1996 Ford Thunderbird Differentials

Essential 1996 Ford Thunderbird Differentials

National – Bearings (Part No.02820)

Bearings

from

$12.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Timken – Differential Pinion (Part No.J7021374649TIM)

Differential Pinion

from

$12.34
Differential Pinion

USA Standard Gear – Master Overhaul Kit for the Ford 9" LM102910 Differential, with Solid Spacer (Part No.37034)

Master Overhaul Kit for the Ford 9" LM102910 Differential, with Solid Spacer

from

$213.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Ford 9″ with LM102910 carrier race
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pilot bearing, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve eliminator, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Pinion Install Kit For Ford Daytona 9" Differential (Part No.13049)

Pinion Install Kit For Ford Daytona 9" Differential

from

$225.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Ford 9″ with Daytona pinion support
  • Included are pinion bearings and races, pinion seal, crush sleeve eliminator , complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Trac Loc Friction Plate, 4 Tab (Part No.16177)

Trac Loc Friction Plate, 4 Tab

from

$21.99
Product Features:
  • Friction plate
  • Fits Ford 8″ and 9″ Trac Loc positraction
See More

Yukon Gear – Pilot Bearing Retainer For Ford 9" (Part No.33255)

Pilot Bearing Retainer For Ford 9"

from

$11.99
Pilot bearing retainer for Ford 9″.

Product Features:
  • Pilot bearing retainer for Ford 9″
See More

Energy Suspension – Differential Carrier Bushing Set (Part No.4.1126G)

Differential Carrier Bushing Set

from

$40.99
Product Features:
  • Made of Superior Hyper-Flex+ Material
See More

Driveworks – Oil Seal (Part No.S-3604)

Oil Seal

from

$4.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 9" In A 4.11 Ratio (Part No.24108)

High Performance Ring & Pinion Gear Set For Ford 9" In A 4.11 Ratio

from

$404.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits Ford 9″
  • 9.00″ ring gear diameter
  • 28 spline pinion
  • 10 ring gear bolts
  • 4.11 ratio
See More

Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)

One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout

from

$51.99
One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.

Product Features:
  • Carrier race
  • Fits Ford 9″
  • Conversion race to install small bearing carrier into 3.250″ dropout
See More

Yukon Gear – Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt (Part No.33043)

Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt

from

$5.99
Ford 8″ & 9″ standard Open, AG, & Detroit locker ring gear bolt, 1.0″ long, Ford.

Product Features:
  • Ring gear bolt for Ford 8″ and 9″
  • For use with standard open carrier, Auburn Gear limited slip and Detroit Locker
  • 1.0″ long
See More

Yukon Gear – 9" Ford Pinion Nut, 35 Spline Large Pinion Oversize (Part No.33161)

9" Ford Pinion Nut, 35 Spline Large Pinion Oversize

from

$26.99
9″ Ford pinion nut, 35 spline Large pinion oversize.

Product Features:
  • Pinion nut
  • Fits Ford 9″ with 35 spline pinion
See More

Dorman – Differential Clutch Kit (Part No.697-780)

Differential Clutch Kit

from

$262.99
This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles
  • Quality materials – all components are built for reliable longevity and performance
  • Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Yukon Gear – Side Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford (Part No.33300)

Side Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford

from

$11.99
Side gear thrust washer (0.875″ shaft) for 8.8″ Ford.

Product Features:
  • Side gear thrust washer for Ford 8.8″
  • 0.875″ diameter cross pin shaft applications only
See More

Yukon Gear – Cover Bolt For Ford 7.5", 8.8" & 9.75" (Part No.33554)

Cover Bolt For Ford 7.5", 8.8" & 9.75"

from

$6.99
Yukon 1541H alloy replacement rear axle for Dana 60, 70, and 80, 35 spline. (40″ to 43.5″) Full float axle (8×3.96″ ). Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a full-floating axle.

Product Features:
  • 35 spline
  • 8 x 3.96″ bolt pattern
  • Cut to length design fits 40″-43.5″ applications
  • Fits Dana Spicer 60, 70 and 80
See More

Richmond Gear – Differential Cross Shaft (Part No.CSPF88L)

Differential Cross Shaft

from

$26.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Pro-King – Differential Cross Shaft (Part No.742G930)

Differential Cross Shaft

from

$2.79
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.VV324)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$12.79
Product Features:
  • High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
  • Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
  • Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
  • Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Yukon Gear – Carrier Installation Kit For Ford 8.8" Differential (Part No.57007)

Carrier Installation Kit For Ford 8.8" Differential

from

$134.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 8.8″ differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits Ford 8.8″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Pro-King – Differential Pinion Shim Kit (Part No.763A203)

Differential Pinion Shim Kit

from

$11.79
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Pilot Bearing For Ford 9" (Part No.18042)

Pilot Bearing For Ford 9"

from

$38.99
8.6″ GM 99-08 PINION Bearing & SEAL KIT .

