1996 Ford Mustang Cooling and Climate Controls
More 1996 Ford Mustang Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 1996 Ford Mustang, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 1996 Ford Mustang Cooling and Climate Controls
Carquest Premium – Blower Motor: Without Wheel (Part No.35514)
from
$47.49
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T55703)
from
$37.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
- Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
- Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
- Welds and crimps meet and exceed original equipment tension specifications.
- Manufactured to allow flexibility in the hose to conform to engine compartments.
- O-Rings necessary for installation are included.
- O-Rings necessary for installation are included.
Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 90 Degree Neck Angle (Part No.902-1037)
from
$15.49
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
Carquest Premium – A/C New; w/ Clutch; w/ FS18 Compressor (Part No.T68198)
from
$401.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
- New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
- The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
- All new compressors must pass a helium leak test and pump up function test prior to packaging.
- O-Rings and gaskets necessary for installation are included.
- Matched high-quality needle-roller bearing ensures low friction and high load capability.
- Light weight aluminum energy-saving casting used for construction.
Factory Air – Harness Connector (Part No.37235)
from
$15.79
OE style connectors; Molded plastic construction; Quality contacts ensure proper conductivity; Universal applications
See More
Factory Air – Reman Nippondenso 10P, 6P Clutch Assembly w/ Coil (Part No.48853)
from
$141.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All mounting hardware included
- Pulley and hub are machined and trued to ensure an even surface
- Includes new bearing
- Coated to prevent corrosion
Dorman – Multi-Purpose Pigtail Connector (Part No.85137)
from
$12.99
Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.
Product Features:
See More
Product Features:
- Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
- Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
- Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
- Versatile component – this connector can be used in a variety of repairs and custom installations
Carquest Premium – A/C Suction Line Hose Assembly (Part No.T56568)
from
$68.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
- Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
- Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
- Welds and crimps meet and exceed original equipment tension specifications.
- Manufactured to allow flexibility in the hose to conform to engine compartments.
- O-Rings necessary for installation are included.
- O-Rings necessary for installation are included.
Factory Air – 14" Reversible Fan Kit (Part No.36897)
from
$164.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.
Product Features:
See More
Product Features:
- Motors built and tested to quality specifications
- 14″ universal fit reversible fan
- Includes mounting and relay kit
- 1350 CFM
Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1165)
from
$18.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.
Product Features:
See More
Product Features:
- Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
- Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
- Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
- Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
Carquest Premium – Fuel Pump Relay Connector (Part No.PTA1277)
from
$14.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Felpro – WATER PUMP GASKET SET (Part No.ES 73048)
from
$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Unsurpassed quality you can trust
Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)
from
$32.99
OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.
Product Features:
See More
Product Features:
- Designed specially for high-torque and high vibration applications
- Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
- OEM specified
- Low-odor, non-corrosive formula
- Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)
Motorad – Thermostat Kit: Includes Housing, Thermostat and Gasket, 195 Degrees (Part No.4818KT)
from
$16.99
Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
KAI – Rad/Condenser Fan Assembly (Part No.FO3115204)
from
$157.99
New Platinum Pro Radiator And Condenser Fan Assembly , 2.3 Liter Turbo
Product Features:
See More
Product Features:
- 2.3 Liter Turbo, Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Felpro – Engine Coolant Outlet Gasket (Part No.35004)
from
$2.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Factory Air – Liquid Line Orifice Tube Repair Kit w/o Orifice Tube (Part No.16150)
from
$38.49
All hoses are constructed with double wall barrier hose compatible with R134A or R12; Contains gaskets, o-rings, or seals to properly replace the product; Crimp fitting connection; Application specific design
See More
Felpro – Engine Water Pump Gasket (Part No.35352)
from
$2.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Motorcraft – A/C Service Valve (Part No.R1129680423MTR)
from
$11.07
A/C Service Valve
Motorcraft – A/C Compressor (Part No.R10001348966MTR)
from
$652.98
A/C Compressor
Motorcraft – A/C Relief Valve (Part No.R1028680239MTR)
from
$60.70
A/C Relief Valve
Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.85173)
from
$24.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.
Product Features:
See More
Product Features:
- Meets and/or exceeds OEM standard
- Includes quality gasket or O-ring to ensure proper seal (where applicable)
- Coated with corrosion and rust inhibitor
- 100% leak tested
- Direct-fit replacement for ease of installation
Factory Air – Green Round O-Ring (Part No.24650)
from
$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Dorman – Blower Motor Harness (Part No.645-551)
from
$19.99
This HVAC blower switch connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC blower switch connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Multi Purpose Relay (Part No.RAA1234)
from
$19.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Radiator Cap Tester Adapter (Part No.12021)
from
$17.79
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
Dorman – Radiator Fan Assembly: Dual, Cost Effective & Reliable (Part No.621-537)
from
$148.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.
Product Features:
See More
Product Features:
- Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
- Complete package – assembly is designed with the same materials and components as the original part
- Quality assured – motors are tested in laboratory settings to ensure performance
- Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
Motorcraft – Thermostat O-Ring (Part No.G4030195862MTR)
from
$3.89
Thermostat O-Ring
Popular 1996 Ford Mustang Cooling and Climate Controls Categories
1996 Ford Mustang Cooling and Climate Controls
You count on your 1996 Ford Mustang to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 185 Cooling and Climate Controls ranging in price from $0.99 to $374.56, you’re sure to find everything you need for your 1996 Ford Mustang.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 21 different brands like Permatex, Carquest Premium, and Felpro. 1996 Ford Mustang Cooling and Climate Controls start as low as $0.99!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 3,283 extensive product reviews on 1996 Ford Mustang Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Radiator Cap: 16 PSI with 4.7 stars and Engine Coolant Outlet Gasket with 4.7 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1996 Ford Mustang below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 1996 Ford Mustang
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1996 Ford Mustang running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Felpro, and even more.
Popular Motorad UltraStats Cooling and Climate Controls
You’ll find popular Motorad UltraStats brand products across Engine Cooling Parts. All are waiting to get your 1996 Ford Mustang back on the road. Some of the top-rated Motorad UltraStats products in these categories are:
Top-Rated Carquest Premium Cooling and Climate Controls
If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Cooling and Climate Controls for your 1996 Ford Mustang, and some of our most reviewed Carquest Premium parts include:
FAQs for 1996 Ford Mustang Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 1996 Ford Mustang?
Out of 185 Cooling and Climate Controls for the 1996 Ford Mustang, the most popular in our inventory are:
What are the top-rated 1996 Ford Mustang Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 1996 Ford Mustang based on customer reviews/ratings are:
