1996 Ford F-250 Pickup Fuel and Emissions Systems

Essential 1996 Ford F-250 Pickup Fuel and Emissions Systems

Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1004)

Secondary Air Injection Pump Check Valve

from

$18.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Idle Air Control Valve (Part No.ACA1029)

Idle Air Control Valve

from

$129.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Motorcraft – Vacuum Control Valve (Part No.D3020672044MTR)

Vacuum Control Valve

from

$15.32
Vacuum Control Valve

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

Fuel Cap Tester Adapter

from

$15.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Carquest Premium – Injection Pressure Regulator (IPR) Valve (Part No.AC20082)

Injection Pressure Regulator (IPR) Valve

from

$232.99
Injection control pressure determines fuel injection quantity under varying engine operating conditions. Improper injection quantity can result in poor engine performance or a no-start condition. New IPR valve is manufactured to meet or exceed original equipment performance specifications to ensure precise control of injection oil pressure.

Product Features:
  • Original equipment fit, form and function
  • Manufactured to precise OE performance specifications
See More

Cardone – Diesel Fuel Injector Driver Module (Part No.78-2001)

Diesel Fuel Injector Driver Module

from

$507.99
CARDONE Remanufactured Injector Driver Modules are engineered for quick installation and no comebacks. Each unit is engineered to meet or exceed OEM performance. All modules are 100% computerized tested and resolder of critical components, as well as 100% replacement of common ware components, ensuring superior electrical connections.

Product Features:
  • 100% resolder of critical components ensures superior electrical connections, no intermittent failures and longer product life
  • All modules are 100% tested with automated computerized test equipment to ensure functionality and reliability
  • Common wear components are identified and replaced 100% to ensure reliable performance
  • On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements
  • Guaranteed fit and function
  • Meets or exceeds O.E.M. performance
See More

Delphi – Fuel Pump Strainer (Part No.FS0127)

Fuel Pump Strainer

from

$32.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Filtration performance and micron rating meet or exceed OE requirements
  • OE replacement strainer designed for use with Delphi electric fuel pumps
  • Replacing the strainer is always recommended when replacing a fuel pump
See More

Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)

Electric Fuel Pump Inertia Switch

from

$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Pressure Feedback Hose (Part No.EGC2611)

Exhaust Gas Recirculation (EGR) Pressure Feedback Hose

from

$27.99
Exhaust Gas Recirculation (EGR) Pressure Feedback Hose

Felpro – Carburetor Mounting Gasket (Part No.60244)

Carburetor Mounting Gasket

from

$3.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Delphi – Fuel Injection Pressure Sensor (Part No.HTS102)

Fuel Injection Pressure Sensor

from

$356.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi products are manufactured in a Delphi ISO certified facility
  • All parts are tested utilizing OE methodologies
  • Part is validated, tested and matched to the right vehicle application
  • All parts are Delphi validated
See More

Dorman – Diesel Fuel Injection and Glow Plug Inner Harness (Part No.904-201)

Diesel Fuel Injection and Glow Plug Inner Harness

from

$56.99
This replacement fuel injector harness matches the fit and function of the original equipment part to restore proper operation of the injection system. Made of quality materials, it features full insulated electrical connectors to prevent corrosion.

Product Features:
  • Ideal replacement – this fuel injector harness matches the original equipment part on specified vehicle years, makes and models
  • Durable construction – this harness includes fully insulated electrical connectors to prevent corrosion
  • Plug and play installation – made with factory-style connectors for quick, reliable installation
  • Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
See More

Carquest Premium – Fuel Tank Vent Valve (Part No.RVC1002)

Fuel Tank Vent Valve

from

$58.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4210)

Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit

from

$80.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Delphi – Fuel Pump Hanger Assembly: With Float Arm, Lock Ring, Seal (Part No.HP10170)

Fuel Pump Hanger Assembly: With Float Arm, Lock Ring, Seal

from

$139.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Lower failure rates due to its innovative design and durability
  • Part is validated, tested and matched to the right vehicle application
  • Lower amperage draws less load on vehicle’s electrical system
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
See More

Dorman – Engine Vacuum Pump Pulley (Part No.300-700)

Engine Vacuum Pump Pulley

from

$29.99
This vacuum pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this vacuum pump pulley is designed to match the fit and function of the original pulley on specified applications
  • Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Flowtech – Reducer w/O2 Sensor Fitting (Part No.10110FLT)

