1997 BMW 328ic Cooling and Climate Controls

Essential Cooling and Climate Controls for 1997 BMW 328ics

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T56802)

A/C Discharge Line Hose Assembly

from

$37.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Carquest Premium – A/C Condenser (Part No.6574)

A/C Condenser

from

$174.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
See More

Behr – Radiator (Part No.G100067185BEH)

Radiator

from

$297.63
Aluminum Core Radiator The Behr replacement radiator guarantees the same quality fit and performance as the OE radiator it replaces. The Behr radiator core is manufactured using high quality anti corrosive aluminum and fiber glass-reinforced polyamide coolant tanks that are highly resistant to cracking and deformation.

Product Features:
  • OE-Equivalent
  • Direct fit for easy installation.
  • High quality corrosion resistant materials.
  • OE Style mounting brackets and hose connections.
  • Mechanically bonded aluminum core.
  • Integrated transmission oil cooler when applicable.
See More

Behr – Expansion Tank Cap (Part No.G1040458946BEH)

Expansion Tank Cap

from

$26.46
The Behr Expansion Tank Cap is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Flex A Lite – Black Magic Electric Fan (Part No.160)

Black Magic Electric Fan

from

$347.99
Black Magic Electric Fan

Calorstat – Thermostat (Part No.G400091331CAL)

Thermostat

from

$120.66
CALORSTAT thermostatic components (bellows thermostats for water temperature regulation), followed by the use of a different technology based on the wax expansion. CALORSTAT by Vernet has produced thermostatic elements for more than 50 years. A vast amount of experience and continuous development has enabled the Company to remain the world leader in this field. Throughout the world, Vernet is regarded as a valued partner by manufacturers, large and small, in the Sanitary, Heating and Automotive industry.

Product Features:
  • Comfort enhancement by a faster cabine warming
  • CO2 emissions and fuel consumption reduction
  • Thermostat opening driven by the ECU (electrical thermostat)
  • An adaptation of the control strategies to the vehicle use (electrical thermostat)
See More

Behr – BEHR Heater Core (Part No.R3000118946BEH)

BEHR Heater Core

from

$208.61
Behr manufactures a direct fit Heater Core that guarantees OEM quality, fit and performance.

Product Features:
  • OEM Quality Direct fit Application
  • Meets or exceeds OEM specifications.
  • Utilizes the factory style mounts, connectors and fittings.
  • Provides exceptional reliability.
See More

Behr – Air Conditioning Evaporator, With Valve (Part No.R1130300225BEH)

Air Conditioning Evaporator, With Valve

from

$415.89
Air Conditioning Evaporator, With Valve

Carquest Premium – Universal Fan Clutch – 5" Thermal Import/Compact (Part No.215014)

Universal Fan Clutch - 5" Thermal Import/Compact

from

$121.99
Product Features:
  • Designed, tested, and built by application
  • OE performance, fit, and appearance
  • Precision machined
  • Out of box installation
See More

APA/URO Parts – Thermostat Housing (Part No.G401062812APA)

Thermostat Housing

from

$40.10
The APA/URO Thermostat Housing is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Behr – Behr Blower Motor Resistor (Part No.R203261965BEH)

Behr Blower Motor Resistor

from

$67.16
The Behr Blower Motor Resistor is manufactured to meet or exceed the OE specifications for performance, fit and function.

Product Features:
  • Excellent electrical and thermal performance
  • Direct OE replacement
  • Built to strict quality control standards
  • 100% tested
See More

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

Engine Cooling Fan Module

from

$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

ACM – Air Conditioning Schrader Valve Cap (Part No.R1138333659ACM)

Air Conditioning Schrader Valve Cap

from

$14.61
ACM is a supplier of Original Equipment quality climate control products. Only for R134A suction pipes.
See More

Delphi – Engine Coolant Temperature Sensor (Part No.TS10258)

Engine Coolant Temperature Sensor

from

$35.49
Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:
  • Delphi temperature sensors deliver accurate readings and optimal performance
  • Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
  • Each sensor is electrically insulated to eliminate interference from other components in the vehicle
  • Delphi temperature sensors are impervious to electrical noise and interference
See More

Febi – Heater Valve (Part No.R3020177024FEB)

Heater Valve

from

$189.41
Heater Valve

Dorman – Clutch Fan Blade: Plastic, Cost Effective And Reliable (Part No.621-584)

Clutch Fan Blade: Plastic, Cost Effective And Reliable

from

$75.99
Replace your damaged cooling fan blade with this direct replacement. This vehicle-specific application is engineered for a perfect fit and is made from quality materials to ensure durability and restore proper cooling system operation.

