1993 Isuzu Stylus Cooling and Climate Controls
More 1993 Isuzu Stylus Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 1993 Isuzu Stylus, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 1993 Isuzu Stylus Cooling and Climate Controls
Imperial – Electric Fan – 10" Diameter (Part No.226110)
from
$67.99
Electric fan with 10″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.
Product Features:
See More
Product Features:
- Rapid-Cool® Thin-Line electric fans
- 10″ Diameter
- 650 CFM
- Use as a pusher or puller fan
Carquest Premium – Engine Water Pump (Part No.T1102)
from
$42.99
This premium water pump uses new high-quality components And is designed to meet or exceed OE specifications. This pump is 100% tested to ensure quality. Bearings, gaskets, seals, impeller, hub And housing are all designed for long-lasting service life. All necessary gaskets And seals are included.
Product Features:
See More
Product Features:
- This pump is driven by the timing belt
- Timing belt should be replaced with the pump
- Note pulley config., using incorrect pump could result in severe engine damage
- Equipped with weep chamber or similar feature to help prevent unnecessary replacement
- All gaskets or seals necessary for installation are supplied with pump
Carquest Premium – Radiator Cap: 16 PSI (Part No.10233)
from
$13.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)
from
$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.431274)
from
$129.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.
Product Features:
See More
Product Features:
- Thermal tested under real-life temperature simulations
- High tensile strength aluminum for maximum crimp strength
- Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
- Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
- Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
- OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
Dorman – Electrical Harness – 2-Wire GM A/C Clutch with Diode (Part No.85143)
from
$11.99
This HVAC clutch coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC clutch coil connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Brake Pressure Modulator Sensor Connector (Part No.PTA1017)
from
$28.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
ACDelco – Engine Coolant Temperature Sensor (Part No.15-51107)
from
$35.99
ACDelco Professional Engine Coolant Temperature Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: HVAC. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)
from
$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Carquest Premium – HVAC Heater Core (Part No.398288)
from
$93.99
All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensure optimal heating.
Product Features:
See More
Product Features:
- CARQUEST offers a complete line of automotive heaters covering 94% of all North American vehicle applications.
- CARQUEST provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
- CARQUEST offers certified heaters that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”.
- CARQUEST heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Metrix – Receiver Drier (Part No.R104039576MTX)
from
$21.21
METRIX receiver driers are manufactured to OE specifications and provide durable, efficient performance. The OE engineered internal components provide enhanced separation of liquid and vapor, along with a desiccant filter that effectively controls moistur
Product Features:
See More
Product Features:
- OE-Quality – Exact Fit
- Utilizes factory style fittings and connectors
- Compatible with both R12 and R134A refrigerant
- Manufactured using the highest quality components
Factory Air – Ceramic Shaft Seal Kit (Part No.24016)
from
$21.29
All hardware included; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)
from
$16.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Flex A Lite – Trimline Straight Blade Electric Fan (Part No.112)
from
$112.99
Trimline Straight Blade Electric Fan
Carquest Premium – ABS Harness Connector (Part No.PTA1137)
from
$14.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)
from
$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26789)
from
$11.29
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- Application specific
- SUV and rear air applications
ACDelco – Engine Coolant Temperature Sensor (Part No.E1878)
from
$19.99
ACDelco Professional Engine Coolant Temperature Sender is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket sender is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest Premium – Blower Motor: Without Wheel (Part No.35684)
from
$110.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
Factory Air – Sealing Washer Kit (Part No.24340)
from
$9.49
Includes O-Ring; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Carquest Premium – Radiator Cap Tester Adapter (Part No.12021)
from
$17.79
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
Carquest Premium – Radiator Cap: 16 PSI (Part No.10333)
from
$21.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Safety lever to vent coolant pressure before removal
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
NTC – Thermostat (Part No.G400018259NTC)
from
$9.21
NTC offers a full line of thermostats to replace your original equipment thermostat. This includes a wide variety of temperature ranges all designed to operate within OEM specifications.
Product Features:
See More
Product Features:
- Strict quality control, and functional testing
- Self-cleaning and self-aligning thermostat valve
- Original equipment design provides exact fit and performance
- Precise sealing edges reduce leakage and premature cooling
- Temperature sensitive heat motor provides consistent valve response for smooth performance and precise engine cooling
- Stainless steel assembly and springs are engineered for long life
Dorman – Help – Radiator Drain Cocks (Part No.61125)
from
$7.29
This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.
Product Features:
See More
Product Features:
- Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
- Durable construction – this part is made of quality materials for a long service life
- Saves money – offers original equipment quality at a competitive price
- Quality assured – this petcock has undergone virtual testing to assure proper fit and function
Sankei Switches – Sankei Switches Radiator Cap (Part No.G1010324668SAK)
from
$11.11
The Sankei Switches radiator cap range has been developed to operate within original equipment manufacturer’s specifications. A faulty radiator cap can cause your car to boil-over at a lower temperature. Test or replace the coolant cap when servicing the cooling system.
Product Features:
See More
Product Features:
- Meets Original Equipment specifications.
- Made from premium materials.
- Designed to function on open cooling systems and overflow reservoir type systems.
Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)
from
$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.
Product Features:
See More
Product Features:
- Ideal for rigid cast aluminum parts
- Meets OEM Specifications
- Sensor safe & non-corrosive
- Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
- Blowout resistant, allowing leakproof gaskets to be made in just one minute
- Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
- Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
- Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
- Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
Dorman – 5-Wire Style Relay (Part No.85170)
from
$15.99
This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1993 Isuzu Stylus Cooling and Climate Controls Categories
1993 Isuzu Stylus Cooling and Climate Controls
You count on your 1993 Isuzu Stylus to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 51 Cooling and Climate Controls ranging in price from $1.99 to $129.99, you’re sure to find everything you need for your 1993 Isuzu Stylus.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 12 different brands like Permatex, Carquest Premium, and Imperial. 1993 Isuzu Stylus Cooling and Climate Controls start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 855 extensive product reviews on 1993 Isuzu Stylus Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Radiator Cap: 16 PSI with 4.0 stars and Electric Fan – 12" Diameter with 3.5 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1993 Isuzu Stylus below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 1993 Isuzu Stylus
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1993 Isuzu Stylus running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Imperial, and even more.
Popular ACDelco Cooling and Climate Controls
You’ll find popular ACDelco brand products across Engine Cooling Parts. All are waiting to get your 1993 Isuzu Stylus back on the road. Some of the top-rated ACDelco products in these categories are:
Top-Rated Permatex Cooling and Climate Controls
If Permatex are what you’re looking for, our inventory holds plenty. We stock Permatex brand Cooling and Climate Controls for your 1993 Isuzu Stylus, and some of our most reviewed Permatex parts include:
from
$6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
from
$6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets
FAQs for 1993 Isuzu Stylus Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 1993 Isuzu Stylus?
Out of 51 Cooling and Climate Controls for the 1993 Isuzu Stylus, the most popular in our inventory are:
What are the top-rated 1993 Isuzu Stylus Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 1993 Isuzu Stylus based on customer reviews/ratings are:
from
$21.99
(41)
Radiator Cap: 16 PSI
“Mustang was heating up. Found out was cap. This cap pops to release pressure so not to pop radiator. Works great. Will buy again when needed.”
