1995 Dodge Ram 3500 Bodies and Fender Parts

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications are Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

• Foam Construction
• Meets Quality Standards
• Bump Stops Prevent Expensive Body Damage To Lifted Jeep Vehicles
• Easy To Install

Spare tire hoist rusted out and corroded? This replacement hoist is specifically engineered to match the original design on specific vehicles, and it’s specially coated to resist future rust and corrosion.

Product Features:

• Direct replacement – this spare tire hoist is precisely engineered to replace the hoist that comes stock on specific vehicle years, makes and models
• Easy installation – simply remove the spare tire, unbolt the original part, and bolt on this replacement
• Functionality ensured – hoist appearance may vary slightly from original part but functions the same
• Corrosion resistant – specially coated to prevent future rust and corrosion

New Standard Replacement Driver Side Fender Liner, All 02-05 1500, All 03-04 2500, 05 Fits RWD 2500/3500

Product Features:

• All 02-05 1500, All 03-04 2500, 05 Fits RWD 2500/3500, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Rocker Panel Extension, 30.8 X 13.9 X 5

Product Features:

• 30.8 X 13.9 X 5, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Fender

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Premium Replacement Driver Side Fender, (2002 Old Style)

Product Features:

• 2002 Old Style, Made Of Galvanized Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

• Protects vehicle’s hood from bugs or rock chips
• Low profile, aerodynamic design
• Installs in less than 5 minutes, no tools required
• Custom fit exactly to your vehicle
• Leather grain vinyl

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

• Full front end coverage
• Custom fit exactly to your vehicle
• Installs easily with no drilling or tools
• Leather grain vinyl
• Protect against rock chips, bugs and road tar
• Soft inner layer

The WeatherTech MudFlap – Laser Measured for a Perfect Fit set literally mounts-in-minutes (in most applications) without the need for wheel/tire removal, and most importantly – without the need for drilling into the vehicle fragile painted metal surface Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech MudFlap will offer undeniable vehicle protection.

Product Features:

• Protects Your Vehicle Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Vehicle Wheels
• Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
• Provide Protection For Your Vehicles Most Vulnerable Rust Area
• Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Molded From A Proprietary Thermoplastic Resin
• No Drilling Required And Installs In Minutes

Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.

Product Features:

• Protect Your Vehicle And Trailer From Rocks And Messy Conditions
• Universal Fitting
• Easy No Drill Installation
• Perfect Compliment Nerf Bars

New CAPA Certified Premium Replacement Rear Step Bumper Assembly, Chrome (Includes Inner And Outer Brackets/Pad And Lights)

Product Features:

• Chrome (Includes Inner And Outer Brackets/Pad And Lights), Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Premium Replacement Rear Step Bumper Assembly, Chrome (Includes Inner And Outer Brackets/Pad And Lights)

Product Features:

• Chrome (Includes Inner And Outer Brackets/Pad And Lights), Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Economy Replacement Rear Step Bumper Face Bar, Chrome

Product Features:

• Chrome, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New, Economy Replacement Rear Bumper Face Bar, Prime Finish, Without Dual Exhaust, Without Park Assist Sensor Holes

Product Features:

• Meets All Federal Motor Safety Standards
• No Drilling Or Modifications Needed For Installation
• Same Form Fit As OE

Take a step up with a set of LUND’s Round Bent Nerf Bars. These oval nerf bars are designed to custom fit your vehicle, complementing the overall look while providing you with safe, sure footing in and out of your vehicle – no matter your shoe type. In fact, each bar has a recessed step area with UV-resistant rubber grip pads providing solid traction and stability. LUND’s Round Bent Nerf Bars feature chrome-plated or all black matte finishes and are designed with a tubular shape and curved style, creating a rugged yet contemporary look and feel. Designed and engineered to go the distance LUND’s Round Bent Nerf Bars are constructed with a cutting-edge polymer material set within a lightweight, durable aluminum frame, making these bars tough as metal and virtually corrosion-free. These bars also offer a broad stepping area designed larger than traditional step bars.

Product Features:

• UV Resistant Polymer Pad
• Recessed Aluminum Frame
• Accents The Line Of Your Vehicle
• Limited 3 Year Warranty

ARIES 3″ side bars add a custom look and dependable footing to your truck, Jeep or SUV. They feature a classic style, a strong design and non-skid step pads. ARIES nerf bars are all made vehicle-specific for a custom, no-drill fit, and they are available in multiple finish options. This set of nerf bars is constructed from 304 stainless steel with a polished finish. Our 304 stainless steel is a true stainless with high nickel content, offering better corrosion resistance and a long-lasting finish. The polish is a triple application, resulting in a mirror-like shine to complement your vehicle. ARIES 3″ round side bars also come with high-strength steel brackets and non-skid step pads. The mounting brackets — as well as the side bars and step pads — are custom-designed for specific makes and models to allow the nerf bars to contour to the lines of your vehicle. This ensures easy, no-drill installation and the strength necessary to provide solid footing. This particular set of custom nerf bars fits specific years of the Ram 1500, 2500 or 3500 and Dodge Ram 1500, 2500 or 3500 (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of polypropylene. These wide, custom-positioned step pads feature a textured pattern and cover a wide portion of the tubes to be more comfortable and high-traction, even in wet conditions.