Product Features:
  • Pilot bearing
  • Fits Ford 9″
  • 0.656″ thick
See More

Pro-King – Differential Crush Sleeve (Part No.761A034)

Differential Crush Sleeve

from

$2.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Standard Open & Tracloc Pinion Gear And Thrust Washer For 7.5" Ford (Part No.33296)

Standard Open & Tracloc Pinion Gear And Thrust Washer For 7.5" Ford

from

$10.99
Standard Open & TracLoc pinion gear thrust washer for 7.5″ Ford.

Product Features:
  • Pinion gear thrust washer
  • Fits Ford 7.5″
See More

Yukon Gear – Chrome Cover For 8.8" Ford (Part No.32009)

Chrome Cover For 8.8" Ford

from

$74.99
Chrome cover for 8.8″ Ford.

Product Features:
  • Fits Ford 8.8″
  • Chrome
See More

Motive Gear – Differential Bearing Kit – Timken (Part No.R8.8RT)

Differential Bearing Kit - Timken

from

$109.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • KIT BRG & SEAL FORD 8.8″
See More

Yukon Gear – 1.250" Pinion Adaptor Sleeve (Stock Pinion Into Large Support) (Part No.32239)

1.250" Pinion Adaptor Sleeve (Stock Pinion Into Large Support)

from

$74.99
1.250″ pinion adaptor sleeve (stock pinion into large support).

Product Features:
  • Adapter sleeve
  • Fits Ford 9″
  • Adapts 28 spline pinion into 35 spline pinion support
See More

Yukon Gear – Trac Loc Case For Ford 9" (Part No.20079)

Trac Loc Case For Ford 9"

from

$339.99
9″ TracLoc case, bare, 28 & 31 spline, 2or4 PIN, 4 TAB clutches.

Product Features:
  • Trac Loc positraction carrier case
  • Does not include spider gears
  • Fits Ford 9″ with 28 or 31 spline axles
See More

Powertrax – Lock Right Locker (Part No.1821-LR)

Lock Right Locker

from

$441.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    1996 Ford Thunderbird Differentials

    Maybe you’re in the middle of a full rebuild of that 1996 Ford Thunderbird. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 162 different Differentials in our inventory ranging from $0.99 to $689.99. That means you can find the exact parts or products you need to keep that 1996 Ford Thunderbird running smoothly.

    Differentials are only as good as their brand. We stock 19 different brands to make sure you have plenty of trusted parts to choose from for your 1996 Ford Thunderbird. Valvoline, National, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1996 Ford Thunderbird, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,046 reviews in this category, some of the top rated parts include Bearings with 5.0 stars and Differential Master Bearing Kit – Timken with 4.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1996 Ford Thunderbird rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1996 Ford Thunderbird Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1996 Ford Thunderbird demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Thunderbird the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Powertrax Differentials

    We carry Powertrax parts in our stock across Differential Open Unit and Components categories, plus more. For a 1996 Ford Thunderbird, our most popular Powertrax Differentials include:
    Lock Right Locker
    from $444.99
    (1)
    Lock Right Locker
    Differential Open Unit and Components

    FAQs for 1996 Ford Thunderbird Differentials

    What are the most purchased Differentials for the 1996 Ford Thunderbird?

    Out of 162 Differentials for the 1996 Ford Thunderbird, the most popular in our inventory are:
    Multi Purpose Seal
    from $11.99
    (28)
    Multi Purpose Seal
    Differential Pinion Seals
    Differential Shaft Lock Bolt
    from $5.99
    (11)
    Differential Shaft Lock Bolt
    Differential Pinion Shaft Lock Bolts
    3 Qt - Penzoil 80W90 Conventional Gear Oil
    from $44.99
    This product is not rated
    3 Qt – Penzoil 80W90 Conventional Gear Oil
    Differential Oil

    What are the top-rated 1996 Ford Thunderbird Differentials?

    Top-rated Differentials for your 1996 Ford Thunderbird based on customer reviews/ratings are:
    Bearings
    from $15.99
    (9)
    Bearings
    “as advertised”
    Differential Master Bearing Kit - Timken
    from $137.99
    (8)
    Differential Master Bearing Kit – Timken
    “These Timken bearings work great in my 10 second drag car.”
    Bearings
    from $10.49
    (4)
    Bearings
    “Goes with M88010 bearing cup. Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”