1994 GMC K3500 Transmission Parts

Below you will find various in-demand GMC Transmission Parts, components and accessories for your 1994 K3500. Advance Auto Parts has popular K3500 parts like Transmission Seals, Transmission Cooler and Parts, Automatic Transmission Parts and more. You’ll also find aftermarket and OEM Transmission Parts for other K3500 model years including 1990, 1991, 1992, 1993, 1995, 1996, 1997, 1998, 1999 and more. Select a category of 1994 GMC K3500 Transmission Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1994 GMC K3500 Transmission Parts Categories

Gear Shift Levers

Transmission Torque Converters

OE Transmission Coolers

Manual Transmission Differential Bearings

Gear Shift Rod Bushings

Master and Slave Cylinder Assemblies

Transmission Solenoids

Transmission Oil Cooler Lines

Countershaft Bearings

Manual Transmission Output Shaft Bearings

Automatic Transmission Torque Converter Clutch Solenoids

Back Up Lamp Switches

Transmission Pan Gaskets

Automatic Transmission Drain Plugs

Automatic Transmission Line Connectors

Pinion Bearings

Transmission Mounts

Transmission Master Repair Kits

Transmission Oil Pressure Switches

Transmission Rebuild Kits

Transmission Oil Pan Gaskets

Automatic Transmission Wiring Harness

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Speed Sensors

Transmission Bushings

Detent Cables

Pinion Seals

Neutral Safety Switch Connectors

Transmission Seals and O-rings

Back Up Light Relays

Back Up Light Switch Connectors

Manual Transmission Bearing and Seal Overhaul Kits

Torque Converter Seals

Extension Housing Seals

Manual Transmission Output Shaft Seals

Automatic Transmission Torque Converter Clutch Valve Solenoid Connectors

Manual Transmission Main Shafts

Transmission Shift Kits

Input Shaft Bearings

Back Up Lamp Connectors

Manual Transmission Gear Teeth

Automatic Transmission Selector Shaft Seals

Automatic Transmission Flexplate Mounting Bolts

Automatic Transmission Output Shaft Bearings

Shift Shaft Seals

Manual Transmission Extension Housing Seals

Automatic Transmission Oil Pump O-Rings

Manual Transmission Synchro Springs

Manual Transmission Shift Fork Inserts

Manual Transmission Synchro Keys

Remanufactured Automatic Transmissions

Manual Transmission Synchro Assemblies

Manual Transmission Input Shafts

Manual Transmission Synchro Sleeves

Torque Converter Bearings

Manual Transmission Drain Plugs

Manual Transmission Output Shaft Seal Kits

Essential Transmission Parts for 1994 GMC K3500s

from

$88.99

AT CONTR SOLENOID

from

$50.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$13.49

A/T FLYWHEEL BOLT

from

$8.99

Made of quality materials, this automatic transmission oil cooler line connector matches the fit and function of a damaged original equipment connector to restore leak-free performance between the transmission and the oil cooler.

Product Features:

Quality replacement – this transmission cooler connector matches the fit and function of the original equipment connector
Durable construction – this oil cooler line connector is made of quality materials for a precise fit and leak-free durability
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Ideal shop supply – this connector is recommended to have on hand any time service is being performed on the transmission oil cooler line

from

$148.99

ATHARNESS VSS REPR

from

$35.99

You can forget about the problem of shearing a torque converter bolt after you install these super strong 200,000 PSI gems. They are designed for each specific application and provide the optimum grip. Kits come with hardened parallel ground washers.

