Essential 2004 Dodge Ram 3500 Bodies and Fender Parts

from

$148.99

New Standard Replacement Driver Rocker Panel Extension, 30.8 X 13.9 X 5

Product Features:

30.8 X 13.9 X 5, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$199.99

New ProEFX Rear Roll Pan Without License Plate

Product Features:

Without License Plate
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$104.99

New Standard Replacement Passenger Side Rear Upper Wheel Arch Patch, 39 3/8 X 15 1/2

Product Features:

39 3/8 X 15 1/2, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$2.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$122.99

New CAPA Certified Standard Replacement Driver Side Fender Liner, 4WD

Product Features:

4WD, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$46.99

AVS hood shields provide vehicle protection that is unmatched on the road today. Made from rugged, impact modified acrylic, each model is test fitted on an actual hood before it leaves the facility. Combined with signature AVS style, it’s protection that’s just a stones throw away.

Product Features:

The Unique Design Allows For Easy Hood Cleaning And Waxing
Easy To Install With Strong 3M Automotive Tape Or Mechanical Fasteners
Available In Smoke Impact-Modified Acrylic
Gives Your Car The Same Great Look And Protection As Our Bugflector Does For Trucks And Sport Utility Vehicles

from

$159.99

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

Full front end coverage
Custom fit exactly to your vehicle
Installs easily with no drilling or tools
Leather grain vinyl
Protect against rock chips, bugs and road tar
Soft inner layer

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$413.99

LUND’s SX-Sport Style fender flares seamlessly add OE style to your Chevy Silverado, Toyota Tundra, GMC Sierra, Dodge Ram or Ford truck. This fender flare style is perfect for those looking for clean line accessories that blend well with their vehicle. The flares’ low profile complements the original design and contours of the wheel well while adding a distinctive style.This durable fender flare, available in two and four-piece sets, is designed to not only add style, but also protect the brilliant coat of paint and the sides of your vehicle from road debris and harsh outdoor elements and weather conditions. LUND SX-Sport Style fender flares are made with Tri-Flex ABS thermoplastic material to allow for maximum strength and flexibility-UV-resistant and built to last, . Straight from the die, the flare has a smooth (standard) or textured finish that looks great as is, but can also be easily prepped and painted to match your vehicle. Maintenance is easy! You can use any detergent to wash your vehicle to clean the flares as well.

Product Features:

Bring A Neat And Seamless Style To Your Vehicle
Perfect Clean Line Accessory
Blends In Well And Looks Like It Came From The Factory
Protects Your Vehicle From Road Debris
Made From Durable OEM-Style ABS Plastic
Can Be Prepped, Primed And Painted
Installs Quickly With Included Fasteners
No Modification Is Necessary
Covers Rust And Fender Blemishes
Designed For Perfect Fitment
UV Resistant From Color Fading

from

$413.99

BodyMntBshKt

from

$537.99

New Economy Replacement Rear Step Bumper Assembly, Chrome (Includes Inner And Outer Brackets/Pad And Lights)

Product Features:

Chrome (Includes Inner And Outer Brackets/Pad And Lights), Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$164.99

Spare tire hoist rusted out and corroded? This replacement hoist is specifically engineered to match the original design on specific vehicles, and it’s specially coated to resist future rust and corrosion.

Product Features:

Direct replacement – this spare tire hoist is precisely engineered to replace the hoist that comes stock on specific vehicle years, makes and models
Easy installation – simply remove the spare tire, unbolt the original part, and bolt on this replacement
Functionality ensured – hoist appearance may vary slightly from original part but functions the same
Corrosion resistant – specially coated to prevent future rust and corrosion

from

$281.99

Take a step up with a set of LUND’s Round Bent Nerf Bars. These oval nerf bars are designed to custom fit your vehicle, complementing the overall look while providing you with safe, sure footing in and out of your vehicle – no matter your shoe type. In fact, each bar has a recessed step area with UV-resistant rubber grip pads providing solid traction and stability. LUND’s Round Bent Nerf Bars feature chrome-plated or all black matte finishes and are designed with a tubular shape and curved style, creating a rugged yet contemporary look and feel. Designed and engineered to go the distance LUND’s Round Bent Nerf Bars are constructed with a cutting-edge polymer material set within a lightweight, durable aluminum frame, making these bars tough as metal and virtually corrosion-free. These bars also offer a broad stepping area designed larger than traditional step bars.

Product Features:

UV Resistant Polymer Pad
Recessed Aluminum Frame
Accents The Line Of Your Vehicle

from

$350.99

Westins Platinum 4 Oval Nerf Step Bars feature OE styling and offer an alternative look and style to traditional round tube steps. Their larger size provides strength and confidence with a full 4″ wide recessed step area. Platinum 4 Oval Nerf Step Bars ar

Product Features:

90 Degree Mandrel Bends
4 in. Wide Step Pad
4.25 in. Wide At Widest Dimension
Black Powdercoat E-Coat Mild Steel
Mount Kit Included
3 Year Limited Warranty

from

$174.99

Required part for oval tubes. Vehicle specific mount kit insures proper fit. 5 year warranty.