Product Features:

• Unique bends to contour to the body of the vehicle
• Custom, non-skid step pads for safe entry and exit
• 3″ diameter, heavy-wall tube design
• 304 stainless steel construction to be strong and truly rust-resistant
• Mirror-like polished stainless steel finish for a bright, clean accent
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty steel mounting brackets for a solid step

New ProEFX Rear Roll Pan With License Plate

Product Features:

• With License Plate
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New ProEFX Rear Roll Pan Without License Plate

Product Features:

• Without License Plate
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

LUND’s EX-ExtraWide Style flare series offers a blend between factory style looks and off-road flare. Designed for larger tires and wheels, this wide style is an excellent choice for all trucks with oversized wheels and tires. Even if you haven’t added giant tires that stick out from the stock wheel arches, you still might like the burly look of the wider flares. Depending on the model application, the extra 4-6 inches of body coverage is also a quick fix for hiding rust and other fender blemishes, reducing the need for expensive paint and bodywork. The extra width of coverage for the tires ensures optimum vehicle body protection from rocks and road debris, keeping paint and body damage to a minimum. This durable extra-wide fender flare, available in four-piece sets, is designed to not only add a rugged, off-road look, but also protect the sides of your vehicle from road debris and harsh outdoor elements. LUND’s EX-ExtraWide Style flares are made with Tri-Flex ABS thermoplastic material to allow for maximum strength and flexibility – built to last; backed by a Limited Lifetime Warranty.Straight from the die, the flare has a satiny (standard) or textured finish that looks great as is, but can also be easily prepped and painted to match your vehicle. Maintenance is easy! You can use any detergent you use to wash your vehicle to clean the flares as well.

Product Features:

• Provides Extra Coverage On Larger Tire Packages
• Extra Fender Coverage Protects From Debris
• Made From Durable OEM-Style ABS Plastic
• Can Be Prepped, Primed And Painted
• Installs With Out Drilling
• Covers Rust And Fender Blemishes
• Mounting Hardware Included
• Designed For Perfect Fitment
• UV Resistant From Color Fading
• Limited Lifetime Warranty

LUND’s SX-Sport Style fender flares seamlessly add OE style to your Chevy Silverado, Toyota Tundra, GMC Sierra, Dodge Ram or Ford truck. This fender flare style is perfect for those looking for clean line accessories that blend well with their vehicle. The flares’ low profile complements the original design and contours of the wheel well while adding a distinctive style.This durable fender flare, available in two and four-piece sets, is designed to not only add style, but also protect the brilliant coat of paint and the sides of your vehicle from road debris and harsh outdoor elements and weather conditions. LUND SX-Sport Style fender flares are made with Tri-Flex ABS thermoplastic material to allow for maximum strength and flexibility-UV-resistant and built to last; backed by a Limited Lifetime Warranty. Straight from the die, the flare has a smooth (standard) or textured finish that looks great as is, but can also be easily prepped and painted to match your vehicle. Maintenance is easy! You can use any detergent to wash your vehicle to clean the flares as well.

Product Features:

• Bring A Neat And Seamless Style To Your Vehicle
• Perfect Clean Line Accessory
• Blends In Well And Looks Like It Came From The Factory
• Protects Your Vehicle From Road Debris
• Made From Durable OEM-Style ABS Plastic
• Can Be Prepped, Primed And Painted
• Installs Quickly With Included Fasteners
• No Modification Is Necessary
• Covers Rust And Fender Blemishes
• Designed For Perfect Fitment
• UV Resistant From Color Fading
• Limited Lifetime Warranty

BodyMntBshKt

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

• Assures Longer Lasting Cab to Bed Alignment
• Replace to Restore Ride Height
• Gain Durability
• Stronger Than Original Rubber Mounts

Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Corrosion Resistant Extruded Aluminum Board
• Slip Resistant Textured Step Surface
• Injection Molded Polymer End Caps
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit Available PN[27-6000]

Xtremeline / Streamline bars -The new and unique design has the styling appeal of a side bar coupled with easy installation features and strength of a running board. With a 5-inch step these bars have over 50% more step area than regular tube steps. Stylish custom molded end caps add streamline styling, can be painted for a custom finish and seals the step from moisture. Results in an OEM finished look. No Drilling most applications – Heavy-duty mounting brackets mount to existing factory holes. A new innovation in mounting brackets make installing these bars quick & easy and the bar can be positioned forward or back to compliment individual style or bar location needs. Rampage Exclusive: Galvanized Steel – Powder Coat, Weather Seal Brackets, Note: Xtremeline and Streamline Bars may also be installed with other aftermarket flat top installation brackets by using the Rampage Top Clamp Conversion Kit.

Product Features:

• New And Unique Design
• 5 in. Step Pads
• Custom Molded End Caps For Streamline Styling
• Sealed To Prevent Moisture
• No Drill Installation
• Newly Innovated Installation Brackets
• Quick Easy And Reliable Install
• Vehicle Specific Mount Required
• Must Be Purchased Separately

New Standard Replacement Driver Side Cab Floor, 46 X 15 X 10

Product Features:

• 46 X 15 X 10, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle