1994 Mazda 626 Transmission Parts

Name: Ultra Grey® Rigid High-Torque RTV Silicone Gasket Maker
Brand: Permatex
SKU: 3K200329086PMX
Price: 12.39 USD

Below you will find various in-demand Mazda Transmission Parts, components and accessories for your 1994 626. Advance Auto Parts has popular 626 parts like Transmission Mounts, Automatic Transmission Parts, Transmission Seals and more. You’ll also find aftermarket and OEM Transmission Parts for other 626 model years including 1993, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 and more. Select a category of 1994 Mazda 626 Transmission Parts below and start saving instantly.

Popular 1994 Mazda 626 Transmission Parts Categories

OE Transmission Coolers

Transmission Solenoids

Automatic Transmission Shift Solenoids

Transmission Pan Gaskets

Transmission Mounts

Transmission Master Repair Kits

Back Up and Neutral Safety Switches

Transmission Rebuild Kits

Transmission Oil Pan Gaskets

Powertrain Control Module Relays

Speed Sensors

Automatic Transmission Output Shaft Seals

Automatic Transmission Gear Position Sensors

Transmission Seals and O-rings

Torque Converter Seals

Manual Transmission Output Shaft Seals

Manual Transmission Drive Axle Seals

Transmission Bands

Automatic Transmission Drive Axle Seals

Remanufactured Automatic Transmissions

Input Shaft Seals

Essential Transmission Parts for 1994 Mazda 626s

from

$12.39

3.5 oz. tube, carded – OEM specified. Permatex® Ultra silicones were developed to meet today’s technology changes. Sensor-safe, low odor, noncorrosive.

Product Features:

Outstanding oil resistance and joint movement tolerance
Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones.
Temperature range -65F to 500F (-54°C to 260°C) intermittent
Resists auto and shop fluids and vibration Suggested Applications: Valve covers, oil pans, transmission pans, intake manifold end seals, timing covers, water pumps, thermostat housings. DIRECTIONS :
For best results, clean and dry all surfaces with a residue-free solvent such as Permatex® Brake and Parts Cleaner.
Cut nozzle to desired bead size. Gaskets are best formed using a 1/16 to 1/4 (2 to 6 mm) bead.
Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes.
Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
Allow to dry for one hour then re-tighten 1/4 to 1/2 turn.
Silicone will skin over in one hour and fully cure in 24 hours under normal conditions.
Allow more time for cold or very dry conditions.
Clean uncured silicone from hands, tools and clothing with Permatex® Fast Orange® Wipes or Fast Orange® Hand Cleaner. NOTE: Not recommended for use on head gaskets or on parts in contact with gasoline. TECHNICAL DATA SHEET

from

$175.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$76.99

Shift Solenoid

from

$52.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Our parts are 100% tested to verify both mechanical and electrical switching performance
Decades of industry leading research and development focused on meeting the technician’s needs
Robust design and high grade materials meet the stringent demands of today’s service professional
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$22.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$46.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$39.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$4.99

Product Features:

Brand may vary by location

from

$203.99

from

$17.99

AT SEAL DRIVE AXLE

from

$4.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$27.99

AUTO TRANS BAND

from

$14.39

Automatic Transmission Front Seal

from

$2450.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$1882.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$388.99

AT MASTER REPAIR KIT

from

$119.99

This Basic Rebuild Kit contains a complete gasket Kit and friction set. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.

Product Features:

Does not include steels or filter

from

$19.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 89-92; MAZDA 88-92;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1988-1992
Weight approx: 2 Lbs

from

$40.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 93-97; MAZDA 93-02;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1993-2002
Weight approx: 1 Lbs

from

$76.99

AT CONTR SOLENOID

from

$164.99

AT CONTR SOLENOID

from

$38.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$8.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$4.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$14.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Upgrade your 1994 Mazda 626 with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 1994 Mazda 626, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mazda or enhancing its overall performance, Transmission Parts are key to keeping your 626 functioning at its best. At Advance Auto Parts, we offer a wide selection of 59 Transmission Parts for the 1994 Mazda 626, designed to meet your needs without breaking the bank. From Transmission Mount replacements to Automatic Transmission Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1994 Mazda 626 at great prices. Our Transmission Parts inventory for this model ranges from just $3.49 to $2,538.00, with an average price of $138.31. Our 59 Transmission Parts in stock come from 17 trusted brands, so you’re sure to find the right part for your 1994 Mazda 626 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1994 Mazda 626, we stock popular OEM and aftermarket Transmission Parts from top names like Permatex, Imperial, National, and more. Permatex Transmission Parts start at just $6.99 and boast an impressive 5 stars average rating from customers. Imperial and National also bring quality to the table, with Transmission Parts available starting at $4.99, and at an average 4 stars rating. With 964 customer reviews and counting, our 1994 Mazda 626 Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1994 Mazda 626 is always ready to roll. We’re committed to providing you with everything you need to keep your 626 in top shape, all in one place. Start shopping confidently below for your 1994 Mazda 626!

