1995 BMW 530iT Oil and Lubricants
More 1995 BMW 530iT Oil and Lubricants Categories
If you’re looking for an original Oil and Lubricants replacement for a 1995 BMW 530iT, you can search through our selection below. You’ll also find aftermarket and OEM Oil and Lubricants to meet your needs.
Essential 1995 BMW 530iT Oil and Lubricants
FRAM – Full Synthetic 5W-30 Dexos1 Gen 3 Engine Oil: 5 Quart (Part No.F930-5QT)
from
$27.99
FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Excellent sludge and varnish protection
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Castrol – EDGE« High Mileage 10W-40 Full Synthetic Motor Oil 1 Quart (Part No.15989F)
from
$12.99
Castrol EDGE High Mileage with Fluid Titanium Technology is specially formulated for vehicles with over 75K miles and the natural choice for consumers who want to extend maximum engine performance. It’s engineered with Phosphorus Replacement Technology to preserve the catalytic converter and the emission system.
Product Features:
See More
Product Features:
- 10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
- 6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
- From the makers of the #1 High Mileage brand
- Meets API SP/SN PLUS
- Castrol EDGE offers motor oils that meet OEM specification approvals or licenses that cover over 97.3% of the US car parc.
- Available in the following grades: 5W-20, 5W-30, 10W-30, and 10W-40
- Try Castrol EDGE High Mileage today
Castrol – GTX High Mileage Synthetic Blend 5W-20 Motor Oil: Helps Protect Emission Systems, 1 Quart (Part No.15B6E6)
from
$10.49
Castrol® GTX® High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology to help extend the life of the emission system
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards (based on API and ACEA volatility specifications)
- Seal conditioners to help reduce leaks
- Advanced additives that minimize engine wear
- Improved fuel economy (in 5W-20, 5W-30 and 10W-30 grades versus industry specifications)
- Meets or exceeds API SP/SN PLUS/SN, ILSAC GF-6 and latest Ford specs
Castrol – EDGE® 10W-30 Full Synthetic Motor Oil 1 Quart (Part No.152E4E)
from
$11.99
Castrol EDGE with Fluid TITANIUM Technology, is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive.
Product Features:
See More
Product Features:
- 3X Stronger against viscosity breakdown than the leading full synthetic – Based on Kurt Orbahn test in 5W-30 grade
- 10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
- 6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
- Meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M and 4718M, Meets engine test requirements of Chrysler MS 6395
Castrol – EDGE 5W-30 Advanced Full Synthetic Motor Oil: 1 Quart (Part No.152C3C)
from
$11.99
Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive. Today’s engines are smaller, more powerful and under more pressure than ever before. Castrol EDGE has been engineered to withstand the stress of modern engines and provides 10X better high temperature performance than the latest industry standard. Did you know that friction can waste up to 10% of an engine’s performance? Increased demands placed on the engine to deliver power and fuel efficiency create intense friction between critical engine parts. Castrol EDGE transforms its structure under pressure to keep metal apart and reduce friction for maximum engine performance and delivers 6X better wear protection than required by the latest Sequence IVA test limits.
Product Features:
See More
Product Features:
- 3X Stronger against viscosity breakdown than leading full synthetic (Based on Kurt Orbahn test in 5W-30 grade)
- 10X Better High Temperature performance (As measured in Sequence IIIH engine test vs. API SP test limit)
- 6X Better Wear Protection
- 1.4X Better Sludge Protection (As measured in Sequence VH engine test vs. API SP test limit)
Quaker State – 10W-40 Motor Oil 1 Quart (Part No.550034964)
from
$6.29
Quaker State 10W-40 conventional motor oil helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving. It maintains the required viscosity from start to finish, providing optimal protection. Quaker State Motor Oil combats engine sludge and deposits, providing rust protection from harmful acids generated by engine contaminants. It reduces engine wear, providing durable wear protection. Quaker State 10W-40 Motor Oil exceeds the requirements of the following industry specifications: API SN and all previous categories. For a full list of equipment approvals and recommendations, please consult your local Quaker State Technical Help Desk and always consult your owners manual.
Product Features:
See More
Product Features:
- Conventional 10W-40 that provides durable wear protection and reduces engine wear
- Provides corrosion protection against harmful acids generated by engine contaminants
- Maintains viscosity from start to finish, providing optimal oil film protection
- Helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving
- Combats engine sludge and deposits
- Formulated to exceed the requirements of industry specification API SN and all previous categories
- Formerly known as Quaker State Advanced Durability 10W-40 motor oil
Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (Part No.882505)
from
$59.99
Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the #1 gear oil brand.
Product Features:
See More
Product Features:
- EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
- REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
- FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
- MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
- MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)
from
$18.99
We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.