Product Features:
  • Direct replacement – this engine cooling fan blade fits and functions like the original equipment fan blade.
  • Quality construction – manufactured from premium materials for a long service life.
  • Excellent value – original equipment quality at a lower price
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

Motorad – Thermostat Kit: Includes Housing, Thermostat and Seal, 192 Degrees (Part No.5541KT)

Thermostat Kit: Includes Housing, Thermostat and Seal, 192 Degrees

from

$53.99
Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

APA/URO Parts – Radiator Mount (Part No.G102075950APA)

Radiator Mount

from

$2.93
Radiator Mount

KAI – A/C System Seal Kit (Part No.FTT010073)

A/C System Seal Kit

from

$18.99
New Standard Replacement A/C System Seal Kit, MT2640, L4 Engine

Product Features:
  • MT2640, L4 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

MTC – Radiator Mount Bracket (Part No.G1021305122MTC)

Radiator Mount Bracket

from

$10.53
MTC develops and manufactures high quality OE specified polyurethane mounts, bushings and undercar components to the spare parts industry.
See More

KAI – A/C Compressor, L6 Engine (Part No.ACP011470)

A/C Compressor, L6 Engine

from

$435.99
New Standard Replacement A/C Compressor, L6 Engine

Product Features:
  • L6 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Programa – HVAC Control Module (Part No.R2059178465PRO)

HVAC Control Module

from

$413.25
Remanufactured Programa specializes in BMW, Mercedes Benz, Volvo, Porsche and Saab remanufactured ignition control units. Remanufacturing Process:

Product Features:
  • Complete visual inspection.
  • Boards and components are repaired or replaced.
  • Any test that fails to meet OEM specifications is repaired or replaced.
  • Once the ICU meets all OEM specifications, the unit is reassembled, sealed and packaged.
See More

Victor Reinz – Engine Coolant Thermostat Gasket (Part No.71-33071-00)

Engine Coolant Thermostat Gasket

from

$12.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26784)

Cap & Valve A/C System Seal Kit

from

$54.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

Carquest Premium – New Compressor with Clutch (Part No.T58356)

New Compressor with Clutch

from

$243.99
CARQUEST New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. CARQUEST New Compressors are designed to pump the air conditioning refrigerant through the air conditioning system to provide exceptional climate control for the passenger compartment.

Product Features:
  • New, with Clutch, with 10PA17C Compressor
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

Behr – Behr Blower Motor (Part No.R2031406631BEH)

Behr Blower Motor

from

$327.81
Behr manufactures an OEM quality replacement Blower Motor that guarantees the same performance, fitment and durability as that of the original unit it replaces. Behr’s advanced blower design provides boosted airflow performance, are highly efficient, and quiet-running, which provides excellent acoustic comfort from the climate control system.

Product Features:
  • OEM Quality.
  • Direct Fit Replacement.
  • Highly efficient
  • Quiet-running
  • Meets or exceeds OE design and performance.
See More

Behr – Behr Blower Motor (Part No.R2031406634BEH)

Behr Blower Motor

from

$261.04
Behr manufactures an OEM quality replacement Blower Motor that guarantees the same performance, fitment and durability as that of the original unit it replaces. Behr’s advanced blower design provides boosted airflow performance, are highly efficient, and quiet-running, which provides excellent acoustic comfort from the climate control system.

Product Features:
  • OEM Quality.
  • Direct Fit Replacement.
  • Highly efficient
  • Quiet-running
  • Meets or exceeds OE design and performance.
See More

Upgrade your 1997 BMW 328ic with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 1997 BMW 328ic, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Cooling and Climate Controls are key to keeping your 328ic functioning at its best. At Advance Auto Parts, we offer a wide selection of 119 Cooling and Climate Controls for the 1997 BMW 328ic, designed to meet your needs without breaking the bank. From Engine Cooling Part replacements to HVAC Electrical Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 1997 BMW 328ic at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $1.31 to $566.21, with an average price of $85.90. Our 119 Cooling and Climate Controls in stock come from 37 trusted brands, so you’re sure to find the right part for your 1997 BMW 328ic without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1997 BMW 328ic, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, Imperial, Carquest Premium, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. Imperial and Carquest Premium also bring quality to the table, with Cooling and Climate Controls available starting at $22.99, and at an average 4 stars rating. With 479 customer reviews and counting, our 1997 BMW 328ic Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1997 BMW 328ic is always ready to roll. We’re committed to providing you with everything you need to keep your 328ic in top shape, all in one place. Start shopping confidently below for your 1997 BMW 328ic!

Best-Selling Engine Cooling Parts for 1997 BMW 328ics

Enhance the driving experience in your BMW with 83 quality Engine Cooling Part components, starting at $1.61.

