1993 GMC G1500 Differentials

Essential 1993 GMC G1500 Differentials

USA Standard Gear – Spider Gear Kit For GM 12 Bolt Car And Truck (Part No.39021)

Spider Gear Kit For GM 12 Bolt Car And Truck

from

$161.99
Product Features:
  • Spider gear kit
  • Fits GM 12 bolt passenger car and truck open differential with 30 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)

Differential Shaft Lock Bolt

from

$5.99
This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-500)

Differential Yoke including Seal and Pinion Nut

from

$139.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Yukon Gear – 8.5" GM Extra HD Standard Open Case (Uses Larger Bearings) (Part No.20084)

8.5" GM Extra HD Standard Open Case (Uses Larger Bearings)

from

$232.99
8.5″ GM EXTRA HD standard Open case (uses larger bearings).

Product Features:
  • Standard open carrier case
  • Fits GM 8.5″ with 28 or 30 spline axles
  • 2.73 and up ratio only
  • Does not include spider gears
  • Has larger carrier carrier bearing journals for high strength
See More

Yukon Gear – Master Overhaul Kit For GM 8.5" Differential With Aftermarket Positraction (Part No.14088)

Master Overhaul Kit For GM 8.5" Differential With Aftermarket Positraction

from

$309.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit is used in 8.5″ differentials using a Yukon Dura Grip, Eaton posi, ValueTrac, True Trac, Pro-Series Auburn, Detroit Locker or standard carrier with large bearing journals. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application. Includes Supershims.

Product Features:
  • Fits GM 8.5″ rear with aftermarket positraction
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
See More

Pro-King – Differential Bearing Cone (Part No.742G255)

Differential Bearing Cone

from

$19.79
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

SKF – Pinion Seal (Part No.J7010211355SKF)

Pinion Seal

from

$16.61
Pinion Seal

Yukon Gear – Bearing Race Driver (Part No.56009)

Bearing Race Driver

from

$188.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits 382A race
  • All steel construction
See More

Dorman – Rear Axle Shaft, Left or Right (Part No.630-129)

Rear Axle Shaft, Left or Right

from

$281.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

Yukon Gear – Minor Install Kit For GM 8.5" Rear Differential (Part No.12055)

Minor Install Kit For GM 8.5" Rear Differential

from

$48.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. (includes Supershims)

Product Features:
  • Fits GM 8.5″ rear
  • Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
See More

Yukon Gear – High Performance Ring & Pinion "Thick" Gear Set For GM 12 Bolt Truck In A 4.11 Ratio (Part No.24131)

High Performance Ring & Pinion "Thick" Gear Set For GM 12 Bolt Truck In A 4.11 Ratio

from

$404.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. This is a thick gear set for a 3.42 & down carrier.

Product Features:
  • Fits GM 12 bolt truck
  • 8.875″ ring gear diameter
  • 30 spline pinion
  • 12 ring gear bolts
  • 4.11 ratio
  • Thick gear for 3.42 and down carrier
See More

Richmond Gear – Differential Spool Bearing Kit (Part No.29-0013-1)

Differential Spool Bearing Kit

from

$58.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Pro-King – Differential Cross Shaft (Part No.742G673)

Differential Cross Shaft

from

$28.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – GM 10.5′ 14 Bolt Truck Cover Gasket (Part No.23016)

GM 10.5' 14 Bolt Truck Cover Gasket

from

$13.99
14T cover gasket.

Product Features:
  • Cover gasket
  • Fits GM 10.5″ 14 bolt truck
See More

Yukon Gear – Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes (Part No.30229)

Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes

from

$57.99
8.5, 9.5, & 8.2 Buick, Oldsmobile, Pontiac GM REDI sleeve yoke saver.Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits GM 8.5″, 9.5″ and 8.2″ Buick, Oldsmobile and Pontiac
See More

Yukon Gear – 14T Pinion Gear Thrust Washer (Part No.33384)

14T Pinion Gear Thrust Washer

from

$8.99
14T pinion gear Thrust washer.