Product Features:

Super Strong, Rated At 200,000 PSI
Kits Come With Hardened Parallel Ground Washers
Made In USA
0.590″ Underhead Length
M10 X 1.5 Thread Size
Set of 6

from

$9.99

This transmission drain plug is designed to match the dimensions and function of the original plug on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this transmission drain plug matches the dimensions and function of the factory hardware on specified vehicle years, makes and models
Ideal solution – this drain plug is a reliable replacement for an original part that is damaged or lost during service
Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
Quality assured – backed by a team of product experts in the United States and more than a century of automotive experience

from

$44.99

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

from

$2453.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). [Torque Converter] All of converters are dynamic balanced All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Product might not be available in all states due to local laws.

from

$65.99

AT PRESS SW MANIFOLD

from

$47.99

All parts are calibrated and tested to match the OE part
Not impacted by temperature changes and provide robust, long-lasting sensor protection
Designed digital output for maximum signal to noise ratio

from

$17.79

Product Features:

Brand may vary by location

from

$46.99

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$24.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Back Up Light Switch automatically activates the rear backup lights when the vehicle is shifted into reverse. This improved visibility for the driver and alerts other vehicles or pedestrians when the vehicle is reversing, reducing the risk of accidents. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$17.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$75.99

Stock depth chrome plated automatic transmission pans are complete with drain plug, washer and gasket. Matching dipsticks with tubes sold separately.

Product Features:

Stock depth and capacity
Chrome plated
Includes drain plug/washer/gasket

from

$899.99

Converter: Th350 Lock-Up 28-3200 Stall

from

$10.99

This brake pedal bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake pedal bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$9.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$36.99

REUSABLE AT PAN GSKT

from

$224.99

For modern, foot-operated clutches we offer hydraulic release systems that not only replace cable-actuated systems, they also fit into increasingly narrow engine compartments. Because there is no more friction from the cable, clutch wear is lowered dramatically while driving comfort improves.

from

$151.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 1-1/2″ x 12″ x 15 1/8″
Severe-duty transmission oil cooling applications
Towing with class “A” motor home or towing more than 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$67.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$83.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$26.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$51.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$62.99

This neutral safety switch connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this neutral safety switch connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$45.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Upgrade your 1994 GMC K3500 with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 1994 GMC K3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Transmission Parts are key to keeping your K3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 138 Transmission Parts for the 1994 GMC K3500, designed to meet your needs without breaking the bank. From Transmission Seal replacements to Transmission Cooler and Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1994 GMC K3500 at great prices. Our Transmission Parts inventory for this model ranges from just $3.99 to $2,458.00, with an average price of $246.62. Our 138 Transmission Parts in stock come from 25 trusted brands, so you’re sure to find the right part for your 1994 GMC K3500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1994 GMC K3500, we stock popular OEM and aftermarket Transmission Parts from top names like National, B & M, Imperial, and more. National Transmission Parts start at just $6.99 and boast an impressive 4.3 stars average rating from customers. B & M and Imperial also bring quality to the table, with Transmission Parts available starting at $47.99, and at an average 4.1 stars rating. With 1,124 customer reviews and counting, our 1994 GMC K3500 Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1994 GMC K3500 is always ready to roll. We’re committed to providing you with everything you need to keep your K3500 in top shape, all in one place. Start shopping confidently below for your 1994 GMC K3500!

Best-Selling Transmission Seals for 1994 GMC K3500s

Enhance the driving experience in your GMC with 19 quality Transmission Seal components, starting at $6.99.

show more show less

from

$16.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$12.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$11.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$8.99

AT SEL SHAFT SEAL

from

$24.49

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg F to 225 Deg F / -40 Deg C to 107 Deg C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$6.99

Product Features:

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$20.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$8.99

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$24.99

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

from

$17.79

Product Features:

Brand may vary by location

from

$6.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$31.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$14.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$6.99

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$8.99

AT EXT HOUSING SEAL

from

$153.99

ManTransBrg-SealKit

from

$40.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$22.99

AT EXT HOUSING SEAL

from

$14.49

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

Top Picks for 1994 GMC K3500 Automatic Transmission Parts

Upgrade GMC K3500s with top-quality Automatic Transmission Parts parts, including 21 OEM and aftermarket selections for your 1994 model.

show more show less

from

$7.99

ATP Detent Cable End repair damaged or bent end clips found on 1980-96 General Motors applications.