Product Features:

Required Part For Oval Tubes
Vehicle Specific Mount Kit Insures Proper Fit
5 Year Warranty

from

$65.99

These mounting brackets are designed for vehicle-specific application and provide solid attachment for ARIES 6″ oval side bars. They feature high-strength steel construction and a durable black powder coat finish. With a vehicle-specific design and the track mounting system of ARIES 6″ ovals, you get a custom fit for your unique truck or SUV and an easy-as-possible, no-drill installation. To verify which side bars and brackets will fit your specific vehicle, see the application information. All brackets will accommodate both finish options.

Product Features:

No-drill, vehicle-specific application for a custom fit
Compatible with 6″ oval track mounting system for easy, secure installation
Heavy-duty steel construction with a durable black powder coat finish

from

$91.99

The WeatherTech MudFlap – Laser Measured for a Perfect Fit set literally mounts-in-minutes (in most applications) without the need for wheel/tire removal, and most importantly – without the need for drilling into the vehicle fragile painted metal surface Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech MudFlap will offer undeniable vehicle protection.

Product Features:

Protects Your Vehicle s Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Vehicle s Wheels
Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
Provide Protection For Your Vehicle Most Vulnerable Rust Area
Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
Molded From A Proprietary Thermoplastic Resin
No Drilling Required And Installs In Minutes

from

$50.99

The oft overlooked mudflap. One of those protective accessories you Do not realize you need until it is too late. Rocks, sticks, and other road debris can wreak havoc on your cars finish and underside. Dee Zee Mud Flaps protect your vehicle and trailer from damage and add a classic stylistic element to your vehicle.

Product Features:

Classic Styling Of Brite-Tread Aluminum
Front Or Rear Wheel Protection
Radius Notch Contours To The Fender Well
Protected By A BriteGard Powder Coat Finish

from

$462.99

New CAPA Certified Premium Replacement Passenger Side Fender, Made Of Galvanized Steel

Product Features:

Made Of Galvanized Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$513.99

New CAPA Certified Premium Replacement Driver Side Fender

Product Features:

Made Of Galvanized Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$512.99

New Premium Replacement Rear Step Step Bumper Face Bar, Chrome

Product Features:

Chrome, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$424.99

New Economy Replacement Rear Step Bumper Face Bar, Chrome

Product Features:

Chrome, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$44.99

New Standard Replacement Front Bumper Inner Fascia Filler, For Use With Chrome Bumper, 1-Piece Design Without Tow Hooks

Product Features:

For Use With Chrome Bumper, 1-Piece Design Without Tow Hooks, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$507.99

Westin Molded Running Boards are straight board OE style designs, available in three universal lengths (72in, 79in, 93in). Universal running boards are made of an extruded aluminum base board, feature a 1-piece construction and provide step area grooves for secure footing. Available in lighted or unlighted styles. Universal running boards require a 27-series vehicle specific mounting kit, sold separately.

Product Features:

OE Style
UV Resistant Black Molded Polymer
Extruded Aluminum Base Board
Cradle Mounted Boards
Customized Mounting Brackets Sold Separately
Adds Perfect Finishing Touch To Vehicle

from

$679.99

Rb Summit Ridge 2.0 Black

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost
Pack of 3

from

$25.99

New Standard Replacement Passenger Side Fender Liner/Splash Shield, Ram 3500 Excludes Mega Cab

Product Features:

Ram 3500 Excludes Mega Cab, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$46.99

New Standard Replacement Passenger Side Fender Liner, All 02-05 1500, All 03-04 2500, RWD 05 2500/3500

Product Features:

All 02-05 1500, All 03-04 2500, RWD 05 2500/3500, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

FAQs for 2004 Dodge Ram 3500 Bodies and Fender Parts

What are the best-selling Bodies and Fender Parts for 2004 Dodge Ram 3500s?

Out of 85 Bodies and Fender Parts that fit 2004 Dodge Ram 3500s, the following parts are the top sellers:

Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum (10971893) – $50.99
Front Bumper Inner Fascia Filler, With Chrome Bumper, Without Tow Hooks (11757390) – $44.99
3 In Round Bent Steel (10575503) – $237.99

What’s the price range for 2004 Dodge Ram 3500 Bodies and Fender Parts?

The prices of Bodies and Fender Parts for the 2004 Dodge Ram 3500 range from $2.99 up to $1,030.00 for the most premium parts.

What is the average price of a Bodies and Fender Part for a 2004 Dodge Ram 3500?

The average price for Bodies and Fender Parts for the 2004 Dodge Ram 3500 is $354.67. Keep in mind the variety of part types within our Bodies and Fender Part category, where you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Bodies and Fender Parts for other Dodge Ram 3500 model years?

Yes, we carry Bodies and Fender Parts for 12 model years of Dodge Ram 3500s between 1994 and 2010. The following model years are the most popular for Bodies and Fender Part purchases: 2010, 2009, 2008, 2007, 2006, 2005, 2003, 2000, and 1998.