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Adjustable Thermostatic Fan Control

from

$22.99
Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:
  • Economy adjustable thermostatic fan control
  • Economy Model; 32-248°F
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Carquest Premium – Standard Thermostat: 192 Degrees (Part No.14622)

Standard Thermostat: 192 Degrees

from

$35.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

MAHLE Original – Engine Coolant Thermostat Housing Gasket (Part No.C31633)

Engine Coolant Thermostat Housing Gasket

from

$2.49
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Vemo – Coolant Level Sensor (Part No.G105057972VMO)

Coolant Level Sensor

from

$34.85
Choosing from the comprehensive VIEROL product range means opting for outstanding quality. This is confirmed by the Q+ quality seal for parts in OEM quality MADE IN GERMANY. VIEROL AG is a leading automotive parts distributor located in Oldenburg, Germany. With the trademarks VAICO and VEMO are the service market leaders in more than 125 countries worldwide. As an internationally present automotive supplier, VIEROL AG specializes in electronic and electrical components for German and European vehicles. VIEROL AG quality brands VEMO and VAICO combine innovation and experience, technical expertise and practiced corporate values, commitment to precision and a passion for technology: the invisible, but unquestionable, optimal prerequisites for guaranteed product quality and globally recognized service. Choosing from the comprehensive VIEROL product range means opting for outstanding quality.
See More

Calorstat – Thermostat (Part No.G400090446CAL)

Thermostat

from

$28.99
CALORSTAT thermostatic components (bellows thermostats for water temperature regulation), followed by the use of a different technology based on the wax expansion. CALORSTAT by Vernet has produced thermostatic elements for more than 50 years. A vast amount of experience and continuous development has enabled the Company to remain the world leader in this field. Throughout the world, Vernet is regarded as a valued partner by manufacturers, large and small, in the Sanitary, Heating and Automotive industry.

Product Features:
  • Comfort enhancement by a faster cabine warming
  • CO2 emissions and fuel consumption reduction
  • Thermostat opening driven by the ECU (electrical thermostat)
  • An adaptation of the control strategies to the vehicle use (electrical thermostat)
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1169)

Engine Water Pump: New, Gasket/Seals Included

from

$78.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
  • This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

Carquest Premium – Radiator Cap: 30 PSI (Part No.10247)

Radiator Cap: 30 PSI

from

$23.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Adjustable Thermostatic Fan Control

from

$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160-210°F push-in probe
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Imperial – Electric Fan – 10" Diameter (Part No.226110)

Electric Fan - 10" Diameter

from

$67.99
Electric fan with 10″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:
  • Rapid-Cool® Thin-Line electric fans
  • 10″ Diameter
  • 650 CFM
  • Use as a pusher or puller fan
See More

Dorman – Coolant Air Bleeder Screw (Part No.902-404)

Coolant Air Bleeder Screw

from

$4.99
This engine coolant bleeder screw has been manufactured from durable material to prevent cooling system leaks. Matches the original screw for fit and function.

Product Features:
  • Ideal replacement – this engine coolant bleeder screw matches fit and function of the original equipment screw.
  • Durable materials – designed to withstand high cooling system temperatures and pressures.
  • Cost-effective solution – this bleeder screw offers original equipment quality at a competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

Imperial – Electric Fan – 14" Diameter (Part No.226114)

Electric Fan - 14" Diameter

from

$99.99
Product Features:
  • Motors built and tested to quality specifications
  • 14 in. universal fit reversible fan
  • 1250 CFM
  • UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
See More

Carquest Premium – Standard Duty Fan Clutch – Thermal 6" Import/Compact (Part No.215024)

Standard Duty Fan Clutch - Thermal 6" Import/Compact

from

$175.99
Product Features:
  • Designed, tested, and built by application
  • OE performance, fit, and appearance
  • Precision machined
  • Out of box installation
See More

Carquest Premium – Radiator (Part No.432488)

Radiator

from

$143.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
See More

Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35761)

Engine Coolant Thermostat Housing Gasket

from

$11.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Thermostatic Fan Control - Preset

from

$38.49
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Preset thermostatic fan control
  • 185°F preset
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Thermostatic Fan Control - Adjustable

from

$62.99
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160°F – 210°F thread-in probe
  • For use with Imperial electric fans
  • Thread-in probe for installation in water jacket or radiator
See More

Dorman – Pressurized Coolant Reservoir: Black And Yellow, Plastic, Original Equipment Replacement (Part No.603-281)

Pressurized Coolant Reservoir: Black And Yellow, Plastic, Original Equipment Replacement

from

$103.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:
  • Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
  • Ideal solution – engineered for a seamless installation.
  • Durable construction – manufactured from quality materials to withstand underhood heat and vibration
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

Beck/Arnley – Thermostat (Part No.143-0731)

Thermostat

from

$34.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Features a standard jiggle valve where required by OE and has a long stroke for maximum cooling
  • Constructed with premium materials for durability
  • Be sure to use the proper coolant to maximize cooling system components. See Beck/Arnley catalog for the coolant for this application.
  • Application specific for this vehicle
See More

Dorman – Brass Coolant Air Bleeder Screw (Part No.902-404HP)

Brass Coolant Air Bleeder Screw

from

$8.79
This engine coolant bleeder screw has been manufactured from durable material to prevent cooling system leaks. Matches the original screw for fit and function.