Product Features:

Saves money by allowing cable repair instead of replacement.
Easy to use

from

$10.99

Direct replacement – this brake pedal bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$66.99

AT CONTR SOLENOID

from

$8.99

AT OIL PUMP ORING

from

$11.99

AT FRT PUMP BUSHING

from

$61.99

ATP Automatic Transmission Control Solenoid (Lock-Up)

from

$23.49

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:

OE Replacement

from

$148.99

ATHARNESS VSS REPR

from

$88.99

AT CONTR SOLENOID

from

$48.99

AT/HARNESS VSS REPR

from

$2458.00

Our remanufactured transmissions have improved torque converters included with every transmission to eliminate the possibility of front seal leaks, vibration or premature bushing wear, All torque converters are tested for leaks, lock-up, concentricity & balance. Every fully remanufactured valve body, with complete system correction & recalibration kit, is tested independently & includes updated throttle valve, manual valve, 4-spool switch valve, pressure regulator valve & governor plugs for improved shifting, lubrication & performance. All wear-prone valves are restored to stringent specifications & vacuum tested to confirm proper function. Each remanufactured transmission is hot, cold, load & simulated road testing. All remanufactured transmissions are backed by the industry’s best, no-hassle nationwide warranty.

Product Features:

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$2453.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2453.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2453.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Product might not be available in all states due to local laws.

from

$2371.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2371.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2336.00

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$2094.99

While we do not sell this item online, it can be ordered from one of our 3,500 store locations. Please see our Store Locator to find the store nearest you. Please note: Online promotions and discounts are not applicable to this item. Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road. We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions. Each Moveras transmission is produced in a World Class manufacturing facility. Our entire process has been developed from scratch, utilizing LEAN manufacturing principles. Our transmissions are produced in a Clean Room environment. Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

Product might not be available in all states due to local laws.

from

$2069.99

Product might not be available in all states due to local laws.

from

$99.99

AT CONTR SOLENOID

from

$93.99

AT CONTR SOLENOID

In-Demand Transmission Mounts for 1994 GMC K3500s

Select from 1 premium Transmission Mounts parts for your 1994 GMC K3500.

show more show less

from

$23.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CADI 99-14; CHEV 82-19; GMC 82-14; HUMMER 03-10; ISUZU 06-08; OLDS 91-94;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1982-2019
Weight approx: 5 Lbs
STUDS: M10-150
INTERLOCK
BOLT HOLES CENTERLINE: 7.5 INCH / 190.5 MM

Most Sold 1994 GMC K3500 Transmission Bearings

Explore our best-selling GMC parts for the 1994 K3500 among 10 OEM and aftermarket options starting from $6.99.

show more show less

from

$14.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$23.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$8.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$6.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$32.49

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$18.79

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$44.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$46.99

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$20.79

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$15.49

We develop and produce high-quality roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Top-Rated Transmission Parts Brands For Your 1994 GMC K3500

Shop for the best-rated brands offering Transmission Parts and other products for your 1994 GMC K3500s. Below you’ll find some of our best rated Transmission Parts from National, B & M, and Imperial, and more. Transmission Parts from these brands that fit a 1994 K3500 start at just $6.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 1994 GMC K3500 Transmission Parts

When it comes to maintaining or upgrading your 1994 GMC K3500, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 1994 GMC K3500. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $12.32. Plus, with over 22 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $12.99

(13)

Multi-Purpose Seal

“Fixed my leak”

from $6.99

(5)

Multi-Purpose Seal

“This part was exactly the same as the part on my 2004 Trailblazer 4.2L, even had the same number stamped on it.”

from $16.99

(4)

Multi-Purpose Seal

“great item”

Popular B & M 1994 GMC K3500 Transmission Parts

B & M auto parts is one of the highest quality Transmission Part brands in the market. Any 1994 GMC K3500 owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1994 K3500, Advance Auto Parts carries a full inventory of 3 B & M Transmission Parts. Plus you will be keeping your GMC in peak condition while saving money because prices on these B & M Transmission Parts range from $47.99 to $362.99, plus, with more than 3 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $362.99

