1995 Ford E-350 Econoline Transmission Parts

Below you will find various in-demand Ford Transmission Parts, components and accessories for your 1995 E-350 Econoline. Advance Auto Parts has popular E-350 Econoline parts like Transmission Mounts, Transmission Bearings, Transmission Seals and more. You’ll also find aftermarket and OEM Transmission Parts for other E-350 Econoline model years including 1991, 1992, 1993, 1994, 1996, 1997, 1998, 1999, 2004 and more. Select a category of 1995 Ford E-350 Econoline Transmission Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1995 Ford E-350 Econoline Transmission Parts Categories

Automatic Transmission Shift Tubes

Gear Shift Levers

Automatic Transmission Shift Linkage Bushings

Transmission Torque Converters

OE Transmission Coolers

Transfer Shaft Bearing

Transmission Solenoids

Transmission Oil Cooler Lines

Transmission Shift Cables

Countershaft Bearings

Manual Transmission Output Shaft Bearings

Transmission Pan Gaskets

Transmission Oil Cooler Fittings

Automatic Transmission Line Connectors

Transmission Mounts

Transmission Oil Pans

Transmission Master Repair Kits

Transmission Rebuild Kits

Transmission Oil Pan Gaskets

Speed Sensors

Automatic Transmission Shift Tube Lever Pins

Automatic Transmission Differential Bearings

Transmission Speed Sensors

Transmission Bushings

Automatic Transmission Control Shaft Seals

Main Shaft Bearings

Automatic Transmission Oil Pump Seals

Transmission Modulator Valves

Pinion Seals

Neutral Safety Switch Connectors

Transmission Seals and O-rings

Extension Housing Seals

Manual Transmission Output Shaft Seals

Transmission Shift Kits

Input Shaft Bearings

Back Up Lamp Connectors

Automatic Transmission Flexplate Mounting Bolts

Automatic Transmission Fluid Filler Tube Seals

Remanufactured Automatic Transmissions

Automatic Transmission Shift Tube Bushings

Automatic Transmission Overdrive Button Kit

Automatic Transmission Output Speed Sensor Seal

Essential Transmission Parts for 1995 Ford E-350 Econolines

from

$51.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$79.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$24.49

This automatic transmission shift indicator cable bracket is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this automatic transmission shift indicator cable bracket matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bracket is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$6.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$17.99

A/T FLYWHEEL BOLT

from

$19.99

This automatic transmission overdrive button kit matches the original parts to repair a missing or damaged overdrive button on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this automatic transmission overdrive button kit is designed to match the original components required to repair a missing or damaged overdrive button on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that are missing, damaged or failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$159.99

AT SHIFT KIT

from

$51.99

AT MODULATOR VALVE

from

$2.99

AT DPSTK TUBE SEAL

from

$82.99

AUTOMATIC TRANS PART

from

$15.99

Anchor 2448 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1968-1991
Weight approx: 3 Lbs
Mount Holes On Center: 5.56 In./141.22 mm
Studs On Center: 2.71 Inch/68.83 Mm
Height: 2.04 Inch/51.82 Mm
Mount Holes: 0.53 X 0.73 Inch/13.5 X 18.54 Mm
Stud Thread: 7/16 – 14 X 1.25

from

$11.99

Manufactured with premium materials, National needle bearings are designed and engineered to meet OE specifications.

Product Features:

RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$13.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today¿s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 deg. F to 400 deg. F / -40 deg. C to 204 deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$756.99

AT MASTER REPAIR KIT

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$399.99

Add fluid capacity to your transmission. Extra fluid means more cooling, and more cooling means better efficiency and performance. Add life to your transmission with a B&M Deep Pan!

