Eagle Talon Parts

Eagle Talon Body Parts

from

$10.99

New Standard Replacement Driver Side Fender Liner/Splash Shield, Without Turbo

Product Features:

Without Turbo, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$10.99

New Standard Replacement Passenger Side Fender Liner/Splash Shield, Without Turbo

Product Features:

Without Turbo, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$25.99

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

Engineered to meet or exceed OE specifications. Always replace in Pairs, where applicable.
Easy Install – Less than 15 Minutes! based on average install time across all parts
No Special Tools Required
Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance.
OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function.
OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable.
World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal.
Trilingual Install Instructions provided inside each package

from

$37.99

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal

from

$29.99

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal

from

$23.49

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$41.99

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$84.99

This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
Reliable design – engineered in North America and backed by long history of automotive aftermarket experience

from

$24.99

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$39.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$32.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$29.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$29.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$59.99

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

Eagle Talon Transmission Parts

from

$9.99

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$11.99

AT SHF LINK BUSHING

from

$46.99

Manufactured with premium materials, National taper bearing assemblies are designed and engineered to meet OE specifications.

Product Features:

CONSISTENT PERFORMANCE – Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS – Precision manufactured using high-quality materials for durability and performance
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$8.99

AT SOLENOID GASKET

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$16.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$3.99

AT SOLENOID SEAL

from

$12.99

AT TORQUE CONVT SEAL

from

$24.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Back Up Light Switch automatically activates the rear backup lights when the vehicle is shifted into reverse. This improved visibility for the driver and alerts other vehicles or pedestrians when the vehicle is reversing, reducing the risk of accidents. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$37.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to EAGLE 90-94; MITS 90-94; PLYM 90-94;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1990-1994
Weight approx: 4 Lbs

from

$11.99

AT SEAL DRIVE AXLE

from

$24.79

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

CONSISTENT PERFORMANCE — Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS — Precision manufactured using high-quality materials for durability and performance
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$5.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$11.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$17.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$4.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$22.79

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$16.49

Product Features:

Brand may vary by location

from

$48.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using high-quality materials for durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$5.79

Product Features:

Brand may vary by location

from

$167.99

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features:

Fluid Balanced

from

$15.49

We develop and produce high-quality roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$14.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$178.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$196.99

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

Eagle Talon Clutch Systems

from

$28.49

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$28.49

from

$31.49

from

$53.99

CLUTCH CABLE

from

$40.99

Clutch cables connect the clutch pedal to the transmission shift fork. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Clutch cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Includes brackets, grommets, etc to match original
Returns clutch petal feel to normal
Allows proper clutch engagement

from

$43.99

from

$41.99

from

$53.99

from

$21.99

Engineered from high-quality materials to ensure chemical and thermal resistance, our Clutch Hydraulic Hose restores and maintains optimal clutch performance.

Product Features:

Direct replacement for a proper fit every time
Integral brackets included for ease of installation (where applicable)
Clutch hoses with banjo-end fittings come with new copper washers for a tight seal
All our Clutch Hydraulic Hoses are tested up to 4,000 PSI to ensure product safety standards are met
Brand may vary by location

from

$18.99

FLYWHEEL SHIM

from

$26.99

FLYWHEEL SHIM

from

$103.99

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet® clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$217.99

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$121.99

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$164.99

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$111.99

Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:

Balanced to factory specs
Fit and function like the original parts
Restores normal operation

from

$26.99

AT FLEX PLATE

from

$33.99

Product Features:

Brand may vary by location

from

$37.99

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$39.49

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Eagle Talon Automotive Accessories

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive
Backed By A Limited Lifetime Warranty

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For A Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For A Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$159.99

Lightweight & thin, the special edition indoor stretch car cover from Budge is perfect for luxurious indoor protection against dust and air-borne pollutants. Silky to the touch with a soft fleece lining this vehicle cover stretches and conforms to the curves of your vehicle for a custom-like fit. This indoor car cover is ideal for long-term vehicle storage and garage kept vehicles. The thickness of the auto cover helps keep out dust and other indoor environmental hazards. The indoor stretch material is completely nonabrasive and will not scratch your vehicles surface. This cover is available in red, silver or black. A storage bag included for when not protecting your vehicle. Our covers are available in a variety of sizes that will popular car makes and models. This car cover fits cars 170″ L x 60″ W x 48″ H.