Product Features:
  • Pinion gear thrust washer
  • Fits GM 10.5″ 14 bolt truck
See More

Yukon Gear – Pinion Install Kit For ’88 And Older 10.5" GM 14 Bolt Truck Differential (Part No.13058)

Pinion Install Kit For '88 And Older 10.5" GM 14 Bolt Truck Differential

from

$349.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 1988 and down GM 10.5″ 14 bolt truck
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Pro-King – Differential Cover Plug (Part No.742G484)

Differential Cover Plug

from

$6.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Pro-King – Differential Pinion Shim Kit (Part No.742G202)

Differential Pinion Shim Kit

from

$5.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Polished Aluminum Cover For GM 12 Bolt Truck (Part No.32027)

Polished Aluminum Cover For GM 12 Bolt Truck

from

$269.99
Polished aluminum cover for 12T GM.

Product Features:
  • Fits GM 12 bolt truck
  • Finned polished aluminum
See More

USA Standard Gear – Spartan Locker For GM 8.5" With 28 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17040)

Spartan Locker For GM 8.5" With 28 Spline Axles, Includes Heavy-Duty Cross Pin Shaft

from

$649.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:
  • Fits GM 18.5″ with 28 spline axles
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

Dorman – Help – Pinion Crush Sleeves (Part No.81057)

Pinion Crush Sleeves

from

$5.29
This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles.
  • Required replacement – when servicing the differential
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – 14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16064)

14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$373.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 14 piece kit
  • Composite clutches
See More

Motive Gear – Differential Carrier (Part No.GM8.6L)

Differential Carrier

from

$221.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More

Motive Gear – Differential Gear Install Kit (Part No.GM8.2IK)

Differential Gear Install Kit

from

$65.99


Product Features:
  • MINI INSTALL KIT GM 10BLT 8.2
See More

Motive Gear – Differential Gear Install Kit (Part No.GM8.5IK)

Differential Gear Install Kit

from

$65.99


Product Features:
  • MINI INSTALL KIT GM 8.5 REAR
See More

1993 GMC G1500 Differentials

Maybe you’re in the middle of a full rebuild of that 1993 GMC G1500. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 202 different Differentials in our inventory ranging from $1.99 to $1,638.99. That means you can find the exact parts or products you need to keep that 1993 GMC G1500 running smoothly.

Differentials are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 1993 GMC G1500. Valvoline, FELPRO, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1993 GMC G1500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,330 reviews in this category, some of the top rated parts include Rear Differential Cover with 4.1 stars and Differential Shaft Lock Bolt with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1993 GMC G1500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1993 GMC G1500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1993 GMC G1500 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your G1500 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Driveworks Differentials

We carry Driveworks parts in our stock across Differential Pinion Seals categories, plus more. For a 1993 GMC G1500, our most popular Driveworks Differentials include:
Oil Seal
from $7.79
(1)
Oil Seal
Differential Pinion Seals

Top 1993 GMC G1500 Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1993 GMC G1500. Popular Felpro parts include:
Differential Cover Gasket
from $9.99
(195)
Differential Cover Gasket
Rear Differential Cover Gaskets

FAQs for 1993 GMC G1500 Differentials

What are the most purchased Differentials for the 1993 GMC G1500?

Out of 202 Differentials for the 1993 GMC G1500, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $23.99
(7)
Bearings
Front Differential Pinion Bearings

What are the top-rated 1993 GMC G1500 Differentials?

Top-rated Differentials for your 1993 GMC G1500 based on customer reviews/ratings are:
Rear Differential Cover
from $32.99
(14)
Rear Differential Cover
“Heavy steel with the original magnet. Fits like original.. Not a cheap stamping by any means”
Differential Shaft Lock Bolt
from $5.99
(11)
Differential Shaft Lock Bolt
“great”
Differential Yoke including Seal and Pinion Nut
from $139.99
(10)
Differential Yoke including Seal and Pinion Nut
“Will this fot 2001 jeep grand cherokee 4.0 limited with dana 35 read end”