1992 Jeep Wrangler Performance and Racing Products

Popular 1992 Jeep Wrangler Performance and Racing Products Categories

Essential Performance and Racing Products for 1992 Jeep Wranglers

Accel – High-Performance Ignition Coil – Direct OE Fit (Part No.140021)

High-Performance Ignition Coil - Direct OE Fit

from

$78.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Standard Motor Products SMP Uf-198
  • MSD 8228
  • Improved Idle Quality
  • Resists Shock And Vibration
  • Resists Corrosion
See More

Omix – Distributor; 4.0L; 91-93 Jeep Wrangler YJ (Part No.17239.04)

Distributor; 4.0L; 91-93 Jeep Wrangler YJ

from

$267.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:
  • For 4.0L
  • OE Style
  • Direct Fit
See More

Omix – Flywheel; 82-87 Jeep CJ/YJ; 4.2L (Part No.16912.05)

Flywheel; 82-87 Jeep CJ/YJ; 4.2L

from

$173.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:
  • Use With 4.2L
  • OE Style
  • Direct Fit
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)

Thermocap Radiator Cap

from

$54.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Motive Gear – Differential Mini Spool (Part No.MSD44-30)

Differential Mini Spool

from

$101.99


Product Features:
  • MINI SPOOL – DANA 44, 30 SPL.
See More

Omix – Master Clutch Kit (Part No.16902.18)

Master Clutch Kit

from

$386.99
Is your clutch chattering or slipping? Maybe you are just replacing the clutch while you have the engine or transmission out?

Product Features:
  • 10.5 in.
  • OE Style
  • Direct Fit
See More

Omix – Brake Drum; for Dana 35; 90-06 Jeep Wrangler XJ/YJ/TJ (Part No.16701.08)

Brake Drum; for Dana 35; 90-06 Jeep Wrangler XJ/YJ/TJ

from

$95.99
Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:
  • 1990-2006 Wrangler, 1990-2001 Cherokee, 1993-1998 Grand Cherokee, Brake Drum (Rear), 9″ x 2.5″ With Dana 35
See More

Russell – Street Legal, Wrangler (YJ) with 4" lift (Part No.695940)

Street Legal, Wrangler (YJ) with 4" lift

from

$105.99
Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f
See More

Omix – Water Pump; w/V-Belt; 87-90 Jeep Wrangler YJ (Part No.17104.06)

Water Pump; w/V-Belt; 87-90 Jeep Wrangler YJ

from

$117.99
Is your water pump leaking? Over time the rubber impeller will deteriorate. It’s easier to replace it now than to have a roadside breakdown in the future. Get a high quality water pump from Omix-ADA. Keep your Jeep running cool.

Product Features:
  • OE Style
  • Direct Fit
  • Includes V-belt
  • Efficient Cooling
See More

Energy Suspension – Coil Spring Isolator Set (Part No.2.6103R)

Coil Spring Isolator Set

from

$53.99
Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Lasts from 3 to 10 Times Longer
  • Assemble to Chassis Same Way as OEM
  • Maintains Factory Ride Characteristics
  • Simple Way to Increase Vehicle Height
See More

Energy Suspension – Body Mount Set (Part No.2.4108G)

Body Mount Set

from

$262.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Energy Suspension – Motor Mount (Part No.2.1104R)

Motor Mount

from

$69.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:
  • Gains Both Performance and Longevity
  • Will Handle Any and All Torque
  • Out Lasts Rubber
See More

Omix – Rear Diff Cover; for Dana 44 (Part No.16595.85)

Rear Diff Cover; for Dana 44

from

$68.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:
  • Steel
  • Includes Cover
  • OE Style
  • Direct Fit
See More

Rugged Ridge – Skid Plate; Differential; for Dana 30 (Part No.16597.30)

Skid Plate; Differential; for Dana 30

from

$123.99
Protect your factory differential cover with These heavy-duty skid plates. Designed to fit the contours of your stock differential cover. Constructed of durable 3/16 Inch black powder coated steel, these skid plates will help you slide over obstacles.