Best-Selling Transmission Mounts for 1994 Mazda 626s

Enhance the driving experience in your Mazda with 8 quality Transmission Mount components, starting at $17.99.

show more show less

from

$40.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 93-97; MAZDA 93-02;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1993-2002
Weight approx: 1 Lbs

from

$35.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 93-97; MAZDA 93-02;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1993-2002
Weight approx: 5 Lbs

from

$70.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 94-97; MAZDA 94-02;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1994-2002
Weight approx: 7 Lbs

from

$90.02

Engine Mount

from

$83.24

Marmon Ride Control (formerly DEA Products) has been a trusted manufacturer of transmission mounts in the aftermarket industry for over 30 years. Marmon Ride Control uses the highest quality of raw materials available, and thoroughly tests their products with state-of-the-art lab equipment to ensure that you’ll be installing a mount that will meet or exceed your original mount’s specifications.

Product Features:

USA Development and OEM laboratory – 14 OEM Engineers
Design Solutions and Installation Enhancements to Failing OEM designs
Complete Factory Testing and Vehicle Verification Resources

from

$40.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Mount type is an exact match to OE (hydraulic, vacuum, active, etc.)
Premium materials and construction to dampen vibration
Additional factory parts included where applicable
High quality construction with premium materials for durability
Application specific for this vehicle

from

$33.99

Mount type is an exact match to OE (hydraulic, vacuum, active, etc.)
Premium materials and construction to dampen vibration
Additional factory parts included where applicable
High quality construction with premium materials for durability
Application specific for this vehicle

from

$17.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 93-97; MAZDA 93-02;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1993-2002
Weight approx: 1 Lbs

Most Popular 1994 Mazda 626 Automatic Transmission Parts

Customize your Mazda with 9 Automatic Transmission Parts products like Transmission Solenoids, Automatic Transmission Shift Solenoids, and Transmission Bands, all priced under $2,538.00.

show more show less

from

$2538.00

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.

Product Features:

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$1939.99

While we do not sell this item online, it can be ordered from one of our 3,500 store locations. Please see our Store Locator to find the store nearest you. Please note: Online promotions and discounts are not applicable to this item. Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road. We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions. Each Moveras transmission is produced in a World Class manufacturing facility. Our entire process has been developed from scratch, utilizing LEAN manufacturing principles. Our transmissions are produced in a Clean Room environment. Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

Product might not be available in all states due to local laws.

from

$1882.99

Product might not be available in all states due to local laws.

from

$689.99

AT CONTR SOLENOID

from

$164.99

AT CONTR SOLENOID

from

$76.99

AT CONTR SOLENOID

from

$76.99

Shift Solenoid

from

$37.99

AUTO TRANS BAND

from

$27.99

AUTO TRANS BAND

Top Picks for 1994 Mazda 626 Transmission Seals

Upgrade Mazda 626s with top-quality Transmission Seals parts, including 11 OEM and aftermarket selections for your 1994 model.

show more show less

from

$13.79

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$22.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$4.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$13.29

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$3.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$6.29

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$5.79

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$17.99

AT SEAL DRIVE AXLE

from

$20.33

AT Pump Seal

from

$14.39

Automatic Transmission Front Seal

from

$11.24

AT Output Shaft Seal

In-Demand Automatic Transmission Pan and Gaskets for 1994 Mazda 626s

Select from 8 premium Automatic Transmission Pan and Gaskets parts for your 1994 Mazda 626, with prices ranging from $6.99 to $32.99.

show more show less

from

$11.49

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$6.99

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$19.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$16.99

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 90 minutes

from

$14.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$28.49

Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:

Ideal for rigid cast aluminum parts
Meets OEM Specifications
Sensor safe & non-corrosive
Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
Blowout resistant, allowing leakproof gaskets to be made in just one minute
Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.

from

$32.99

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

Designed specially for high-torque and high vibration applications
Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
OEM specified
Low-odor, non-corrosive formula
Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

from

$12.39

3.5 oz. tube, carded – OEM specified. Permatex® Ultra silicones were developed to meet today’s technology changes. Sensor-safe, low odor, noncorrosive.