Reducer w/O2 Sensor Fitting

from

$65.99


Product Features:
  • Reducer With O-Sensor Fitting
  • Made In USA
See More

Carquest Premium – Water in Fuel (WiF) Sensor (Part No.FSA1016)

Water in Fuel (WiF) Sensor

from

$58.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Cardone – Vacuum Pump (Part No.64-1006)

Vacuum Pump

from

$159.99
CARDONE Remanufactured Vacuum Pumps are engineered for quick installation and no comebacks. Each unit is engineered and tested to meet or exceed O.E.M performance, providing you reliable performance, every time. Original design weaknesses are corrected to make a longer lasting part you and your vehicle can rely on.

Product Features:
  • 100% NEW check valves, diaphragms, O-rings and seals prevent leaks and ensure proper vacuum required to efficiently run vehicle accessories
  • 100% computer testing guarantees reliable performance
  • Engineered to meet or exceed O.E.M.performance
  • Designed for easy installation
  • Guaranteed fit and function
See More

Motorcraft – MAP Sensor: Essential for Optimal Performance, For Ford and Lincoln Vehicles (Part No.C7044399476MTR)

MAP Sensor: Essential for Optimal Performance, For Ford and Lincoln Vehicles

from

$92.05
Motorcraft MAP sensors are the only MAP sensors recommended by Ford Motor Company for use in Ford and Lincoln vehicles.

Product Features:
  • New and remanufactured available to help meet your customers’ needs
  • Units come ready to plug and play, with no need for modifications
  • Optimizes fuel consumption and emissions to help ensure vehicles meet various state smog-level requirements
  • Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
  • Design includes OE innovations and upgrades
See More

NTK – Air Charge Temperature Sensor (Part No.EF0016)

Air Charge Temperature Sensor

from

$30.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Carquest Premium – Diesel Injection Control Pressure Sensor (Part No.HMA1005K)

Diesel Injection Control Pressure Sensor

from

$164.99
The Premium CarQuest® Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The injection control pressure (ICP) sensor monitors and relays the oil pressure inside the high pressure oil rails to on-board computers, helping to ensure smooth and proper fuel injector actuation and operation. Properly pressurized oil delivery is critical to the hydraulically activated electronically assisted unit injector (HEUI) fuel injection system, and when this system fails to operate properly the on-board computers may throw a code and illuminate a check engine light. A failing or improperly functioning injection control pressure sensor will provide erratic or inaccurate readings to on-board computers, severely affecting fuel injection performance and system function. Tell-tale signs of failing or failed injection control pressure sensor are rough idle and operation, power loss and the inability to start the vehicle in more severe cases.

Product Features:
  • The Premium CarQuest® Vehicle Solutions line of ICP sensors offer an extremely robust design, manufactured on OE production lines. The ICP sensor kit includes all necessary components for a professional installation.
  • Designed and manufactured with highest quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your injection control pressure sensor.
  • Upgraded materials compared to OE, including stainless steel housings and upgraded thermoplastics for superior corrosion resistance and high temperature performance.
  • Hermetically sealed, robotically laser-welded stainless steel housing creates a burst proof structure and superior environmental sealing protection from the elements.
  • All units are 100% helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are 100% tested using automated end-of-line testing equipment that pressurizes the sensor and checks full-spectrum functionality and electrical output to ensure each sensor meets manufacturing specifications before packaging.
See More

Dorman – Injection Pressure Regulator Seal Kit (Part No.904-232)

Injection Pressure Regulator Seal Kit

from

$33.49
This fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles
  • Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

NTK – EGR Pressure Sensor (Part No.EA0009)

EGR Pressure Sensor

from

$69.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK’s EGR Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper monitoring and adjustments to the ignition and injector performance.
  • The Exhaust Gas Recirculation (EGR) Pressure sensor detects exhaust gas flow through the EGR passage.
See More

Carquest Premium – Fuel Injector Connector (Part No.ABA3465)

Fuel Injector Connector

from

$30.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Remanufactured Diesel High Pressure Oil Pump (Part No.AM92013)

Remanufactured Diesel High Pressure Oil Pump

from

$794.99
CARQUEST premium remanufactured high-pressure oil pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes pump gasket
See More

Carquest Premium – Valve Cover Gasket Connector Pigtail (Part No.AC20042)

Valve Cover Gasket Connector Pigtail

from

$31.99
This repair solution allows for the replacement of broken, melted or damaged connector plugs, which can cause intermittent connections, resulting in engine misfire and hard-starting. New harness connector pigtail ensures proper electrical signals are supplied to the injectors and glow plugs.

