1996 Ford LTL9000 Car Parts & Accessories

Heavy Duty blade with five bar design can be used on both curved and flat windshields. 

Product Features:

• All metal blade frame for strength and durability
• Black finish resembles original blade
• Fits wide saddle wiper arms

Carquest Premium Fuel Spin-on Filters protect your engine and fuel system by removing dirt, rust, and other impurities from the fuel before it reaches your engine fuel system. These filters effectively remove contaminants to prevent clogging and damage to fuel injectors, pumps and other critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the fuel clean, these filters help ensure optimal combustion, improve engine efficiency, and reduce emissions. Carquest Premium Fuel Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA
• CAUTION: Furnished D-Ring must be installed on post for seal.

Carquest Premium Fuel/Water Separator Filters remove water and other impurities from the fuel before it reaches your engine fuel system. These filters effectively separate water from the fuel, preventing corrosion and damage to fuel injectors, pumps and other critical engine components. By keeping the fuel clean and water-free, these filters help ensure optimal combustion, improve engine efficiency, and reduce emissions. Carquest Premium Fuel/Water Separator Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• CAUTION: Furnished D-Ring must be installed on post for seal. Can be used with 99226 base.
• Contains Standpipe
• Patent pending drain, metal end caps, which hold media in place
• Rust resistant can, ensuring no leakage from inside
• Made in USA
• Includes Standpipe
• CAUTION: Furnished D-Ring must be installed on post for seal.

FRAM Extra Guard oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip technology, FRAM Extra Guard oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).

Product Features:

• Proven protection for up to 10,000 miles
• Engineered for use with synthetic or conventional motor oils
• SureGrip technology for easy install and removal
• Filter media is a blend of fiber and resin that captures 95% of the dirt particles

FRAM Racing filters are designed with a heavy-gauge tapping plate and an extra-thick steel can that is able to withstand the high pressure flexing caused by demanding driving conditions. A spiral-shaped center tube provides protection against collapse, and tough steel end caps add even more durability. A screen-over 22PSI filter bypass valve provides additional protection against larger contaminants.

Product Features:

• Proven protection for up to 10,000 miles
• Engineered for use with synthetic or conventional motor oils
• Filter media is a blend of fiber and resin that captures 95% of the dirt particles
• The perfect balance of dirt-trapping efficiency and dirt-holding capacity

Carquest Premium Fuel Spin-on Filters protect your engine and fuel system by removing dirt, rust, and other impurities from the fuel before it reaches your engine fuel system. These filters effectively remove contaminants to prevent clogging and damage to fuel injectors, pumps and other critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the fuel clean, these filters help ensure optimal combustion, improve engine efficiency, and reduce emissions. Carquest Premium Fuel Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA

Carquest Premium Fuel/Water Separator Filters remove water and other impurities from the fuel before it reaches your engine fuel system. These filters effectively separate water from the fuel, preventing corrosion and damage to fuel injectors, pumps and other critical engine components. By keeping the fuel clean and water-free, these filters help ensure optimal combustion, improve engine efficiency, and reduce emissions. Carquest Premium Fuel/Water Separator Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA

Carquest Premium Fuel Spin-on Filters protect your engine and fuel system by removing dirt, rust, and other impurities from the fuel before it reaches your engine fuel system. These filters effectively remove contaminants to prevent clogging and damage to fuel injectors, pumps and other critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the fuel clean, these filters help ensure optimal combustion, improve engine efficiency, and reduce emissions. Carquest Premium Fuel Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA

Carquest Premium Oil Spin-on Filters protect your engine by removing contaminants, such as dirt, metal particles, and sludge, from your engine oil. These filters effectively remove contaminants that can cause significant wear and damage to critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the oil clean, these filters help ensure proper lubrication and cooling, reduce friction and help extend engine life. Carquest Premium Oil Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA

Carquest Premium Oil Spin-on Filters protect your engine by removing contaminants, such as dirt, metal particles, and sludge, from your engine oil. These filters effectively remove contaminants that can cause significant wear and damage to critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the oil clean, these filters help ensure proper lubrication and cooling, reduce friction and help extend engine life. Carquest Premium Oil Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA

Carquest Premium Oil Spin-on Filters protect your engine by removing contaminants, such as dirt, metal particles, and sludge, from your engine oil. These filters effectively remove contaminants that can cause significant wear and damage to critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the oil clean, these filters help ensure proper lubrication and cooling, reduce friction and help extend engine life. Carquest Premium Oil Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Contains Anti-Drainback Valve;8 PSID By-Pass Valve; Front End By-Pass Valve

Carquest Premium Oil Spin-on Filters protect your engine by removing contaminants, such as dirt, metal particles, and sludge, from your engine oil. These filters effectively remove contaminants that can cause significant wear and damage to critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the oil clean, these filters help ensure proper lubrication and cooling, reduce friction and help extend engine life. Carquest Premium Oil Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA

