1995 Chevrolet Tahoe Performance and Racing Products

Below you will find various in-demand Chevrolet Performance and Racing Products, components and accessories for your 1995 Tahoe. Advance Auto Parts has popular Tahoe parts like Performance Distributors, Performance Engines, Performance Ignition Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Tahoe model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 1995 Chevrolet Tahoe Performance and Racing Products below and start saving instantly.

Popular 1995 Chevrolet Tahoe Performance and Racing Products Categories

Performance Starters

Performance Intake Manifolds

Performance Coils

Performance Exhaust Mufflers

Performance Distributor Cap and Rotor Kits

Engine Cold Air Intakes

Performance Shifters

Performance Distributors

Performance Valve Covers

Performance Throttle Body Spacers

Performance Engine Water Pumps

Performance Radiator Caps

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Ignition Modules

Performance Distributor Components

Performance Clutch Pressure Plate and Disc Sets

Performance Engine Timing Sets and Components

Performance Engine Valve Springs

Performance Engine Valve Cover Gasket Sets

Performance Spark Plug Wires

Performance Chassis Bushing Kits

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Posi Units and Components

Performance Oil Pans

Performance Timing Covers and Tabs

Performance Leaf Spring Bushings

Performance Valve Cover Hardware

Performance Upper Performance Control Arm Bushings

Performance Engine Rocker Arms

Performance Engine Oil Pan Gaskets

Performance Ring and Pinions

Performance Ignition Parts

Performance Intake Manifold Hardware

Performance Sway Bar Link Kits

Performance Lower Control Arm Bushings

Performance Engine Main Bearing Gasket Sets

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Oil Filler Caps

Performance Engine Cylinder Head Installation Kits

Performance Engine Timing Cover Gasket Sets

Performance Engine Push Rods

Performance Engine Cylinder Heads

Performance Torque Converters

Performance Ignition Systems

Performance Engine Valve Spring Retainer

Manual Transmission Main Shaft Race

Essential Performance and Racing Products for 1995 Chevrolet Tahoes

from

$709.99

Holeshot 2400 for GM 1998 to 2002 4L60E Camaro and Firebird with an LS1 engine Application: GM 1998 to 2002 4L60E Camaro and Firebird with LS1 A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benef

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$27.49

These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.

Product Features:

Assures Accurate Torque App
Prevents Galling Manifold
Grade 5 Material
Black Oxide Coasted

from

$48.09

The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:

Indicates coolant temperature
Helps prevent coolant injuries
Fahrenheit and centigrade readings
Color-coded temperature ranges
Integrated coolant reclamation valve
Improves under-hood appearance
Chromed crown with a colored trim ring

from

$20.99

Performance mechanical advance springs.

Product Features:

PerTronix D700700 Advance Spring Kit Flame-Thrower Billet Distributor
Performance mechanical advance springs.

from

$48.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$42.49

Manufactured from cellulose/nitrile composition gasket material. A black latex rubber coating is applied to outside of gasket to help seal minor oil pan rail irregularities and eliminate the possibility of oil leakage. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals. For original equipment replacement, high performance street, drag race and oval track.

Product Features:

Manufactured from cellulose/nitrile rubber composition gasket material
Provides excellent sealing and durability
Complete with molded rubber front/rear oil pan end seals where applicable
For OE replacement, high performance street, drag race and oval track use
Graphite Non-Wicking Rubber
No Cork Particles
Easy Removal For Disassembly

from

$13.29

The special self locking timing cover bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5. Application: Chevy small and big block, 1/4 inch-20 ix 1/2 inch,10 pieces.

Product Features:

Ideal For Tight Spaces
Serrations Prevent Loosening
Flange Distributes Pressure
Zinc Plated Bolts
Grade 5 Material
Easy Installation

from

$32.99

This Mr. Gasket Water Pump Bolt Set includes chrome plated grade 5 hex head fasteners to install the water pump on your small or big block Chevrolet with the long style water pump. Includes four 3/8 inch-16 x 2 inch bolts with four 3/8 inch AN washers. AN washers have no exposed shoulder which offers a professional appearance.

Product Features:

Chrome Plated
Grade 5
AN washers with no exposed shoulder for a professional appearance

from

$544.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.

Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.

Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.

Powertrax® = Extreme Traction Systems!

from

$158.99

This high performance ignition module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most GM ignition systems with the externally mounted module. 1990 thru 1995.

Product Features:

Fits Most Stock And Modified Distributors
Dwell Control Circuit
Resists False Triggering

from

$12.99

This chrome-plated steel push-on breather/oil filler cap fits over your oil filler tube. It has a side fitting for easy PCV hose (positive crankcase ventilation) hook up. Perfect compliment to Mr. Gasket matching chrome oil filler tube, #2066

Product Features:

Chrome plated steel
Fits stock factory oil filler tubes
Features side PCV hook up tube
Includes Rubber Grommet

from

$71.99

Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.

