1993 Chevrolet Caprice Drivetrains
More 1993 Chevrolet Caprice Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1993 Chevrolet Caprice, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1993 Chevrolet Caprice Drivetrains
USA Standard Gear – Pinion Installation Kit For ’82-’99 GM 7.5" & 7.625" (Part No.60010)
from
$153.99
7.5″ & 7.625″ GM 82-99 PINION KIT .
Product Features:
See More
Product Features:
- Fits 1982-1999 GM 7.5″ and 7.625″
- Uses Koyo bearings and races
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
Pro-King – Differential Pinion Shim Kit (Part No.742G202)
from
$5.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
USA Standard Gear – Ring & Pinion Gear Set For GM 7.5" In A 2.73 Ratio (Part No.36192)
from
$369.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.
Product Features:
See More
Product Features:
- Fits GM 7.5″ and 7.6″
- 7.50″ ring gear diameter
- 27 spline pinion
- 10 ring gear bolts
- 2.73 ratio
Yukon Gear – Posi Spring Kit For GM 7.5", With Preload Plates (Part No.33206)
from
$153.99
Product Features:
See More
- Positraction spring kit
- Fits GM 7.5″ and 7.625″ Dura Grip
- Includes preload plates
Yukon Gear – 14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16041)
from
$404.99
Product Features:
See More
- Clutch kit
- Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
- 14 piece kit
- Carbon fiber clutches
Driveworks – Taper Bearing Set (Part No.S-A-6)
from
$10.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
USA Standard Gear – Standard Spider Gear Set For GM 7.5", 26 Spline (Part No.39023)
from
$156.99
Product Features:
See More
- Spider gear kit
- Fits GM 7.5″ 26 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Motive Gear – Ring Gear Bolt (Part No.14066913)
Yukon Gear – Pinion Nut Washer (Part No.33167)
from
$14.99
Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.
Product Features:
See More
Product Features:
- Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.
Yukon Gear – Standard Open Side Gear Thrust Washer For 8.5" GM (Part No.33304)
from
$15.99
Standard open side gear thrust washer for 8.5″ GM.
Product Features:
See More
Product Features:
- Side gear thrust washer
- Fits GM 8.5″
Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (Part No.618-005.1)
from
$3.79
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)
from
$6.49
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Multi Purpose Seal (Part No.5200)
from
$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Dorman – Spindle Nut 3/4 In.-20 Hex 1-1/16 In. (sold by each) (Part No.615-065)
from
$4.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Standard Open Carrier Case, GM 7.625", 3.23 & Up (Part No.20102)
from
$481.99
7.625″ GM standard Open case, 3.23 & up, Large & SM windows, loaded. 28 Spline.
Product Features:
See More
Product Features:
- Standard open carrier case and spiders
- 7.5″ & 7.625″ 28 spline applications
- 3.23 and up ratio only
- Large and Small windows
Pro-King – Differential Internal Nest Kit (Part No.742G717A)
from
$179.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – Yoke For 8.5" Or 8.6" GM (Mech 3R) With A U/Joint Size And Triple Lip Design (Part No.41071)
from
$226.99
Yukon yoke for 8.5″ or 8.6″ GM (mech 3R) with a U/joint size and triple lip design. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. This yoke uses inside snap rings. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 8.5″ and 8.6″
- 30 spline
- Mechanics 3R u-joint size
- 2.556″ snap ring span
- 1.125″ cap diameter
- Inside snap ring design
- Strap style
National – Bearings (Part No.A-5)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Felpro – Differential Cover Gasket (Part No.RDS 55028-1)
from
$9.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Yoke For GM 7.5" (Mech 3R) In A Triple Lip Design (Part No.41090)
from
$184.99
Yukon yoke for GM 7.5″ (mech 3R) in a triple lip design. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. This yoke uses inside clips. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 7.5″ and 7.625″
- 27 spline
- Mechanics 3R u-joint size
- Inside snap ring design
- 2.556″ snap ring span
- 1.125″ cap diameter
- Strap style
Powertrax – No-Slip Traction System (Part No.9207822805)
from
$544.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Yukon Gear – Aluminum Girdle Cover For GM 12 Bolt Car Ta HD (Part No.32116)
from
$419.99
Aluminum Girdle cover for GM 12P TA HD.
Product Features:
See More
Product Features:
- Fits GM 12 bolt passenger car
- Aluminum girdle cover
Yukon Gear – Master Overhaul Kit For ’81 And Older GM 7.5" Differential (Part No.14076)
from
$289.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application. Includes Supershims.
Product Features:
See More
Product Features:
- Fits 1981 and down GM 7.5″
- Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush, and gasket.
Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (sold by each) (Part No.618-005)
from
$3.49
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Bearing Race Driver (Part No.56017)
from
$215.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM89410 race
- All steel construction
Driveworks – Axle Repair Bearing (Part No.S-RP-6408)
from
$24.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Motive Gear – Differential Mini Spool (Part No.MS7.5-28)
Popular 1993 Chevrolet Caprice Drivetrains Categories
1993 Chevrolet Caprice Drivetrains
You count on your 1993 Chevrolet Caprice to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 364 Drivetrains ranging in price from $1.99 to $1,839.99, you’re sure to find everything you need for your 1993 Chevrolet Caprice.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 18 different brands like Valvoline, Moog, and Driveworks. 1993 Chevrolet Caprice Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 6,355 extensive product reviews on 1993 Chevrolet Caprice Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.6 stars and Greaseable Super Strength Universal Joint with 4.2 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1993 Chevrolet Caprice below to get started!
Top-Rated Drivetrains Brands For Your 1993 Chevrolet Caprice
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1993 Chevrolet Caprice running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Powertrax Drivetrains
You’ll find popular Powertrax brand products across Differentials. All are waiting to get your 1993 Chevrolet Caprice back on the road. Some of the top-rated Powertrax products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1993 Chevrolet Caprice, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1993 Chevrolet Caprice Drivetrains
What are the most purchased Drivetrains for the 1993 Chevrolet Caprice?
Out of 364 Drivetrains for the 1993 Chevrolet Caprice, the most popular in our inventory are:
What are the top-rated 1993 Chevrolet Caprice Drivetrains?
Top-rated Drivetrains for your 1993 Chevrolet Caprice based on customer reviews/ratings are:
from
$34.99
(48)
Greaseable Super Strength Universal Joint
“Moog and advanced auto got me out of a bad situation with an amazing part ( u”
from
$7.99
(45)
DIFFERENTIAL GASKET
“Some say no need for a gasket and to use gasket sealer only its just as good. I like to make sure that the cover is installed properly to avoid any l”