Product Features:
  • Valve cover gasket connector pigtail connects between engine harness and valve cover gasket
  • Two required per side
See More

Cardone – Smog Air Pump (Part No.32-280)

Smog Air Pump

from

$165.99
CARDONE Remanufactured Smog Pumps are engineered for quick installation and no comebacks. These pumps come with all necessary components for easy installation, while other brands leave out integral components, such as inlets and outlets that commonly break during installation. CARDONE engineers pay special attention to proper vane size and shape on each application to maintain proper flow, while other brands consolidate vane sizes for their own convenience.

Product Features:
  • 100% testing of all units guarantees reliable performance every time
  • High temperature grease extends bearing life, resulting in longer pump life
  • New carbon shoes/vanes on every unit ensure accurate air output to meet today’s stringent emissions standards
  • Guaranteed fit and function
  • Meets or exceeds O.E.M performance
See More

Popular 1996 Ford F-250 Pickup Fuel and Emissions Systems Categories

1996 Ford F-250 Pickup Fuel and Emissions Systems

You count on your 1996 Ford F-250 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 276 Fuel and Emissions Systems ranging in price from $2.24 to $914.26, you’re sure to find everything you need for your 1996 Ford F-250 Pickup.

Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 26 different brands like Carquest Premium, Felpro, and Motorcraft. 1996 Ford F-250 Pickup Fuel and Emissions Systems start as low as $2.24!

One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 7,149 extensive product reviews on 1996 Ford F-250 Pickup Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Oxygen Sensor: 4 Wire, 10.83" Long, Heated, Exact Fit with 4.5 stars and Oxygen Sensor: 4 Wire, 15.43" Long, Heated, Exact Fit with 4.6 stars.

Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1996 Ford F-250 Pickup below to get started!

Top-Rated Fuel and Emissions Systems Brands For Your 1996 Ford F-250 Pickup

Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1996 Ford F-250 Pickup running right for years to come. In our inventory you’ll find brands like Carquest Premium, Felpro, Motorcraft, and even more.

Popular Driveworks Fuel and Emissions Systems

You’ll find popular Driveworks brand products across Exhaust Gas Recirculation (EGR) Parts. All are waiting to get your 1996 Ford F-250 Pickup back on the road. Some of the top-rated Driveworks products in these categories are:
Exhaust Gas Recirculation (EGR) Pressure Sensor
from $89.05
(17)
Exhaust Gas Recirculation (EGR) Pressure Sensor
EGR Pressure Feedback Sensors

Top-Rated Carquest Premium Fuel and Emissions Systems


If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Fuel and Emissions Systems for your 1996 Ford F-250 Pickup, and some of our most reviewed Carquest Premium parts include:

FAQs for 1996 Ford F-250 Pickup Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the 1996 Ford F-250 Pickup?

Out of 276 Fuel and Emissions Systems for the 1996 Ford F-250 Pickup, the most popular in our inventory are:
Fuel Injector O-Ring Kit
from $7.49
(109)
Fuel Injector O-Ring Kit
Fuel Injector O-Ring Kits
O2 Sensor
from $71.99
(1)
O2 Sensor
Oxygen Sensors

What are the top-rated 1996 Ford F-250 Pickup Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your 1996 Ford F-250 Pickup based on customer reviews/ratings are:
Oxygen Sensor: 4 Wire, 10.83" Long, Heated, Exact Fit
from $56.99
(332)
Oxygen Sensor: 4 Wire, 10.83" Long, Heated, Exact Fit
“Easy installation”
Oxygen Sensor: 4 Wire, 15.43" Long, Heated, Exact Fit
from $59.99
(129)
Oxygen Sensor: 4 Wire, 15.43" Long, Heated, Exact Fit
“exact fit works fine”
Oxygen Sensor: 4 Wire, 10.63" Long, Heated, Exact Fit
from $49.99
(73)
Oxygen Sensor: 4 Wire, 10.63" Long, Heated, Exact Fit
“Exact fit for my Dodge Dakota;”