Product Features:

Outstanding oil resistance and joint movement tolerance
Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones.
Temperature range -65F to 500F (-54°C to 260°C) intermittent
Resists auto and shop fluids and vibration Suggested Applications: Valve covers, oil pans, transmission pans, intake manifold end seals, timing covers, water pumps, thermostat housings. DIRECTIONS :
For best results, clean and dry all surfaces with a residue-free solvent such as Permatex® Brake and Parts Cleaner.
Cut nozzle to desired bead size. Gaskets are best formed using a 1/16 to 1/4 (2 to 6 mm) bead.
Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes.
Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
Allow to dry for one hour then re-tighten 1/4 to 1/2 turn.
Silicone will skin over in one hour and fully cure in 24 hours under normal conditions.
Allow more time for cold or very dry conditions.
Clean uncured silicone from hands, tools and clothing with Permatex® Fast Orange® Wipes or Fast Orange® Hand Cleaner. NOTE: Not recommended for use on head gaskets or on parts in contact with gasoline. TECHNICAL DATA SHEET

Most Sold 1994 Mazda 626 Transmission Cooler and Parts

Explore our best-selling Mazda parts for the 1994 626 among 10 OEM and aftermarket options starting from $39.99.

show more show less

from

$85.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool® plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

from

$59.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems

from

$54.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$39.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$81.99

Product Features:

Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 30,000 lbs.; towing up to 10,000 lbs.

from

$80.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design

from

$52.99

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$81.99

High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion

from

$67.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

Top-Rated Transmission Parts Brands For Your 1994 Mazda 626

Shop for the best-rated brands offering Transmission Parts and other products for your 1994 Mazda 626s. Below you’ll find some of our best rated Transmission Parts from Permatex, Imperial, and National, and more. Transmission Parts from these brands that fit a 1994 626 start at just $4.99 and are rated as high as 5 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 1994 Mazda 626 Transmission Parts

When it comes to maintaining or upgrading your 1994 Mazda 626, using quality Transmission Parts is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Transmission Parts, specifically designed for the 1994 Mazda 626. With over 7 Permatex brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $18.48. Plus, with over 106 customer reviews and an average rating of 5 stars, you can trust that our Permatex Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$32.99

This product is not rated

Ultra Grey RTV Gasket Maker (9.5 oz.)

“”

from
$28.49

This product is not rated

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

“”

from
$16.99

This product is not rated

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ

“”

Popular Imperial 1994 Mazda 626 Transmission Parts

Imperial auto parts is one of the highest quality Transmission Part brands in the market. Any 1994 Mazda 626 owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 1994 626, Advance Auto Parts carries a full inventory of 10 Imperial Transmission Parts. Plus you will be keeping your Mazda in peak condition while saving money because prices on these Imperial Transmission Parts range from $39.99 to $85.99, plus, with more than 145 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from
$85.99

(4)

High Performance Transmission Oil Cooler

“good quality,easy to install.”

from
$73.99

(7)

Maxi-Kool® XL Transmission Oil Cooler

“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”

from
$67.99

This product is not rated

High Performance Transmission Oil Cooler

“”

FAQs for 1994 Mazda 626 Transmission Parts

Which Transmission Parts are best-sellers for 1994 Mazda 626s?

Out of 59 Transmission Parts that fit 1994 Mazda 626s, the following parts are the top sellers:

Sensor-Safe, High-Torque RTV Silicone Gasket Maker (7160017) – $11.49
Econo-Kool® Transmission Oil Cooler (6014720) – $39.99
Sensor-Safe, High Torque RTV Silicone Gasket Maker (99997948) – $6.99

What’s the price range for 1994 Mazda 626 Transmission Parts?

Transmission Part prices for the 1994 Mazda 626 start at $3.49 and go up to $2,538.00 for the most premium parts.

What’s the average price of a Transmission Part for a 1994 Mazda 626?

The average price for Transmission Parts for the 1994 Mazda 626 is $138.31. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Mazda 626 model years?

Yes, we currently carry Transmission Parts for 23 model years of Mazda 626s between 1979 and 2002. Transmission Parts are bought most frequently for the following model years: 2002, 2001, 2000, 1999, 1998, 1997, 1996, 1995, and 1993.

What are the cheapest Transmission Parts for my 1994 Mazda 626?

The cheapest 1994 Mazda 626 Transmission Parts we carry in stock are:

Oil Seal (15440113) – $3.49
Multi Purpose Seal (18442598) – $4.99
Multi Purpose Seal (15440010) – $5.79
Oil Seal (5442788) – $6.29
Sensor-Safe, High Torque RTV Silicone Gasket Maker (99997948) – $6.99

What are the top-rated Transmission Parts that fit the 1994 Mazda 626?

