No.34209)

Carquest Premium – Radiator: With Engine And Transmission Oil Coolers (Part No.433856)

GM Genuine Parts – 2-Way Female Black Multi-Purpose Pigtail (Part No.PT110)

Dorman – Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (Part No.700-251)

Carquest Premium – Coolant Housing/Water Outlet (Part No.85284)

Felpro – Engine Water Pump Installation Kit (Part No.ES 72758)

Carquest Premium – A/C White Orifice Tube (Part No.T38623)

Carquest Premium – 2 Pole Radiator Fan Motor (Part No.35656)

Dorman – Engine Water Pump Pulley (Part No.300-940)

Carquest Premium – A/C Discharge and Suction Line Hose Assembly (Part No.T56169)

Carquest Premium – Multi-Use Connector (Part No.PTC1194)

GM Genuine Parts – Air Conditioning Refrigerant Pressure Switch (Part No.15-50812)

Driveworks Water Pumps – Water Pump: New, Installation Gasket Included (Part No.58-329)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Delphi – Engine Coolant Temperature Sensor (Part No.TS10075)

Felpro – WATER PUMP GASKET SET (Part No.35656)

Carquest Premium – Coolant Housing/Water Outlet (Part No.85284)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10230)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10330)

Carquest Premium – Standard Thermostat: With Seal, 180 Degrees (Part No.14228)

Dorman – Engine Water Pump Pulley (Part No.300-940)

Carquest Premium – Radiator: With Engine And Transmission Oil Coolers (Part No.432386)

Felpro – WATER PUMP GASKET SET (Part No.35794)

Felpro – Engine Water Pump Installation Kit (Part No.ES 72758)

Dorman – Help – Radiator Drain Cocks (Part No.61109)

Imperial – Electric Fan, 16" Diameter (Part No.226116)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1163)

Felpro – Multi-Purpose O-Ring (Part No.35346)

Imperial – Electric Fan, 12" Diameter (Part No.226112)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Driveworks Water Pumps – Water Pump (Part No.58-512)

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1001)

Motorad UltraStats – Thermostat: With Seal, 180 Degrees (Part No.5339-180)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10226)

GM Genuine Parts – 4-Way Female Gray Multi-Purpose Pigtail (Part No.PT1231)

Carquest Premium – Blower Motor: with Wheel (Part No.35121)

Carquest Premium – HVAC Blower Motor Resistor Connector (Part No.FAA1161)

Carquest Premium – Multi-Use Connector (Part No.PTA1344)

Carquest Premium – Multi-Use Connector (Part No.PTA2375)

GM Genuine Parts – Air Conditioning System Valve Core (Part No.15-1119)

Carquest Premium – A/C Yellow White Orifice Tube (Part No.T38887)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26731)

Factory Air – Compressor Mounted Low Cut-Out Pressure Switch (Part No.35970)

Dorman – Pigtail -Evap. Canister Vent Valve Solenoid, Red, 2-way with Leads (Part No.645-631)

Carquest Premium – A/C White Orifice Tube (Part No.T38623)

Carquest Premium – A/C Severe Temp Automatic Adjusting Orifice Tube (Part No.T38904)

Factory Air – Compressor Mounted High Cut-Out Pressure Switch (Part No.35974)

Factory Air – Standard Relay (Part No.36008)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26775)

Carquest Premium – 2 Pole Radiator or Condenser Fan Motor (Part No.35380)

Carquest Premium – A/C Standard Temp Automatic Adjusting Orifice Tube (Part No.T38902)

Factory Air – Compressor Mounted Low Cut-Out Pressure Switch (Part No.35973)

Carquest Premium – A/C Premium OEM Improved, New, with Clutch, with HD6 Compressor (Part No.T58956)

Dorman – Help – Air Conditioning Bypass Pulley (Part No.34209)

Driveworks – Ball Bearing (Part No.S-907257)

Dorman – Body Bolt – M6-1.0 X 25mm (Part No.963-232D)

Driveworks – Electrical Relay (Part No.83265)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1234)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1236)

GM Genuine Parts – Multi-Purpose Relay (Part No.15-81106)

GM Genuine Parts – Gray Multi-Purpose Pigtail (Part No.PT3923)