Carquest Premium Primary Radial Seal Air Filters protect your equipment by preventing airborne contaminants, such as dust, dirt, and debris, from reaching your combustion chamber. Featuring a durable radial seal design, these filters use a urethane compound to mold the ends and bond the media pack with the inner and outer metal wrappers, creating a strong yet flexible package. Carquest Premium Primary Radial Seal Air Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Radial Seal primary filter with inboard seal
• Poly Urethane Sealing Ring surface ensures a 100% complete seal during normal engine/equipment vibrations and temperature extremes
• Made in USA
• Use with 88628

Carquest Premium Oil Spin-on Filters protect your engine by removing contaminants, such as dirt, metal particles, and sludge, from your engine oil. These filters effectively remove contaminants that can cause significant wear and damage to critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the oil clean, these filters help ensure proper lubrication and cooling, reduce friction and help extend engine life. Carquest Premium Oil Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Can be used with 89750 base.
• Made in USA
• Can be used with 89750 base.

Carquest Premium Primary Radial Seal Air Filters protect your equipment by preventing airborne contaminants, such as dust, dirt, and debris, from reaching your combustion chamber. Featuring a durable radial seal design, these filters use a urethane compound to mold the ends and bond the media pack with the inner and outer metal wrappers, creating a strong yet flexible package. Carquest Premium Primary Radial Seal Air Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.

Carquest Premium Air Filters ensure your equipment runs smoothly with our high-quality filtration media that prevents airborne contaminants, such as dust, dirt, and debris, from reaching your combustion chamber. Protecting critical engine components from wear and damage helps maintain optimal engine power, improve fuel efficiency, and extend engine life – keeping your equipment performing at its best. Carquest Premium Air Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Axial seal air filter with fins
• Air Element with Fins, to aid in removing heavy contaminant before entering media, adding longer service life
• Positive foam sealing design, metal end caps
• Additional glue added to prevent media migration in extreme environments
• Made in USA
• Use with 87887

Carquest Premium Fuel Cartridge Filters protect your engine and fuel system by removing dirt, rust, and other impurities from the fuel before it reaches your engine fuel system. These filters effectively remove contaminants to prevent clogging and damage to fuel injectors, pumps and other critical engine components. The cartridge design installs in a housing, allowing for easy servicing and replacement. By keeping fuel clean, these filters help ensure optimal combustion, improve engine efficiency, and reduce emissions. Carquest Premium Fuel Cartridge Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA

Carquest Premium Air Filters ensure your equipment runs smoothly with our high-quality filtration media that prevents airborne contaminants, such as dust, dirt, and debris, from reaching your combustion chamber. Protecting critical engine components from wear and damage helps maintain optimal engine power, improve fuel efficiency, and extend engine life – keeping your equipment performing at its best. Carquest Premium Air Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Axial seal primary air filter
• Made in USA
• Inside-Out Flow Direction

Carquest Premium Air Filters ensure your equipment runs smoothly with our high-quality filtration media that prevents airborne contaminants, such as dust, dirt, and debris, from reaching your combustion chamber. Protecting critical engine components from wear and damage helps maintain optimal engine power, improve fuel efficiency, and extend engine life – keeping your equipment performing at its best. Carquest Premium Air Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA
• Inside-Out Flow Direction

Carquest Premium Air Filters ensure your equipment runs smoothly with our high-quality filtration media that prevents airborne contaminants, such as dust, dirt, and debris, from reaching your combustion chamber. Protecting critical engine components from wear and damage helps maintain optimal engine power, improve fuel efficiency, and extend engine life – keeping your equipment performing at its best. Carquest Premium Air Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Axial seal primary air filter
• Made in USA

Carquest Premium Air Filters ensure your equipment runs smoothly with our high-quality filtration media that prevents airborne contaminants, such as dust, dirt, and debris, from reaching your combustion chamber. Protecting critical engine components from wear and damage helps maintain optimal engine power, improve fuel efficiency, and extend engine life – keeping your equipment performing at its best. Carquest Premium Air Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Axial seal primary air filter
• Made in USA
• Inside-Out Flow Direction

Carquest Premium Oil Spin-on Filters protect your engine by removing contaminants, such as dirt, metal particles, and sludge, from your engine oil. These filters effectively remove contaminants that can cause significant wear and damage to critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the oil clean, these filters help ensure proper lubrication and cooling, reduce friction and help extend engine life. Carquest Premium Oil Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Integral Post Seal
• Made in USA
• Includes Integral Post Seal

FRAM oil filters are designed for enhanced efficiency and capacity.

Water in diesel fuel is like a contaminant. It can erode the surfaces of orifices in precision injectors and cause corrosion in fuel systems. Fram Fuel Filter/Water Separators are specially designed to strip droplets of emulsified water from Diesel fuel and contain it in a reservoir at the bottom of the filter.