(1)

Automatic Shifter, Sport Shifter

“This is a sweetly made product with that hotrod look and feel.This shifter was easy to install and a knock out to drive.No down falls as far as I’m aw”

from $47.99

(1)

Shifter Accessories, Bracket and Lever Kit Fits TH400/TH350/TH250/200-4R/700R4

“Cable not perfectly straight. It is hard to believe as long as B&M and th400s have been around, that they do not line up better”

from $103.99

(1)

ShiftPlus, 4L60E and 4L80E

“the kit is amazing its a cheap and simple way to increase the shifting ability and performance of a stock transmission, a simple 2 wire install and u ”

FAQs for 1994 GMC K3500 Transmission Parts

Which Transmission Parts are best-sellers for 1994 GMC K3500s?

Out of 138 Transmission Parts that fit 1994 GMC K3500s, the following parts are the top sellers:

Transmission Mount: Rear, 1 Piece (5303486) – $23.49
Multi-Purpose Seal (18445466) – $16.99
Tapered Roller Bearing Cone (5052513) – $23.99

What’s the price range for 1994 GMC K3500 Transmission Parts?

Transmission Part prices for the 1994 GMC K3500 start at $3.99 and go up to $2,458.00 for the most premium parts.

What’s the average price of a Transmission Part for a 1994 GMC K3500?

The average price for Transmission Parts for the 1994 GMC K3500 is $246.62. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other GMC K3500 model years?

Yes, we currently carry Transmission Parts for 18 model years of GMC K3500s between 1979 and 1999. Transmission Parts are bought most frequently for the following model years: 1999, 1998, 1997, 1996, 1995, 1993, 1992, 1991, and 1990.

What are the cheapest Transmission Parts for my 1994 GMC K3500?

The cheapest 1994 GMC K3500 Transmission Parts we carry in stock are:

Oil Seal (5440149) – $3.99
ManTranSynchroSpring (12009332) – $3.99
ManTrans Cover Plug (12009313) – $3.99
Shift Fork Insert (12009733) – $3.99
TCaseShiftForkInsert (12008219) – $3.99

What are the top-rated Transmission Parts that fit the 1994 GMC K3500?

Out of 1,124 reviews by customers, our 1994 GMC K3500 Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1994 GMC K3500 and their top-rated products:

Automatic Transmission Pan and Gaskets
- Transmission Oil Pan Gasket 17 Bolt Hole One Piece Gasket (5992044) – $16.99
- EZ Drain Engine Oil Drain Plug: M12-1.75 Thread, 21 mm Head, 1 Pack (11953660) – $17.49
Transmission Cooler and Parts
- Transmission Oil Pan Gasket 17 Bolt Hole One Piece Gasket (5992044) – $16.99
- EZ Drain Engine Oil Drain Plug: M12-1.75 Thread, 21 mm Head, 1 Pack (11953660) – $17.49

What types of Transmission Parts do you sell for my 1994 GMC K3500?

As of 11/2/25, these are some of the most in-demand types of Transmission Parts for a 1994 GMC K3500:

Can I get help with 1994 GMC K3500 Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Transmission Parts and more.

What is your return policy for GMC K3500 Transmission Parts?

Advance Auto Parts keeps returns simple. For new GMC K3500 Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1994 GMC K3500 Transmission Parts

ATP – AT CONTR SOLENOID (Part No.JE-53)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-146)

ATP – A/T FLYWHEEL BOLT (Part No.ZX-2036)

Dorman – Transmission Line Connector (Part No.800-754)

ATP – ATHARNESS VSS REPR (Part No.JE-22)

ARP Auto Racing – For Use With General Motors, 0.590"L Under Head, 10Mm X 1.5 Thread, With Washers (Part No.230-7305)

Dorman – Transmission Drain Plug – M12-1.75 Pilot Point (sold by each) (Part No.090-208)

Delphi – ABS Wheel Speed Sensor (Part No.SS11512)

Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T4L80E6596T4)