Product Features:

This car cover fits cars 170″ L x 60″ W x 48″ H.
This indoor vehicle cover is made from a stretchable material conforms to you car
Extremely soft fleece lining to protect your car from scratches
This auto cover is suitable for indoor use or for garage kept vehicles
Available in black, silver & red colors

from

$159.99

Lightweight & thin, the special edition indoor stretch car cover from Budge is perfect for luxurious indoor protection against dust & air-borne pollutants. Silky to the touch with a soft fleece lining this vehicle cover stretches and conforms to the curves of your vehicle for a custom-like fit. This indoor car cover is ideal for long-term vehicle storage and garage kept vehicles. The thickness of the auto cover helps keep out dust and other indoor environmental hazards. The indoor stretch material is completely nonabrasive and will not scratch your vehicles surface. This cover is available in red, silver or black. A storage bag included for when not protecting your vehicle. Our covers are available in a variety of sizes that will popular car makes and models. This car cover fits cars 170″ L x 60″ W x 48″ H.

Product Features:

This car cover fits cars 170″ L x 60″ W x 48″ H.
This indoor vehicle cover is made from a stretchable material conforms to you car
Extremely soft fleece lining to protect your car from scratches
This auto cover is suitable for indoor use or for garage kept vehicles
Available in black, silver & red colors

from

$159.99

This car cover fits cars 170″ L x 60″ W x 48″ H.
This indoor vehicle cover is made from a stretchable material conforms to you car
Extremely soft fleece lining to protect your car from scratches
This auto cover is suitable for indoor use or for garage kept vehicles
Available in black, silver & red colors

from

$49.99

AVS Original Ventvisor is an external mount side window deflector with an unique design that allows fresh air to circulate through open windows while keeping the weather out reducing interior heat and window fogging. Original Ventvisors come with a .

Product Features:

Precision Engineered For A Custom Fit On Your Vehicle With Modern, Curved Design
Easy Installation With No-Drilling Or Special Hardware Required
Attaches Easily With 3M(TM) Automotive-Grade Adhesive Above The Window
Made From Durable, Impact-Resistant Acrylic
Available In Dark Smoke And Chrome Finishes

from

$35.99

The Universal Car Remote Classic has an easy “no tools” setup, replaces 156 remotes, and is compatible with 5 million vehicles from 1997-2016. There’s never been an easier way to provide remote replacement.

Product Features:

Introducing world’s first and only universal car remote for vehicles from 1997-2016.
Compatible with 5 million vehicles from 1997-2016
Freshly installed battery included

from

$49.99

Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:

Saves wear and tear on your engine
Simple installation directly into engine block

Eagle Talon Interior Products

from

$23.29

Product Features:

Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

from

$6.29

Pedal cover worn out or missing? This brake pedal pad is a direct replacement for a cracked, worn or missing pad, restoring a safe gripping surface to the brake pedal for safety and comfort.

Product Features:

Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover
Durable materials – this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver’s shoe
Easy installation – this pad slides onto the brake pedal and requires no special tools or hardware
Quality tested – this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle’s application

from

$6.29

Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:

Needa Parts offers a complete assortment for all popular makes and models
Vehicle make specific fastener kits are available
All fasteners meet or exceed OEM standards

from

$83.99

The CommandFlo allows adjustment of the fuel flow rate which lets you properly tune the air fuel ratio. Ideal for use with free flow intakes and exhaust systems.

