1995 Jeep Cherokee Bodies and Fender Parts

Essential 1995 Jeep Cherokee Bodies and Fender Parts

Omix – Fender (Part No.12035.04)

Fender

from

$181.99
Is your front fender rusty or dented? Omix-ADA offers high-quality replacements that will restore the original look to your Jeep. Why try to fix your old fender when you can start with a new one?

Product Features:
  • Right Side
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Rugged Ridge – FndrFlare (Part No.11634.10)

FndrFlare

from

$664.99
FndrFlare

Omix – Liftgate Weather Seal (Part No.12303.68)

Liftgate Weather Seal

from

$56.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Rubber
  • OE Style
  • Direct Fit
  • Keeps Out The Rain And The Cold
  • Limited 5 Year Warranty
See More

Dorman – Interior Panel Retai (Part No.O6125962213DOR)

Interior Panel Retai

from

$2.46
Interior Panel Retai

KAI – Body Header Panel (Part No.CH1220107V)

Body Header Panel

from

$59.99
New Economy Replacement Header Panel, Without Jeep Emblem Holes

Product Features:
  • Without Jeep Emblem Holes, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Liner (Part No.CH1249105)

Fender Liner

from

$15.99
New Standard Replacement Passenger Side Fender Liner

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Omix – Tune-Up Kit (Part No.17256.20)

Tune-Up Kit

from

$99.99
Is your Jeep running rough? Over time ignition parts will deteriorate. It’s easier to replace them now than to have a roadside breakdown in the future. Get a high quality ignition tune up kit from Omix-ADA to get your Jeep running smooth again.

Product Features:
  • Full Kit
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Rugged Ridge – Side Tube Step (Part No.11590.81)

Side Tube Step

from

$286.99
Complete the look with a set of Rugged Ridge tough duty side steps. Each side step is designed to be mounted to the frame of your Jeep creating a no-bounce secure fit. Each side step has a durable no-slip step pad that is specially mounted to the tube wit

Product Features:
  • Textured Black
  • 3 in. Round
  • No-Slip Step Pad
  • Frame Mounted
  • Limited 5 Year Warranty
See More

Dorman – Push Retainer 1/4 In. (Part No.961-075D)

Push Retainer 1/4 In.

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Push In Nylon Rivet – .250 In. (Part No.45822)

Push In Nylon Rivet - .250 In.

from

$2.29
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Rivet-Push In-Hole Diameter .250 In. (sold by each) (Part No.700-576)

Rivet-Push In-Hole Diameter .250 In. (sold by each)

from

$0.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Omix – Emblem (Part No.18676.77)

Emblem

from

$5.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Dorman – Panel Trim Retainer – Interior – GM/Chrysler/AMC (Part No.45490)

Panel Trim Retainer - Interior - GM/Chrysler/AMC

from

$1.79
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Le Bra – Front End Cover (Part No.55125-01)

Front End Cover

from

$157.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
  • Protect against rock chips, bugs and road tar
  • Soft inner layer
See More

Le Bra – Front End Cover (Part No.55258-01)

Front End Cover

from

$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
  • Protect against rock chips, bugs and road tar
  • Soft inner layer
See More

Omix – Bump Stop (Part No.18280.18)

Bump Stop

from

$23.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Rubber
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – U-Nut; M8-1.25;Spare (Part No.11811.91)

U-Nut; M8-1.25;Spare

from

$4.99
U-Nut; M8-1.25;Spare

Dorman – Rivet-Push In-Hole Diameter .250 In. (Part No.45612)

Rivet-Push In-Hole Diameter .250 In.

from

$2.29
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Chrysler, GM Panel Retainer (Part No.963-056D)

Chrysler, GM Panel Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Crown Auto Jeep Replacmnt – Used On Floor Drain, Black, Metal/ Rubber (Part No.55360966AA)

Used On Floor Drain, Black, Metal/ Rubber

from

$5.99
Crown Automotive offers the largest line of Body replacement parts for Dodge and Jeep(R). Our applications Comes with Fender, Hood, Windshield, Grille, Tailgate, Bumpers, Door and Window for all Dodge and Jeep(R) models.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

Crown Auto Jeep Replacmnt – 1 Inch Diameter, Rubber, Single (Part No.J4000334)

1 Inch Diameter, Rubber, Single

from

$4.29
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

Omix – Floor Pan Plug (Part No.12031.05)

Floor Pan Plug

from

$11.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Steel
  • OE Style
  • Direct Fit
  • Single
  • Limited 5 Year Warranty
See More

Omix – Plug; Floor; 6.3mm H (Part No.12033.15)

Plug; Floor; 6.3mm H

from

$6.79
Plug; Floor; 6.3mm H

Dee Zee – 11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On (Part No.DZ1808)

11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On

from

$39.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.