These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.

Product Features:

• Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
• Restores functionality – built to restore a proper seal
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:

• All the seals needed to complete the job
• Compatible with both R12 and R134a refrigerants
• SUV and rear air applications
• Application specific
• All the seals needed to complete the job
• Compatible with both R12 and R134a refrigerants
• SUV and rear air applications
• Application specific

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

• Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
• O-Rings necessary for installation are included.
• Color coded

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

• Meets or exceeds OE design and performance
• Magnetic size and properties compare or exceed OEM
• Windings meet or exceed OEM specifications
• Motor RPM equivalent to or exceeds OEM motor
• Meets or exceeds OE design and performance
• Magnetic size and properties compare or exceed OEM
• Windings meet or exceed OEM specifications
• Motor RPM equivalent to or exceeds OEM motor

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

• The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
• Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
• Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
• O-Rings necessary for installation are included.

Compatible with both R12 And R134a refrigerants; All the seals needed to complete the job; SUV And rear air applications; Application specific

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated
• High grade stainless steel and copper construction
• Meets or exceeds OEM standards

Carquest Premium Coolant Filters protect your engine’s cooling system by filtering out rust, scale, dirt, and other particles from the coolant fluid. Coolant filters remove contaminants that build up and cause clogging or corrosion in the radiator, water pump, heater core, and engine passages. By keeping the coolant clean and effective, these filters help prevent overheating and ensure optimal engine performance. Carquest Premium Coolant Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Standard life Spin-on coolant filter
• Made in USA
• Includes 4 Units BTA PLUS
• Maintenance filter for systems with 7-16 gallons capacity. Can be used with 89019 base.

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated
• High grade stainless steel and copper construction
• Meets or exceeds OEM standards

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

• High grade stainless steel and copper construction
• Meets or exceeds OEM standards
• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated
• High grade stainless steel and copper construction
• Meets or exceeds OEM standards

Carquest Premium Coolant Filters protect your engine’s cooling system by filtering out rust, scale, dirt, and other particles from the coolant fluid. Coolant filters remove contaminants that build up and cause clogging or corrosion in the radiator, water pump, heater core, and engine passages. By keeping the coolant clean and effective, these filters help prevent overheating and ensure optimal engine performance. Carquest Premium Coolant Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Standard life Spin-on coolant filter
• Made in USA
• Includes 8 Units BTA PLUS
• Maintenance filter for systems with 22-32 gallons capacity. Can be used with 89019 base.

Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant.

Product Features:

• High grade stainless steel and copper construction
• Meets or exceeds OEM standards
• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

• All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
• Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
• All accumulators and receiver driers are helium leak tested prior to packaging.
• O-Rings necessary for installation are included.

Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant.

Product Features:

• High grade stainless steel and copper construction
• Meets or exceeds OEM standards
• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

• High grade stainless steel and copper construction
• Meets or exceeds OEM standards
• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated

Gates carries a huge line of water pumps for heavy duty applications. Our heavy duty water pump offering is designed to handle rugged Fleet standards.

Product Features:

• Our heavy-duty water pump operation is designed to handle harsh and harsh conditions.
• Bearings and seals 100% tested separately.
• Computerized machined surfaces for proper fit and sealing
• Gates heavy-duty water pumps are represented as a part number with an HD suffix
• Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
• New pumps manufactured to ISO/TS 16949 standards

Gates carries a huge line of water pumps for heavy duty applications. Our heavy duty water pump offering is designed to handle rugged Fleet standards.

Product Features:

• Our heavy-duty water pump operation is designed to handle harsh and harsh conditions.
• Bearings and seals 100% tested separately.
• Computerized machined surfaces for proper fit and sealing
• Gates heavy-duty water pumps are represented as a part number with an HD suffix
• Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
• New pumps manufactured to ISO/TS 16949 standards

Gates carries a huge line of water pumps for heavy duty applications. Our heavy duty water pump offering is designed to handle rugged Fleet standards.

Product Features:

• Our heavy-duty water pump offering is designed to handle severe and rigorous conditions
• Fully tested unitized bearings and seals
• Computerized machined surfaces for proper fit and sealing
• Gates heavy water pumps are represented as a part number with an HD suffix
• Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
• New pumps manufactured to ISO/TS 16949 standards

Gates carries a huge line of water pumps for heavy duty applications. Our heavy duty water pump offering is designed to handle rugged Fleet standards.