Product Features:

Direct performance replacement for GM dual connector coil
100:1 Turns Ratio
Lower Primary Resistance Produces High Voltage Output
Works w/Stock Ignition As Well As MSD Ignitions

from

$605.99

Product Features:

50-State Street Legal Aluminum Cylinder Head
Out-of-the-Box Bolt-On Performance
Hand-Blended Intake and Exhaust Bowls
CNC-Matched Intake/Exhaust Ports in Std Location
Thicker Deck Surfaces than Other Brands
Hardened Tip Stainless Swirl-Polished Valves
Heli-Coils Rocker Studs And Exhaust Bolt Holes

from

$7.69

CUP

from

$91.99

The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
7mm And 8mm High Gloss Silicone Jacket

from

$73.99

The B&M Shift Improver Kit the easiest way to get the performance you’ve always wanted out of your automatic transmission, two modes to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit.

Product Features:

Provides Crisp Shifts
On Any Stock Automatic Transmission
Eliminates Soft/Sluggish Shift
Eliminates Shift Overlap
Eliminate Clutch and Band Wear
Improves Transmission Life
Transmission Removal Not Required

from

$449.99

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$102.99

DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:

Stainless steel construction for lifelong protection
100% welded design for maximum durability
Straight through design ensures unrestricted exhaust flow and reduces back pressure
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

from

$241.99

Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

Product Features:

Includes Everything Needed
Resistance High Dielectric Strength Compounds
Race Proven
Improved Performance
Reduced Emissions

from

$111.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$9.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$14.99

Spectre’s Valve Cover Hold Downs feature high quality steel construction with a triple chrome-plated finish. Manufactured for an optimum fit, this product’s hex heads include a decorative O-ring cap for a customizable appearance to suit your needs. Sold 4 per package, these studs are intended to fit standard height Chevy Center bolt valve covers.

Product Features:

4 bolts included in each package
Allen head includes decorative O-ring cap
Triple chrome-plated finish
Fits standard height Chevy Center bolt valve covers

from

$68.99

Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.130 inch, Compressed thickness 0.055 inch

Product Features:

Five layer (graphite core/perforated steel outer layers) composite construction
Graphite core is excellent transfering heat away from hot spots in head preventing gasket burn-out.
Provides excellent stability, compressibility and high temperature endurance
Coated with high temperature silicone to ensure sealing of engine fluids
Will not brinell (indent) aluminum cylinder heads
For high performance street, drag race and oval track use
Compatible w/High Octane Fuel
Compatible With Exotic Fuel

from

$210.99

Performance Replacement HEI Distributor, direct plug-in with OE type connectors, GM HEI equipped Cars, Trucks (Pre-Computer). High dielectric strength cap, brass male towers. ACCEL Performance Replacement Distributors are the perfect choice for your daily driver or street machine. Using all new components, these distributors feature High-performance ACCEL Electronics. All new components-housings are either new castings or turned from billet stock, centerless ground shaft with oil lite bushings. High dielectric strength cap, balanced rotor. Male tower distributor cap with brass cap and rotor contacts (Ford and AMC Models feature screw-mounted wire retainer for the ultimate plug wire retention). Iron or steel distributor gear. Direct plug-in replacement with factory-type connectors for plug and play installation.

Product Features:

Direct Plug In Factory Replacement Plug And Play
CNC Machined 6061 T6 Billet Aluminum Housing
High Dielectric Strenght Thermoplastic Cap With Br
4 Topin Module With Dwell Control Triggers At 75 R
Easy Access Fully Adjustable Mechanical Advance
Adjustable Vacuum Advance
Includes Performance Coil
Fit non computerized vehicles

from

$306.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched to Edelbrock Performer Intakes
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$42.49

Designed for use with round stick shifters. Complete with chrome ID plate and mounting hardware. Measures: 4-3/8 in. x 5-3/8 in. with 3 pleats.

Product Features:

Complete with Mounting Hardware
Adapt To Most Shifter Install
Hurst Quality
Works Well with Round Shift Levers
Chrome ID Plate

from

$91.99

Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

from

$14.99

Dowel pins are precision machined and case hardened for accurate head alignment. Two per set. 5/16 inch x 5/8 inch

Product Features:

Precision Machined
Case Hardened
Give Accurate Alignment
2 Per Set

Upgrade your 1995 Chevrolet Tahoe with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1995 Chevrolet Tahoe, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your Tahoe functioning at its best. At Advance Auto Parts, we offer a wide selection of 125 Performance and Racing Products for the 1995 Chevrolet Tahoe, designed to meet your needs without breaking the bank. From Performance Distributor replacements to Performance Engines upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1995 Chevrolet Tahoe at great prices. Our Performance and Racing Products inventory for this model ranges from just $7.69 to $1,028.99, with an average price of $205.71. Our 125 Performance and Racing Products in stock come from 25 trusted brands, so you’re sure to find the right part for your 1995 Chevrolet Tahoe without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1995 Chevrolet Tahoe, we stock popular OEM and aftermarket Performance and Racing Products from top names like Mr. Gasket, MSD Ignition, FEL-PRO Performance, and more. Mr. Gasket Performance and Racing Products start at just $10.49 and boast an impressive 4 stars average rating from customers. MSD Ignition and FEL-PRO Performance also bring quality to the table, with Performance and Racing Products available starting at $20.29, and at an average 4 stars rating. With 152 customer reviews and counting, our 1995 Chevrolet Tahoe Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1995 Chevrolet Tahoe is always ready to roll. We’re committed to providing you with everything you need to keep your Tahoe in top shape, all in one place. Start shopping confidently below for your 1995 Chevrolet Tahoe!