Product Features:
  • Protect Your Vehicle And Trailer From Rocks And Messy Conditions
  • Classic Diamond Style Design
  • Protected By A BriteGard Powder Coat Finish
  • Compliment Brite-Tread Running Boards
See More

WeatherTech – Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System (Part No.120095)

Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System

from

$146.99
Laser Measured MudFlaps are custom fit and protect your vehicle s fenders and exterior from rocks, mud, road grime and other debris picked up by your vehicle s wheels. No drilling required and installs in Minutes.

Product Features:
  • Contoured Specifically For Each Application And Molded From A Proprietary Thermoplastic Resin
  • MudFlap Will Offers Undeniable Vehicle Protection
  • Features The Patented QuickTurn Hardened Stainless Steel Fastening System
  • Provides Protection For Your Vehicle Most Vulnerable Areas: Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
  • Laser Measured For A Perfect Fit Set Literally Mounts-In-Minutes (In Most Applications) Without The Need For Wheel Or Tire Removal
  • Most Importantly -Mounts Without The Need For Drilling Into The Vehicle Fragile Painted Metal Surface
See More

WeatherTech – Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System (Part No.120064)

Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System

from

$146.99
The WeatherTech MudFlap Laser Measured for a Perfect Fit set literally mounts in minutes without the need for wheel or tire removal, and most importantly without the need for drilling into the vehicles fragile painted metal surface. Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech MudFlap will offer undeniable vehicle protection. Featuring the patented QuickTurn hardened stainless steel fastening system. WeatherTech MudFlaps provide protection for your vehicles most vulnerable rust area protecting the fender and rocker panel from stone chips, slush, dirt and debris.

Product Features:
  • Laser Measured To Custom Fit And Protect Your Vehicle s Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Your Vehicle s Wheels
  • Molded From A Proprietary Thermoplastic Resin, Offers Undeniable Vehicle Protection
  • Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
  • No Drilling Required And Installs In Minutes
See More

WeatherTech – Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System (Part No.110064)

Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System

from

$146.99
The WeatherTech MudFlap Laser Measured for a Perfect Fit set literally mounts in minutes without the need for wheel or tire removal, and most importantly without the need for drilling into the vehicles fragile painted metal surface. Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech MudFlap will offer undeniable vehicle protection. Featuring the patented QuickTurn hardened stainless steel fastening system. WeatherTech MudFlaps provide protection for your vehicles most vulnerable rust area protecting the fender and rocker panel from stone chips, slush, dirt and debris.

Product Features:
  • Laser Measured To Custom Fit And Protect Your Vehicle Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Your Vehicle Wheels
  • Molded From A Proprietary Thermoplastic Resin, Offers Undeniable Vehicle Protection
  • Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
  • No Drilling Required And Installs In Minutes
See More

Dee Zee – Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material (Part No.DZ17939)

Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material

from

$28.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.

Product Features:
  • Protect Your Vehicle And Trailer From Rocks And Messy Conditions
  • Universal Fitting
  • Easy No Drill Installation
  • Perfect Compliment Nerf Bars
See More

1995 Jeep Cherokee Bodies and Fender Parts

Maybe you’re in the middle of a full rebuild of that 1995 Jeep Cherokee. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 28 different Bodies and Fender Parts in our inventory ranging from $0.99 to $664.99. That means you can find the exact parts or products you need to keep that 1995 Jeep Cherokee running smoothly.

Bodies and Fender Parts are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1995 Jeep Cherokee. Dorman, Dee Zee, and Omix are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Bodies and Fender Parts for your 1995 Jeep Cherokee, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 1995 Jeep Cherokee rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Bodies and Fender Parts Brands To Make Your 1995 Jeep Cherokee Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1995 Jeep Cherokee demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Cherokee the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.

Popular Dorman Bodies and Fender Parts

We carry Dorman parts in our stock across Quarter Panel Extension Retainers and Rocker Panel Molding Retainers categories, plus more. For a 1995 Jeep Cherokee, our most popular Dorman Bodies and Fender Parts include:
Push In Nylon Rivet - .250 In.
from $2.29
(2)
Push In Nylon Rivet – .250 In.
Quarter Panel Extension Retainers
Panel Trim Retainer - Interior - GM/Chrysler/AMC
from $1.79
(1)
Panel Trim Retainer – Interior – GM/Chrysler/AMC
Rocker Panel Molding Retainers

FAQs for 1995 Jeep Cherokee Bodies and Fender Parts

What are the most purchased Bodies and Fender Parts for the 1995 Jeep Cherokee?

Out of 28 Bodies and Fender Parts for the 1995 Jeep Cherokee, the most popular in our inventory are:
Chrysler, GM Panel Retainer
from $4.49
This product is not rated
Chrysler, GM Panel Retainer
Splash Shield Retainers
Push Retainer 1/4 In.
from $4.49
This product is not rated
Push Retainer 1/4 In.
Quarter Panel Extension Retainers