Product Features:

• Our heavy-duty water pump offering is designed to handle severe and rigorous conditions
• 100 percent fully tested unitized bearings and seals
• Computerized machined surfaces for proper fit and sealing
• Gates heavy water pumps are represented as a part number with an HD suffix
• Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
• New pumps manufactured to ISO/TS 16949 standards

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

• Meets or exceeds OE design and performance
• Magnetic size and properties compare or exceed OEM
• Windings meet or exceed OEM specifications
• Motor RPM equivalent to or exceeds OEM motor
• Meets or exceeds OE design and performance
• Magnetic size and properties compare or exceed OEM
• Windings meet or exceed OEM specifications
• Motor RPM equivalent to or exceeds OEM motor

This back plate is an all new, original equipment-quality component for proper fit and long-life performance. Each plate is precision machined for optimal impeller clearance, plus all new back plates are 100% factory tested to assure the highest quality product. Each unit is built to meet or exceed all Original Equipment specifications and is validated for fit, form, and function. Also, application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust.

Product Features:

• This plate may become worn during normal engine operation
• It is highly recommended that the plate be replaced at the same time as the pump
• Machined grey iron plate
• Creates optimized impeller clearance for maximum coolant flow
• Follow all enclosed instructions to maximize plate life and validate warranty

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

• High grade stainless steel and copper construction
• Meets or exceeds OEM standards
• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated

Carquest Premium Coolant Filters protect your engine’s cooling system by filtering out rust, scale, dirt, and other particles from the coolant fluid. Coolant filters remove contaminants that build up and cause clogging or corrosion in the radiator, water pump, heater core, and engine passages. By keeping the coolant clean and effective, these filters help prevent overheating and ensure optimal engine performance. Carquest Premium Coolant Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Standard life Spin-on coolant filter
• Made in USA
• Includes 15 Units BTA PLUS
• Maintenance filter for systems with 44-51 gallons capacity. Can be used with 89019 base.

Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant.

Product Features:

• High grade stainless steel and copper construction
• Meets or exceeds OEM standards
• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

• Constructed with heat and ozone resistant EPDM rubber
• Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
• Made with treated polyester cord to reduce belt stretch

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:

• Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
• Engineered to help address noise issues caused by the belt drive 
• Capable of handling more extreme temperatures and workloads

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

• This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
• Polyester cords provide extreme tension-holding capability for longer belt life
• The raw edge belt design delivers the maximum gripping power
• The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:

• Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
• Engineered to help address noise issues caused by the belt drive 
• Capable of handling more extreme temperatures and workloads

This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:

• Constructed with heat and ozone resistant EPDM rubber
• Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
• Made with treated polyester cord to reduce belt stretch
• Meets OEM requirements

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

• Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
• Provides greater durability and flexibility – 35% stronger than all previous versions
• Features specially treated cords for added strength, stability and reliability
• Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

• Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
• Provides greater durability and flexibility – 35% stronger than all previous versions
• Features specially treated cords for added strength, stability and reliability

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
• Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
• Thermally active pull cords for maintenance-free operation when the strap is properly installed and tensioned
• Resists oil, heat, ozone, weather, and decay to improve belt life
• Meets or exceeds SAE J636C specifications

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

• Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
• Provides greater durability and flexibility 35% stronger than all previous versions
• Features specially treated cords for added strength, stability and reliability
• Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• The patented material provides optimal performance at extremely high operating temperatures.
• Heavy-duty construction resists cracking, wear, oil and heat
• The special compound provides unprecedented flexibility, stability, load-bearing capacity and belt life.
• Unique under-cord notch pattern provides greater flexibility for smaller diameter pulleys
• Problem solver for troubled drives
• Designed to save your fleet money and reduce downtime
• Meets RMA standards for oil and heat resistance and static conductivity requirements

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

• Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
• High modulus, high strength tensile cord
• Oil and heat resistant construction
• Meets SAE J636b and SAE J637 specifications
• Meets RMA standards for oil and heat resistance and static conductivity requirements
• NOTE: Some sizes available as Gates PowerBand attached V-belts

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

• Specifically-engineered materials resist collapse under vacuum
• Engineered to resist electrochemical degradation, the leading cause of hose failure
• Pre-formed for a good fit and to ensure perfectly sealed connections
• EPDM Tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone and chemical refrigerants
• Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
• Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
• Warning: Do not use for fuel or oil transfer applications

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Patented material provides peak performance at extremely prolonged operating temperatures
• Heavy-duty construction resists cracking, wear, oil and heat
• Special compound provides unmatched stability, load carrying capacity and belt life
• Unique under-cord notch pattern provides greater flexibility for smaller diameter pulleys
• Problem solver for failed disks
• Designed to save your fleet’s money and reduce downtime
• Meets RMA oil and heat resistant standards and static conductivity requirements

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

• Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
• EPDM rubber constructions resist cracking on the rib surface
• Meets or exceeds all specifications from the Original Equipment Manufacturer
• Tensioner Replacement is Recommended (if equipped)
• Unique form grinding of each individual belt assures precise dimensional control.
• Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:

• Engineered to handle operating conditions with temperatures up to 130°C (266°F)
• Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
• Capable of delivering excellent performance in high torque and high power pulse applications
• Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
• Ground to ensure precise dimensional control of the top width and sidewall for proper adjustment to the pulley.
• Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
• Resists oil, heat, ozone, weather and aging for improved belt life
• Meets or exceeds SAE J636C specifications