Product Features:

Additional Oil Capacity
More Cooling Ability
No Dipstick Modification
Some Include Fluid Pickup Extension
Built-In Drain Plugs
Cast Aluminum

from

$9.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$99.99

This automatic transmission shift tube is designed to match the fit and function of the original tube on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this automatic transmission shift tube is designed to match the fit and function of the original tube on specified applications
Restores functionality – this tube is made to fit and fully restore part functionality after the original tube fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$16.49

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$2319.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$6.99

This automatic transmission shift tube lever pin is designed to match the fit and function of the original pin on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this automatic transmission shift tube lever pin is designed to match the fit and function of the original pin on specified vehicles
Restores functionality – this pin is made to fit and fully restore part functionality after the original pin fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$12.99

AT OIL PUMP SEAL

from

$13.79

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$26.49

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$399.99

Additional Oil Capacity
More Cooling Ability
No Dipstick Modification
Some Include Fluid Pickup Extension
Built-In Drain Plugs
Cast Aluminum

from

$4.29

AT SOLENOID SEAL

from

$27.49

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

Upgrade your 1995 Ford E-350 Econoline with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 1995 Ford E-350 Econoline, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Transmission Parts are key to keeping your E-350 Econoline functioning at its best. At Advance Auto Parts, we offer a wide selection of 120 Transmission Parts for the 1995 Ford E-350 Econoline, designed to meet your needs without breaking the bank. From Transmission Mount replacements to Transmission Bearings upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1995 Ford E-350 Econoline at great prices. Our Transmission Parts inventory for this model ranges from just $1.99 to $2,599.99, with an average price of $175.81. Our 120 Transmission Parts in stock come from 20 trusted brands, so you’re sure to find the right part for your 1995 Ford E-350 Econoline without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1995 Ford E-350 Econoline, we stock popular OEM and aftermarket Transmission Parts from top names like Driveworks, Dorman, Imperial, and more. Driveworks Transmission Parts start at just $10.99 and boast an impressive 4.2 stars average rating from customers. Dorman and Imperial also bring quality to the table, with Transmission Parts available starting at $6.99, and at an average 4.2 stars rating. With 5,444 customer reviews and counting, our 1995 Ford E-350 Econoline Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1995 Ford E-350 Econoline is always ready to roll. We’re committed to providing you with everything you need to keep your E-350 Econoline in top shape, all in one place. Start shopping confidently below for your 1995 Ford E-350 Econoline!

Best-Selling Transmission Mounts for 1995 Ford E-350 Econolines

Enhance the driving experience in your Ford with 1 quality Transmission Mount components, starting at $27.99.

show more show less

from

$27.99

Anchor 2557 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1987-2022
Weight approx: 4 Lbs
Mount Holes On Center: 5.5 In. /139.7 mm
Studs On Center: 2.70 Inch/68.58 Mm
Height: 2.7 Inch/68.58 Mm
Studs And Mount Offset: 0.25 Inch/6.1 Mm

Most Popular 1995 Ford E-350 Econoline Transmission Bearings

Customize your Ford with 7 Transmission Bearings products like Countershaft Bearings, Automatic Transmission Differential Bearings, and Manual Transmission Output Shaft Bearings, all priced under $26.49.

show more show less

from

$13.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$13.79

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$9.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$24.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$6.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$26.49

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$16.49

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Top Picks for 1995 Ford E-350 Econoline Transmission Seals

Upgrade Ford E-350 Econolines with top-quality Transmission Seals parts, including 14 OEM and aftermarket selections for your 1995 model.

show more show less

from

$10.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$10.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$17.79

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$26.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$12.99

Design type: spring loaded; single-lip
Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
Good dry heat resistance
Excellent low temperature capability
Delivers quality and reliable performance for every type of repair

from

$19.99

Design type: spring loaded; single-lip
Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
Good dry heat resistance
Excellent low temperature capability
Delivers quality and reliable performance for every type of repair

from

$7.49

AT CONTR SHAFT SEAL

from

$7.29

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$2.99

AT DPSTK TUBE SEAL

from

$11.99

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$14.29

AT EXT HOUSING SEAL

from

$27.49

from

$18.49

AT EXT HOUSING SEAL

from

$12.99

AT OIL PUMP SEAL

In-Demand Automatic Transmission Parts for 1995 Ford E-350 Econolines

Select from 27 premium Automatic Transmission Parts parts for your 1995 Ford E-350 Econoline, with prices ranging from $1.99 to $2,599.99.

show more show less

from

$7.99

This automatic transmission shift tube bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this automatic transmission shift tube bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$22.99

