1994 Toyota Celica Motor Oil

Castrol® GTX® High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (based on API and ACEA volatility specifications)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (in 5W-20, 5W-30 and 10W-30 grades versus industry specifications)
• Meets ILSAC GF-6 specs

FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-Speed Pre-Ignition Control
• Chain Wear Protection
• Piston Cleanliness
• Turbo-Compatibility
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.

Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive. Today’s engines are smaller, more powerful and under more pressure than ever before. Castrol EDGE has been engineered to withstand the stress of modern engines and provides 10X better high temperature performance than the latest industry standard. Did you know that friction can waste up to 10% of an engine’s performance? Increased demands placed on the engine to deliver power and fuel efficiency create intense friction between critical engine parts. Castrol EDGE transforms its structure under pressure to keep metal apart and reduce friction for maximum engine performance and delivers 6X better wear protection than required by the latest Sequence IVA test limits.

Product Features:

• 3x stronger against viscosity breakdown than leading full synthetic (based on kurt orbahn test in 5W-30 grade)
• 10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
• 6x better wear protection
• 1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
• Full Synthetic Oil Composition: Castrol EDGE w/SPT Engine Oil is a full synthetic oil that contains new powerful dispersant molecules, providing superior engine protection and performance.
• Strongest Oil: Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil, providing the best combination of sludge protection, wear protection, and maximum engine performance.

Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. Castrol GTX is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It has evolved to meet the needs of consumers and vehicle manufacturers since 1968 and continues to innovate and remain a trusted brand today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If untreated, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Help Extend the Life of Your Engine with Castrol GTX.

Product Features:

• Superior protection against engine sludge (when tested in engines with a high level of sludge)
• Advanced protection against viscosity and thermal breakdown
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption
• Unsurpassed thermal breakdown protection: GTX Engine Oil, 10W-40 provides superior protection against thermal breakdown, ensuring that your engine stays protected even under extreme temperatures.
• Prevents harmful sludge build-up: GTX Engine Oil, 10W-40 is specially engineered to prevent the build-up of harmful sludge, which can rob your engine of its power and ultimately its life.

Quaker State 10W-40 conventional motor oil helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving. It maintains the required viscosity from start to finish, providing optimal protection. Quaker State Motor Oil combats engine sludge and deposits, providing rust protection from harmful acids generated by engine contaminants. It reduces engine wear, providing durable wear protection. Quaker State 10W-40 Motor Oil exceeds the requirements of the following industry specifications: API SN and all previous categories. For a full list of equipment approvals and recommendations, please consult your local Quaker State Technical Help Desk and always consult your owner’s manual.

Product Features:

• Conventional 10W-40 that provides durable wear protection and reduces engine wear
• Provides corrosion protection against harmful acids generated by engine contaminants
• Maintains viscosity from start to finish, providing optimal oil film protection
• Helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving
• Combats engine sludge and deposits
• Formulated to exceed the requirements of industry specification API SN and all previous categories
• Formerly known as Quaker State Advanced Durability 10W-40 motor oil

FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Specially formulated for high mileage engines: FRAM High Mileage 10W30 Engine Oil is designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines, making it the perfect choice for vehicles with over 75,000 miles.

High-tech low-friction motor oil based on synthetic technology. Ensures excellent engine cleanliness and exceeds even the strictest test requirements of well-known vehicle manufacturers. Reduces the build-up of troublesome deposits in direct-injection gasoline and diesel engines (FSI, TDI, common rail, etc.) and keeps oil consumption low. Assures reliable operation and maximizes the operating life of the diesel particulate filter (DPF). Specifically for vehicles with extremely long oil change intervals (WIV, etc.). Outstanding protection against wear, reduces oil and fuel consumption and ensures fast oil penetration of the engine.

