1996 Dodge Ram 3500 Bodies and Fender Parts

BodyMntBshKt

Spare tire hoist rusted out and corroded? This replacement hoist is specifically engineered to match the original design on specific vehicles, and it’s specially coated to resist future rust and corrosion.

Product Features:

• Direct replacement – this spare tire hoist is precisely engineered to replace the hoist that comes stock on specific vehicle years, makes and models
• Easy installation – simply remove the spare tire, unbolt the original part, and bolt on this replacement
• Functionality ensured – hoist appearance may vary slightly from original part but functions the same
• Corrosion resistant – specially coated to prevent future rust and corrosion

New Standard Replacement Driver Side Fender Liner, 4WD

Product Features:

• 4WD, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Premium Replacement Driver Side Fender

Product Features:

• Made Of Galvanized Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Corrosion Resistant Extruded Aluminum Board
• Slip Resistant Textured Step Surface
• Injection Molded Polymer End Caps
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit Available PN[27-6000]

Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Corrosion Resistant Extruded Aluminum Board
• Slip Resistant Textured Step Surface
• Injection Molded Polymer End Caps
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit Available PN[27-6000]

Emblem – Custom

LUND’s RX-Rivet Style fender flares are the perfect addition to lifted trucks, giving them a bold, unmistakable appearance. Designed for larger tires and wheels, LUND’s RX-Rivet Style flares will transform your Chevy Silverado, Toyota Tundra, GMS Sierra, Dodge Ram or Ford truck into an off-road, gutsy-appearing ride. This rivet style fender flare provides extra coverage on trucks with larger wheel and tire packages. Update your vehicle with an awesome, wide-body look while shielding it from road debris. The extra height of the flares is also a great quick fix for covering rust and minor damages on the fender. This distinctive fender flare, available in four-piece sets, is designed to not only add a rugged, off-road look, but also protect the sides of your vehicle from road debris and harsh outdoor elements. LUND’s RX-Rivet Style fender flares are made with ABS thermoplastic material to allow for maximum durability – providing a dense, hard and scratch-resistant surface, flexible enough to bend instead of shattering. This flare is built to last and is backed by a Limited Lifetime Warranty. Straight from the die, the flare has a satiny finish (standard) that looks great, but is easily prepped and painted for any sort of automotive paint. The flare is also available in a textured finish. Maintenance is easy! You can use any detergent you use to wash your vehicle to clean the flares as well.

Product Features:

• Bold And Aggressive Design
• Gives The Tundra Improved Protection Against Rocks And Debris
• Additional Coverage For Larger Tire And Wheel Packages
• Available In Two Finishes
• Tough And Durable Tri-Flex ABS Thermoplastic
• UV-Resistant To Protect Against Fading
• Polished Stainless Steel Hardware Included
• Easy No Drill Installation Utilizing Factory Attachment Locations
• Limited Lifetime Warranty
• Made In USA

LUND’s SX-Sport Style fender flares seamlessly add OE style to your Chevy Silverado, Toyota Tundra, GMC Sierra, Dodge Ram or Ford truck. This fender flare style is perfect for those looking for clean line accessories that blend well with their vehicle. The flares’ low profile complements the original design and contours of the wheel well while adding a distinctive style.This durable fender flare, available in two and four-piece sets, is designed to not only add style, but also protect the brilliant coat of paint and the sides of your vehicle from road debris and harsh outdoor elements and weather conditions. LUND SX-Sport Style fender flares are made with Tri-Flex ABS thermoplastic material to allow for maximum strength and flexibility-UV-resistant and built to last; backed by a Limited Lifetime Warranty. Straight from the die, the flare has a smooth (standard) or textured finish that looks great as is, but can also be easily prepped and painted to match your vehicle. Maintenance is easy! You can use any detergent to wash your vehicle to clean the flares as well.

Product Features:

• Bring A Neat And Seamless Style To Your Vehicle
• Perfect Clean Line Accessory
• Blends In Well And Looks Like It Came From The Factory
• Protects Your Vehicle From Road Debris
• Made From Durable OEM-Style ABS Plastic
• Can Be Prepped, Primed And Painted
• Installs Quickly With Included Fasteners
• No Modification Is Necessary
• Covers Rust And Fender Blemishes
• Designed For Perfect Fitment
• UV Resistant From Color Fading
• Limited Lifetime Warranty

Covercraft’s Custom Mask provides protection to your vehicle’s nose. These front end covers are a sporty way to protect your vehicle from road hazards. Tar, rocks and bugs cause paint chips, dents and dings to your vehicle’s finish. A Custom Mask helps protect the value of your vehicle for years to come. Made from high-quality vinyl that is quick drying. Will not damage your paint or finish. Two-piece design full front end mask, Fits the curves and contours of your specific vehicle, Dries itself while you drive, Installs easily in minutes, Shrink and fade resistant, 90-day warranty.

