from

$21.99

Product Features:

Intermediate shaft bushing
Fits Dana Spicer 30 and 44 with disconnect axles

from

$99.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$10.99

Outer stub dust shield for Dana 30 XJ, TJ, YJ. 2.738″ I.D.

Product Features:

Outer stub dust shield
Fits Jeep XJ, YJ and TJ

from

$19.99

Outer axle seal to be used with set10 bearing.Yukon Mighty seal.

Product Features:

Rear axle seal
Axle bearing and seal kit for Dana 44 rear and Nissan Titan rear
For use with Set10 bearing

from

$60.99

Over time, the yoke on your SYE kit can wear out or break from extensive off-roading. Now offered as a separate component, this Mega Short SYE yoke from Rugged Ridge offers a reliable replacement and fits the Rugged Ridge 18676.70 and 18676.72 Slip Yoke E

Product Features:

Steel
Replacement Yoke for 18676.72
Limited 5 Year Warranty

from

$573.99

CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:

Built to match O.E. form, fit and function.
100% NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$5.99

Product Features:

Rear axle stud for Dana Spicer 44 and AMC Model 35
1/2″ x 20 thread
0.618″ knurl diameter
1 15/32″ long
31/64″ shoulder length

from

$14.79

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$5.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$883.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings

from

$50.99

This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$602.99

Has your front axle shaft or U-joint failed? Omix-ADA offers complete front Jeep axle shaft assemblies providing everything you need for a simple installation. Slide the old parts out and slide the new parts in. You’ll be back on the road in no time.

Product Features:

Right Side
With ABS
OE Style
Direct Fit
Limited 5 Year Warranty

from

$10.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$29.49

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Limited 12 Month Or 12,000 Mile Warranty

from

$182.99

Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:

Pinion Redi-sleeve
Fits Dana Spicer 25, 27, 30, 4 and 50

from

$17.99

Disconnect axle pilot bearing for Dana 30, 44 & 60, 0.813″ O.D.

Product Features:

Axle pilot bearing
Fits Dana Spicer 44 with disconnect axles
0.813″ O.D.

from

$10.79

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$211.99

Yukon 4340 Chrome-Moly replacement outer stub for Dana 30, Jeep JK front with a length of 6.30″ and 27 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:

Fits Jeep JK non-Rubicon front
4340 Chromoly
Outer stub
32 spline
6.3″ from end of splines to center of u-joint bore
5-760X U-joint size

from

$119.99

Yukon replacement outer stub axle shaft for ’95 and newer Dana 30, Wrangler with a length of 6.11 inches and with 27 splines. Yukon front axles come with a one year warranty against manufacturing defects.

Product Features:

Fits Jeep Wrangler and Cherokee front with Dana Spicer 30
Outer stub
27 spline
6.11″ from end of splines to center of u-joint bore

from

$123.99

Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (Set10), some flanged, Timken brand, for Dana 44 and Model 20. This axle bearing & seal kit services one side only.

Product Features:

Axle bearing and seal kit for Dana 44 rear and Nissan Titan rear
Includes axle bearing and seal
Services one side

from

$123.99

Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Bolt-in axle bearing and seal set, Set 9, Timken Brand, for Model 35 & 8.2″ Buick, Oldsmobile, Pontiac. This axle bearing & seal kit services one side only.

Product Features:

Axle bearing and seal kit for AMC Model 35 with bolt-in axles and 8.2″ in Buick, Oldsmobile and Pontiac
Includes axle bearing and seal
Tapered roller design
Services one side

from

$63.40

Wheel Bearing

from

$14.79

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Available in both caged design and full complement
Industry leading coverage
Professional technicians know they can depend on National