Product Features:

• Outstanding protection against wear
• Reduces oil and fuel consumption
• Ensure fast oil penetration of the engine
• High tech low friction based on synthetic technology
• Made in Germany

FRAM Engine Oil SAE 30 is single grade or straight-viscosity motor oil that meets the stringent API SP, SN Plus / SN, SM, SL & CF specifications. It contains a balanced blend of high VI base stocks and an advanced additive package to deliver superior performance. It is designed to provide thermal and oxidation stability, deposit control, anti-wear protection, corrosion protection and improved pumpability. FRAM Engine Oil SAE 30 may be used in turbo-charged or naturally aspirated foreign and domestic engines recommending straight weight API SP/CF quality oil. This motor oil exceeds the stringent lubricating performance requirements of American, European, Korean, Japanese and other worldwide engine manufacturers where straight weight engine oil is recommended.

Product Features:

• Resists breakdown in severe engine environments
• Effectively prevents the formation of sludge and varnish deposits
• Reduces engine wear
• Turbo approved
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Superior Performance: FRAM Engine Oil SAE 30 is formulated with a balanced blend of high VI base stocks and advanced additives to deliver superior performance, ensuring your engine runs smoothly and efficiently.

FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Reliable engine protection: FRAM Conventional Oil 5W30 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

Castrol® EDGE® High Mileage is 3X stronger against viscosity breakdown than the leading full synthetic oil. Castrol EDGE High Mileage full synthetic motor oil is designed for older cars with over 75,000 miles that need a high mileage oil to protect worn seals, prevent leaks, remove engine sludge and prevent wear and tear of the engine. As your car ages, its engine can lose performance and efficiency. Proper maintenance is critical to keep your older car performing at its best. Tested in the ASTM D6278 test in the 5W-30 viscosity grade.

Product Features:

• Boosted with extra fluid titanium technology to protect your older engine
• Maximizes short and long term engine performance on high mileage engines
• Reduces leaks, oil burn off and power-robbing deposits
• Improves fuel economy
• Castrol EDGE offers motor oils that meet OEM specification approvals or licenses that cover over 97.3% of the US car parc.
• Available in the following grades: 5W-20, 5W-30, 10W-30, and 10W-40
• Try Castrol EDGE High Mileage today

FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.

Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. You won’t need to worry about using a high mileage oil or synthetic because this is both. It’s a synthetic blend engine oil that helps extend the life of your engine by protecting against sludge, wear and burn-off and also liquid engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is actually catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage Motor Oil is liquid engineered with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system and find out how many miles you can go on a high-mileage oil, there is no better choice than Castrol GTX High Mileage Motor Oil.

Product Features:

• Phosphorus replacement technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (based on api and acea volatility specifications)
• Improved fuel economy (in 5w-20, 5w-30 and 10w-30 grades versus industry specifications)
• Provides extra protection for older vehicles: Castrol GTX High Mileage Engine Oil is specifically designed to provide extra protection for high mileage engines, helping to extend the life of your vehicle.
• Synthetic blend composition: This engine oil is a synthetic blend, combining the benefits of both conventional and synthetic oils to provide superior protection against sludge, wear, and burn-off.

Mobil Super 10W-30 Synthetic Blend motor oil helps to extend your engine life and provide engine protection up to 5,000 miles for gasoline cars and light-duty trucks. Mobil Super has 15 percent extra cleaning additives to help prevent the formation of sludge and deposits when compared to Mobil conventional motor oil. Helps to get your engine cleaner, conserve viscosity for easier cold starting, and provide outstanding engine wear protection under a variety of operating conditions. Meets or exceeds the requirements of: API SN, SM, SL, API SN Plus.