Product Features:
  • Cast Steel
  • Black Finish
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Tie Rod Dust Boot

from

$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Energy Suspension – Sway Bar Bushing Set (Part No.2.5102G)

Sway Bar Bushing Set

from

$25.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Energy Suspension – Track Arm Bushing Set (Part No.2.7103G)

Track Arm Bushing Set

from

$23.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Omix – Manifold Gasket; 4.0L; 91-99 Jeep MJ/XJ/YJ/ZJ/TJ (Part No.17451.06)

Manifold Gasket; 4.0L; 91-99 Jeep MJ/XJ/YJ/ZJ/TJ

from

$23.99
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, it’s time to replace the exhaust manifold gasket. Omix-ADA offers high quality exhaust manifold gaskets to solve the problem.

Product Features:
  • Composite
  • Heat Resistant
  • OE Style
  • Direct Fit
See More

Omix – Crankshaft Pilot Bearing; 92-07 XJ/KJ/YJ/TJ/LJ (Part No.16910.12)

Crankshaft Pilot Bearing; 92-07 XJ/KJ/YJ/TJ/LJ

from

$47.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:
  • Roller Bearing
  • OE Style
  • Direct Fit
See More

Omix – Automatic Transmission Rebuild Kit; TF6; 87-03 Jeep (Part No.19001.04)

Automatic Transmission Rebuild Kit; TF6; 87-03 Jeep

from

$421.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:
  • OE Style
  • Direct Fit
See More

Omix – Leaf Spring Main Eye Bushing; 87-95 Jeep Wrangler YJ (Part No.18207.08)

Leaf Spring Main Eye Bushing; 87-95 Jeep Wrangler YJ

from

$19.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:
  • Main Eye
  • OE Style
  • Direct Fit
See More

Accel – Tst Jeep 91-93 4.0L Ho Efi (Part No.TST17)

Tst Jeep 91-93 4.0L Ho Efi

from

$126.99
Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

Product Features:
  • Includes Everything Needed
  • Resistance High Dielectric Strength Compounds
  • Race Proven
  • Improved Performance
  • Reduced Emissions
See More

Energy Suspension – Shackle Bushing Set (Part No.2.2120G)

Shackle Bushing Set

from

$19.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Omix – Sway Bar Link (Part No.18724.06)

Sway Bar Link

from

$38.99
Does your Jeep wander down the road or shift suddenly on turns? The rubber bushings in your sway bar end links may be worn out or missing. Omix-ADA offers replacement sway bar end links to keep your Jeep under control.

Product Features:
  • Steel
  • With Bushing And Insert
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Driveshaft U-Joint; 1310 Spicer (Part No.16585.02)

Driveshaft U-Joint; 1310 Spicer

from

$38.49
Are your U-joints making noise? Or has one broken? When they do break, they usually damage the axle shafts or driveshafts too. That’s a lot of unnecessary work and expense. U-joint replacement is a routine maintenance chore.

Product Features:
  • Front/Rear
  • OE Style
  • Direct Fit
See More

Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)

Drive Shaft Pinion Yoke

from

$117.99


Product Features:
  • PINION YOKE
  • CAST:1310
  • U-BOLT STYLE
See More

Accel – Adp.Harness 98/Newer Mopar (Part No.140021AH)

Adp.Harness 98/Newer Mopar

from

$38.99
Allows you to directly plug into the ACCEL PN 140021 Super coil when being used on a 1998 to 2002 Dodge truck, or Jeep equipped with a distributor and the newer light grey Yazaki wire harness coil connector. No cutting or splicing is required.

Product Features:
  • Nice Clean Connection
  • Easy Installation
See More

K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-1017)

Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N’s Limited Warranty.

Product Features:


    Product Features:
    • Designed to allow high flow rates and a consistent flow of oil to your engine
    • Pleated synthetic-blend filtration media removes most harmful contaminants
    • Fast and easy Wrench-Off removal using the welded one-inch hex nut
    • High capacity to withstand the service intervals recommended by vehicle manufacturers
    • Heavy-duty canister for outstanding durability
    • Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
    • Designed to operate with all synthetic, conventional, and blended motor oils
    • Limited Warranty
See More