Product Features:

Accurate Fuel Pressure Measurement
Prevents Lean Conditions
White face
Up to 100 psi
Sold individually

from

$14.29

ATP Speedometer Cable Core Kit provides a lower cost alternative to cable repair when the cable core has broken or kinked. Each kit includes 0.130″ diameter S.A.E./O.E.M. standard multi-coiled wire cable with squared end, universal metal tip and spacer washer. Cut cable end to desired length and attach tip using staking tool (included). The overall length of the cable core is 120″.

Product Features:

Easy to install
Will fit many custom applications
Low cost alternative

from

$101.99

Product Features:

Optimally positions key performance data within driver’s field of vision
Professional fit and finish, this mounting solution attaches to the factory pillar effortlessly by utilizing the included mounting hardware
Black textured finish which can be painted to match your interior if desired
High quality, composite construction is incredibly durable and looks great
Seamlessly integrate AutoMeter 2-1/16″ gauges into your interior

from

$50.99

Product Features:

Optimally positions key performance data within driver’s field of vision
Professional fit and finish, this mounting solution attaches to the factory pillar effortlessly by utilizing the included mounting hardware
Black textured finish which can be painted to match your interior if desired
High quality, composite construction is incredibly durable and looks great
Seamlessly integrate AutoMeter 2-1/16″ gauges into your interior

from

$52.99

Product Features:

Optimally positions key performance data within driver’s field of vision
Professional fit and finish, this mounting solution attaches to the factory pillar effortlessly by utilizing the included mounting hardware
Black textured finish which can be painted to match your interior if desired
High quality, composite construction is incredibly durable and looks great
Seamlessly integrate AutoMeter 2-1/16″ gauges into your interior

from

$87.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Combination Switch provides centralized control of multiple vehicle functions such as headlights, turn signals, and wipers, enhancing driver convenience and safety by allowing seamless operation from a single control point. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$106.99

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

Made of soft elegant rich velour
Custom made to fit each dashboard
Hook & loop fasteners included for easy & secure installation
Cuts hazardous windshield glare
Protects dashboard from sun damage stopping cracks and warping
Passenger-side airbag opening included where applicable

from

$105.99

The Limited Edition Custom Dashboard Cover features a new warp-knit polyester fabric style that looks great with today’s vehicle interiors. Individually made to fit your vehicle’s specific dashboard. DashMat dashboard covers are a stylish way to cut windshield haze caused by gasses emitted from the dashboard. Dramatically reduces hazardous windshield glare as well. Rays from the sun beat through the dashboard at extremely high temperatures causing damage to the dashboard. Limited Edition DashMat dash covers protect your vehicle’s dashboard in the most extreme temperature conditions.

Product Features:

Unique warp-knit design fits perfectly with today’s vehicle interiors
Compliments technical fabrics in newer vehicles
Custom fit to the dashboard of your vehicle
Helps prevent dashboard warping and cracking
Reduces hazardous windshield glare
Vents and sensor openings pre-cut for a factory finish look
Passenger-side airbag opening included where applicable
Hook and loop fasteners included for easy secure installation

from

$106.99

Made of soft elegant rich velour
Custom made to fit each dashboard
Hook & loop fasteners included for easy & secure installation
Cuts hazardous windshield glare
Protects dashboard from sun damage stopping cracks and warping
Passenger-side airbag opening included where applicable

from

$112.99

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

The rich appearance and feel of suede-like fabric
Custom tailored for a precise, snug fit
Protects your dash from sun damage and reduces windshield glare
Vents, sensors and trays remain fully functional
Simple installation with hook and loop fasteners

from

$10.05

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our blower motor resistors are a direct-fit replacement electrically operated resistor that replaces damaged OE units restoring a/c and heater blower motor variable speed control
Each of our blower motor resistors is made from high quality ceramics with copper electrical connectors to ensure accurate and precise resistance values for long life and high performance.
Robust design and high grade materials meet the stringent demands of today’s service professional
All of our switches are made to OE spec to ensure proper fit, form and function
All parts are manufactured to stringent quality requirements.

from

$4.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$50.99

Accelerator cables connect the foot pedal to either the carburetor or EFI assembly. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP accelerator cables are designed to fit And function just like the original part to ensure durability And long life.