Product Features:

• Mobil Super Synthetic Blend motor oil 10W-30 works to protect your engine from sludge and deposits for up to 5,000 miles
• Helps to keep your engine clean with 15 percent extra cleaning additives, preventing sludge and deposit formation
• Works to provide outstanding engine wear protection under a variety of operating conditions
• Enhanced formulation (vs. Mobil basic conventional oil) helps to conserves oil viscosity for easier cold starting
• Recommended for gasoline cars and light-duty trucks

Pennzoil Ultra PlatinumTM Full Synthetic motor oil is made from natural gas, not crude. It is one of the best full synthetic motor oils in our portfolio. Made for extreme performance, Pennzoil Ultra Platinum outperforms conventional oils in terms of low temperature performance and volatility control. Our full synthetic motor oils are uniquely engineered from our revolutionary PurePlusTM Technology which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Because it is made from natural gas, the high- quality base oil contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology creates one of the best formulations in our Pennzoil portfolio. Pennzoil Ultra Platinum far exceeds the most stringent car manufacturer requirements for cleanliness and protection (based on ILSAC GF-6, dexos1 and Ferrari approvals), and is suitable for all car, SUV, light van, truck gasoline and turbocharged engines; under all driving conditions.

Product Features:

• Full synthetic 5W-30 engine oil made from natural gas, not crude, using Pennzoil’s patented gas-to-liquid PurePlus Technology
• No other leading motor oil provides better wear protection for your engine (Based on Sequence IVA wear test using SAE 5W-30)
• Helps protect engines from loss of power and provides better fuel economy-drive on average an extra 550 miles per year (versus a dirty engine)
• Keeps pistons dramatically cleaner than required by the toughest industry standards (Based on ILSAC GF-6 and Sequence IIIH piston deposit test using SAE 5W-30)
• Delivers unsurpassed sludge protection to help keep high-performance and luxury car engines as close as possible to factory clean (Based on Sequence VH Sludge Test using SAE 5W-20)
• Formulated to provide faster low-temperature oil flow and protection in extreme heat
• Pennzoil is the first motor oil made from natural gas, not crude- PurePlus Technology converts pure natural gas into high-quality, full-synthetic base oil that’s crystal clear and contains fewer impurities than other traditional and synthetic motor oils
• Suitable for all car, SUV, light van, truck gasoline and turbocharged engines; under all driving conditions.

Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to sludge, varnish and carbon build-up in your engine: three factors that reduce engine life, power and fuel economy. Castrol Ultraclean is a synthetic blend engine oil available in 0W-20, 5W-20 and 5W-30 grades. Its double-action formula has been proven to clean away the sludge that can block engine oilways* and helps prevent new sludge formation thanks to its synthetic technology. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard. If keeping your engine clean is important to you, it’s good to know that no other oil keeps engines cleaner.

Product Features:

• 1.4X superior sludge protection compared to tough industry standards (As measured in the Sequence VH Sludge test vs. API SP test limits)
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Premium-quality base oils and anti-wear additives that help extend the life of your engine

FRAM Conventional High Mileage 10W40 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 10W40 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.

You trust your car to keep you going, even after 75,000 miles. Mobil 1 Extended Performance High Mileage full-synthetic motor oil 5W-30 gives engines with over 75,000 miles the extra care they need to go the distance. Formulated to help prevent leaks, it helps to protect critical engine parts for up to 20,000 miles between oil changes, guaranteed.(1) Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of maximized engine power. This cutting-edge formula is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s #1 synthetic motor oil brand at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ((1)Protects for up to 20,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2)Source: The NPD Group/Retail Tracking Service/Dollar Sales/PCMO full-synthetic/52 weeks ending July 1, 2023)

Product Features:

• Mobil 1 Extended Performance High Mileage full-synthetic motor oil 5W-30 is designed for engines with over 75,000 miles to go up to 20,000 miles between oil changes.(1)
• Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
• Helps extend engine life by working to prevent damaging deposits and sludge buildup
• Manufacturer Part Number: 123843

Castrol® Ultraclean synthetic blend engine oil is our cleanest GTX ever. Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to the buildup of sludge that can reduce engine life, power and fuel economy. Castrol Ultraclean has a double-action formula proven to clean away the sludge that can block engine oilways and helps prevent new sludge formation from occurring. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard (as measured in the Sequence VH Sludge test vs. API SP test limits). No other oil keeps engines cleaner.