ATP – AT PRESS SW MANIFOLD (Part No.JE-10)

Delphi – Vehicle Speed Sensor (Part No.SS10309)

Driveworks – Transfer Case Output Shaft Seal (Part No.S-4503N)

FAG US – Cone (Part No.K387-A)

Carquest Premium – Back Up Light Switch (Part No.SBA4462)

National – Multi-Purpose Seal (Part No.473468)

Mr. Gasket – Chrome Automatic Transmission Oil Pan with Drain Plug (Part No.9732)

Hays – Converter: Th350 Lock-Up 28-3200 Stall (Part No.97-1C28Q)

Dorman – Help – Brake and Clutch Bushings (Part No.74016)

Felpro – Transmission Oil Pan Gasket 13 Bolt Hole One Piece Gasket (Part No.TOS 18633)

ATP – REUSABLE AT PAN GSKT (Part No.JG-142)

LuK – Pre-Filled Hydraulic Clutch Release System (Part No.CRS015)

Imperial – Transmission Oil Cooler (Part No.241015)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Carquest Premium – Multi-Use Connector (Part No.PTA1688)

Carquest Premium – Multi-Use Connector (Part No.PTA1184)

Dorman – 4 Wire Multipurpose Connector (Part No.645-578)

Carquest Premium – Multi-Use Connector (Part No.PTA1142)

National – Multi-Purpose Seal (Part No.4934)

National – Multi-Purpose Seal (Part No.4583)

National – Multi-Purpose Seal (Part No.9449)

ATP – AT SEL SHAFT SEAL (Part No.SO-19)

National – Multi Purpose Seal (Part No.2286)

National – Multi Purpose Seal (Part No.8792S)

National – Multi-Purpose Seal (Part No.5208)

National – Multi-Purpose Seal (Part No.4598)

Motive Gear – Differential Pinion Seal (Part No.6808N)

Driveworks – Transfer Case Output Shaft Seal (Part No.S-4503N)

National – Multi Purpose Seal (Part No.714655)

National – Multi-Purpose Seal (Part No.2457)

Driveworks – Oil Seal (Part No.S-2286)

National – Multi-Purpose Seal (Part No.330385)

ATP – AT EXT HOUSING SEAL (Part No.JO-57)

USA Standard Gear – ManTransBrg-SealKit (Part No.70871)

National – Manual Transmission Output Shaft Seal (Part No.714670)

ATP – AT EXT HOUSING SEAL (Part No.JO-124)

National – Multi-Purpose Seal (Part No.714654)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243012)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.241018)

Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242016)

Imperial – Transmission Oil Cooler (Part No.241015)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-067)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-071)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-054)

ATP – Automatic Transmission Detent Cable End (Part No.YR-100)

Dorman – Help – Brake and Clutch Bushings (Part No.74016)

ATP – AT CONTR SOLENOID (Part No.JE-8)

ATP – AT OIL PUMP ORING (Part No.SO-21)

ATP – AT FRT PUMP BUSHING (Part No.CB-30)

ATP – ATP Automatic Transmission Control Solenoid (Lock-Up) (Part No.CE-1)

Pro-King – Automatic Transmission Solenoid (Part No.52-0211)

ATP – ATHARNESS VSS REPR (Part No.JE-22)

ATP – AT CONTR SOLENOID (Part No.JE-53)

ATP – AT/HARNESS VSS REPR (Part No.JE-15)

Spartan – Automatic Transmission Assembly; GM 4WD 4L80E 4-Spd (Part No.1670C-82)

Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T4L80E6594T4)

Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T4L80E7494T4)

Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T4L80E5794T4)

Shift Pro by ETE – 4L80E Automatic Transmission Assembly (Part No.T281103)

Shift Pro by ETE – 4L80E Automatic Transmission Assembly (Part No.T281108)

Spartan – Automatic Transmission Assembly; GM 4WD 4L80E 4-Spd (Part No.1670C-81)

Moveras – 4L80E – Automatic Transmission (Part No.M00040)