Out of 964 reviews by customers, our 1994 Mazda 626 Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1994 Mazda 626 and their top-rated products:

Transmission Seals
- Multi Purpose Seal (18444899) – $13.79
- Multi Purpose Seal (18442598) – $4.99
- Multi Purpose Seal (15440014) – $22.99
Automatic Transmission Pan and Gaskets
- Multi Purpose Seal (18444899) – $13.79
- Multi Purpose Seal (18442598) – $4.99
- Multi Purpose Seal (15440014) – $22.99
Transmission Cooler and Parts
- Multi Purpose Seal (18444899) – $13.79
- Multi Purpose Seal (18442598) – $4.99
- Multi Purpose Seal (15440014) – $22.99

What types of Transmission Parts do you sell for my 1994 Mazda 626?

As of 2/5/25, these are some of the most in-demand types of Transmission Parts for a 1994 Mazda 626:

Can I get help with 1994 Mazda 626 Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mazda Transmission Parts and more.

What is your return policy for Mazda 626 Transmission Parts?

Advance Auto Parts keeps returns simple. For new Mazda 626 Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1994 Mazda 626 Transmission Parts

Permatex – Ultra Grey® Rigid High-Torque RTV Silicone Gasket Maker (Part No.3K200329086PMX)

Carquest Premium – Neutral Safety Switch (Part No.SAC4096)

ATP – Shift Solenoid (Part No.NE-20)

Carquest – Neutral Safety Switch (Part No.S26100)

National – Multi Purpose Seal (Part No.3622)

Carquest Premium – Multi Purpose Relay (Part No.RAA1353)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242009)

Driveworks – Oil Seal (Part No.S-224235)

Carquest Premium – Vehicle Speed Sensor (Part No.SNA1253)

ATP – AT SEAL DRIVE AXLE (Part No.FO-30)

National – Multi Purpose Seal (Part No.221620)

ATP – AUTO TRANS BAND (Part No.FX-129)

NOK – Automatic Transmission Front Seal (Part No.J5072307774NOK)

Shift Pro by ETE – CD4E Automatic Transmission Assembly (Part No.T161907)

Moveras – G4AFEL – Automatic Transmission (Part No.M01580)

ATP – AT MASTER REPAIR KIT (Part No.FM-45)

Pro-King – Automatic Transmission Basic Rebuild Kit (Part No.KB-501)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.8516)

Anchor – Transmission Mount: Center, 1 Piece (Part No.9087)

ATP – AT CONTR SOLENOID (Part No.NE-19)

ATP – AT CONTR SOLENOID (Part No.NE-13)

National – Shaft Repair Sleeve (Part No.99189)

Driveworks – Oil Seal (Part No.S-710446)

Felpro – Automatic Transmission Oil Pan Gasket (Part No.TOS 18712)

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18729)

Anchor – Transmission Mount: Center, 1 Piece (Part No.9087)

Anchor – Transmission Mount: Left, 1 Piece (Part No.8457)

Anchor – Transmission Mount: Left, 1 Piece (Part No.8691)

Autopart International Inc – Engine Mount (Part No.A7000566775API)

DEA – Transmission Mount (Part No.J6000159125DEA)

Beck/Arnley – Transmission Mount (Part No.104-1344)

Beck/Arnley – Transmission Mount (Part No.104-1346)

Anchor – Transmission Mount: Center, 1 Piece (Part No.9082)

Spartan – Automatic Transmission Assembly; Ford FWD CD4E 4-Speed (Part No.3052A-F67)

Moveras – CD4E – Automatic Transmission (Part No.M00227)

Moveras – G4AFEL – Automatic Transmission (Part No.M01046)

ATP – AT CONTR SOLENOID (Part No.NE-44)

ATP – AT CONTR SOLENOID (Part No.NE-13)

ATP – AT CONTR SOLENOID (Part No.NE-19)

ATP – Shift Solenoid (Part No.NE-20)

ATP – AUTO TRANS BAND (Part No.FX-127)

ATP – AUTO TRANS BAND (Part No.FX-129)

National – Multi Purpose Seal (Part No.710396)

National – Multi Purpose Seal (Part No.3622)

National – Multi Purpose Seal (Part No.221620)

National – Multi Purpose Seal (Part No.2007N)

Driveworks – Oil Seal (Part No.S-2007N)

Driveworks – Oil Seal (Part No.S-223543)

National – Multi Purpose Seal (Part No.223543)

ATP – AT SEAL DRIVE AXLE (Part No.FO-30)

SKF – AT Pump Seal (Part No.J5073366520SKF)

NOK – Automatic Transmission Front Seal (Part No.J5072307774NOK)

NOK – AT Output Shaft Seal (Part No.J2557244518NOK)

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18729)

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)

Permatex – Ultra Grey® Rigid High-Torque RTV Silicone Gasket Maker (Part No.3K200329086PMX)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (Part No.243006)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242010)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242009)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243012)

Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)