from

$8.99

New Goodmark Windshield Washer Tank Cap, Without Lettering

Product Features:

Without Lettering
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$14.99

New Goodmark Windshield Washer Tank Cap, For Use On Models With 5/32 Inch Washer Hose

Product Features:

For Use On Models With 5/32 Inch Washer Hose
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$6.49

This washer fluid reservoir cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this washer fluid reservoir cap is designed to match the fit and function of the original cap on specified vehicles
Restores functionality – reliable replacement for an original part that is missing, cracked or failed due to heat and fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$10.79

The plastic factory washer fluid cap on certain Chevy, GMC, Cadillac and Buick vehicles often fatigues at the hinge, eventually breaking away and sometimes getting lost completely. This Dorman OE FIX reservoir cap has been redesigned with a longer tether for greater flexibility to increase durability and prevent the same problem from happening again.

Product Features:

Improved design – this washer fluid reservoir cap has been redesigned to help prevent the failure-prone plastic tether from breaking in the future
Greater durability – this replacement reservoir cap features a longer tether that allows greater flexibility and reduces fatigue at the hinge point
Quality materials – this part is made from a tough but flexible polymer to ensure reliable performance and a long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$247.99

Our brand-new wiper motors are designed to match O.E. fitment and performance at a fraction of the cost. Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life. Load testing guarantees reliable performance you can trust.

Product Features:

Load testing ensures reliable performance.
Brushes are precisely designed to ensure armature and contacts are properly matched.
Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
Gears are designed with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage.
Magnets deliver the right amount of torque needed to withstand extreme weather conditions and to compensate for other worn components in the wiper motor transmission linkage.

from

$83.99

Using advanced re-engineering materials and processes, our remanufactured wiper motors meet all O.E. standards of performance and fitment. Every motor bearing is re-impregnated or replaced, as necessary, and all motor magnets are recharged. Lubrication is applied to the output gear to provide maximum load capacity and weak solder points are 100% reflowed. Each unit undergoes function testing against O.E. standards to ensure reliable performance.

Product Features:

Each unit has its main components tested or gauged against the O.E. standard. [Armature, Field, Bearing, Parking switch, or pulse board] ¿ Then the final product is tested for each of its functions on the vehicle.
Each unit has its main components tested or gauged against the O.E. standard. [Armature, Field, Bearing, Parking switch, or pulse board] ┐ Then the final product is tested for each of its functions on the vehicle.
Every motor bearing is re-impregnated or replaced as needed.
Lubrication is applied to the output gear to provide maximum load capacity and long life.
Weak solder points are 100% reflowed to extend life expectancy.
Motor magnets are 100% recharged for performance and reliability.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$153.99

Using advanced re-engineering materials and processes, our remanufactured wiper motors meet all O.E. standards of performance and fitment. Every motor bearing is re-impregnated or replaced, as necessary, and all motor magnets are recharged. Lubrication is applied to the output gear to provide maximum load capacity and weak solder points are 100% reflowed. Each unit undergoes function testing against O.E. standards to ensure reliable performance.

Product Features:

Each unit has its main components tested or gauged against the O.E. standard. [Armature, Field, Bearing, Parking switch, or pulse board] ¿ Then the final product is tested for each of its functions on the vehicle.
Each unit has its main components tested or gauged against the O.E. standard. [Armature, Field, Bearing, Parking switch, or pulse board] ┐ Then the final product is tested for each of its functions on the vehicle.
Every motor bearing is re-impregnated or replaced as needed.
Lubrication is applied to the output gear to provide maximum load capacity and long life.
Weak solder points are 100% reflowed to extend life expectancy.
Motor magnets are 100% recharged for performance and reliability.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$99.99

Using advanced re-engineering materials and processes, our remanufactured wiper motors meet all O.E. standards of performance and fitment. Every motor bearing is re-impregnated or replaced, as necessary, and all motor magnets are recharged. Lubrication is applied to the output gear to provide maximum load capacity and weak solder points are 100% reflowed. Each unit undergoes function testing against O.E. standards to ensure reliable performance.

Product Features:

Each unit has its main components tested or gauged against the O.E. standard. [Armature, Field, Bearing, Parking switch, or pulse board] ¿ Then the final product is tested for each of its functions on the vehicle.
Each unit has its main components tested or gauged against the O.E. standard. [Armature, Field, Bearing, Parking switch, or pulse board] ┐ Then the final product is tested for each of its functions on the vehicle.
Every motor bearing is re-impregnated or replaced as needed.
Lubrication is applied to the output gear to provide maximum load capacity and long life.
Weak solder points are 100% reflowed to extend life expectancy.
Motor magnets are 100% recharged for performance and reliability.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$29.99

Rain-X Latitude Water Repellency 2-in-1 wiper blades provide an innovative solution to both clear and repel the elements for ultimate driving visibility. These wipers also treat your windshield with a water repelling coating so water magically beads up and rolls away while you drive.