Product Features:

• Full Front Area Protection
• Protects Against Bugs, Rock Chips
• Hood Opens with Mask In Place (MM Series)
• Heavy Duty Vinyl with Soft Fleece Back
• Custom Patterned for Easy Installation
• Warranty: 90 Days

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

• Full front end coverage
• Custom fit exactly to your vehicle
• Installs easily with no drilling or tools
• Leather grain vinyl
• Protect against rock chips, bugs and road tar
• Soft inner layer

New Standard Replacement Driver Side Cab Floor, 46 X 15 X 10

Product Features:

• 46 X 15 X 10, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Economy Replacement Rear Step Bumper Face Bar, Chrome

Product Features:

• Chrome, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Premium Replacement Rear Step Step Bumper Face Bar, Chrome

Product Features:

• Chrome, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New ProEFX Rear Roll Pan With License Plate

Product Features:

• With License Plate
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New ProEFX Rear Roll Pan, Without License Plate Part

Product Features:

• Without License Plate Part
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications Comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

• Foam Construction
• Meets Quality Standards
• Bump Stops Prevent Expensive Body Damage To Lifted Jeep Vehicles
• Easy To Install

This jounce bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

New Standard Replacement Driver Side Rocker Panel, 2 Door Extened Cab, 76.25 X 7.5 X 4.25

Product Features:

• 2 Door Extened Cab, 76.25 X 7.5 X 4.25, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Rocker Panel, Outer Piece

Product Features:

• Outer Piece, Made Of Cold Rolled Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Rocker Panel, Standard And Club Cab Models, 55 X 10 X 5

Product Features:

• Standard And Club Cab Models, 55 X 10 X 5, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

The WeatherTech MudFlap – Laser Measured for a Perfect Fit set literally mounts-in-minutes (in most applications) without the need for wheel/tire removal, and most importantly – without the need for drilling into the vehicle fragile painted metal surface Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech MudFlap will offer undeniable vehicle protection.

Product Features:

• Protects Your Vehicle s Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Vehicle s Wheels
• Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
• Provide Protection For Your Vehicle Most Vulnerable Rust Area
• Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Molded From A Proprietary Thermoplastic Resin
• No Drilling Required And Installs In Minutes

The WeatherTech MudFlap Laser Measured for a Perfect Fit set literally mounts in minutes without the need for wheel or tire removal, and most importantly without the need for drilling into the vehicles fragile painted metal surface. Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech MudFlap will offer undeniable vehicle protection.

Product Features:

• Protects Your Vehicle s Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Vehicle s Wheels
• Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
• Provide Protection For Your Vehicles Most Vulnerable Rust Area
• Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Molded From A Proprietary Thermoplastic Resin
• No Drilling Required And Installs In Minutes

The WeatherTech MudFlap – Laser Measured for a Perfect Fit set literally mounts-in-minutes (in most applications) without the need for wheel/tire removal, and most importantly – without the need for drilling into the vehicle fragile painted metal surface Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech MudFlap will offer undeniable vehicle protection.

Product Features:

• Protects Your Vehicle Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Vehicle Wheels
• Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
• Provide Protection For Your Vehicles Most Vulnerable Rust Area
• Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Molded From A Proprietary Thermoplastic Resin
• No Drilling Required And Installs In Minutes

Take a step up with a set of LUND’s Round Bent Nerf Bars. These oval nerf bars are designed to custom fit your vehicle, complementing the overall look while providing you with safe, sure footing in and out of your vehicle – no matter your shoe type. In fact, each bar has a recessed step area with UV-resistant rubber grip pads providing solid traction and stability. LUND’s Round Bent Nerf Bars feature chrome-plated or all black matte finishes and are designed with a tubular shape and curved style, creating a rugged yet contemporary look and feel. Designed and engineered to go the distance LUND’s Round Bent Nerf Bars are constructed with a cutting-edge polymer material set within a lightweight, durable aluminum frame, making these bars tough as metal and virtually corrosion-free. These bars also offer a broad stepping area designed larger than traditional step bars.

Product Features:

• UV Resistant Polymer Pad
• Recessed Aluminum Frame
• Accents The Line Of Your Vehicle
• Limited 3 Year Warranty

Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish.

Product Features:

• Vehicle Specific Mounting Kit Required; Sold Separately
• 4 in. Oval Tube
• Injection Molded Polymer Step Pad
• Molded Oval End Caps
• Bolt-On Installation; No Drilling Required
• Limited Lifetime Warranty

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Rocker Panel Mount
• T304 Marine-Grade Stainless Steel Ensures Maximum Strength And Durability: Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
• Welded End Caps Add A Clean, Finished Appearance While Keeping The Elements Out: Steel Mounting Brackets Are Included To Install Steps With Ease
• Oval Step Shape Offers A Wider Stepping Area For Secure Footing
• Provides Moderate Protection Against Road Hazards And Debris