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Patented material provides peak performance at extremely prolonged operating temperatures
• Crack, wear, oil, and heat resistant construction
• The special compound provides unprecedented flexibility, stability, load-bearing capacity and belt life.
• Unique notch pattern offers greater flexibility for smaller diameter pulleys
• Problem solver for failed disks
• Engineered to save your fleet money and reduce downtime
• Meets RMA standards for oil and heat resistance and static conductivity requirements

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

• Materials specially designed to resist collapse in a vacuum
• Designed to resist electrochemical degradation, which is the leading cause of hose failure
• Pre-shaped to fit and ensure a perfect seal
• EPDM tube; synthetic fiber knit reinforcement; heat, ozone- and chemical coolant-resistant EPDM cover
• Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
• Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
• Warning: Do not use for fuel or oil transfer applications

Product Features:

• Fiber-loaded rubber mount adds flexibility along the belt and provides greater lateral stability on the pulley
• Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
• Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
• Resists oil, heat, ozone, weather and aging for improved belt life
• Meets or exceeds SAE J636C specifications

Heavy-duty construction assures dependable operation in truck, bus and off-road equipment heater systems. For a maintenance free connection, install with Power-Grip SB clamps. Approved for marine applications.

Product Features:

• Green strip construction offers the best cost per mile
• Abrasion resistant cover
• Engineered with materials to resist electrochemical degradation
• Reduces water loss from water permeating the hose wall and cover
• Exceeds SAE 20R1 Type EC (Class D-1 tube and cover Standard Wall)
• Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
• Note: For a maintenance-free connection, use PowerGrip SB clamps
• Caution: Do not use for fuel or oil transportation applications.
• PLEASE NOTE: Item is priced and sold by the foot. See store for details.

ZEREX G05® is the automaker approved original chemistry used in newer Ford®, Chrysler® and Mercedes-Benz® automotive and diesel engines. Its Hybrid Organic Acid Technology (HOAT) chemistry combines the best of conventional and organic acid-based chemistry to provide the ultimate protection against rust and corrosion. ZEREX G05 antifreeze/coolant uses the highest-quality virgin ethylene glycol for freeze and boil over protection and a hybrid organic acid corrosion inhibitor package to protect your engines from liner pitting and corrosion.

Product Features:

• Automaker approved technology. Provides protection for 5 years / 150,000 miles in light duty applications and 3 years / 300,000 miles in heavy duty applications.
• Formulated for long life performance
• Low-silicate, low-pH and phosphate-free formula
• Helps protect all cooling system metals, including aluminum

ZEREX G05® is the automaker approved original chemistry used in newer Ford®, Chrysler® and Mercedes-Benz® automotive and diesel engines. Its Hybrid Organic Acid Technology (HOAT) chemistry combines the best of conventional and organic acid-based chemistry to provide the ultimate protection against rust and corrosion. ZEREX G05® antifreeze/coolant uses the highest quality virgin ethylene glycol for freeze and boil over protection and a hybrid organic acid corrosion inhibitor package to protect your engines from liner pitting and corrosion.

Product Features:

• Automaker approved technology. Provides protection for 5 years / 150,000 miles in light duty applications and 3 years / 300,000 miles in heavy duty applications
• Formulated for long life performance
• Low-silicate, low-pH and phosphate-free formula
• Helps protect all cooling system metals, including aluminum

Prestone Command Nitrites (NOAT) Extended Life (ELC) antifreeze+coolant (ready to use) is designed to work with all Class 6-8 vehicles. When compared to ESI and low silicate conventional, it is designed to help lower maintenance costs and improve water pump life. It is compatible with any Nitrites OAT engine. This formula is Nitrites and provides excellent protection for aluminum and all other engine metals. Command NOAT ELC protects against liner pitting and corrosion protections.

Product Features:

• Nitrites Extended Life Coolant – NOAT ELC – Red formula. Compatible with any Nitrites OAT
• Helps lower maintenance costs and improve water pump life when compared to ESI coolants
• Meets OEM Performance requirements: ASTM D6210, D3306, D4985; TMC RP329A, RP338A, RP364; Cummings CES 14439; Cat EC-1 and many OEM requirements
• Ready to Use formula (prediluted to a 50% Eg and 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system

Prestone All Vehicles antifreeze+coolant (ready to use) is truly designed to work with all vehicles; all makes, models, years and fluid colors. It is designed to work with all new engines while also being backwards compatible improving protection in all older engines. The patented Cor-Guard technology (the best innovation in the category in decades) instantly protects parts from corrosion, buildup, pitting, scaling, rust and other damage. These fluids are specially designed to not only manage the engine temp and protect from freezing up (like competitors), but they also protect the engine from damage. Internal damage can cause engine part failure, leading to expensive repairs and serious inconveniences . Avoid costly repairs and vehicles in the shop with Prestone All Vehicles antifreeze+coolant. This fluid is designed to last 10yrs/300,000 miles and also to protect the internal parts of the engine for 10yrs/300,000, officially patented by Prestone.