Upgrade your 1992 Jeep Wrangler with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1992 Jeep Wrangler, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Performance and Racing Products are key to keeping your Wrangler functioning at its best. At Advance Auto Parts, we offer a wide selection of 81 Performance and Racing Products for the 1992 Jeep Wrangler, designed to meet your needs without breaking the bank. From Performance Exhaust Product replacements to Performance Engines upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1992 Jeep Wrangler at great prices. Our Performance and Racing Products inventory for this model ranges from just $4.29 to $575.99, with an average price of $120.48. Our 81 Performance and Racing Products in stock come from 15 trusted brands, so you’re sure to find the right part for your 1992 Jeep Wrangler without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1992 Jeep Wrangler, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N, Omix, Accel, and more. K&N Performance and Racing Products start at just $17.99 and boast an impressive 4.8 stars average rating from customers. Omix and Accel also bring quality to the table, with Performance and Racing Products available starting at $8.29, and at an average 4.3 stars rating. With 1,156 customer reviews and counting, our 1992 Jeep Wrangler Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1992 Jeep Wrangler is always ready to roll. We’re committed to providing you with everything you need to keep your Wrangler in top shape, all in one place. Start shopping confidently below for your 1992 Jeep Wrangler!

Best-Selling Performance Exhaust Products for 1992 Jeep Wranglers

Enhance the driving experience in your Jeep with 5 quality Performance Exhaust Product components, starting at $23.99.

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942447)

Super 44 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

from

$134.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Dynomax – Single – 2.25in Cat-Back Exhaust System – Super Turbo Muffler: Aluminized Steel (Part No.17309)

Single - 2.25in Cat-Back Exhaust System - Super Turbo Muffler: Aluminized Steel

from

$235.99
Give your Jeep Wrangler YJ’s exhaust system an upgrade with a DynoMax Super Turbo single 2.25-in. cat-back exhaust system. Features a DynoMax Super Turbo muffler that channels exhaust flow and reduces turbulence and fiberglass matting that absorbs unwanted interior resonance for a mellow tone.

Product Features:
  • COMPATIBILITY : Designed for Jeep Wrangler YJ; see product information for compatibility and engine specifications
  • COMPLETE SOLUTION : Includes DynoMax Super Turbo muffler, pipe and clamps
  • EASY TO INSTALL : Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn’t require specialized fabrication and/or welding
  • IMPROVED FLOW CAPACITY : Aluminized steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • PRECISION DESIGN : Exclusive flow director technology channels exhaust flow and reduces turbulence on most applications; dyno proven to flow up to 373 SCFM
  • PREMIUM PERFORMANCE : Large flow tubes improve exhaust flow and reduce backpressure
  • ENGINEERED TO LAST : Aluminized-steel muffler reduces corrosion and internal drainage system reduces moisture collection
  • SPECS : Welded 2.5-in. outlet single wall, buffed and polished stainless steel slant cut tip
See More

Omix – Manifold Gasket; 4.0L; 91-99 Jeep MJ/XJ/YJ/ZJ/TJ (Part No.17451.06)

Manifold Gasket; 4.0L; 91-99 Jeep MJ/XJ/YJ/ZJ/TJ

from

$23.99
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, it’s time to replace the exhaust manifold gasket. Omix-ADA offers high quality exhaust manifold gaskets to solve the problem.

Product Features:
  • Composite
  • Heat Resistant
  • OE Style
  • Direct Fit
See More

Flowmaster Inc. – Cat-back System – Single Rear Exit – Force II – Mild Sound (Part No.17272)

Cat-back System - Single Rear Exit - Force II - Mild Sound

from

$549.99
For the person who wants a subtle custom appearance with all the benefits that a Flowmaster Cat-back exhaust system provides. S.O.R. (Single out rear) systems are the perfect choice. Force II systems delivers a mild exterior tone and moderate to mild interior tone, and are suited to customers looking for efficiency improvements without a lot of noise. Especially recommended for towing applications. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.
See More

Flowmaster Inc. – 40 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942442)

40 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

from

$149.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Most Popular 1992 Jeep Wrangler Performance Engines

Customize your Jeep with 11 Performance Engines products like Performance Engine Coolant Thermostats, Performance Engine Cylinder Head Gaskets, and Performance Engine Rocker Arms, all priced under $88.99.