Product Features:

• Premium-quality base oils and anti-wear additives that help extend the life of your engine
• 1.4X superior sludge protection compared to tough industry standards, as measured in the Sequence VH Sludge test vs. API SP test limits
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Meets or exceeds API SP/SN PLUS/SN, ILSAC GF-6 and latest Ford specs

FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation  and shear stability over previous oil categories. 

Product Features:

• Outstanding thermal and oxidation stability
• Excellent sludge and varnish protection
• Faster oil flow at start-up
• Volatility: Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.

FRAM Full Synthetic High Mileage SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 10W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 10W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
• Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• Extends engine life: MaxLife High Mileage Full Synthetic Oil is designed to extend the life of higher mileage vehicles, providing superior protection against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs

FRAM Conventional High Mileage 10W40 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 10W40 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.

30W Small Engine 30W Conventional Oil: 1 Quart

Royal Purple HMX SAE 5W-30 High-Mileage Synthetic Motor Oil, 1 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity.

Product Features:

• Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
• Formulated with robust zinc/phosphorus anti-wear compounds combined with royal purple’s proprietary additive technology
• Hmx is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
• Reduces friction and metal-to-metal contact for peak engine performance
• Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up
• High-Mileage Formula: Specifically designed for engines with more than 75,000 miles, this full synthetic engine oil helps minimize wear and restore lost performance.

Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. Castrol GTX is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It has evolved to meet the needs of consumers and vehicle manufacturers since 1968 and continues to innovate and remain a trusted brand today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If untreated, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Help Extend the Life of Your Engine with Castrol GTX.

Product Features:

• Superior protection against engine sludge (When tested in engines with a high level of sludge)
• Advanced protection against viscosity and thermal breakdown
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption

CASTROL EDGE High Mileage 10W-30 Full Synthetic Motor Oil 1 Quart is the perfect solution for vehicles with over 75K miles. It is formulated with Fluid Titanium Technology and Phosphorus Replacement Technology to provide 10X better high-temperature performance and 6X better wear protection. This motor oil meets API SP/SN PLUS, ILSAC GF-6, GM 6094M standards and offers motor oils that meet OEM specifications. It is available in different grades, including 5W-20, 5W-30, and 10W-30. This motor oil is the natural choice for consumers who want to extend maximum engine performance and preserve the catalytic converter and the emission system. Try CASTROL EDGE High Mileage today and experience the difference in your vehicle’s performance.

Product Features:

• 10x better high temperature performance – as measured in seq iiih engine test vs. api sp limit
• 6x better wear protection – as measured in seq iva test vs. latest test limit
• From the makers of the No. 1 high mileage brand
• Meets api sp/sn plus, ilsac gf-6, gm 6094m
• Castrol edge offers engine oils that meet oem specification approvals or licenses that cover over 97.3% of the us car parc.
• Available in the following grades: 5w-20, 5w-30, 10w-30, and 10w-40
• Try castrol edge high mileage today

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
• Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• High Mileage Protection: Valvoline Full Synthetic High Mileage Engine Oil is specially designed to protect engines with over 75,000 miles against wear, friction, heat, and deposits, ensuring a longer lifespan for your vehicle.

The intelligent molecules in Castrol GTX MAGNATEC are what set it apart from other engine oils. These ultra-refined molecular components cling to the engine throughout all driving conditions, even when the engine is off. When the engine stops, oil drains back to the sump, but the intelligent molecules in Castrol GTX MAGNATEC don’t. They cling to critical engine parts like a magnet, providing an extra layer of protection from the start and throughout warm-up. Only Castrol GTX Magnatec is uniquely formulated to provide instant protection from the moment of start.

Product Features:

• Cling to critical engine parts when the oil drains down
• Add a layer of protection during warm-up and beyond
• Dramatically reduce engine wear
• Leave critical engine parts 4X smoother