Product Features:

• Formulated to work with All Vehicles. Works with all fluid colors; All OAT, POAT, HOAT and IAT.
• Longer Engine Life Guarantee – 10 year/300,000 mile Extended life formula.
• Includes patented Prestone CorGuard technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
• Ready to Use formula (prediluted to a 50% Eg and 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system

Prestone All Vehicles antifreeze+coolant (concentrate) is truly designed to work with all vehicles; all makes, models, years and fluid colors. It is designed to work with all new engines, while also being backwards compatible improving protection in all older engines. The patented Cor-Guard technology (the best innovation in the category in decades) instantly protects parts from corrosion, buildup, pitting, scaling, rust and other damage. Prestone’s Antifreeze + Coolants are designed to the highest standards using state of the art technology. These fluids are specially designed to not only manage the engine temp and protect from freezing up (like competitors), but they also protect the engine from damage. internal damage can cause engine part failure, expensive repairs and serious inconveniences . Avoid costly repairs and vehicles in the shop with Prestone All Vehicles antifreeze+coolant. This fluid is designed to last 10yrs/300,000 miles and also to protect the internal parts of the engine for 10yrs/300,000, officially patented by Prestone.

Product Features:

• Formulated to work with All Vehicles. Works with all fluid colors; All OAT, POAT, HOAT and IAT.
• Longer Engine Life Guarantee – 10 year/300,000 mile Extended life formula.
• Includes patented Prestone CorGuard technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
• Concentrate formula. Must mix with distilled to the desired mix ratio of EG and water. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

FRAM Extended Life AMAM Concentrate is compatible with any antifreeze/coolant in any vehicle with aluminum or other cooling system metals. The formulas have a blend of long-lasting inhibitors to guard against temperature extremes and the effects of rust, corrosion, and premature water pump failure. FRAM Concentrate meets or exceeds ASTM D3306 and D4985 for corrosion protection for cars and light duty trucks, while providing reliable freeze-up and boil-over protection.

Product Features:

• Formulated to work with All Vehicles. Works with all fluid colors; All OAT, POAT, HOAT and IAT.
• Longer Engine Life Guarantee – 5 year/150,000 mile Extended life formula.
• Includes patented technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 150,000 miles.
• Concentrate formula. Must mix with distilled to the desired mix ratio of EG and water. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

FRAM Extended Life AMAM 50/50 is compatible with any antifreeze/coolant in any vehicle with aluminum or other cooling system metals. The formulas have a blend of long-lasting inhibitors to guard against temperature extremes and the effects of rust, corrosion, and premature water pump failure. Top-off your cooling system with FRAM Extended Life AMAM 50/50, which is a blend of 50% antifreeze and 50% demineralized water. FRAM 50/50 meets or exceeds ASTM D3306 and D4985 for corrosion protection for cars and light duty trucks, while providing reliable freeze-up and boil-over protection.

Product Features:

• Formulated to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT and IAT
• 5 year/150,000 mile Extended life formula.
• Meets or exceeds ASTM D3306 and D4985 for corrosion protection.
• Ready to Use formula (prediluted to a 50% Eg and 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system

PEAK FINAL CHARGE Global Full Strength Extended Life Coolant/Antifreeze is an Organic Acid Technology (OAT), globally formulated, ethylene glycol-based coolant, which uses organic acid inhibitors (non-2-EH) to provide guaranteed protection for all cooling system metals. With proper maintenance, (1) FINAL CHARGE Global Extended Life Coolant/Antifreeze delivers guaranteed cooling system protection for ONE MILLION MILES of on-road use (8 years or 20,000 hours of off-road use) without the use of Supplemental Coolant Additives (SCAs). FINAL CHARGE Global Extended Life Coolant/Antifreeze is nitrite-free, phosphate-free, silicate-free, and borate-free. (1)Proper maintenance requires a complete cooling system flush and fill – and subsequent topping off, as needed – with FINAL CHARGE Global Extended Life 50/50 Pre-diluted Coolant/Antifreeze or Final Charge Global Extended Life Coolant/Antifreeze and water. For guaranteed protection, no other products or product supplements may be used.