Product Features:
  • Upgraded material – this brass coolant air bleeder screw reduces future maintenance costs by replacing the original equipment plastic screw on specified BMW, Mini, Chrysler, Dodge, Jeep, and Ram vehicles.
  • Ideal solution – instead of wasting time wrestling with a deformed plastic screw head, this sturdy brass screw ensures easy, reliable removal and reuse.
  • Durable construction – made of quality brass for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Motorad – Standard Thermostat: 180 Degrees (Part No.274-180)

Standard Thermostat: 180 Degrees

from

$20.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Universal Fan Clutch – 5" Thermal Import/Compact (Part No.215014)

Universal Fan Clutch - 5" Thermal Import/Compact

from

$121.99
Product Features:
  • Designed, tested, and built by application
  • OE performance, fit, and appearance
  • Precision machined
  • Out of box installation
See More

Dorman – Clutch Fan Blade: Plastic, Cost Effective And Reliable (Part No.621-584)

Clutch Fan Blade: Plastic, Cost Effective And Reliable

from

$75.99
Replace your damaged cooling fan blade with this direct replacement. This vehicle-specific application is engineered for a perfect fit and is made from quality materials to ensure durability and restore proper cooling system operation.

Product Features:
  • Direct replacement – this engine cooling fan blade fits and functions like the original equipment fan blade.
  • Quality construction – manufactured from premium materials for a long service life.
  • Excellent value – original equipment quality at a lower price
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

APA/URO Parts – Engine Cooling Fan Blade (Part No.G505028207APA)

Engine Cooling Fan Blade

from

$68.74
The APA/URO Engine Cooling Fan Blade is designed for specific vehicle fit, form, and function providing quiet dependable operation and longer service life.

Product Features:
  • Manufactured and tested to OEM specifications
  • Precision assembled and balanced with all NEW components for vibration free operation
  • OE Design and Technology insures ease of installation right out of the box
  • Manufactured in ISO and TS Certified facilities
See More

KAI – Coolant Reservoir (Part No.BM3014103)

Coolant Reservoir

from

$57.99
New Platinum Pro Coolant Recovery Tank

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1142)

Coolant Temperature Sensor

from

$29.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Felpro – O-RING (Part No.35763)

O-RING

from

$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Graf – Graf Water Pump (Part No.G3000457932GRA)

Graf Water Pump

from

$65.77
The Graf Water Pump contains no remanufactured parts and is produced using an optimized all metal impeller design to assist in cooling under high RPM, and performance demands. Selection of raw materials, reliability of machinery and production processes, stringent controls throughout the production process, from melting to fitting, as well as reliability tests performed using equipment able to determine true performance, go to ensure this product is a real guarantee of safety and long life. The Graf water pump is centrifugal in type and comprises a bladed rotor linked by means of a shaft (which rotates on bearings housed in a support) to the drive gear; the seal between the pump and the motor block is guaranteed by a gasket, while the inside of the pump is guaranteed by a mechanical seal. Component parts: Impeller: supplies the fluid with the necessary energy to cover the entire cooling circuit. Mechanical seal: ensures fluid seal inside the pump. Bearing: transmits movement to the impeller and supports any ventilation parts. Entrainment part: for transmitting movement to the bearing. Pump body: supports the basic pump component parts and conveys the coolant in the motor block.

Product Features:
  • All the component parts fitted are pre-tested to evaluate durability, performance and reliability.
  • The bearings undergo a durability test equivalent to nominal lifespan and are then inspected to assess integrity.
  • The mechanical seals are tested in extreme coolant temperature conditions according to predefined cycles.
  • The shape of the impellers is optimized thanks to the use of prototypes on which flow and performance tests are performed.
  • On both the entrainment parts and the bodies, the choice of materials and/or technologies different to original ones is made on the basis of structural and mechanical tests.
  • After assembly all the pumps undergo seal tests on units that reject those with leaks above set limits.
See More

Rein – Water Pump Pulley (Part No.G30201334748RIN)

Water Pump Pulley

from

$76.88
Water Pump Pulley

Felpro – Multi-Purpose O-Ring (Part No.25589)

Multi-Purpose O-Ring

from

$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Mahle – Thermostat (Part No.G4000106568MAH)

Thermostat

from

$33.34
Intelligent control systems from MAHLE are used in millions of applications worldwide to provide needs-based precision temperature control. Simple, effective, and tried and tested millions of times over: thermostat inserts from MAHLE provide meticulous regulation of coolant circuits around the world up to approximately 20 m3/h, and ensure ideal operating temperatures in light vehicles, trucks, stationary engines, and also agricultural and construction machinery. Wax elements are at the heart of all MAHLE thermostats and thermostat inserts. These maintenance-free, durable elements have proved their worth in millions of applications. MAHLE, Manufactures a wide range of variants with actuating forces of between 30 N and 2,500 N, small or large displacements, and for a large number of regulation ranges within a temperature span of -20C to +130C.

Product Features:
  • OE quality and design
  • Maintenance-free, durable elements
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1881)

Multi Purpose Relay

from

$72.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Rein – Expansion Tank (Part No.EPT0026)

Expansion Tank

from

$39.99
Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:
  • Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
  • Resistant to cracking and wear from heat cycles preventing coolant loss
  • Direct fitment allows easy installation
  • Manufactured to strict engineering standards/specifications in materials and tolerances
See More

Geba – Geba Water Pump (Part No.G3000457932GEB)

Geba Water Pump

from

$87.50
The GEBA Water Pump contains no remanufactured components and is manufactured to ensure high efficiency and optimal cooling under all conditions. Geba maintenance free Bearings with ball and roller spindle bearings are designed for the highest axial and radial stresses. Up to Date unitized sealing technology ensure optimal leak tightness and longevity. All housings are examined before the assembly. This procedure guarantees high reliability and life span of GEBA water pumps.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • High quality cast aluminum.
  • Advanced bearing design for high axial and radial stresses.
  • Unitized sealing technology that ensures optimal leak tightness and longevity.
  • Optimum cooling performance and longevity.
See More

FAE – Twin Connection Swit (Part No.C607075284FAE)

Twin Connection Swit

from

$28.97
Twin Connection Swit

Behr – Radiator (Part No.G10001461647BEH)

Radiator

from

$357.21
Aluminum Core Radiator The Behr replacement radiator guarantees the same quality fit and performance as the OE radiator it replaces. The Behr radiator core is manufactured using high quality anti corrosive aluminum and fiber glass-reinforced polyamide coolant tanks that are highly resistant to cracking and deformation.

Product Features:
  • OE-Equivalent
  • Direct fit for easy installation.
  • High quality corrosion resistant materials.
  • OE Style mounting brackets and hose connections.
  • Mechanically bonded aluminum core.
  • Integrated transmission oil cooler when applicable.
See More

Flex A Lite – Black Magic Electric Fan (Part No.160)

Black Magic Electric Fan

from

$347.99
Black Magic Electric Fan

Vemo – Fan Clutch (Part No.G501085046VMO)

Fan Clutch

from

$190.35
Fan Clutch

US MOTOR WORKS – Water Pump with Fan Clutch (Part No.MCK1094)

Water Pump with Fan Clutch

from

$151.99
US Motor Works Professional Series Water Pump with Fan Clutch are designed to replace the mechanical components of a cooling system. A proper water pump replacement should include a new fan clutch as the two are connected to the same shaft and work together to move the air and cooling fluid. Replacing one without the other can damage the new part and cause repeat work or engine trouble. This matched set will allow your vehicle continued operation in the demanding environment of today’s engine. All components are brand new and QA inspected for perfect fit and function. Restore your cooling power by installing a US Motor Works Professional Series Water Pump with Fan Clutch.

Product Features:
  • Fan clutch mounts to the water pump and should be replaced at the same time.
  • Matched set for proper water pump or fan clutch replacement
  • Includes mounting hardware, gaskets and accessories as required.
  • Complete mechanical cooling parts replacement
  • Factory tested and 100% new product
  • Meets or exceeds OEM quality
See More

Carquest Premium – Engine Coolant Level Sensor (Part No.FFA1194)

Engine Coolant Level Sensor

from

$134.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Engine Cooling Fan Switch (Part No.TFA1089)

Engine Cooling Fan Switch

from

$127.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.116)

Trimline Straight Blade Electric Fan

from

$119.99
Trimline Straight Blade Electric Fan

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

Engine Cooling Fan Module

from

$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Behr – Expansion Tank (Part No.G103075987BEH)

Expansion Tank

from

$88.84
The Behr expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.

Product Features:
  • OE-Equivalent and Direct Fit for easy Installation.
  • OE style connections and fittings.
  • Made of highly durable materials.
  • Resistant to thermal wear and cracking.
See More

Autopart International Inc – Expansion Tank (Part No.G10301951535API)

Expansion Tank

from

$77.86
Expansion Tank

Metrix – Expansion Tank (Part No.G103075987MTX)

Expansion Tank

from

$75.67
The Metrix expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.