This automatic transmission shift tube clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this automatic transmission shift tube clamp is designed to match the fit and function of the original clamp
Restores functionality – this clamp is made to fit and fully restore part functionality after the original clamp fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$6.99

Direct replacement – this automatic transmission shift tube lever pin is designed to match the fit and function of the original pin on specified vehicles
Restores functionality – this pin is made to fit and fully restore part functionality after the original pin fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.49

AT SHF LINK BUSHING

from

$4.29

AT SOLENOID SEAL

from

$40.99

Fully adjustable vacuum modulator to maintain accurate shift points.

Product Features:

Meets or exceeds OE specifications

from

$2599.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$43.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and function.

Product Features:

Meets or exceeds OE specifications
Plug-in connector

from

$31.99

Direct replacement – this automatic transmission shift tube is designed to match the fit and function of the original tube on specified applications
Restores functionality – this tube is made to fit and fully restore part functionality after the original tube fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$179.99

Remanufactured to meet or exceed OE quality, with inherent OE flaws corrected to improve longevity and performance.

Product Features:

Meets or exceeds OE specifications
All blocks are serialized

from

$51.99

AT MODULATOR VALVE

from

$38.99

Fully adjustable vacuum modulator to maintain accurate shift points.

Product Features:

Meets or exceeds OE specifications

from

$2597.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2509.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2474.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2319.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road; We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions; Each Moveras transmission is produced in a World Class manufacturing facility; Our entire process has been developed from scratch, utilizing LEAN manufacturing principles; Our transmissions are produced in a Clean Room environment; Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$2319.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2286.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2286.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$1929.99

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$1929.99

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$1929.99

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$80.99

AT BUSHING KIT

from

$52.99

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

Most Sold 1995 Ford E-350 Econoline Transmission Cooler and Parts

Explore our best-selling Ford parts for the 1995 E-350 Econoline among 12 OEM and aftermarket options starting from $11.99.

show more show less

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$85.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 30,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
33% more efficient than a comparable tube and fin design

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$79.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$60.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$151.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 1-1/2″ x 12″ x 15 1/8″
Severe-duty transmission oil cooling applications
Towing with class “A” motor home or towing more than 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

Top-Rated Transmission Parts Brands For Your 1995 Ford E-350 Econoline

Shop for the best-rated brands offering Transmission Parts and other products for your 1995 Ford E-350 Econolines. Below you’ll find some of our best rated Transmission Parts from Driveworks, Dorman, and Imperial, and more. Transmission Parts from these brands that fit a 1995 E-350 Econoline start at just $6.99 and are rated as high as 4.2 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Driveworks 1995 Ford E-350 Econoline Transmission Parts

When it comes to maintaining or upgrading your 1995 Ford E-350 Econoline, using quality Transmission Parts is essential to ensure durability and a perfect fit. Driveworks ticks all of those boxes. We offer a wide selection of Driveworks Transmission Parts, specifically designed for the 1995 Ford E-350 Econoline. With over 3 Driveworks brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $10.99, with an average price of just $11.99. Plus, with over 13 customer reviews and an average rating of 4.2 stars, you can trust that our Driveworks Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $10.99

(8)

Oil Seal

“Nice price 👍 perfect fit 👌”

from $13.99

(3)

Tapered Cone Wheel Bearing Assembly

“This appears to be a well made bearing that fit perfectly.”

from $10.99

(2)

Oil Seal

“Doing good so far no leaks. Good price !”

Popular Dorman 1995 Ford E-350 Econoline Transmission Parts

Dorman auto parts is one of the highest quality Transmission Part brands in the market. Any 1995 Ford E-350 Econoline owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1995 E-350 Econoline, Advance Auto Parts carries a full inventory of 3 Dorman Transmission Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Dorman Transmission Parts range from $6.99 to $22.99, plus, with more than 24 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $6.99

(3)

Shift Tube Lever Pin

“Fit right and the rubber piece holds it in place like it should. The rubber on my old one was no longer flexible enough or had worn down so it no long”

from $7.99

(17)

Steering Column Shift Tube Bushing, 2 Piece

“Take your time. It works, Just be patient.”

from $22.99

(4)

Shift Clamp And Bushing

“For a Dorman part, it was actually pretty good.”

