1992 GMC K1500 Performance and Racing Products

Below you will find various in-demand GMC Performance and Racing Products, components and accessories for your 1992 K1500. Advance Auto Parts has popular K1500 parts like Performance Fuel Systems, Performance Oil Filters, Performance Mufflers and more. You’ll also find aftermarket and OEM Performance and Racing Products for other K1500 model years including 1990, 1991, 1993, 1994, 1995, 1996, 1997, 1998, 1999 and more. Select a category of 1992 GMC K1500 Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1992 GMC K1500 Performance and Racing Products Categories

Performance Oil Filters

Performance Engine Coolant Thermostats

Performance Starters

Performance Intake Manifolds

Performance Mufflers

Performance Coils

Performance Exhaust Mufflers

Performance Distributor Cap and Rotor Kits

Performance Exhaust Headers

Performance Shifters

Performance Distributors

Performance Valve Covers

Performance Body Mounts

Performance Engine Dress-Up Kits

Performance Engine and Transmission Mounts

Performance Engine Water Pumps

Performance Radiator Caps

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Distributor Rotors

Performance Engine Harmonic Balancers

Performance Distributor Components

Performance Engine Valve Springs

Performance Engine Valve Cover Gasket Sets

Performance Spark Plug Wires

Performance Chassis Bushing Kits

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Timing Covers and Tabs

Performance Exhaust Tail Pipes

Performance Camshaft and Lifter Kits

Performance Leaf Spring Bushings

Performance Ignition Kits

Performance Valve Cover Hardware

Performance Engine Rocker Arms

Performance Universal Joints

Performance Engine Camshafts

Performance Engine Oil Pan Gaskets

Performance Ring and Pinions

Performance Ignition Parts

Performance Exhaust Pipes

Performance Intake Manifold Hardware

Performance Engine Valve Lifters

Performance Engine Main Bearing Gasket Sets

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Oil Filler Caps

Performance Engine Timing Cover Gasket Sets

Performance Engine Push Rods

Performance Brake Hose Kits

Nitrous Oxide Injection System Kit

Performance Torque Converters

Performance Transmission Pan

Performance Ignition Systems

Performance Nitrous Systems

Specialty and Racing Shifters

Performance Diesel Fuel Injection Pump

Performance Engine Valve Stem Seal Sets

Performance Transmission Kickdown Cable

Essential Performance and Racing Products for 1992 GMC K1500s

Competition Cams Xtreme Energy 240/246 Hydraulic Flat Cam, 11-250-3

from

$297.99

HYDRAULIC – Xtreme Energy: Street/strip, 2800+ stall, rough idle. 9.5:1+ compression.

from

$10.69

Installs using stock timing cover bolts. Chrome plated steel is a much better compliment to a chromed timing cover. Has markings for 16 degrees before top dead center (BTDC) to 8 degrees after top dead center (ATDC).

Spectre Chevrolet Small Block V8 Harmonic Balancer Bolt Kit, 4699

from

$8.99

Spectre’s Harmonic Balancer Bolt Kit is designed to fit Chevrolet Small Block 265-400 V8 engines. This grade 8 bolt is 2-1/2 inches long, and features a plated finish for corrosion resistance. This kit also includes a security lock washer.

Edelbrock Front Timing Cover Gasket Set, 6997

from

$18.99

Edelbrock part No: 6997 Front Timing Cover Gasket set for Small-Block Chevy. Includes front cover gasket and front seal.

MSD Ignition Harness, Msd 6 To Gm Dual-Connector Coil, 8876

from

$81.99

The harnesses plug directly into your factory coil and harness then four color coded wires plug into the corresponding wires of the MSD.

Hurst Automatic Shifter, Quarter Stick Powerglide, 3160001

from

$499.99

The Hurst Quarter Stick shifter provides positive gear change control for both street and race applications. Its compact size fits easily in race cars with limited space and is very lightweight at only 2.5 pounds. Features include black oxide coated steel construction, 1018 hardened steel gate plate, forged aluminum shift stick with 7/16-20 tpi and a classic white Hurst shift knob. Other features include factory installed neutral safety switch, chrome-plated trigger, and a spring-loaded reverse Loc/Out mechanism that complies with NHRA/IHRA safety rules. Includes all necessary hardware, a 5-foot long shifter cable, and complete installation instructions. Note: Optional aluminum mounting bracket, backup light switch and lightweight aluminum or plastic shifter covers available separately. Does not fit early GM cast iron PG transmission.

MSD Ignition Distributor, Digital E-Curve, 8394

from

$779.99

The Digital E-Curve Distributor will drop right in your engine, easily connect to the coil and fire up. There are no external controls or boxes to mount and connect, and you can set a timing curve with the twist of a rotary dial.

Flowtech Shorty Headers - Black Painted, 91830FLT

from

$363.99

“These Flow tech headers fit 1988-1995 Chevy/GMC Truck, 1500/2500, 1992-1995 Suburban, 1992-1994 Blazer/Jimmy, 1995 Tahoe/Yukon: 5.7L, Tube Size 1.5″” O.D., Black Paint, 50-State Legal header CARB EO #D-115-16.”

FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1819

from

$31.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Mr. Gasket Chrome Oil Fill Cap - Push-On Style W/Tube For Pvc Hookup - Fitting For Easy Pcv Hose Hook Up, 2063

from

$13.79

This chrome-plated steel push-on breather/oil filler cap fits over your oil filler tube. It has a side fitting for easy PCV hose (positive crankcase ventilation) hook up. Perfect compliment to Mr. Gasket matching chrome oil filler tube, #2066

Energy Suspension Extra Cab Body Mounts (2WD/4WD), 3.4122R

from

$155.99

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off. And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

FEL-PRO Performance Stainless steel core laminate Engine Cylinder Head Gasket, 1037

from

$64.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

FEL-PRO Performance Engine Crankshaft Seal Kit, 2912

from

$38.99

Carquest Remanufactured Diesel Fuel Injection Pump, AM91063

from

$727.99

CARQUEST premium remanufactured fuel injection pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is tested on a sophisticated flow bench under multiple operating parameters.

