1993 Mazda B2200 Drivetrains

Name: 2-Piece Steel Driveshaft Assembly (OE Fix)
Brand: Dorman
SKU: 936-269
Price: 741.99 USD

Below you will find various in-demand Mazda Drivetrains, components and accessories for your 1993 B2200. Advance Auto Parts has popular B2200 parts like Drive Shafts and Axles, CV Axles and Joints, Transfer Cases and more. You’ll also find aftermarket and OEM Drivetrains for other B2200 model years including 1982, 1983, 1984, 1987, 1988, 1989, 1990, 1991, 1992 and more. Select a category of 1993 Mazda B2200 Drivetrains below and start saving instantly.

Popular 1993 Mazda B2200 Drivetrains Categories

Differential Oil

Pinion Shaft Bearings

Center Support Bearings

Drive and Prop Shaft Assemblies

Differential Bearings

OE CV Boot Kits

Differential Pinion Pilot Bearings

Axle Shaft Bearings

Differential Bearing Kits

Front Differential Pinion Bearings

CV Quick Boot Kits

Transfer Case Output Shaft Bearings

Input Shaft Seals

Essential Drivetrains for 1993 Mazda B2200s

from

$741.99

The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance.

Product Features:

Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$666.99

Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$10.29

Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. Idemitsu is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. Idemitsu application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Advanced anti-wear technology provides maximum protection to gears and bearings
Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Advanced anti-wear technology provides maximum protection to gears and bearings

from

$19.99

Mobil 1 Synthetic Gear Lubricant LS 75W-90 is a supreme, multi-purpose automotive gear lubricant that helps to provide exceptional thermal stability and resistance to high temperature oxidation, extending gear life due to minimal deposits. Helps to deliver outstanding protection against low speed/high torque wear with the capability to handle severe driving conditions while delivering smooth efficient performance. Mobil 1 Synthetic Gear Lubricant LS provides exceptional shear stability, corrosion protection, and enhanced frictional properties. Compared to conventional hypoid gear lubricants, Mobil 1 LS 75W-90 performs exceptionally over a wide range of temperatures to reduce wear at start up. Mobil 1 gear lube helps to minimize leakage and reduce contamination while providing good resistance to foaming to maintain film strength for reliable lubrication. Meets or exceeds the requirements of the following industry specifications: API GL-5.

Product Features:

Mobil 1 LS synthetic automotive gear lubricant exceeds the highest level of performance requirements of modern passenger vehicles
Helps to provide exceptional thermal stability and resistance to high temperature oxidation and extend gear life due to minimal deposits
Delivers outstanding protection against low speed/high torque wear, handling severe driving conditions with smooth, efficient performance
Compared to conventional hypoid gear lubricants, performs exceptionally over a wide range of temperatures to reduce wear at start up
Provides exceptional shear stability, corrosion protection, and enhanced frictional properties
Manufacturer Part Number: 104361

from

$33.99

This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$31.99

Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$21.29

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$37.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$37.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$36.49

Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$27.99

Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint and Quick Boots come in halves.

Product Features:

Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$36.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using high-quality materials for durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$51.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using high-quality materials for durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$17.99

Product Features:

Brand may vary by location

from

$105.99

This drive shaft center bearing is designed to match the fit and function of the original bearing on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this drive shaft center bearing is designed to match the fit and function of the original bearing on specified vehicles
Restores functionality – this bearing is made to fit and fully restore part functionality after the original bearing fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$114.99

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to MAZDA 82-87;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1982-1987
Weight approx: 2 Lbs
INSERT
CUSHION WITH BEARING
WITHOUT FRAME

from

$10.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$15.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$137.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

MASTER KIT FORD 8.8″

from

$16.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$13.99

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$7.69

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Upgrade your 1993 Mazda B2200 with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 1993 Mazda B2200, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mazda or enhancing its overall performance, Drivetrains are key to keeping your B2200 functioning at its best. At Advance Auto Parts, we offer a wide selection of 26 Drivetrains for the 1993 Mazda B2200, designed to meet your needs without breaking the bank. From Drive Shafts and Axle replacements to CV Axles and Joints upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1993 Mazda B2200 at great prices. Our Drivetrains inventory for this model ranges from just $7.69 to $992.99, with an average price of $161.44. Our 26 Drivetrains in stock come from 8 trusted brands, so you’re sure to find the right part for your 1993 Mazda B2200 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1993 Mazda B2200, we stock popular OEM and aftermarket Drivetrains from top names like Mobil Oil, National, Motive Gear, and more. Mobil Oil Drivetrains start at just $19.99 and boast an impressive 4.9 stars average rating from customers. National and Motive Gear also bring quality to the table, with Drivetrains available starting at $16.99, and at an average 4.3 stars rating. With 1,102 customer reviews and counting, our 1993 Mazda B2200 Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1993 Mazda B2200 is always ready to roll. We’re committed to providing you with everything you need to keep your B2200 in top shape, all in one place. Start shopping confidently below for your 1993 Mazda B2200!

Best-Selling Drive Shafts and Axles for 1993 Mazda B2200s

Enhance the driving experience in your Mazda with 10 quality Drive Shafts and Axle components, starting at $7.69.

show more show less

from

$16.49

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to FORD 84-98;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1984-1998
Weight approx: 2 Lbs
BEARING ID / BORE: 1.2570 INCH / 32 MM
CENTERLINE: 2.00 INCH / 51 MM
MOUNT WIDTH: 5.90 INCH / 150 MM

from

$40.49

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to FORD 84-98;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1984-1998
Weight approx: 2 Lbs
BEARING ID / BORE: 1.1811 INCH / 30 MM
CENTERLINE: 2.20 INCH / 56 MM
MOUNT WIDTH: 6.00 INCH / 152 MM

from

$105.99

Direct replacement – this drive shaft center bearing is designed to match the fit and function of the original bearing on specified vehicles
Restores functionality – this bearing is made to fit and fully restore part functionality after the original bearing fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$992.99

Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$937.99

Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$741.99

Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$666.99

Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$109.99

Direct replacement – this drive shaft center bearing is designed to match the fit and function of the original bearing on specified vehicles
Restores functionality – this bearing is made to fit and fully restore part functionality after the original bearing fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$13.99

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$7.69

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Top Picks for 1993 Mazda B2200 Transfer Cases

Upgrade Mazda B2200s with top-quality Transfer Cases parts, including 3 OEM and aftermarket selections for your 1993 model.

show more show less

from

$15.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$17.99

Product Features:

Brand may vary by location

from

$10.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

In-Demand Differentials for 1993 Mazda B2200s

Select from 9 premium Differentials parts for your 1993 Mazda B2200, with prices ranging from $10.29 to $137.99.

show more show less

from

$19.99

Mobil 1 LS synthetic automotive gear lubricant exceeds the highest level of performance requirements of modern passenger vehicles
Helps to provide exceptional thermal stability and resistance to high temperature oxidation and extend gear life due to minimal deposits
Delivers outstanding protection against low speed/high torque wear, handling severe driving conditions with smooth, efficient performance
Compared to conventional hypoid gear lubricants, performs exceptionally over a wide range of temperatures to reduce wear at start up
Provides exceptional shear stability, corrosion protection, and enhanced frictional properties
Manufacturer Part Number: 104361

from

$16.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$137.99

MASTER KIT FORD 8.8″

from

$37.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$36.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using high-quality materials for durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$51.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using high-quality materials for durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$53.99

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$21.29

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$10.29

Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Advanced anti-wear technology provides maximum protection to gears and bearings
Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Advanced anti-wear technology provides maximum protection to gears and bearings

Top-Rated Drivetrains Brands For Your 1993 Mazda B2200

Shop for the best-rated brands offering Drivetrains and other products for your 1993 Mazda B2200s. Below you’ll find some of our best rated Drivetrains from Mobil Oil, National, and Motive Gear, and more. Drivetrains from these brands that fit a 1993 B2200 start at just $16.99 and are rated as high as 4.9 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Mobil Oil 1993 Mazda B2200 Drivetrains

When it comes to maintaining or upgrading your 1993 Mazda B2200, using quality Drivetrains is essential to ensure durability and a perfect fit. Mobil Oil ticks all of those boxes. We offer a wide selection of Mobil Oil Drivetrains, specifically designed for the 1993 Mazda B2200. With over 1 Mobil Oil brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $19.99. Plus, with over 448 customer reviews and an average rating of 4.9 stars, you can trust that our Mobil Oil Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $19.99

(448)

75W-90 Full Synthetic Gear Lubricant, Extends Gear Life, 1 Quart

“Worked great”

Popular National 1993 Mazda B2200 Drivetrains

National auto parts is one of the highest quality Drivetrain brands in the market. Any 1993 Mazda B2200 owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 1993 B2200, Advance Auto Parts carries a full inventory of 1 National Drivetrains. Plus you will be keeping your Mazda in peak condition while saving money because prices on these National Drivetrains range up to $16.99, plus, with more than 39 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from $16.99

(39)

Multi-Purpose Bearing

“Great bearings”

FAQs for 1993 Mazda B2200 Drivetrains

Which Drivetrains are best-sellers for 1993 Mazda B2200s?

Out of 26 Drivetrains that fit 1993 Mazda B2200s, the following parts are the top sellers:

Multi-Purpose Bearing (3275965) – $16.99
Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter (15830003) – $31.99
Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter (15830004) – $36.49

What’s the price range for 1993 Mazda B2200 Drivetrains?

Drivetrain prices for the 1993 Mazda B2200 start at $7.69 and go up to $992.99 for the most premium parts.

What’s the average price of a Drivetrain for a 1993 Mazda B2200?

The average price for Drivetrains for the 1993 Mazda B2200 is $161.44. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Mazda B2200 model years?

Yes, we currently carry Drivetrains for 8 model years of Mazda B2200s between 1982 and 1992. Drivetrains are bought most frequently for the following model years: 1992, 1991, 1990, 1989, 1988, 1987, 1984, 1983, and 1982.