Product Features:

• Works in ALL heavy duty diesel, gasoline and natural gas engine cooling systems
• Guaranteed protection for ONE MILLION MILES of on-road use (8 years or 20,000 hours of off-road use) (Proper maintenance requires a complete cooling system flush and fill – and subsequent topping off, as needed)
• Eliminates the need for SCAs and chemically charged ?lters & Excellent heat transfer for high temperature applications such as engines with EGR and SCR systems
• Outstanding protection against corrosion and cavitation. Non-abrasive formula can improve water pump seal life.
• Eliminates drop-out, gel and reduces scale.
• Can be mixed with other coolants (to maintain corrosion protection contamination levels should be kept below 25%). Provides exceptional long term elastomer compatibility
• Testing Requirements: For proper freeze and boil over protection, use a traditional refractometer or hydrometer to measure the percentage of ethylene glycol by volume.

Prestone Command Nitrites (NOAT) Extended Life (ELC) antifreeze+coolant (Concentrate) is designed to work with all Class 6-8 vehicles. When compared to ESI and low silicate conventional, it is designed to help lower maintenance costs and improve water pump life. It is compatible with any Nitrites OAT engine. This formula is Nitrites and provides excellent protection for aluminum and all other engine metals. Command NOAT ELC protects against liner pitting and corrosion protections.

Product Features:

• Nitrites Extended Life Coolant – NOAT ELC – Red formula. Compatible with any Nitrites OAT
• Helps lower maintenance costs and improve water pump life when compared to ESI coolants
• Meets OEM Performance requirements: ASTM D6210, D3306, D4985; TMC RP329A, RP338A, RP364; Cummings CES 14439; Cat EC-1 and many OEM requirements
• Concentrated formula. Must mix with high quality (distilled/deionized) water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

Prestone Command Cor-Guard Nitrite Free (NF-OAT) Extended Life (ELC) antifreeze+coolant (Concentrate) is designed to work with all Class 1-8 vehicles; Heavy Duty and Light Duty. COR-GUARD technology increases uptime; More miles between service = Less cost to maintain. Utilizing Cor-Guard technology, this formula is designed to protect cooling system parts from corrosion and damage. It instantly protects against the spread of rust, corrosion, pitting, gunk, grime and build-up. It is one fluid that can be used for the whole fleet; all vehicles, coolant colors (LD) and any Nitrite Free OAT engine (HD). Service life is 1,000,000 Miles/20,000 hrs [class 7-8 with wet sleeve liners]. When compared to ESI and low silicate conventional, it is designed to help lower maintenance costs and improve water pump life. This formula is Nitrite Free, provides excellent protection for aluminum and all other engine metals and eliminates the need to add supplemental coolant additives.

Product Features:

• Cor-Guard Nitrite Free Extended Life Coolant – NF-OAT ELC – RED formula. Compatible with any Nitrite Free OAT and all Light Duty vehicles
• COR-GUARD technology increases uptime; More miles between service = Less cost to maintain. Instantly stops the spread of rust, corrosion, pitting, gunk, grime and build-up
• Meets OEM Performance requirements: ASTM D6210, D3306, D4985, D7583; TMC RP338A, RP364; Cummings CES 14603, bulletin 3666132; Detroit Diesel 93K217; Cat EC-1 and many OEM requirements
• Concentrated formula. Must mix with high quality (distilled/deionized) water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

Prestone Platinum antifreeze+coolant is Prestone’s best universal antifreeze and coolant product. Guaranteed to work with all vehicles; all makes, models, years and fluid colors. 15+ years, 350,000 miles of protection; the fluid is Guaranteed for the life of your vehicle. This advanced product delivers Extreme Protection against both freezing temperatures (-50 deg.) and overheating/boiling over of the engine (+268 deg.). Prestone Platinum utilizes industry leading protection from engine damaging rust, corrosion, buildup and scale. While ordinary antifreeze coolant only focuses on the basic corrosion coverage, Prestone Platinum goes farther, adding our most advanced cooling system protection, allowing the system to run optimally, like when it was new. Internal buildup and corrosion damage can cause engine part failure or clogging, leading to expensive repairs and inconveniences. Prestone Platinum helps you avoid costly repairs and vehicles in the shop. This extended life coolant is Guaranteed to work with all new engines and engine technology, while also being backwards compatible, improving protection in all older engines. Prestone Platinum antifreeze+coolant – Year Round Protection.

Product Features:

• Guaranteed to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT and IAT; G05, G11, G12, G12++, G13, G30, G40, and GG40. For all engines and engine sizes, new and older engines.
• 15+ year/350,000 mile Extended life formula. The fluid is guaranteed for the life of your vehicle
• Includes our most advanced Prestone Cor-Guard technology, unmatched cooling system parts protection that protects against engine damage; rust, corrosion, scale, build-up and clogging. Protection for 15+yrs/350,000 miles.
• Concentrated formula. Must mix with high quality water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

All Antifreeze + Coolants are not the same. Prestone MAX antifreeze + coolant is Guaranteed to provide maximum engine protection in all Vehicle Makes, Models and Years. It delivers the widest range of temperature protection, industry leading protection from engine damaging rust and corrosion and the longest lasting protection in the industry. Trust Prestone for maximum, year-round engine protection.