Product Features:
See More
Product Features:
- FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations
- EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
- REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
- MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
- MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
Royal Purple – MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT (Part No.01301)
from
$25.99
Max Gear is recommended for truck and automotive differentials, outboard motor lower units or in rear axles or manual transmissions requiring an API fluid. Max Gear is a high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear-even under severe squeeze film conditions caused by extremely high loads, sudden shock loads or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler and longer without overhauls. It is noncorrosive to both ferrous and nonferrous metals.
Product Features:
See More
Product Features:
- Maximizes horsepower
- Extends gear and bearing life
- Reduces operating temperature
- Lower coefficient of friction
- Superior corrosion protection
- Separates rapidly from water
- For use with open, limited-slip and locking differential
- Contains limited-slip friction modifier
- Made in USA
Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 75W-90, 1 Quart (Part No.VV820)
from
$12.49
Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.
Product Features:
See More
Product Features:
- HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
- EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
- REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
- FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
- SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions
Permatex – Ceramic Extreme Brake Parts Lubricant (Part No.3C210445993PMX)
from
$21.84
5 fl. oz. Tube – A 100% synthetic formula, coupled with real ceramic solids make this premium brake lubricant our longest lasting, most temperature resistant way to silence brake noise. Effective from -50F to 3000F (-46C to 1649C), this product maintains its lubricating integrity under the most extreme conditions. Resistant to corrosion and contaminants, it will not wash out. Suggested Applications: Disc brake caliper hardware, bushings, pistons, rubber sleeves and seals. DIRECTIONS:
Product Features:
See More
Product Features:
- Clean parts to be lubricated with Permatex® Brake and Parts Cleaner
- Apply small amount to caliper hardware, backing plates, bushings and seals to create uniform surface areas and prevent noise. Safe on rubber seals and plastic.
- Lubricant may also be used as a noise suppressor to eliminate caliper brake squeal by applying to the BACK of the brake pad.
- DO NOT APPLY TO ANY BRAKING SURFACES. TECHNICAL DATA SHEET
Popular 1995 BMW 530iT Oil and Lubricants Categories
1995 BMW 530iT Oil and Lubricants
You count on your 1995 BMW 530iT to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Oil and Lubricants. With 79 Oil and Lubricants ranging in price from $6.29 to $79.99, you’re sure to find everything you need for your 1995 BMW 530iT.
Brands matter. If you want to shop a specific Oil and Lubricants brand, we stock 8 different brands like Castrol, FRAM, and Valvoline. 1995 BMW 530iT Oil and Lubricants start as low as $6.29!
One of the best ways to find top quality OEM or aftermarket Oil and Lubricants is by asking professionals. Short of that, you can shop with confidence thanks to our 9,108 extensive product reviews on 1995 BMW 530iT Oil and Lubricants. Some of the top-rated Oil and Lubricants products we carry are Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 1 Quart with 4.9 stars and EDGE 5W-30 Advanced Full Synthetic Motor Oil: 1 Quart with 4.9 stars.
Did we mention you can order your Oil and Lubricants from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Oil and Lubricants inventory for your 1995 BMW 530iT below to get started!
Top-Rated Oil and Lubricants Brands For Your 1995 BMW 530iT
Trusted Oil and Lubricants OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1995 BMW 530iT running right for years to come. In our inventory you’ll find brands like Castrol, FRAM, Valvoline, and even more.
Popular Quaker State Oil and Lubricants
You’ll find popular Quaker State brand products across Lubricants and Motor Oil. All are waiting to get your 1995 BMW 530iT back on the road. Some of the top-rated Quaker State products in these categories are:
Top-Rated Castrol Oil and Lubricants
If Castrol are what you’re looking for, our inventory holds plenty. We stock Castrol brand Oil and Lubricants for your 1995 BMW 530iT, and some of our most reviewed Castrol parts include:
from
$10.49
(670)
GTX High Mileage Synthetic Blend 5W-30 Engine Oil: Helps Protect Emission Systems, 1 Quart
Engine Oil
FAQs for 1995 BMW 530iT Oil and Lubricants
What are the most purchased Oil and Lubricants for the 1995 BMW 530iT?
Out of 79 Oil and Lubricants for the 1995 BMW 530iT, the most popular in our inventory are:
from
$27.99
This product is not rated
Full Synthetic 5W-30 Dexos1 Gen 3 Engine Oil: 5 Quart
Engine Oil
from
$37.99
(367)
Full Synthetic High Mileage with MaxLife Technology 5W-30 Engine Oil: Maximizes Engine Life, 5 Quart
Engine Oil
What are the top-rated 1995 BMW 530iT Oil and Lubricants?
Top-rated Oil and Lubricants for your 1995 BMW 530iT based on customer reviews/ratings are:
from
$11.49
(688)
Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 1 Quart
“Best oil I ever used”