Best-Selling Performance Distributors for 1995 Chevrolet Tahoes

Enhance the driving experience in your Chevrolet with 12 quality Performance Distributor components, starting at $10.99.

show more show less

from

$26.99

Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.

Product Features:

PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
Precision machined chromoly weights and center plate.

from

$241.99

Includes Everything Needed
Resistance High Dielectric Strength Compounds
Race Proven
Improved Performance
Reduced Emissions

from

$49.49

The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

Product Features:

Fits stock distributor
High quality material
Brass terminals
High dielectric properties

from

$210.99

Direct Plug In Factory Replacement Plug And Play
CNC Machined 6061 T6 Billet Aluminum Housing
High Dielectric Strenght Thermoplastic Cap With Br
4 Topin Module With Dwell Control Triggers At 75 R
Easy Access Fully Adjustable Mechanical Advance
Adjustable Vacuum Advance
Includes Performance Coil
Fit non computerized vehicles

from

$30.99

Wiring Harness and CapacitorPremium quality wire harness and capacitor insure good connection and “static free” operation.

Product Features:

PerTronix D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor
Premium quality wire harness and capacitor.

from

$224.99

Complete Super Tune Kit
8mm Spiral Core Wires
Accel Classic Core Plugs
High Performance Cap And Rotor
Reduced Emissions

from

$469.99

The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEI. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engine’s idle, improve starting and provide a much higher RPM range. The Ready-to-Run features MSD’s adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engine’s needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice.

Product Features:

Simple and clean three wire installation
Supplied w/An HEI Style Distributor Cap And Rotor
Accepts Cap-A-Dapts
Does not require an MSD Ignition Control
CARB E.O. Approved
Now includes built-in Rev Limiter
O-ring seals can be installed for oil press. control (Mods only)
Special oil tract improves lubrication to the dist./cam gear

from

$20.99

Performance mechanical advance springs.

Product Features:

PerTronix D700700 Advance Spring Kit Flame-Thrower Billet Distributor
Performance mechanical advance springs.

from

$18.99

Rotor for Flame-Thrower cast distributors. Premium rotor with brass contact

Product Features:

PerTronix D660701 Rotor Flame-Thrower Billet Distributor
Rotor for Flame-Thrower cast distributors

from

$15.99

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$15.99

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$10.99

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

Most Popular 1995 Chevrolet Tahoe Performance Engines

Customize your Chevrolet with 48 Performance Engines products like Performance Engine Cylinder Head Gaskets, Performance Intake Manifolds, and Performance Engine Valve Cover Gasket Sets, all priced under $1,028.99.

show more show less

from

$39.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$52.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

from

$23.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$329.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 Deg Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
50-State Street Legal if Correct Carburetor Used
Accepts Late-Model Choke; Waterneck; and HEI
Accepts A/C And Alternator
Accepts Exhaust Heated Chokes

from

$94.99

Manufactured from high quality machine finished aluminum, Spectre’s Throttle Body Spacers are engineered to improve engine performance. By providing added volume to the intake manifold and directing air through a tapered internal constriction, this spacer utilizes the Venturi effect to increase the speed of air flowing into your intake manifold. Spectre has designed a number of kits to fit a wide range of specific applications. Each kit includes the necessary gaskets and hardware to bolt directly to the factory components, making installation quick and easy.

Product Features:

Includes the necessary gaskets and hardware to bolt directly to the factory components
Each kit is designed for the applications listed
Manufactured from high quality machine finished aluminum
Can be installed in less than an hour using common hand tools with no drilling or cutting required
Simple to install

from

$151.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

Complete Kit: Includes Retainers And Locks
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Includes Superior Quality Steel Retainers
Includes 7 deg. Heat-Treated Valve Stem Locks
Retainers and Locks Black Oxide Coated
Non-Rotator Style: Dyno Tested and Street Proven
Great Match to Edelbrock Camshaft Kit

from

$23.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Die cut silicone rubber gaskets conform to out-of-flat covers
Great for on-again/off-again situations
Not intended for use in emission controlled vehicles.

from

$306.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched to Edelbrock Performer Intakes
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$215.99

Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

Product Features:

Twisted Snout Water Pump Design For Updated Style
Street Performance
Heavy Duty Shaft w/5/8 in. Pilot
Six-Blade Stamped Steel
Anti-Cavitation Impeller
100 Percent Leak Tested

from

$215.99

Twisted Snout Water Pump Design For Updated Style
Street Performance
Heavy Duty Shaft w/5/8 in. Pilot
Six-Blade Stamped Steel
Anti-Cavitation Impeller
100 Percent Leak Tested

from

$111.99

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$17.49

These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

Product Features:

Zinc plated to resist corrosion and provide a clean professional appearance
Made from Grade 5 steel for strength and durability
Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
Allen (socket) Head
Zinc Plated For Protection

from

$32.99

Chrome Plated
Grade 5
AN washers with no exposed shoulder for a professional appearance

from

$39.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$65.99

Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$38.49

Ultra-Seal is Mr. Gasket premium valve cover gasket material. It’s manufactured from a high density cork and rubber blend with a black latex coat applied to the outside to help seal minor flange irregularites and eliminate oil leakage. It creates a positive seal by controlled swelling of the gasket material when exposed to hot oil. For original equipment replacement, high performance street, drag race and oval track use. Sold as a pair, these gaskets are .187 inch thick. They fit both 1987-2002 Gen I Chevrolet Small Blocks as well as 1992-1997 Gen II LT-Based Small Blocks.

Product Features:

Manufactured from high-density cork /rubber blend gasket material
A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil
For OE replacement, high performance street, drag race and oval track
.187″ thick
Handles Ex Flange Pressure
Forms Leak Proof Seal
Black Latex Coating

from

$63.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Rigid core, molded silicone rubber gaskets utilize the one-piece molded rubber technology for a perfect fit, ease of installation and include compression limiters to prevent overtightening.
Not intended for use in emission controlled vehicles.

from

$14.99

Dowel pins are precision machined and case hardened for accurate head alignment. Two per set. 5/16 inch x 5/8 inch

Product Features:

Precision Machined
Case Hardened
Give Accurate Alignment
2 Per Set

from

$20.29

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Steel core gasket construction
Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
Not intended for use in emission controlled vehicles.

from

$126.99

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.

Product Features:

Seat pressure: 105 lbs. @ 1.700″, Open Pressure: 273 lbs. @ 1.250″
O.D.: 1.254″, I.D.: .880″
Single valve springs with damper
Approximately .490″ max lift at recommended installed height

from

$68.99

Five layer (graphite core/perforated steel outer layers) composite construction
Graphite core is excellent transfering heat away from hot spots in head preventing gasket burn-out.
Provides excellent stability, compressibility and high temperature endurance
Coated with high temperature silicone to ensure sealing of engine fluids
Will not brinell (indent) aluminum cylinder heads
For high performance street, drag race and oval track use
Compatible w/High Octane Fuel
Compatible With Exotic Fuel

from

$42.49

Manufactured from cellulose/nitrile rubber composition gasket material
Provides excellent sealing and durability
Complete with molded rubber front/rear oil pan end seals where applicable
For OE replacement, high performance street, drag race and oval track use
Graphite Non-Wicking Rubber
No Cork Particles
Easy Removal For Disassembly

from

$37.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
Not intended for use in emission controlled vehicles.

from

$187.99

Product Features:

Case-Hardened Tubing
Surface Hardening
Welded Ends
0.3125 in. Diameter
Use with or without Hardened Steel Guideplates

from

$94.99

Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Product Features:

Black Oxide Coated Grade 8 Steel
Kit Contains 16 Studs
Easy To Install
Heat Treated Steel
Prevents Stud Flexing
Black Plated Finish

from

$65.99

Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts. Includes sixteen studs 3/8-24 x 1.47 inch long top x 7/16-14 bottom.

Product Features:

Black Oxide Coated Grade 8 Steel
Kit Contains 16 Studs
Easy To Install
Heat Treated Steel
Grade 8 Steel

from

$87.19

Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.

Product Features:

(16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
Shank O.D. .540″
Includes Locks and Hex Wrench
High-Quality Grade Steel
Heat-Treated For Ex Strength
Plated With Durable Gold Tone Finish

from

$1028.99

Product Features:

Designed for 1987-95 Throttle Body Injection or Tuned Port Injection 5.7L Small-Block Chevy engines originally equipped with center bolt valve covers
Flat Tappet Camshaft Type
60cc chambers with 165cc intake ports
Size of intake valve is 2.02 in. and exhaust valve is 1.60 in.
Sold as one complete head

from

$999.99

Product Features:

Designed For Today’s Larger Cubic Inch Big Block
Perfect For Hard Core Drag Racers
Permanent Mold Casting Process
For Lighter And More Consistent Castings
Dyno Proven To Make 17hp More Than Competitors

from

$709.99

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$704.99

Product Features:

