1993 Ford Ranger Differentials

Essential 1993 Ford Ranger Differentials

Pro-King – Axle Seal (Part No.714D076)

Axle Seal

from

$5.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Pro-King – Differential Cover Gasket (Part No.762B303)

Differential Cover Gasket

from

$3.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Pinion Install Kit For Ford 7.5" Differential (Part No.13039)

Pinion Install Kit For Ford 7.5" Differential

from

$184.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Ford 7.5″
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Driveworks – Taper Bearing Set (Part No.S-A-6)

Taper Bearing Set

from

$10.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.206)

Bearings

from

$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Trao Loc Spring For Ford 8.8", 31 Spline (Part No.33516)

Trao Loc Spring For Ford 8.8", 31 Spline

from

$99.99
Product Features:
  • Trac Loc spring for Ford 8.8″
  • 31 spline applications only
See More

Sealed Power – Engine Auxiliary Shaft Bearing Set (Part No.1460M)

Engine Auxiliary Shaft Bearing Set

from

$22.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Steel-backed Babbitt lining material
  • Used in automotive and high-performance
  • Babbitt is designed to perform under extreme loads w/o damaging other engine parts
  • Babbitt is more environmentally friendly than other material
  • ISO & QS certified manufacturing
See More

Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4105)

Differential Pinion Solid Spacer Kit w/Shims

from

$22.79


Product Features:
  • FORD 9″ SOLID SPACER KIT
See More

Pro-King – Differential Cross Shaft (Part No.742G930)

Differential Cross Shaft

from

$2.79
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Bearing Race Driver (Part No.56022)

Bearing Race Driver

from

$188.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M86610 race
  • All steel construction
See More

Yukon Gear – Dana 30 Side Gear Thrust Washer (Part No.33284)

Dana 30 Side Gear Thrust Washer

from

$10.99
Dana 25, Dana 27, & Dana 30 side gear Thrust washer.

Product Features:
  • Side gear thrust washer for Dana Spicer 25, 27, 30 and AMC Model 35
  • 1.560″ I.D.
  • Fits standard open differentials only
See More

Timken – Differential Pinion (Part No.J7021374649TIM)

Differential Pinion

from

$12.34
Differential Pinion

Dorman – Differential Clutch Kit (Part No.697-417)

Differential Clutch Kit

from

$283.99
This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles
  • Quality materials – all components are built for reliable longevity and performance
  • Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Pro-King – Differential Ring Gear Bolt (Part No.742E935)

Differential Ring Gear Bolt

from

$1.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Cover Bolt For Ford 7.5", 8.8" & 9.75" (Part No.33554)

Cover Bolt For Ford 7.5", 8.8" & 9.75"

from

$6.99
Yukon 1541H alloy replacement rear axle for Dana 60, 70, and 80, 35 spline. (40″ to 43.5″) Full float axle (8×3.96″ ). Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a full-floating axle.

Product Features:
  • 35 spline
  • 8 x 3.96″ bolt pattern
  • Cut to length design fits 40″-43.5″ applications
  • Fits Dana Spicer 60, 70 and 80
See More

Yukon Gear – 8.8" Ford Tracloc Clutch Set, Both Sides (Part No.16018)

8.8" Ford Tracloc Clutch Set, Both Sides

from

$241.99
8.8″ Ford TracLoc (with short ears–for late models only) clutch set, both sides.

Product Features:
  • Clutch kit
  • Fit Ford 8.8″ Trac Loc positraction
See More

Yukon Gear – Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16042)

Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$41.99
Product Features:
  • Shim kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
See More

Powertrax – Grip PRO Traction System (Part No.GT443527)

Grip PRO Traction System

from

$526.69
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

USA Standard Gear – Standard Spider Gear Set For Ford 7.5" (Part No.39014)

Standard Spider Gear Set For Ford 7.5"

from

$156.99
Spindle nut washer for Dana 28, ’92 & down. This replaces Spicer part number 40075.

Product Features:
  • Spider gear kit
  • Fit Ford 7.5″ open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Dorman – Ring And Pinion Bearing Installation Kit (Part No.697-101)

Ring And Pinion Bearing Installation Kit

from

$164.99
This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.