What are the cheapest Bodies and Fender Parts for my 2004 Dodge Ram 3500?

The cheapest 2004 Dodge Ram 3500 Bodies and Fender Parts we carry are:

One Piece Christmas Tree Design, Smooth Head, Black, Plastic, Single (50074288) – $2.99
Two Piece, 12 Millimeter, Phillips Head, Smooth, Black, Plastic, Single (50074799) – $2.99
Rivet-Screw In-Hole Diameter .250 In-Head Diameter .610 In-Length .9 In (sold by each) (21260647) – $3.29
Driver Side Front Inner Fender/Splash Shield, Ram3500, Exc Mega Cab (11834181) – $25.99
Fender Splash Shield (11833732) – $25.99

Does Advance Auto Parts sell Bodies and Fender Parts for any other 2004 Dodge models?

Yes. We stock Bodies and Fender Parts for 11 other popular 2004 Dodge models. Some of the most popular are 2004 Ram 1500 Bodies and Fender Parts, 2004 Durango Bodies and Fender Parts, 2004 Ram 2500 Bodies and Fender Parts, 2004 Dakota Bodies and Fender Parts, and 2004 Grand Caravan Bodies and Fender Parts.

What types of Bodies and Fender Parts do you sell for my 2004 Dodge Ram 3500?

As of 11/2/25, these are some of the most in-demand types of Bodies and Fender Parts for a 2004 Dodge Ram 3500:

Can I get help with 2004 Dodge Ram 3500 Bodies and Fender Part orders?

Contact our customer support team by chat or phone, through the help desk page, where you can find instant answers about Dodge Bodies and Fender Parts and more.

What is your return policy for Dodge Ram 3500 Bodies and Fender Parts?

Advance Auto Parts keeps returns simple. For new Dodge Ram 3500 Bodies and Fender Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2004 Dodge Ram 3500 Bodies and Fender Parts

KAI – Rocker Panel (Part No.RRP3179)

KAI – Roll Pan (Part No.EFXRP12)

KAI – Wheel Arch Panel (Part No.RRP1474)

Crown Auto Jeep Replacmnt – Two Piece, 12 Millimeter, Phillips Head, Smooth, Black, Plastic, Single (Part No.6502625)

KAI – Fender Liner (Part No.CH1248158C)

Auto Ventshade (AVS) – Fender Protector, Hood Protector, Smoke, High Profile, Pair (Part No.26808)

Le Bra – Front End Cover, Vinyl, Black (Part No.551514-01)

Dorman – GM Bumper Retainer (Part No.963-202D)

Lund – Sx-Sport Style 4Pc Textured (Part No.SX202T)

Energy Suspension – BodyMntBshKt (Part No.5.4115R)

KAI – Step Bumper Assembly, Chrome , Bumper/Brackets/Top Pads And Light Kit Included (Part No.CH1103111V)

Dorman – Spare Tire Hoist Assembly (Part No.924-541)

Lund – 3 In Round Bent Steel (Part No.23083781)

Westin – Platinum 4 Oval Nerf Step Bars (Part No.21-3565)

Westin – Premier Oval Nerf Step Bar Mount Kit (Part No.22-1025)

ARIES – 6 Inch Oval Side Bar Mounting Brackets (Part No.4502)

WeatherTech – Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System (Part No.110007)

Dee Zee – Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum (Part No.DZ1808TB)

KAI – Fender (Part No.CH1241269PP)

KAI – Fender (Part No.CH1240255PP)

KAI – Step Bumper Face Bar (Part No.CH1102344PP)

KAI – Step Bumper Face Bar (Part No.CH1102344V)

KAI – Front Bumper Inner Fascia Filler, With Chrome Bumper, Without Tow Hooks (Part No.CH1091101)

Westin – Molded Running Boards (Part No.27-0015)

Lund – Rb Summit Ridge 2.0 Black (Part No.28565028)

Dorman – Chrysler, Ford, GM Panel Retainer, Pack of 3 (Part No.963-058D)

KAI – Fender Splash Shield (Part No.CH1251124)

KAI – Fender Liner (Part No.CH1249125)

Dorman – Rivet-Screw In-Hole Diameter .250 In-Head Diameter .610 In-Length .9 In (sold by each) (Part No.700-864)

KAI – Driver Side Front Fender Liner (Part No.CH1248125C)

KAI – Fender Liner (Part No.CH1249125C)

KAI – Fender Liner (Part No.CH1248125)

Dee Zee – Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum (Part No.DZ1808TB)

KAI – Fender Liner (Part No.CH1249125)

KAI – Driver Side Front Inner Fender/Splash Shield, Ram3500, Exc Mega Cab (Part No.CH1250124)

KAI – Fender Splash Shield (Part No.CH1251124)

Energy Suspension – BodyMntBshKt (Part No.5.4115R)

Energy Suspension – BodyMntBshKt (Part No.5.4115G)

Energy Suspension – BodyMntBshKt (Part No.5.4116G)

Energy Suspension – BodyMntBshKt (Part No.5.4116R)