Great For Street Machines/Street Rods/Muscle Cars
Two Piece Design
Individual D-Shaped Runners
Optimized For Broad Power Range/Large Plenum Area
Can Be Used For Blow-Through Superchargers
Fully CNC Machined For A Perfect Fit
No Exhaust Crossover

from

$609.99

HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) Application: HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine
New Turbine Hub
New Springs/Rollers In Stator

from

$605.99

Product Features:

50-State Street Legal Aluminum Cylinder Head
Out-of-the-Box Bolt-On Performance
Hand-Blended Intake and Exhaust Bowls
CNC-Matched Intake/Exhaust Ports in Std Location
Thicker Deck Surfaces than Other Brands
Hardened Tip Stainless Swirl-Polished Valves
Heli-Coils Rocker Studs And Exhaust Bolt Holes

from

$544.99

The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, new turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$463.99

Utilizes late model alternator and A/C bracket mounting provisions. Has vacuum taps off Manifold runners. Uses cable bracket P/N 20-101 for GM 700R4 transmission. Extra installation hardware included.

Product Features:

High Rise Dual Plane Design
Holley Pro-Jection Tbi Mounting Flange
Erg Provisions

from

$371.99

Product Features:

High Rise/Dual Plane Design For Maximum Torque
Fully CNC Machined For A Perfect Fit
Square Bore Carburetor Flange
Exhaust Crossover For Improved Street Drivability
Permanent Mold Casting Process
Lighter/Smoother/Better Looking
More Consistent Castings

from

$259.99

Product Features:

2000-6500 RPM Power Band
Single Plane/Open Plenum Design
No Provision For Divorced Or Hot Air Choke
Square Flange Carburetor Mounting

from

$203.99

Edelbrock part #9646 Pushrods are designed for small-block Chevy V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precise forme

Product Features:

7.25 in. Length
0.312 in. Diameter
4130 Chromoly Steel Material
Black Oxide Finish
Made In The USA

from

$147.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

Complete Kit: Includes Retainers And Locks
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Includes Superior Quality Steel Retainers
Includes 7 deg. Heat-Treated Valve Stem Locks
Retainers and Locks Black Oxide Coated
Dyno Tested And Street Proven
Great Match to Edelbrock Camshaft Kit

from

$112.99

Use with a short water pump to convert to a long water pump.

Product Features:

Water Pump Spacer Kit

from

$99.99

Product Features:

Use W/ Valve Springs Part #5703, 5794
Set of 16
1.50 in. Outside Diameter
Steel Material
Black Oxide Finish

from

$95.99

Valve spring retainers for use OE cast iron heads. Superior quality heat-treated steel. Machined for strength with black oxide finish. Finish ensures rust and corrosion protection.

Product Features:

Valve Spring Retainers for Use OE Cast Iron Heads
Superior Quality Heat-Treated Steel
Machined for Strength with Black Oxide Finish
Finish Ensures Rust and Corrosion Protection

from

$75.99

Finish your custom engine job with these show quality grade 5 chromed 12-point bolts, includes AN washers which have no exposed shoulder for a professional appearance. Includes (12) 3/8-16 x 1 inch bolts with (12) 3/8 inch AN washers.

Product Features:

Chrome plated
Grade 8
12-point head
AN washers with no exposed shoulder for a professional appearance

from

$68.99

High performance, race quality gasket with molded rubber coating over a steel core. Steel core provides rigidity and durability, preventing prevent push out while the molded rubber coating helps seal minor oil pan rail irregularities. The one piece design eliminates the need for separate end seals to make installation easier and even further reduce the possibility of oil leakage. Provides excellent sealing and durability. Excellent replacement for stock original equipment, high performance street, drag race and oval track. Includes gasket and new oil pan bolts.

Product Features:

Steel core provides rigidity, durability and prevents gasket push out
Molded rubber coating seals minor irregularities in pan surface
One piece design is easier to install and even less prone to leak
Direct replacement suitable for all uses – street, racing, heavy duty
Include both gasket and new oil pan bolts

from

$64.19

These are high quality nuts with allen set screws to provide you with that positive lock needed for Race or original equipment Rocker Arms.

Product Features:

They Are Zinc Dichromate Plated Steel
They Have Black Oxide Coated Set Screws
Keeps Rocker Arms Positively Locked
(16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
Includes Locks and Hex Wrench
Shank O.D. .603″

from

$42.49

With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways can’t give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does even number adjustment 0-8 degrees.

Product Features:

Advance the cam for increased torque and horsepower
Tune your powerband for more end torque or increase top end horsepower
Includes (4) offset bushings and (1) 0 degree bushing
Cam sprocket dowel pin hole must be drilled to .406¿ (13/32¿) dia.
Cam sprocket dowel pin hole must be drilled to .406┐ (13/32┐) dia.
Increase Top-End Horsepower

from

$29.99

Product Features:

Timing Chain Only

from

$27.49

These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.

