1993 Lincoln Town Car Suspension Parts

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Product Features:

• Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
• Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
• All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

This air suspension compressor line repair kit is designed to match the original components required to repair the air suspension compressor on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Upgraded replacement – this air suspension compressor line repair union directly replaces the original with stronger material
• Increased durability – brass construction prevents future failures from original brittle plastic design
• Application specific – this union is made for a wide range of Ford, Lincoln and Mercury vehicles
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

Ride sagging? Don’t want to pay to repair the original air suspension? Convert to a high-quality conventional suspension with this air spring to coil spring conversion kit. Corrosion-resistant steel springs maintain a smooth ride without the cost.

Product Features:

• Alternative replacement – this air suspension delete kit replaces the original air suspension with a conventional suspension
• Cost-saving solution – ideal for older vehicles on which maintaining the original air suspension isn’t necessary or too costly
• Complete kit – includes all necessary hardware and components needed for conversion
• Thoroughly tested – parts underwent ride handling testing to ensure performance

This air suspension spring is designed to match the fit and function of the original spring on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this air suspension spring is designed to match the fit and function of the original spring on specified vehicle
• Restores functionality – reliable replacement for an original part that has failed due to internal rubber components that have torn or rotted
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

CONTROL ARM BUSHING

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Reduces vibration
• Torsional rubber bushings
• UV resistant
• No Squeak

SuspAirBag/Bellows

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

• REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
• EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
• CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
• CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
• IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
• Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
• 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
• Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.

Product Features:

• Available for import and domestic passenger cars
• Gas-charged unit
• Improved handling and control
• Economical OE replacement
• Meets OE product specifications

At Suncore Industries, we will endeavor to provide High Quality & Reliability Air Suspension Products. Everything we do will encompass successfully addressing the need for exceptional Customer Satisfaction and Product Quality & Reliability. We understand how frustrating it can be to have a part not perform to expectations. We are mechanics and car owners too. Our mission is to provide you with the level of quality you deserve.

Product Features:

• Air Bellow Produced For Suncore By Goodyear
• Lifetime Warranty
• Includes O-Rings
• Includes Instructions

OE Brand coil springs restore vehicle handling by returning ride height and body sway to original performance levels and they absorb shock to help maintain premium driving performance. OE Brand chassis parts ensure improved steering response and durability.

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:

• Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
• Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
• Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
• Versatile component – this connector can be used in a variety of repairs and custom installations

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Protects spring and spring seat from damage
• Replacement helps to reduce noise
• Includes insulator and bearing

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Protects spring and spring seat from damage
• Replacement helps to reduce noise
• Includes insulator and bearing

Quick Strut Kit

Shock Kit

POWER STEERING FLUID

Product Features:

• Adds up to 25% more damping performance over original equipment shocks
• Vehicle specific components and valving
• High gas pressure design provides instant, extra control
• Monotube design outperforms all other standard shock absorbers
• Unique, air-free, hydraulic unit eliminates performance fade

Complete Strut Assem

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

• REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
• EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
• CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
• CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
• IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
• LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
• OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
• Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

• REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
• EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
• CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
• CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
• IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
• Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
• 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
• Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

Rigorously tested for sustained, secure performance by a team of product and quality engineers, Dorman’s Control Arm and Ball Joint Assembly is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:

• Ball joints and bushings (when applicable) included for a complete installation, saving time and labor (where applicable)
• Direct replacement for a trouble-free installation
• Steel, iron or aluminum construction ensures durability
• Powder-coated or painted for long-lasting rust and corrosion resistance

Rigorously tested for sustained, secure performance by a team of product and quality engineers, Dorman’s Control Arm and Ball Joint Assembly is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:

• Ball joints and bushings (when applicable) included for a complete installation, saving time and labor (where applicable)
• Direct replacement for a trouble-free installation
• Steel, iron or aluminum construction ensures durability
• Powder-coated or painted for long-lasting rust and corrosion resistance

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

TRW control arms can help improve fuel economy, emissions, energy savings, driving comfort and most important, safety. TRW provides hardware kits as standard on all ball joints, installation instructions and catalog information in all formats. Upper and lower Control Arms designed as:

Product Features:

• Aluminium forged Control Arms
• Aluminium cast Control Arms – low weight/high performance
• Steel forged Control Arms
• Steel stamped Control Arms Ball Joints include the latest state-of-the-art high performance designs:
• Temperature resistant
• Low-torque/high comfort solution
• Ball stud diameters ranging from 25 to 42mm
• Integral and non-integral designs Built in Bushes:
• Rubber Bushes
• Rubber and Metal Bushes
• Hydraulic Bushes