Product Features:

This 2-IN-1 wiper blade + rain repellent clears and repels the elements for ultimate driving visibility
Rain-X Latitude Water Repellency wiper blades apply a patented Rain-X water repellent coating to your windshield
The patented universal adapter is easy to use and fits 96% of vehicles – install at home in minutes
All-Weather Performance – the synthetic blend rubber squeegee can withstand extreme weather conditions for enhanced durability

from

$20.99

The Rain-X® Vision® Wiper Blade features Beam-style blade technology that delivers ideal pressure distribution, and curved design that offers a smooth wipe. When the weather takes a turn for the worse, make sure your windshield stays clear for optimal visibility with this Rain-X® Vision® Beam-Style Wiper Blade. The wiper blade is made with graphite-coated rubber to reduce friction and noise when wiping.

Product Features:

Rain-X Beam Blade Technology curved to provide a smooth wipe
Aerodynamic styling with graphite coating for reduced friction and noise
All weather performance perfect for all seasons
No end caps on blade preventing ice scrapers from catching in inclement weather

from

$22.99

TRICO Flex is a step up from the average, conventional blade into a standard beam blade. Durable, all-weather blade that comes with our Memory Curve Steel for optimal fit specific to modern day curved windshields.

Product Features:

SWIFT Easy Connection Technology offers quick and easy wiper replacement
Tested to perform over 1.5 million cycles
Twin-point coupler delivers constant, even pressure across the entire windshield.

from

$39.99

Rain-X Silicone AdvantEdge features a precision engineered silicone rubber squeegee that is 2X longer lasting than traditional rubber squeegees. Rain-X Silicone AdvantEdge rubber is specially formulated for use in wiper blades to provide ultimate durability and extreme weather performance.

Product Features:

The Rain-X Silicone AdvantEdge squeegee is proven to last 2X longer than traditional rubber squeegees and features Climate Defense Technology which protects the squeegee from long-term exposure to ozone, UV rays, snow, and ice
The resilient silicone rubber squeegee provides superior wipe quality in the most extreme temperatures and inclement weather conditions – it will not crack in the heat or freeze in the cold
Climate Defense Technology acts as a safeguard against windshield wiper fluid, oil, salt spray, road grime and other elements encountered while driving, which can negatively affect the performance of your wiper blades
Advanced spring beam technology hugs the curvature of the windshield for a smooth, quiet wipe. Wipe quality tested to 1.5 million cycles, based on third party testing.
The InstalLock system is an all-in-one adapter system that allows for a quick and secure installation on the most popular and specialty vehicle arms

from

$27.99

TRICO Onyx is a robustly engineered high-wind beam wiper blade with a patented swept-wing spoiler that slices through wind speeds in excess of 135mph (220kph) caused by crosswinds, buffeting truck winds and general traffic turbulence. Available exclusively at Advance Auto Parts.

Product Features:

VorTec aerofoil converts wind force for maximum windshield contact.
HighGlide treated rubber element for a smoother, quieter wipe.
Robust superstructure for durable all-weather performance.

from

$53.99

Product Features:

Universal design to fit most washer pumps
Does not include reservoir
GM mounting kit

from

$124.99

Product Features:

Engineered to match original equipment washer pumps
Designed to fit original windshield washer pump
Includes cover plate
3 nozzles

from

$42.99

Product Features:

Universal designed to fit most washer pumps
Includes Reservoir
Includes all mounting hardware

from

$172.99

Using advanced re-engineering materials and processes, CARQUEST Wiper Motors meet all O.E. standards of performance and fitment. Every motor bearing is re-impregnated or replaced, as necessary, and all motor magnets are recharged. Lubrication is applied to the output gear to provide maximum load capacity and weak solder points are 100% reflowed. Each unit undergoes function testing against O.E. standards to ensure reliable performance.

Product Features:

Each unit has its main components tested or gauged against the O.E. standard. (Armature, Field, Bearing, Parking switch, or pulse board) – Then the final product is tested for each of its functions on the vehicle.
Every motor bearing is re-impregnated or replaced as needed.
Lubrication is applied to the output gear to provide maximum load capacity and long life.
Weak solder points are 100% reflowed to extend life expectancy.
Motor magnets are 100% recharged for performance and reliability.

from

$118.99

Product Features:

Engineered to match original equipment washer pumps
Designed to fit original windshield washer pump
2 blade electrical connection
2 nozzles