Product Features:
  • Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications
  • Related repair – smart to have on hand when installing a differential ring and pinion
  • Durable construction – built for reliable longevity, free of defects in materials and workmanship
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Yukon Gear – Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50 (Part No.33002)

Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50

from

$4.99
Product Features:
  • Oil baffle for Dana Spicer 30, Dana Spicer 44 IFS, Dana Spicer 50, AMC Model 35 IFS
See More

Yukon Gear – Trac Loc Positraction, Ford 8.8", 31 Spline (Part No.20069)

Trac Loc Positraction, Ford 8.8", 31 Spline

from

$719.99
Product Features:
  • Trac Loc positraction
  • Fits Ford 8.8″ with 31 spline axles
See More

Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-507)

Differential Yoke including Seal and Pinion Nut

from

$48.99
A worn or damaged differential pinion flange can lead to driveline vibrations and fluid leaks. This part is designed to match the performance of the original equipment pinion flange on specified vehicles. It has been engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is rusted, worn or damaged. It is made of rugged materials for reliable service and durability.

Product Features:
  • Direct replacement – this differential pinion flange is designed to match the performance of the original equipment flange on specified vehicles
  • Ideal solution – engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is worn or damaged
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

USA Standard Gear – Axle For ’99-’09 Ford Ranger, Right Hand – 27.25" Long, 28 Spline (Part No.35027)

Axle For '99-'09 Ford Ranger, Right Hand - 27.25" Long, 28 Spline

from

$172.99
Product Features:
  • Fits 1999-2005 Ford Ranger
  • Right hand side
  • 28 spline
  • 27 1/4″ long
  • 5 lug
See More

Pro-King – Differential Pinion Shim Kit (Part No.742G202)

Differential Pinion Shim Kit

from

$5.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Cross Pin Shaft (0.875") For ’86 And Newer 8.8" Ford (Part No.33331)

Cross Pin Shaft (0.875") For '86 And Newer 8.8" Ford

from

$42.99
Cross pin shaft (0.875″) for ’86 and newer 8.8″ Ford.

Product Features:
  • Cross pin shaft for Ford 8.8″
  • 0.875″ diameter
See More

Yukon Gear – Replacement Outer Slinger For Dana 28 (Part No.33016)

Replacement Outer Slinger For Dana 28

from

$3.99
Product Features:
  • Outer slinger
  • Fits Dana Spicer 28
See More

Yukon Gear – Replacement Outer Oil Slinger For Dana 25, 27, 30, 44 & 50 (Part No.33011)

Replacement Outer Oil Slinger For Dana 25, 27, 30, 44 & 50

from

$5.99
Product Features:
  • Outer oil slinger for Dana Spicer 25, 27, 30, 44 and 50
See More

1993 Ford Ranger Differentials

Maybe you’re in the middle of a full rebuild of that 1993 Ford Ranger. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 255 different Differentials in our inventory ranging from $0.99 to $1,099.99. That means you can find the exact parts or products you need to keep that 1993 Ford Ranger running smoothly.

Differentials are only as good as their brand. We stock 18 different brands to make sure you have plenty of trusted parts to choose from for your 1993 Ford Ranger. Valvoline, National, and Felpro are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1993 Ford Ranger, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,652 reviews in this category, some of the top rated parts include Rear Differential Cover with 4.4 stars and Multi Purpose Seal with 4.1 stars.

So if you’re in the market for aftermarket Differentials to keep your 1993 Ford Ranger rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1993 Ford Ranger Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1993 Ford Ranger demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Ranger the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Powertrax Differentials

We carry Powertrax parts in our stock across Differential Open Unit and Components categories, plus more. For a 1993 Ford Ranger, our most popular Powertrax Differentials include:
Lock Right Locker
from $444.99
(1)
Lock Right Locker
Differential Open Unit and Components

FAQs for 1993 Ford Ranger Differentials

What are the most purchased Differentials for the 1993 Ford Ranger?

Out of 255 Differentials for the 1993 Ford Ranger, the most popular in our inventory are:
Differential Cover Gasket
from $14.99
(121)
Differential Cover Gasket
Rear Housing Cover Gaskets
Taper Bearing Set
from $10.29
(38)
Taper Bearing Set
Differential Bearings
Bearings
from $16.99
(25)
Bearings
Differential Bearings

What are the top-rated 1993 Ford Ranger Differentials?

Top-rated Differentials for your 1993 Ford Ranger based on customer reviews/ratings are:
Rear Differential Cover
from $34.99
(34)
Rear Differential Cover
“does not look like this in box, its black powder coated , this view is from the inside . there is a magnet in the diff cover”
Multi Purpose Seal
from $11.99
(28)
Multi Purpose Seal
“Stopped the leak”
Differential Cover Gasket
from $6.49
(13)
Differential Cover Gasket
“It’s a gasket. It fits and it doesn’t leak. That’s what they are supposed to do.”