FAQs for 1995 Ford E-350 Econoline Transmission Parts

Which Transmission Parts are best-sellers for 1995 Ford E-350 Econolines?

Out of 120 Transmission Parts that fit 1995 Ford E-350 Econolines, the following parts are the top sellers:

Steering Column Shift Tube Bushing, 2 Piece (10478045) – $7.99
Shift Clamp And Bushing (10488362) – $22.99
Bearings (3272400) – $9.99

What’s the price range for 1995 Ford E-350 Econoline Transmission Parts?

Transmission Part prices for the 1995 Ford E-350 Econoline start at $1.99 and go up to $2,599.99 for the most premium parts.

What’s the average price of a Transmission Part for a 1995 Ford E-350 Econoline?

The average price for Transmission Parts for the 1995 Ford E-350 Econoline is $175.81. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Ford E-350 Econoline model years?

Yes, we currently carry Transmission Parts for 24 model years of Ford E-350 Econolines between 1975 and 2004. Transmission Parts are bought most frequently for the following model years: 2004, 1999, 1998, 1997, 1996, 1994, 1993, 1992, and 1991.

What are the cheapest Transmission Parts for my 1995 Ford E-350 Econoline?

The cheapest 1995 Ford E-350 Econoline Transmission Parts we carry in stock are:

Steering Column Shift Tube Bushing Kit (Sold by each) (10958135) – $1.99
AT DPSTK TUBE SEAL (11236112) – $2.99
AT SOLENOID SEAL (11239035) – $4.29
Shift Lever Pin Assembly (50247693) – $5.99
Automatic Transmission Shift Tube Bushing (12541334) – $6.49

What are the top-rated Transmission Parts that fit the 1995 Ford E-350 Econoline?

Out of 5,444 reviews by customers, our 1995 Ford E-350 Econoline Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1995 Ford E-350 Econoline and their top-rated products:

Transmission Connectors
- Transmission Line Connector with 5/16 In. Tube X 1/4-18 In. Thread (16140087) – $7.99
- Transmission Line Fitting Kit (3670009) – $9.99
Automatic Transmission Pan and Gaskets
- Transmission Line Connector with 5/16 In. Tube X 1/4-18 In. Thread (16140087) – $7.99
- Transmission Line Fitting Kit (3670009) – $9.99

What types of Transmission Parts do you sell for my 1995 Ford E-350 Econoline?

As of 3/1/26, these are some of the most in-demand types of Transmission Parts for a 1995 Ford E-350 Econoline:

Can I get help with 1995 Ford E-350 Econoline Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Transmission Parts and more.

What is your return policy for Ford E-350 Econoline Transmission Parts?

Advance Auto Parts keeps returns simple. For new Ford E-350 Econoline Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1995 Ford E-350 Econoline Transmission Parts

Carquest Premium – Multi-Use Connector (Part No.PTA1352)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Dorman – Help – Shift Indicator Bracket (Part No.83244)

Driveworks – Oil Seal (Part No.S-7692S)

ATP – A/T FLYWHEEL BOLT (Part No.ZX-1016)

Dorman – Help – Overdrive Shift Button and Cap (Part No.49299)

ATP – AT SHIFT KIT (Part No.FK-8)

ATP – AT MODULATOR VALVE (Part No.FX-194)

ATP – AT DPSTK TUBE SEAL (Part No.SO-33)

ATP – AUTOMATIC TRANS PART (Part No.FGS-110)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2448)

National – Multi-Purpose Bearing (Part No.FA-35688)

National – Multi Purpose Seal (Part No.4765)

ATP – AT MASTER REPAIR KIT (Part No.FM-40)

Imperial – Mounting Kit System (Part No.226201)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

B & M – Cast Deep Transmission Deep For Ford, E4OD, 5R100, 4R100 (Part No.40295)

Felpro – Transmission Oil Pan Gasket 14 Bolt Hole One Piece Gasket (Part No.TOS 18706)