Product Features:

• Can top off or replace all antifreeze + coolant colors and formulations in all Vehicle Makes, Models and Years – Guaranteed.
• Our patented, advance formula provides extreme temperature protection from the worst of winter deep freezes and scorching summer heat.
• We deliver industry leading protection from engine damaging rust, corrosion and buildup. Prestone MAX completely stops the formation of rust and corrosion for better engine performance and longer engine life.
• Prestone Max is guaranteed to protect your vehicle for 15+ years and/or 350,000 miles. It’s the longest fluid life in the industry.
• This is a Concentrated Formula. Must mix with high quality water to the desired ratio.

Prestone Command Cor-Guard Nitrite Free (NF-OAT) Extended Life (ELC) antifreeze+coolant (ready to use) is designed to work with all Class 1-8 vehicles; Heavy Duty and Light Duty. COR-GUARD technology increases uptime; More miles between service = Less cost to maintain. Utilizing Cor-Guard technology, this formula is designed to protect cooling system parts from corrosion and damage. It instantly protects against the spread of rust, corrosion, pitting, gunk, grime and build-up. It is one fluid that can be used for the whole fleet; all vehicles, coolant colors (LD) and any Nitrite Free OAT engine (HD). Service life is 1,000,000 Miles/20,000 hrs [class 7-8 with wet sleeve liners]. When compared to ESI and low silicate conventional, it is designed to help lower maintenance costs and improve water pump life. This formula is Nitrite Free, provides excellent protection for aluminum and all other engine metals and eliminates the need to add supplemental coolant additives.

Product Features:

• Cor-Guard Nitrite Free Extended Life Coolant – NF-OAT ELC – RED formula. Compatible with any Nitrite Free OAT and all Light Duty vehicles
• COR-GUARD technology increases uptime; More miles between service = Less cost to maintain. Instantly stops the spread of rust, corrosion, pitting, gunk, grime and build-up
• Meets OEM Performance requirements: ASTM D6210, D3306, D4985, D7583; TMC RP338A, RP364; Cummings CES 14603, bulletin 3666132; Detroit Diesel 93K217; Cat EC-1 and many OEM requirements
• Ready to Use formula (prediluted to a 50% Eg and 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system

Prestone Platinum antifreeze+coolant is Prestone’s best universal antifreeze and coolant product. Guaranteed to work with all vehicles; all makes, models, years and fluid colors. 15+ years, 350,000 miles of protection; the fluid is Guaranteed for the life of your vehicle. This advanced product delivers Extreme Protection against both freezing temperatures (-50 deg.) and overheating/boiling over of the engine (+268 deg.). Prestone Platinum utilizes industry leading protection from engine damaging rust, corrosion, buildup and scale. While ordinary antifreeze coolant only focuses on the basic corrosion coverage, Prestone Platinum goes farther, adding our most advanced cooling system protection, allowing the system to run optimally, like when it was new. Internal buildup and corrosion damage can cause engine part failure or clogging, leading to expensive repairs and inconveniences. Prestone Platinum helps you avoid costly repairs and vehicles in the shop. This extended life coolant is Guaranteed to work with all new engines and engine technology, while also being backwards compatible, improving protection in all older engines. Prestone Platinum antifreeze+coolant – Year Round Protection.

Product Features:

• Guaranteed to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT and IAT; G05, G11, G12, G12++, G13, G30, G40, and GG40. For all engines and engine sizes, new and older engines.
• 15+ year/350,000 mile Extended life formula. The fluid is guaranteed for the life of your vehicle
• Includes our most advanced Prestone Cor-Guard technology, unmatched cooling system parts protection that protects against engine damage; rust, corrosion, scale, build-up and clogging. Protection for 15+yrs/350,000 miles.
• Ready to Use formula – Prediluted 56/54. Perfect for small volume top-off or complete drain and refill of the cooling system

All Antifreeze + Coolants are not the same. Prestone MAX antifreeze + coolant is Guaranteed to provide maximum engine protection in all Vehicle Makes, Models and Years. It delivers the widest range of temperature protection, industry leading protection from engine damaging rust and corrosion and the longest lasting protection in the industry. Trust Prestone for maximum, year-round engine protection.

Product Features:

• Can top off or replace all antifreeze + coolant colors and formulations in all Vehicle Makes, Models and Years – Guaranteed.
• Our patented, advance formula provides extreme temperature protection from the worst of winter deep freezes and scorching summer heat.
• We deliver industry leading protection from engine damaging rust, corrosion and buildup. Prestone MAX completely stops the formation of rust and corrosion for better engine performance and longer engine life.
• Prestone Max is guaranteed to protect your vehicle for 15+ years and/or 350,000 miles. It’s the longest fluid life in the industry.
• This is a Ready to Use formula – prediluted 56/44.