Product Features:
  • OE-Equivalent and Direct Fit for easy Installation.
  • OE style connections and fittings.
  • Made of highly durable materials.
  • Resistant to thermal wear and cracking.
See More

Hella – Auxiliary Fan Switch (Part No.G503066663HEL)

Auxiliary Fan Switch

from

$63.83
Auxiliary Fan Switch

Most Popular 1997 BMW 328ic HVAC Electrical Parts

Customize your BMW with 2 HVAC Electrical Parts products like Climate Control Modules, all priced under $522.61.

Programa – HVAC Control Module (Part No.R2059178467PRO)

HVAC Control Module

from

$522.61
Remanufactured Programa specializes in BMW, Mercedes Benz, Volvo, Porsche and Saab remanufactured ignition control units. Remanufacturing Process:

Product Features:
  • Complete visual inspection.
  • Boards and components are repaired or replaced.
  • Any test that fails to meet OEM specifications is repaired or replaced.
  • Once the ICU meets all OEM specifications, the unit is reassembled, sealed and packaged.
See More

Programa – HVAC Control Module (Part No.R2059178465PRO)

HVAC Control Module

from

$413.25
Remanufactured Programa specializes in BMW, Mercedes Benz, Volvo, Porsche and Saab remanufactured ignition control units. Remanufacturing Process:

Product Features:
  • Complete visual inspection.
  • Boards and components are repaired or replaced.
  • Any test that fails to meet OEM specifications is repaired or replaced.
  • Once the ICU meets all OEM specifications, the unit is reassembled, sealed and packaged.
See More

Top Picks for 1997 BMW 328ic Blower Motor and Related Products

Upgrade BMW 328ics with top-quality Blower Motor and Related Products parts, including 3 OEM and aftermarket selections for your 1997 model.

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1285)

HVAC Blower Motor Resistor

from

$504.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Dorman – Blower Motor Resistor (Part No.973-111)

Blower Motor Resistor

from

$75.99
Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.

Product Features:
  • Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
  • Restores performance – fixes a fan that’s only operating on one speed or not working at all
  • Thoroughly tested – examined and validated to perform safely and effectively
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Behr – Behr Blower Motor Resistor (Part No.R203261965BEH)

Behr Blower Motor Resistor

from

$67.16
The Behr Blower Motor Resistor is manufactured to meet or exceed the OE specifications for performance, fit and function.

Product Features:
  • Excellent electrical and thermal performance
  • Direct OE replacement
  • Built to strict quality control standards
  • 100% tested
See More

In-Demand Heating Parts for 1997 BMW 328ics

Select from 5 premium Heating Parts parts for your 1997 BMW 328ic, with prices ranging from $2.08 to $342.75.

ACM – Heater Core O-Ring (Part No.R30011351696ACM)

Heater Core O-Ring

from

$2.08
Heater Core O-Ring

APA/URO Parts – Heater Valve (Part No.R302084995APA)

Heater Valve

from

$342.75
Heater Valve

Behr – Behr Blower Motor (Part No.R2031406631BEH)

Behr Blower Motor

from

$327.81
Behr manufactures an OEM quality replacement Blower Motor that guarantees the same performance, fitment and durability as that of the original unit it replaces. Behr’s advanced blower design provides boosted airflow performance, are highly efficient, and quiet-running, which provides excellent acoustic comfort from the climate control system.

Product Features:
  • OEM Quality.
  • Direct Fit Replacement.
  • Highly efficient
  • Quiet-running
  • Meets or exceeds OE design and performance.
See More

ACM – ACM Heater Core (Part No.R300041537ACM)

ACM Heater Core

from

$130.41
ACM manufactures a direct fit Heater Core that guarantees OEM quality, fit and performance.

Product Features:
  • OEM Quality Direct fit Application
  • Meets or exceeds OEM specifications.
  • Utilizes the factory style mounts, connectors and fittings.
  • Provides exceptional reliability.
See More

Carquest Premium – Heater Core (Part No.910631)

Heater Core

from

$98.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:
  • All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
  • Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
  • Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
  • Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
  • Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
See More

Most Sold 1997 BMW 328ic Air Conditioning Parts

Explore our best-selling BMW parts for the 1997 328ic among 26 OEM and aftermarket options starting from $1.31.