Product Features:

Assures Accurate Torque App
Prevents Galling Manifold
Grade 5 Material
Black Oxide Coasted

Top Picks for 1995 Chevrolet Tahoe Performance Ignition Products

Upgrade Chevrolet Tahoes with top-quality Performance Ignition Products parts, including 10 OEM and aftermarket selections for your 1995 model.

show more show less

from

$85.29

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$71.99

Direct performance replacement for GM dual connector coil
100:1 Turns Ratio
Lower Primary Resistance Produces High Voltage Output
Works w/Stock Ignition As Well As MSD Ignitions

from

$65.99

These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Product Features:

Replacement Coil For GM Dual Connector Coil
Improved Turns Ratio
Lower Primary Resistance
Bolt-In replacement coil
Produce More Output Voltage
Smooth Idle

from

$91.99

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
7mm And 8mm High Gloss Silicone Jacket

from

$158.99

Fits Most Stock And Modified Distributors
Dwell Control Circuit
Resists False Triggering

from

$123.99

LUND is the first automotive accessory manufacturer to develop and offer comprehensive packages to customize and personalize trucks, SUVs, and vans. An American-based company and the creator of the wrap hood shield category through the invention of the Interceptor hood shield, LUND designs and manufactures the most stylish, high performance, and premium automotive accessories for trucks and SUVs. Product categories include: Interceptor hood protection, nerf bars, running boards, tonneau covers, exterior accessories, storage boxes, cargo management, and bed accessories.

Product Features:

Unique, stylized hood scoops for trucks and cars
Transform stock hood into a simulated performance hood
Can easily be painted to match any factory color

from

$30.49

Product Features:

Service Part
Makes Connections Quick And Easy

from

$461.99

For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:

6.25 in. Diameter
Absolutely the most accurate way to trigger the ignition.
The non-magnetic pickup cannot be false triggered.
Powerful magnets are embedded in a billet aluminum trigger wheel.

from

$290.99

Replacement crank trigger wheel for small block Chevy
Absolutely the most accurate way to trigger the ignition
The non-magnetic pickup cannot be false triggered
Powerful magnets are embedded in a billet aluminum trigger wheel

from

$186.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

In-Demand Performance Oil Filters for 1995 Chevrolet Tahoes

Select from 2 premium Performance Oil Filters parts for your 1995 Chevrolet Tahoe, with prices ranging from $10.49 to $12.99.

show more show less

from

$10.49

This chrome plated breather, embossed with a Mr. Gasket logo, is perfect for race car vacuum balance systems and OEM use. It fits any 1 1/4 inch diameter hole. It has metal baffle/foam element with 1 inch outer diameter neck and 5/8 inch outer diameter breather tube.

Product Features:

Internally battled
High-porosity filter
Ideal for high performance
Includes rubber grommet

from

$12.99

Chrome plated steel
Fits stock factory oil filler tubes
Features side PCV hook up tube
Includes Rubber Grommet

Most Sold 1995 Chevrolet Tahoe Performance Exhaust Products

Explore our best-selling Chevrolet parts for the 1995 Tahoe among 14 OEM and aftermarket options starting from $20.99.

show more show less

from

$31.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$102.99

Stainless steel construction for lifelong protection
100% welded design for maximum durability
Straight through design ensures unrestricted exhaust flow and reduces back pressure
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

from

$85.39

Product Features:

Water/Weather Resistant
Re-Useable
Will Not Burn Or Blow Out
Suitable For Port-Matching
Made In USA

from

$20.99

Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.

Product Features:

Manufactured from high-temperature acrylic blend exhaust material
Provides excellent sealing and durability
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use
Resists Deteriorating
Provides Excellent Torque Retention

from

$99.99

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$42.99

Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

Product Features:

Withstands Intense Exhaust Heat
Reusable header, exhaust manifold and collector flange gaskets
Manufactured from “dead soft” aluminum layers – .125″ thick
Easy Removal For Disassembly
Conforms easily to surface irregularities (warped flanges)
Compresses down to 0.060″ to create a tight leak-proof seal
Will not shrink, deteriorate, or blow out- eliminating gasket leaks
For high performance street, drag race and oval track use

from

$42.99

Withstands Intense Exhaust Heat
Reusable header, exhaust manifold and collector flange gaskets
Resists Deteriorating
Manufactured from “dead soft” aluminum layers – .125″ thick
Easy Removal For Disassembly
Conforms easily to surface irregularities (warped flanges)
Compresses down to 0.060″ to create a tight leak-proof seal
Will not shrink, deteriorate, or blow out- eliminating gasket leaks
For high performance street, drag race and oval track use

from

$30.19

Manufactured from high-temperature composite exhaust material. Provides maximum torque retention to eliminate gasket failure. Can be trimmed if necessary for modified port applications. Precision die cut for an excellent fit. For OE replacement, high-performance street, drag race and oval track.

Product Features:

High-Temperature Exhaust Material
Withstands Extreme Exhaust Heat
Provides Excellent Sealing And Durability
Superior Tensile Strength
Resists Deteriorating
Provides Excellent Torque Retention

from

$133.99

The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$185.99

The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$126.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$60.29

Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.