Omix – Thermostat 180 Degree; 41-71 Willys/Jeep Models (Part No.17106.02)

Thermostat 180 Degree; 41-71 Willys/Jeep Models

from

$8.29
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:
  • OE Style
  • Direct Fit
  • Steel
  • Better Flow Control
See More

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$29.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Mr. Gasket – High Performance Thermostat – 160 Degree Brass & Copper (Part No.4363)

High Performance Thermostat - 160 Degree Brass & Copper

from

$29.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens at 160 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully opens at Correct Temperature Consistently Regardless of engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Mr. Gasket – High Performance Thermostat (Part No.4365)

High Performance Thermostat

from

$31.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 195 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Omix – Rocker Arm; 2.5L/4.0L/4.2L; 83-06 Jeep CJ/Wrangler YJ (Part No.17408.06)

Rocker Arm; 2.5L/4.0L/4.2L; 83-06 Jeep CJ/Wrangler YJ

from

$9.29
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:
  • Metal
  • OE Style
  • Direct Fit
See More

Omix – Rocker Arm Bridge; 258CI; 72-06 Jeep CJ/Wrangler YJ/TJ (Part No.17408.11)

Rocker Arm Bridge; 258CI; 72-06 Jeep CJ/Wrangler YJ/TJ

from

$6.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:
  • Metal
  • OE Style
  • Direct Fit
See More

Omix – Water Pump; 91-01 Jeep Cherokee/Grand Cherokee/Wrangler (Part No.17104.07)

Water Pump; 91-01 Jeep Cherokee/Grand Cherokee/Wrangler

from

$82.99
Is your water pump leaking? Over time the rubber impeller will deteriorate. It’s easier to replace it now than to have a roadside breakdown in the future. Get a high quality water pump from Omix-ADA. Keep your Jeep running cool.

Product Features:
  • OE Style
  • Direct Fit
  • High Quality
  • Efficient Cooling
See More

Omix – Cylinder Head Gasket; 4.0L; 91-95 Jeep Models (Part No.17446.05)

Cylinder Head Gasket; 4.0L; 91-95 Jeep Models

from

$38.49
Is your Jeep’s cylinder head gasket leaking? Or, are you rebuilding an engine and need a fresh gasket? Omix-ADA offers high-quality replacement cylinder head gaskets that will give you years of service and get you back on the road.

Product Features:
  • Composite
  • OE Style
  • Direct Fit
See More

Omix – Piston Ring Set (Part No.17430.24)

Piston Ring Set

from

$88.99
Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.

Product Features:
  • Standard
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Piston Std; 2.5L/4.0L (Part No.17427.07)

Piston Std; 2.5L/4.0L

from

$73.99
Are you rebuilding an engine and need a fresh set of pistons? Omix-ADA offers high-quality replacement pistons from Standard to .080 thousandths over size. Wrist pins included. They will give you years of service and get you back on the road. Sold individually.

Product Features:
  • Standard
  • OE Style
  • Direct Fit
See More

Omix – Piston; .010; 2.5L/4.0L (Part No.17427.11)

Piston; .010; 2.5L/4.0L

from

$73.99
Are you rebuilding an engine and need a fresh set of pistons? Omix-ADA offers high-quality replacement pistons from Standard to .080 thousandths over size. Wrist pins included. They will give you years of service and get you back on the road. Sold individually.

Product Features:
  • .010 Over
  • Engine Work May Be Required To Install This Part
See More

Top Picks for 1992 Jeep Wrangler Performance Fuel Systems

Upgrade Jeep Wranglers with top-quality Performance Fuel Systems parts, including 1 OEM and aftermarket selections for your 1992 model.

Omix – Fuel lnjector (Part No.17714.04)

Fuel lnjector

from

$141.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • For 4.L
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

In-Demand Performance Oil Filters for 1992 Jeep Wranglers

Select from 3 premium Performance Oil Filters parts for your 1992 Jeep Wrangler, with prices ranging from $10.79 to $17.99.

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

Omix – Oil Filter; SAE Thread; 91-08 Jeep Wrangler (Part No.17436.08)

Oil Filter; SAE Thread; 91-08 Jeep Wrangler

from

$10.79
Routine maintenance is important for your Jeep. Omix-ADA offers high quality replacement oil filters to keep your Jeep running well for years to come. Be nice to your Jeep and it will be nice to you.

Product Features:
  • OE Style
  • Direct Fit
See More

Omix – Oil Cap; 2.0L/2.1L/2.5L/2.8L/4.0L/4.2L; 80-90 Jeep (Part No.17403.02)

Oil Cap; 2.0L/2.1L/2.5L/2.8L/4.0L/4.2L; 80-90 Jeep

from

$11.29
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:
  • Plastic Top With Rubber Gasket
  • OE Style
  • Direct Fit
See More

Most Sold 1992 Jeep Wrangler Performance Ignition Products

Explore our best-selling Jeep parts for the 1992 Wrangler among 4 OEM and aftermarket options starting from $38.99.