Carquest Standard – Reman Nippondenso 10PA17C Compressor w/ Clutch (Part No.DW57356)

Reman Nippondenso 10PA17C Compressor w/ Clutch

from

$224.99
Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:
  • Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
  • All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
  • All units have new seals, O-rings, gaskets and clutch bearings
  • Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1749)

Multi Purpose Relay

from

$36.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26784)

Cap & Valve A/C System Seal Kit

from

$54.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

Carquest Premium – A/C Compressor Relay Connector (Part No.PTA1465)

A/C Compressor Relay Connector

from

$44.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2489)

ABS Wheel Speed Sensor

from

$108.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better than OE provide durability and long service life
  • All ABS sensors are tested for proper fit, form, and function
  • Wire diameter and sheathing same or larger than OE to ensure product quality
  • Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
  • Includes all necessary brackets and hardware
See More

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2463)

ABS Wheel Speed Sensor

from

$49.49
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better than OE provide durability and long service life
  • All ABS sensors are tested for proper fit, form, and function
  • Wire diameter and sheathing same or larger than OE to ensure product quality
  • Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
  • Includes all necessary brackets and hardware
See More

Aftermarket – A/C Compressor (Part No.R100081942AFT)

A/C Compressor

from

$566.21
The Aftermarket new A/C Compressor with clutch assembly is the same quality fit and performance of the OE compressor it replaces.

Product Features:
  • Brand new with no remanufactured parts
  • OE-Equivalent and Direct fit Application
  • Equipped with a new clutch assembly
  • Includes installation instructions and all necessary fitment components
See More

Vaico – A/C Hose (Part No.R1020299847VCO)

A/C Hose

from

$275.22
Choosing from the comprehensive VIEROL product range means opting for outstanding quality. This is confirmed by the Q+ quality seal for parts in OEM quality MADE IN GERMANY. VIEROL AG is a leading automotive parts distributor located in Oldenburg, Germany. With the trademarks VAICO and VEMO are the service market leaders in more than 125 countries worldwide. As an internationally present automotive supplier, VIEROL AG specializes in electronic and electrical components for German and European vehicles. VIEROL AG quality brands VEMO and VAICO combine innovation and experience, technical expertise and practiced corporate values, commitment to precision and a passion for technology: the invisible, but unquestionable, optimal prerequisites for guaranteed product quality and globally recognized service. Choosing from the comprehensive VIEROL product range means opting for outstanding quality.
See More

Carquest Premium – New Compressor with Clutch (Part No.T58356)

New Compressor with Clutch

from

$243.99
CARQUEST New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. CARQUEST New Compressors are designed to pump the air conditioning refrigerant through the air conditioning system to provide exceptional climate control for the passenger compartment.

Product Features:
  • New, with Clutch, with 10PA17C Compressor
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

Rein – A/C Evaporator (Part No.R113097216RIN)

A/C Evaporator

from

$243.39
A/C Evaporator

Rein – A/C Evaporator (Part No.ACE0062R)

A/C Evaporator

from

$239.99
Rein OE Quality Air Conditioning Evaporator. Pressure tested before leaving the factory. Designed according to OE specifications, ensuring fit and function are identical to the original evaporator.
See More

Nissens – Nissens A/C Condenser (Part No.R103052912NSS)

Nissens A/C Condenser

from

$225.58
Nissens manufactures an A/C Condenser that is the same quality fit and performance of the OE Condenser it replaces.

Product Features:
  • OEM Quality Direct fit Application
  • Utilizes fixed feeder tubes with no fault tolerance in length, diameter and bending angle, providing protection against leaks and loss of efficiency.
See More

Carquest Premium – A/C Condenser (Part No.6591)

A/C Condenser

from

$216.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
See More

Delphi – ABS Wheel Speed Sensor (Part No.SS20005)

ABS Wheel Speed Sensor

from

$124.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:
  • Delphi sensors are built to meet or exceed OE requirements and testing
  • Delphi has improved the OE design by plating the connectors to help prevent corrosion and failure commonly caused by internal and cable short circuits
  • Delphi’s OE design helps by preventing mechanical damage to the sensor wheel, soiling and increased wheel bearing free play
  • Speed sensors maintain optimal performance during drastic temperature changes for robust, long-lasting sensor protection
  • Designed digital output for maximum signal to noise ratio
See More

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T55375)

A/C Discharge Line Hose Assembly

from

$117.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

ACM – A/C Pressure Switch (Part No.R105481960ACM)

A/C Pressure Switch

from

$94.92
ACM is a supplier of Original Equipment quality climate control products.
See More

Autopart International Inc – ABS Speed Sensor (Part No.N60302052213API)

ABS Speed Sensor

from

$76.62
ABS Speed Sensor

Carquest Premium – HVAC Pressure Switch (Part No.ACA1677)

HVAC Pressure Switch

from

$69.99
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
  • All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.
See More

ACM – ACM A/C Receiver Drier (Part No.R104063438ACM)

ACM A/C Receiver Drier

from

$54.66
The ACM A/C Receiver Drier is manufactured to exact OEM specifications for quality fit and performance.