Product Features:

Will Not Shrink/Deteriorate
Creates A Tight Leak Proof Seal
Helps Lower Under hood Temps
Seals Irregular Surfaces
Seals Slightly Damaged Surface
Ideal For Tow Vehicles
Ideal For Motor Homes

from

$59.99

Will Not Shrink/Deteriorate
Creates A Tight Leak Proof Seal
Helps Lower Under hood Temps
Seals Irregular Surfaces
Seals Slightly Damaged Surface
Ideal For Tow Vehicles
Ideal For Motor Homes

from

$51.99

Header Installation Kit – Chevrolet V8 1955-1991 265-400 Oval Port. Includes gaskets and fasteners necessary for header installation. Made using premium Ultra-Seal exhaust and collector gaskets. Mr. Gasket header and collector bolts deliver necessary clamp-load to seal flange mating surfaces.

Product Features:

Oval Port Header Gaskets
Port Size 1.50″ x 1.82″
Collector Gasket 3.00″ Diam. 3-bolt Style
Includes Header & Collector Bolts

Top-Rated Performance and Racing Products Brands For Your 1995 Chevrolet Tahoe

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1995 Chevrolet Tahoes. Below you’ll find some of our best rated Performance and Racing Products from Mr. Gasket, MSD Ignition, and FEL-PRO Performance, and more. Performance and Racing Products from these brands that fit a 1995 Tahoe start at just $10.49 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Mr. Gasket 1995 Chevrolet Tahoe Performance and Racing Products

When it comes to maintaining or upgrading your 1995 Chevrolet Tahoe, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mr. Gasket ticks all of those boxes. We offer a wide selection of Mr. Gasket Performance and Racing Products, specifically designed for the 1995 Chevrolet Tahoe. With over 27 Mr. Gasket brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $10.49, with an average price of just $44.39. Plus, with over 21 customer reviews and an average rating of 4 stars, you can trust that our Mr. Gasket Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$48.09

This product is not rated

Thermocap Radiator Cap

“”

from
$42.99

This product is not rated

Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal

“”

from
$17.49

This product is not rated

Oil Pan Bolt Kit

“”

Popular MSD Ignition 1995 Chevrolet Tahoe Performance and Racing Products

MSD Ignition auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1995 Chevrolet Tahoe owner should feel confident when installing genuine MSD Ignition parts in their vehicle. To ensure the best fit and performance for your 1995 Tahoe, Advance Auto Parts carries a full inventory of 6 MSD Ignition Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these MSD Ignition Performance and Racing Products range from $49.49 to $469.99, plus, with more than 17 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from
$49.49

(6)

High-Performance Distributor Cap & Rotor Replacement Kit

“great cap n rotor button, well made, working great”

from
$290.99

This product is not rated

Trigger Wheel; Flying Magnet; Small Block Chevy

“”

from
$461.99

This product is not rated

Crank Trigger Kit; Small Block Chevy; 6? Balancer

“”

FAQs for 1995 Chevrolet Tahoe Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1995 Chevrolet Tahoes?

Out of 125 Performance and Racing Products that fit 1995 Chevrolet Tahoes, the following parts are the top sellers:

Performance Exhaust Gasket Set for Enhanced Sealing and Durability (5020441) – $20.99
Aluminum Exhaust Gaskets for Intense Heat Resistance (6900015) – $42.99
Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal (6900014) – $42.99

What’s the price range for 1995 Chevrolet Tahoe Performance and Racing Products?

Performance and Racing Product prices for the 1995 Chevrolet Tahoe start at $7.69 and go up to $1,028.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1995 Chevrolet Tahoe?

The average price for Performance and Racing Products for the 1995 Chevrolet Tahoe is $205.71. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet Tahoe model years?

Yes, we currently carry Performance and Racing Products for 30 model years of Chevrolet Tahoes between 1996 and 2025. Performance and Racing Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Performance and Racing Products for my 1995 Chevrolet Tahoe?

The cheapest 1995 Chevrolet Tahoe Performance and Racing Products we carry in stock are:

CUP (50206003) – $7.69
Tie Rod Dust Boot (17360821) – $9.99
Enhancement Products (5022487) – $10.49
D4260 Flame-Thrower Distributor Rotor HEI/EST Black (10111551) – $10.99
Chrome Oil Fill Cap – Push-On Style W/Tube For Pvc Hookup – Fitting For Easy Pcv Hose Hook Up (12030896) – $12.99

What are the top-rated Performance and Racing Products that fit the 1995 Chevrolet Tahoe?

Out of 152 reviews by customers, our 1995 Chevrolet Tahoe Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1995 Chevrolet Tahoe and their top-rated products:

Performance Air Intake Kits
- Cold Air Intake: Adds Up To 7 Horsepower, With Million Mile Air Filter (17400728) – $349.99

What types of Performance and Racing Products do you sell for my 1995 Chevrolet Tahoe?