Accel – Adp.Harness 98/Newer Mopar (Part No.140021AH)

Adp.Harness 98/Newer Mopar

from

$38.99
Allows you to directly plug into the ACCEL PN 140021 Super coil when being used on a 1998 to 2002 Dodge truck, or Jeep equipped with a distributor and the newer light grey Yazaki wire harness coil connector. No cutting or splicing is required.

Product Features:
  • Nice Clean Connection
  • Easy Installation
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$92.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Accel – High-Performance Ignition Coil – Direct OE Fit (Part No.140021)

High-Performance Ignition Coil - Direct OE Fit

from

$78.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Standard Motor Products SMP Uf-198
  • MSD 8228
  • Improved Idle Quality
  • Resists Shock And Vibration
  • Resists Corrosion
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

Top-Rated Performance and Racing Products Brands For Your 1992 Jeep Wrangler

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1992 Jeep Wranglers. Below you’ll find some of our best rated Performance and Racing Products from K&N, Omix, and Accel, and more. Performance and Racing Products from these brands that fit a 1992 Wrangler start at just $8.29 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular K&N 1992 Jeep Wrangler Performance and Racing Products

When it comes to maintaining or upgrading your 1992 Jeep Wrangler, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1992 Jeep Wrangler. With over 2 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99, with an average price of just $192.99. Plus, with over 122 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
from $17.99
(120)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
“All good, right filter for 1973 volvo.”
Cold Air Intake: Adds Up To 13 Horsepower, With Million Mile Air Filter
from $367.99
(2)
Cold Air Intake: Adds Up To 13 Horsepower, With Million Mile Air Filter
“I have the Cold Air Intake system on my 1994 Jeep Wrangler 4.0L and love it. More power and it can breath much better than the stock box. Thanks K&N”

Popular Omix 1992 Jeep Wrangler Performance and Racing Products

Omix auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1992 Jeep Wrangler owner should feel confident when installing genuine Omix parts in their vehicle. To ensure the best fit and performance for your 1992 Wrangler, Advance Auto Parts carries a full inventory of 3 Omix Performance and Racing Products. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Omix Performance and Racing Products range from $8.29 to $245.99, plus, with more than 4 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
Front Sway Bar Link; 87-95 Jeep Wrangler YJ
from $21.49
(1)
Front Sway Bar Link; 87-95 Jeep Wrangler YJ
“good replacement parts for you old worn out parts there not quick disconnects but thats not what i wanted. just a direct replacement with a good price”
Thermostat 180 Degree; 41-71 Willys/Jeep Models
from $8.29
(2)
Thermostat 180 Degree; 41-71 Willys/Jeep Models
“Product is great. Installing next weekend to my jeep”
Starter
from $245.99
(1)
Starter
“I purchased this particular starter because of the name omix-ada which means quality. It also comes with a 5 year warranty……..you can’t beat that!”

FAQs for 1992 Jeep Wrangler Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1992 Jeep Wranglers?

Out of 81 Performance and Racing Products that fit 1992 Jeep Wranglers, the following parts are the top sellers:

What’s the price range for 1992 Jeep Wrangler Performance and Racing Products?

Performance and Racing Product prices for the 1992 Jeep Wrangler start at $4.29 and go up to $575.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1992 Jeep Wrangler?

The average price for Performance and Racing Products for the 1992 Jeep Wrangler is $120.48. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Jeep Wrangler model years?

Yes, we currently carry Performance and Racing Products for 36 model years of Jeep Wranglers between 1987 and 2025. Performance and Racing Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Performance and Racing Products for my 1992 Jeep Wrangler?

The cheapest 1992 Jeep Wrangler Performance and Racing Products we carry in stock are:

What are the top-rated Performance and Racing Products that fit the 1992 Jeep Wrangler?

Out of 1,156 reviews by customers, our 1992 Jeep Wrangler Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1992 Jeep Wrangler and their top-rated products:

Can I get help with 1992 Jeep Wrangler Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Performance and Racing Products and more.

What is your return policy for Jeep Wrangler Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Jeep Wrangler Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.