Product Features:
  • OE-Equivalent and Direct fit Application.
  • Meets or exceeds the vehicle manufacturer specifications.
  • Utilizes factory style fittings and connectors.
  • Includes the required o-rings and associated hardware
See More

ACM – A/C Expansion Valve (Part No.R1045230190ACM)

A/C Expansion Valve

from

$47.75
The ACM A/C Expansion Valve that is manufactured to exact OEM specifications for quality fit and performance.

Product Features:
  • OE-Equivalent and Direct fit Application.
  • Meet or exceed OEM specifications.
  • Utilizes the factory style fittings and connectors
  • Compatible with R12 and R134a refrigerant. Installation Note: Receiver driers or accumulators, and expansion devices should be replaced any time an A/C system is opened. Individual A/C component warranties may be void if these items are not replaced.
See More

ACM – A/C Expansion Valve (Part No.R104539688ACM)

A/C Expansion Valve

from

$43.92
A/C Expansion Valve

Autopart International Inc – A/C Receiver Drier (Part No.R10403311378API)

A/C Receiver Drier

from

$43.02
A/C Receiver Drier

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T38630)

A/C Block Type Flange Expansion Valve

from

$35.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

KAI – A/C System Seal Kit (Part No.FTT010073)

A/C System Seal Kit

from

$18.99
New Standard Replacement A/C System Seal Kit, MT2640, L4 Engine

Product Features:
  • MT2640, L4 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

ACM – Air Conditioning Schrader Valve Cap (Part No.R1138333659ACM)

Air Conditioning Schrader Valve Cap

from

$14.61
ACM is a supplier of Original Equipment quality climate control products. Only for R134A suction pipes.
See More

Vaico – Fan Shroud Rivet (Part No.G502575975VCO)

Fan Shroud Rivet

from

$1.31
Fan Shroud Rivet

Top-Rated Cooling and Climate Controls Brands For Your 1997 BMW 328ic

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 1997 BMW 328ics. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Imperial, and Carquest Premium, and more. Cooling and Climate Controls from these brands that fit a 1997 328ic start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 1997 BMW 328ic Cooling and Climate Controls

When it comes to maintaining or upgrading your 1997 BMW 328ic, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 1997 BMW 328ic. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ
from
$38.99
This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

Popular Imperial 1997 BMW 328ic Cooling and Climate Controls

Imperial auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 1997 BMW 328ic owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 1997 328ic, Advance Auto Parts carries a full inventory of 6 Imperial Cooling and Climate Controls. Plus you will be keeping your BMW in peak condition while saving money because prices on these Imperial Cooling and Climate Controls range from $22.99 to $99.99, plus, with more than 106 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

Adjustable Thermostatic Fan Control
from
$22.99

(35)

Adjustable Thermostatic Fan Control

“Advance kicks butt”

Electric Fan - 10" Diameter
from
$67.99

(14)

Electric Fan – 10" Diameter

“So, the Air Conditioner Condenser fan motor failed on my 2003 Dodge Ram 1500. It turns out that the 2002 – 2005 Rams all use the same AC Condenser fa”

Adjustable Thermostatic Fan Control
from
$55.99

(33)

Adjustable Thermostatic Fan Control

“I used this fan control on my 2006 pt cruiser. It’s simple to install and works great. I’m going to get another one for my 1999 jeep Cherokee.”

FAQs for 1997 BMW 328ic Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 1997 BMW 328ics?

Out of 119 Cooling and Climate Controls that fit 1997 BMW 328ics, the following parts are the top sellers:

What’s the price range for 1997 BMW 328ic Cooling and Climate Controls?

Cooling and Climate Control prices for the 1997 BMW 328ic start at $1.31 and go up to $566.21 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 1997 BMW 328ic?

The average price for Cooling and Climate Controls for the 1997 BMW 328ic is $85.90. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other BMW 328ic model years?

Yes, we currently carry Cooling and Climate Controls for 3 model years of BMW 328ics between 1996 and 1999. Cooling and Climate Controls are bought most frequently for the following model years: 1999, 1998, and 1996.

What are the cheapest Cooling and Climate Controls for my 1997 BMW 328ic?

The cheapest 1997 BMW 328ic Cooling and Climate Controls we carry in stock are:

What are the top-rated Cooling and Climate Controls that fit the 1997 BMW 328ic?

Out of 479 reviews by customers, our 1997 BMW 328ic Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 1997 BMW 328ic and their top-rated products:

What types of Cooling and Climate Controls do you sell for my 1997 BMW 328ic?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 1997 BMW 328ic:

Can I get help with 1997 BMW 328ic Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Cooling and Climate Controls and more.

What is your return policy for BMW 328ic Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new BMW 328ic Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.