As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 1995 Chevrolet Tahoe:

Can I get help with 1995 Chevrolet Tahoe Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.

What is your return policy for Chevrolet Tahoe Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Chevrolet Tahoe Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1995 Chevrolet Tahoe Performance and Racing Products

B & M – Holeshot 2400 (Part No.70441)

Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

PerTronix – D700700 Advance Spring Kit Flame-Thrower Billet Distributor (Part No.D700700)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5204R)

Mr. Gasket – Ultra Seal: Oil Pan Gasket (Part No.5885)

Mr. Gasket – Ultra Seal; Timing Cover Bolts (Part No.6090)

Mr. Gasket – Bolt Water Pump (Part No.4998)

Powertrax – No-Slip Traction System (Part No.9207853005)

Accel – GM Ext. Coil 90-95 Ign Module (Part No.35370)

Mr. Gasket – Chrome Oil Fill Cap – Push-On Style W/Tube For Pvc Hookup – Fitting For Easy Pcv Hose Hook Up (Part No.2063)

MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)

Edelbrock – Engine Cylinder Head (Part No.60849)

FAG US – CUP (Part No.LM48510)

Accel – 8Mm Super Stock Spiral Cust Bk (Part No.5114K)

B & M – Shift Improver Kit For 93-02 4L60E (Part No.70360)

K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter (Part No.77-3082KP)

Dynomax – Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 3" Out, Oval (Part No.17220)

Accel – Tst GM 87-95 5.0/5.7L Tbi (Part No.TST4HP)

Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Spectre – Valve Cover (Part No.5280)

Mr. Gasket – Ultra Seal: Head Gasket (Part No.5799G)

Accel – Dist:Chev V8 Hei Vac W/Coil (Part No.59107C)

Edelbrock – Performer-Plus Camshaft Kit for 1976-95 Small Block Chevrolet (Part No.3702)

Hurst – B-1 Shifter Boot and Plate (Part No.1147336)

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2128R)

Mr. Gasket – Cylinder Head Dowel Pins (Part No.4375)

PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)

Accel – Tst GM 87-95 5.0/5.7L Tbi (Part No.TST4HP)

MSD Ignition – High-Performance Distributor Cap & Rotor Replacement Kit (Part No.8406)

Accel – Dist:Chev V8 Hei Vac W/Coil (Part No.59107C)

PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)

Accel – Tst GM 87-95 5.0/5.7L Tbi (Part No.TST4)

MSD Ignition – Distributor; Chevy V8 with Internal Module (Part No.8360)

PerTronix – D700700 Advance Spring Kit Flame-Thrower Billet Distributor (Part No.D700700)

PerTronix – D660701 Rotor Flame-Thrower Billet Distributor (Part No.D660701)

PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)

PerTronix – D4062 Flame-Thrower HEI Distributor Rotor Blue (Part No.D4062)

PerTronix – D4260 Flame-Thrower Distributor Rotor HEI/EST Black (Part No.D4260)

FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

Edelbrock – Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish (Part No.2104)

Spectre – Throttle Body Injection Spacer (Part No.11252)

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)

Edelbrock – Performer-Plus Camshaft Kit for 1976-95 Small Block Chevrolet (Part No.3702)

Weiand – Action Plus Water Pumps (Part No.9240P)

Weiand – Action Plus Water Pumps (Part No.9208P)

Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

Mr. Gasket – Bolt Water Pump (Part No.4998)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)

Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)

Mr. Gasket – Ultra Seal: Valve Cover Gasket Set (Part No.5867)

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1886)

Mr. Gasket – Cylinder Head Dowel Pins (Part No.4375)

FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)

Competition Cams – Set of 16 Single Springs w/ 1.254" O.D., 1.254" I.D., 1.700" Installed Height (Part No.981-16)

Mr. Gasket – Ultra Seal: Head Gasket (Part No.5799G)

Mr. Gasket – Ultra Seal: Oil Pan Gasket (Part No.5885)

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2919)

Edelbrock – Pushrod Set for S/B Chevy (Part No.9629)

Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1075)

Mr. Gasket – Ultra Seal: Screw-In Rocker Arm Studs (Part No.1076)

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.923G)

Edelbrock – Performer Small-Block Chevy Cylinder Head Hydraulic Flat Tappet Cam (Part No.60859)

Weiand – Team G; Intake Manifold (Part No.7531)

B & M – Holeshot 2400 (Part No.70441)

Weiand – Stealth Ram; Intake Manifold (Part No.7540)

B & M – Holeshot 2400 (Part No.70419)

Edelbrock – Engine Cylinder Head (Part No.60849)

B & M – Torque Converter, Holeshot 2000 (Part No.70417)

Holley – Manifold; SBC Late DP TBI EGR (Part No.300-66)

Weiand – Stealth; Intake Manifold (Part No.8150P)

Weiand – X-CELerator; Intake Manifold (Part No.7547-1)

Edelbrock – Pushrod Set for S/B Chevy (Part No.9646)

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5894)