1995 Eagle Talon Steering and Chassis Parts

Essential 1995 Eagle Talon Steering and Chassis Parts

Driveworks – Camber Bolt Kit (Part No.DW-K9757)

Camber Bolt Kit

from

$24.99
Driveworks Brand Camber Cam Bolt Kit is mainly used for car chassis suspension system

Product Features:
  • Meets or exceeds OE performance specifications
  • Precision engineered for improved ride and superior performance
  • Performance tested to ensure durability
See More

Powercraft – Rack Pinion Seal Kit (Part No.8655)

Rack Pinion Seal Kit

from

$99.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – Return Tube Assembly (Part No.40362)

Return Tube Assembly

from

$45.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:
  • Zinc coated tubes protect against rust and corrosion
See More

Driveworks – Sway Bar Link Kit (Part No.DW-K80186)

Sway Bar Link Kit

from

$33.49
Sway Bar Link Kit

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

MOOG – Steering Tie Rod End (Part No.EV350)

Steering Tie Rod End

from

$65.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Assembled in the USA
See More

EMPI – Steering Rack Boot Kit (Part No.M1030160276EMP)

Steering Rack Boot Kit

from

$19.40
Steering Rack Boot Kit

Driveworks – Bellow Kits (Part No.DW-K9358)

Bellow Kits

from

$13.99
Driveworks Brand Bellow kits are made to OE specifications. They work with the steering tie rod end, preventing the entering of dust and prolonging the useful life of the inner parts. Driveworks Brand chassis parts help ensure improved steering response a

Product Features:
  • Designed to meet or exceeds OE performance specifications
  • Durable neoprene rubber
See More

Driveworks – Suspension Ball Joint (Part No.DW-K90264)

Suspension Ball Joint

from

$40.49
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Forged housing provides exceptional strength and durability
  • Oxidation film on the surface of the metal protects against corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
See More

Rare Parts – Ball Joint (Part No.RP10638)

Ball Joint

from

$38.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

Carquest Premium – Pressure Tube Assembly (Part No.37772)

Pressure Tube Assembly

from

$60.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Zinc coated tubes protect against rust and corrosion
See More

Imperial – Quick Connect Coupler (Part No.240250)

Quick Connect Coupler

from

$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:
  • Quick Connect coupler
  • Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
  • Simplifies transmission cooler installation
  • Allows for auxiliary transmission cooler installation without cutting OE lines
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)

Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)

from

$7.79
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)

Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.35002)

Bulk - 3/8" I.D. Return Hose J189

from

$46.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

CTR – Sway Bar Link (Part No.L1030298062CTR)

Sway Bar Link

from

$20.27
The CTR Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Energy Suspension – Sway Bar Bushing Set (Part No.5.5108R)

Sway Bar Bushing Set

from

$29.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Cardone – Power Steering Filter (Part No.20-0012F)

Power Steering Filter

from

$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Driveworks – Suspension Ball Joint Kit (Part No.DW-K7452)

Suspension Ball Joint Kit

from

$33.49
Suspension Ball Joint Kit

Driveworks – Suspension Ball Joint (Part No.DW-K9617)

Suspension Ball Joint

from

$6.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Forged housing provides exceptional strength and durability
  • Oxidation film on the surface of the metal protects against corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
See More

Cardone – Power Steering Pump (Part No.21-5241)

Power Steering Pump

from

$129.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Cardone – Power Steering Pump (Part No.21-5934)

Power Steering Pump

from

$403.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Powercraft – Pump Seal Kit (Part No.8721)

Pump Seal Kit

from

$45.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Pump Seal Kit (Part No.8722)

Pump Seal Kit

from

$33.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.RK90265)

Suspension Control Arm and Ball Joint Assembly

from

$57.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

Dorman – Suspension Control Arm (Part No.520-548)

Suspension Control Arm

from

$61.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Cardone – Rack and Pinion Assembly (Part No.26-2109)

Rack and Pinion Assembly

from

$235.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Cardone – Rack and Pinion Assembly (Part No.26-2105)

Rack and Pinion Assembly

from

$247.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

1995 Eagle Talon Steering and Chassis Parts

You count on your 1995 Eagle Talon to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 64 Steering and Chassis Parts ranging in price from $2.99 to $403.99, you’re sure to find everything you need for your 1995 Eagle Talon.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 17 different brands like Imperial, Carquest Premium, and Cardone. 1995 Eagle Talon Steering and Chassis Parts start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 642 extensive product reviews on 1995 Eagle Talon Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Tie Rod End with 3.5 stars and Tie Rod End with 4.6 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1995 Eagle Talon below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 1995 Eagle Talon

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1995 Eagle Talon running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, Cardone, and even more.

Popular Carquest Premium Steering and Chassis Parts

You’ll find popular Carquest Premium brand products across Power Steering Parts. All are waiting to get your 1995 Eagle Talon back on the road. Some of the top-rated Carquest Premium products in these categories are:
Pressure Hose Assembly
from $25.49
(1)
Pressure Hose Assembly
Power Steering Pressure Hoses
Bulk - 3/8" I.D. Return Hose J189
from $39.99
(1)
Bulk – 3/8" I.D. Return Hose J189
Power Steering Return Hoses
Bulk - 3/8" I.D. Return Hose J189
from $46.49
(17)
Bulk – 3/8" I.D. Return Hose J189
Power Steering Reservoir Hoses

Top-Rated Imperial Steering and Chassis Parts


If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1995 Eagle Talon, and some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for 1995 Eagle Talon Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 1995 Eagle Talon?

Out of 64 Steering and Chassis Parts for the 1995 Eagle Talon, the most popular in our inventory are:
Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)
from $7.79
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Bulk - 3/8" ID Return Hose (CPE) (sold by each)
from $2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses

What are the top-rated 1995 Eagle Talon Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 1995 Eagle Talon based on customer reviews/ratings are:
Tie Rod End
from $26.99
(10)
Tie Rod End
“Easy to get to store.”
Tie Rod End
from $52.99
(5)
Tie Rod End
“Bought the driver and passenger side of this Tie Rod end from Moog. On my 98 Sebring there are no grease fittings from the factory, which is one of th”
Transmission Oil Cooler Reinstallation Kit
from $20.79
(4)
Transmission Oil Cooler Reinstallation Kit
“They did not actually ahve teh kit when i got this so the erverice rep just made teh order up from bits off the shelf. The clips and hose was all the ”