Dorman – Auto Trans Shift Tube (Part No.905-108)

Schaeffler – Cup (Part No.M802011)

Shift Pro by ETE – E4OD Automatic Transmission Assembly (Part No.T162112)

Dorman – Shift Tube Lever Pin (Part No.924-440)

ATP – AT OIL PUMP SEAL (Part No.FO-191)

Driveworks – Taper Bearing Cone (Part No.S-387-A)

National – Bearing Race (Part No.28521)

B & M – Cast Deep Transmission Pan For AOD/AODE/ and 4R70W Transmission (Part No.40291)

ATP – AT SOLENOID SEAL (Part No.JO-15)

Motive Gear – Differential Pinion Seal (Part No.4525V)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2557)

Driveworks – Tapered Cone Wheel Bearing Assembly (Part No.S-15101)

Driveworks – Taper Bearing Cone (Part No.S-387-A)

National – Bearings (Part No.15245)

National – Tapered Roller Bearing Cone (Part No.387A)

Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)

National – Bearing Race (Part No.28521)

Schaeffler – Cup (Part No.M802011)

Driveworks – Oil Seal (Part No.S-7300S)

Driveworks – Oil Seal (Part No.S-3404)

National – Multi Purpose Seal (Part No.7300S)

National – Automatic Transmission Extension Housing Seal Kit (Part No.5203)

National – Multi-Purpose Seal (Part No.331107N)

National – Multi-Purpose Seal (Part No.3404)

ATP – AT CONTR SHAFT SEAL (Part No.FO-15)

National – Multi-Purpose Seal (Part No.7929S)

ATP – AT DPSTK TUBE SEAL (Part No.SO-33)

National – Multi Purpose Seal (Part No.225010)

ATP – AT EXT HOUSING SEAL (Part No.HO-8)

Motive Gear – Differential Pinion Seal (Part No.4525V)

ATP – AT EXT HOUSING SEAL (Part No.FO-199)

ATP – AT OIL PUMP SEAL (Part No.FO-191)

Dorman – Steering Column Shift Tube Bushing, 2 Piece (Part No.905-107)

Dorman – Shift Clamp And Bushing (Part No.905-110)

Dorman – Shift Tube Lever Pin (Part No.924-440)

ATP – AT SHF LINK BUSHING (Part No.FO-405)

ATP – AT SOLENOID SEAL (Part No.JO-15)

Pro-King – Automatic Transmission Vacuum Modulator (Part No.MD-23)

Shift Pro by ETE – E4OD Automatic Transmission Assembly (Part No.T162139)

Pro-King – Automatic Transmission Solenoid (Part No.52-0212)

Dorman – Shift Tube Lever Plunger Shaft (Part No.905-555)

Pro-King – Remanufactured Transmission Solenoid Block (Part No.RTS101)

ATP – AT MODULATOR VALVE (Part No.FX-194)

Pro-King – Automatic Transmission Vacuum Modulator (Part No.MD-36)

Shift Pro by ETE – E4OD Automatic Transmission Assembly (Part No.T162135)

Shift Pro by ETE – E4OD Automatic Transmission Assembly (Part No.T162118)

Shift Pro by ETE – E4OD Automatic Transmission Assembly (Part No.T162137)

Moveras – M00812 Remanufactured E4OD Automatic Transmission Assembly (Part No.M00812)

Shift Pro by ETE – E4OD Automatic Transmission Assembly (Part No.T162112)

Shift Pro by ETE – E4OD Automatic Transmission Assembly (Part No.T162138)

Shift Pro by ETE – E4OD Automatic Transmission Assembly (Part No.T162136)

Moveras – M00234 Remanufactured E4OD Automatic Transmission Assembly (Part No.M00234)

Moveras – M00237 Remanufactured E4OD Automatic Transmission Assembly (Part No.M00237)

Moveras – M00237AB Remanufactured E4OD Automatic Transmission Assembly (Part No.M00237AB)

ATP – AT BUSHING KIT (Part No.FBS-2)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.SBA4976)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243007)

Imperial – Mounting Kit System (Part No.226201)

Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243012)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.241018)