Product Features:

Includes brackets, grommets, etc to match original
Fit and function like the original parts
Restores normal operation

from

$49.99

Accelerator cables connect the foot pedal to either the carburetor or EFI assembly. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP accelerator cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Includes brackets, grommets, etc to match original
Fit and function like the original parts
Restores normal operation

from

$18.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Looking for the best Eagle Talon aftermarket replacement parts? Replacing worn and broken parts on your Eagle Talon? Check out our online catalog to find the best selection of aftermarket Eagle Talon parts as well as real user reviews on Eagle Talon replacement parts. Make an informed decision about every component you add to your Talon.

At Advance Auto, we’ve got you covered when it comes to getting your Eagle Talon in tip top condition. We’ve got over 1,498 Eagle Talon parts to choose from in popular categories like Body Parts, Transmission Parts and Clutch Systems. If you’re looking for the best prices, try searching our Eagle Talon parts catalog to compare OEM and aftermarket parts for your Eagle Talon.

Whether you need Eagle Talon body parts, interior components, or custom Eagle Talon parts you can find them online at Advance Auto. Want to order your Automotive Accessories online? Or maybe you need your Eagle Interior Products same day? No problem, you can pick up Talon parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Eagle Talon parts has never been easier.

Advance Auto customers frequently search for the following types of Eagle Talon auto parts. Check out customer reviews and ratings, and compare prices on the following Eagle Talon parts:

People also search Advance Auto for these popular years of the Eagle Talon:

Eagle Talon Parts

KAI – Fender Splash Shield (Part No.MI1250102)

KAI – Fender Splash Shield (Part No.MI1251102)

Atlas Lift – Lift Support (Part No.LS10539)

StrongArm – Liftgate Lift Support: 33.66" Ext Length, 14.54" Travel, 53 Lbs of Force, 1 Pk (Part No.A4952L)

StrongArm – Liftgate Lift Support: 25.24" Ext Length, 10.4" Travel, 55 Lbs of Force, 1 Pk (Part No.C4731)

Dorman – Help – Exterior Door Handle (Part No.77493)

Dorman – Window Regulator: Power, 1 Pack (Part No.740-983)

Dorman – Window Regulator & Motor Assembly: Power, 1 Pack (Part No.741-983)

Burco – Door Mirror Replacement Glass (Part No.2627)

Burco – Side View Replacement Mirror (Part No.2490)

Carquest Premium – Multi-Use Connector (Part No.PTA1313)

Burco – Door Mirror Replacement Glass (Part No.3527)

Burco – Door Mirror Replacement Glass (Part No.3114)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77002)

National – Multi Purpose Seal (Part No.8609)

ATP – AT SHF LINK BUSHING (Part No.TO-41)

National – Tapered Roller Bearing Assembly (Part No.30305)

ATP – AT SOLENOID GASKET (Part No.TG-31)

Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)

National – Bearing (Part No.JL69349)

ATP – AT SOLENOID SEAL (Part No.JO-15)

ATP – AT TORQUE CONVT SEAL (Part No.TO-4)

Carquest Premium – Back Up Light Switch (Part No.SBA4452)

Anchor – Transmission Mount: Right, 1 Piece (Part No.8700)

ATP – AT SEAL DRIVE AXLE (Part No.TO-55)

National – Multi-Purpose Bearing (Part No.30206)

Driveworks – Oil Seal (Part No.S-320583)

National – Multi Purpose Seal (Part No.712007)

National – Multi-Purpose Bearing (Part No.A-18)

Crown Auto Jeep Replacmnt – 42Rle/ 54Rfe/ 45Rfe/ 545Rfe/ 65Rfe/ 66Rfe Transmission (Part No.4446544)

National – Wheel Bearing (Part No.511014)

Driveworks – Manual Transmission Output Shaft Seal (Part No.S-710259)

National – Multi-Purpose Bearing (Part No.30207)

Driveworks – Manual Transmission Input Shaft Seal (Part No.S-223014)

Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.CR73)

FAG US – Bearing (Part No.6207)

Felpro – Transmission Oil Pan Gasket 14 Bolt Hole One Piece Gasket (Part No.TOS 18703)

Pro-King – Automatic Transmission Solenoid Block (Part No.52-0217)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.SBE4945)

LuK – Clutch Slave Cylinder (Part No.LSC145)

LuK – LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER (Part No.LSC143)

LuK – LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER (Part No.LSC146)

ATP – CLUTCH CABLE (Part No.Y-1146)

ATP – Clutch Cable (Part No.Y-779)

LuK – Clutch Master Cylinder (Part No.LMC339)

LuK – Clutch Master Cylinder (Part No.LMC158)

LuK – LuK Original Equipment Quality Replacement CLUTCH MASTER CYLINDER (Part No.LMC159)

Carquest Wearever – Clutch Hydraulic Hose (Part No.BHA38946)

ATP – FLYWHEEL SHIM (Part No.TS-7)

ATP – FLYWHEEL SHIM (Part No.TS-8)

LuK – Clutch Kit: 7 7/8" Disc Diameter, 7/8 " Input Shaft Diameter, 20 Tooth Spline (Part No.05-022)

LuK – Clutch Kit: 9 1/16" Disc Diameter, 15/16" Input Shaft Diameter, 17 Tooth Spline (Part No.05-085)

LuK – Clutch Kit: 8 1/4" Disc Diameter, 7/8 " Input Shaft Diameter, 20 Tooth Spline (Part No.05-051)

LuK – Original Equipment Quality Replacement Clutch Kit (Part No.05-048)

ATP – Automatic Transmission Flex Plate (Part No.Z-329)

ATP – AT FLEX PLATE (Part No.Z-403)

Driveworks – Clutch Release Bearing (Part No.S-614121)

National – Clutch Release Bearing (Part No.614099)

National – Clutch Release Bearing (Part No.614126)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 33.0" Wide Sunroofs, Smoke, Outside Mount, 1 Pice (Part No.77001)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 41.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77005)

Auto Ventshade (AVS) – Windflector – Pop-Out, Window, Fits Up To 32.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.78060)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 38.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77004)

Auto Ventshade (AVS) – Windflector – Pop-Out, Window, Fits Up To 36.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.78062)

Budge – Indoor Stretch Car Cover Black Size 2 Fits Cars up to 14 ft. 2 in. L Soft Inner Lining (Part No.BSC-2)

Budge – Indoor Stretch Car Cover Red Size 2: Fits up to 14 ft. 2 in. L, Soft Inner Lining (Part No.RSC-2)

Budge – Indoor Stretch Car Cover Silver Size 2 Fits up to 14 ft. 2 in. L Soft Inner Lining (Part No.GSC-2)

Auto Ventshade (AVS) – Ventvisor Window Visors, Outside Mount, Smoke, Front, 2 Pc (Part No.92109)

iKeyless – The Universal Car Remote Classic (Part No.UFCRCLASSIC)

Kat’s – Freeze Plug Heater (Part No.11411)

Carquest – A/C and Heater Relay (Part No.R3177)

Dorman – Help – Brake/Clutch Pedal Pad (Part No.20011)

Needa Parts – Nylon Grommet (Part No.459840B)

B & M – Fuel Accessory, Fuel Pressure Gauge (Part No.46054)

ATP – Universal Speedometer Core Repair Kit 120" (Part No.YC-101)

AutoMeter – Gauge Mount; A-Pillar; Full; Dual; 2 1/16"; Eclipse/Talon 95-99 (Part No.22610)

AutoMeter – Gauge Mount; A-Pillar Pod; Dual; 2 1/16"; Eclipse/Talon/Laser 90-94 (Part No.20600)

AutoMeter – Gauge Mount; A-Pillar Pod; Dual; 2 1/16"; Eclipse/Talon 95-99 (Part No.20610)

Carquest Premium – Turn Signal Switch (Part No.SAE1244)