What are the cheapest Drivetrains for my 1993 Mazda B2200?

The cheapest 1993 Mazda B2200 Drivetrains we carry in stock are:

Cup (50206003) – $7.69
Type HP Automatic Transmission Fluid , 1 Quart (11863923) – $10.29
Multi-Purpose Seal (18444910) – $10.99
Cone (50205944) – $13.99
Manual Transmission Input Shaft Seal (18445545) – $15.99

What are the top-rated Drivetrains that fit the 1993 Mazda B2200?

Out of 1,102 reviews by customers, our 1993 Mazda B2200 Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1993 Mazda B2200 and their top-rated products:

Differentials
- 75W-90 Full Synthetic Gear Lubricant, Extends Gear Life, 1 Quart (7070039) – $19.99
- Differential Master Bearing Kit – Timken (20640483) – $137.99
- Multi-Purpose Bearing (3275965) – $16.99
Drive Shafts and Axles
- 75W-90 Full Synthetic Gear Lubricant, Extends Gear Life, 1 Quart (7070039) – $19.99
- Differential Master Bearing Kit – Timken (20640483) – $137.99
- Multi-Purpose Bearing (3275965) – $16.99

What types of Drivetrains do you sell for my 1993 Mazda B2200?

As of 11/2/25, these are some of the most in-demand types of Drivetrains for a 1993 Mazda B2200:

Can I get help with 1993 Mazda B2200 Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mazda Drivetrains and more.

What is your return policy for Mazda B2200 Drivetrains?

Advance Auto Parts keeps returns simple. For new Mazda B2200 Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1993 Mazda B2200 Drivetrains

Dorman – 2-Piece Steel Driveshaft Assembly (OE Fix) (Part No.936-269)

Dorman – 1-Piece Steel Driveshaft Assembly (OE Fix) (Part No.936-254)

Idemitsu – Type HP Automatic Transmission Fluid , 1 Quart (Part No.10107-042F)

Mobil 1 – 75W-90 Full Synthetic Gear Lubricant, Extends Gear Life, 1 Quart (Part No.26101)

Dorman – C.V. Joint Solvent Welded Split Boot Kit Outer (Part No.614-256)

Dorman – Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter (Part No.614-001)

FAG US – Bearing – TRB (Tapered Roller Bearing) (Part No.KT5)

National – Shaft Repair Sleeve (Part No.99157)

National – Shaft Repair Sleeve (Part No.99199)

Dorman – Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter (Part No.614-002)

Dorman – Help – Universal C.V. Joint Boot Kit Outer (Part No.03680)

National – Multi-Purpose Bearing (Part No.32008)

National – Multi-Purpose Bearing (Part No.30306)

Driveworks – Tapered Roller Bearing (Part No.S-32206)

Dorman – Driveshaft Center Support Bearing (Part No.934-013)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.8550)

National – Multi-Purpose Seal (Part No.712011)

National – Manual Transmission Input Shaft Seal (Part No.710511)

Motive Gear – Differential Master Bearing Kit – Timken (Part No.R8.8RMKT)

National – Multi-Purpose Bearing (Part No.A-5)

FAG US – Cone (Part No.KLM48548)

FAG US – Cup (Part No.LM48510)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6061)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6062)

Dorman – Driveshaft Center Support Bearing (Part No.934-013)

Dorman – 2-Piece Steel Driveshaft Assembly (OE Fix) (Part No.936-271)

Dorman – 2-Piece Steel Driveshaft Assembly (OE Fix) (Part No.936-270)

Dorman – 2-Piece Steel Driveshaft Assembly (OE Fix) (Part No.936-269)

Dorman – 1-Piece Steel Driveshaft Assembly (OE Fix) (Part No.936-254)

Dorman – Driveshaft Center Support Bearing (Part No.934-014)

FAG US – Cone (Part No.KLM48548)

FAG US – Cup (Part No.LM48510)

Dorman – Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter (Part No.614-001)

Dorman – Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter (Part No.614-002)

Dorman – Help – Universal C.V. Joint Boot Kit Outer (Part No.03680)

Dorman – C.V. Joint Solvent Welded Split Boot Kit Outer (Part No.614-256)

National – Manual Transmission Input Shaft Seal (Part No.710511)

Driveworks – Tapered Roller Bearing (Part No.S-32206)

National – Multi-Purpose Seal (Part No.712011)

Mobil 1 – 75W-90 Full Synthetic Gear Lubricant, Extends Gear Life, 1 Quart (Part No.26101)

National – Multi-Purpose Bearing (Part No.A-5)

Motive Gear – Differential Master Bearing Kit – Timken (Part No.R8.8RMKT)

National – Shaft Repair Sleeve (Part No.99157)

National – Multi-Purpose Bearing (Part No.32008)

National – Multi-Purpose Bearing (Part No.30306)

FAG US – Bearing – TRB (Tapered Roller Bearing) (Part No.30208A)

FAG US – Bearing – TRB (Tapered Roller Bearing) (Part No.KT5)

Idemitsu – Type HP Automatic Transmission Fluid , 1 Quart (Part No.10107-042F)