B & M Torque Converter, Nitrous Holeshot 3600, 20482

from

$799.99

B&M Nitrous HoleShot 3600 stall for 1965-91 TH400, 425 and 1968-81 TH350, 375 (Not TH350C) transmissions is an excellent choice for vehicles with engine modifications, particularly big cams that tend to reduce low end power and torque. The higher stall speed of this converter will launch the car in a higher rpm range where more torque is readily available, resulting in quicker acceleration. Nitrous Holeshot converters feature furnace brazed impeller and turbine, new precision steel alloy pump drive tube, new heavy duty needle bearings between the stator and impeller (not a thrust washer) and needle bearings between the stator and turbine. Other features include dual pattern 10.75 and 11.50-inch bolt circle, a new turbine hub, new springs and rollers in the stator and anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower that a nitrous plate system delivers. Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. These are serious converters for serious performance street cars. To prevent contamination left from worn parts being circulated in your new components causing premature wear, we strongly recommend protecting your investment by adding a B&M transmission cooler with all new transmission installations. Listed converters are NOT to be used in trans-brake applications. Not for use in trans-brake applications.

Mr. Gasket High Performance Thermostat - 160 Degree Brass & Copper, 4363

from

$31.99

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Dynomax Ultra Flo Exhaust Muffler 3 Inch Inlet ID 3 Inch Outlet ID, 17296

from

$131.99

DynoMax Ultra Flo SS Polished performance mufflers are constructed of stainless steel for lifelong durability and completely polished for show-quality shine. The unrestricted, straight-through design is dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower. Each muffler uses our excl usive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo SS Polished mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.

MSD Ignition Wire Set - Super Conductor, Chevy Tahoe/Suburban Vortec V8, 1996-1997, 32169

from

$222.99

“Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “”choke””. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.”

Accel Truck Super Tune Up Kit for GM Truck with V8 Throttle Body Engines - Tune up kit for 1987-95 GM Truck and Van with 5.0L V8 TBI Engine. Also i...

from

$265.99

Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

from

$223.99

COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

FEL-PRO Performance PERFORMANCE EXHAUST MANIFOLD GASKET SET, 1402

from

$28.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Mr. Gasket Chrome Valve Cover Wing Bolts, 9824

from

$19.59

Chrome-plated for beauty and durability, wing bolts make valve cover removal fast & easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket re-usable valve cover gasket & custom valve covers.

Energy Suspension Hyper-Flex System, 3.18104G

from

$425.99

Energy’s Hyper-Flex is superior performance polyurethane which has proven itself under the most demanding conditions on the race track, off-road and street performance driving, Hyper-Flex components do not wear or deteriorate from exposure to undercar chemicals such as oils and coolants and withstand atmospheric conditions like UV exposure and pollutants. Impervious to these elements, Energy’s Hyper-Flex components are a great value. Not only will it outlast rubber 5 to 1 but are a cost effective performance improvement for your car or truck. Whether domestic or import, front, rear or 4WD, old or new, your vehicle will achieve that level of performance that has made Energy Suspension the most asked-for name in performance polyurethane components. All Hyper-Flex components are proudly Made in America and are available in red or black.

from

$50.99

A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Mallory Distributor Wiring Harness, 29349

from

$35.49

3-wire for ignition box. PERFORMANCE PARTS>PERFORMANCE IGNITION/STARTING/CHARGING>IGNITION>IGNITION ACCESSORIES & OTHER from Mallory

Competition Cams XE 218/224 Hydraulic Roller Cam and Lifter Kit, CL11-422-8

from

$1225.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

Dynomax Super Turbo Exhaust Muffler 2.5 Inch Inlet ID 2.5 Inch Outlet ID, 17749

from

$131.99

DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Super Turbo mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.

B & M Throttle Valve Cable, Th700R4 Transmission, 70242

from

$72.29

These universal fit adjustable cables will work in 95% of all listed transmission applications, yet are less expensive than OE models. Use as straight replacement cable or ease the installation of transmission swaps.

Upgrade your 1992 GMC K1500 with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1992 GMC K1500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Performance and Racing Products are key to keeping your K1500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 188 Performance and Racing Products for the 1992 GMC K1500, designed to meet your needs without breaking the bank. From Performance Fuel System replacements to Performance Oil Filters upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1992 GMC K1500 at great prices. Our Performance and Racing Products inventory for this model ranges from just $5.99 to $1,399.99, with an average price of $256.13. Our 188 Performance and Racing Products in stock come from 30 trusted brands, so you’re sure to find the right part for your 1992 GMC K1500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1992 GMC K1500, we stock popular OEM and aftermarket Performance and Racing Products from top names like MSD Ignition, B & M, FEL-PRO Performance, and more. MSD Ignition Performance and Racing Products start at just $81.99 and boast an impressive 4.3 stars average rating from customers. B & M and FEL-PRO Performance also bring quality to the table, with Performance and Racing Products available starting at $32.99, and at an average 4.3 stars rating. With 1,648 customer reviews and counting, our 1992 GMC K1500 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1992 GMC K1500 is always ready to roll. We’re committed to providing you with everything you need to keep your K1500 in top shape, all in one place. Start shopping confidently below for your 1992 GMC K1500!

Best-Selling Performance Fuel Systems for 1992 GMC K1500s

Enhance the driving experience in your GMC with 1 quality Performance Fuel System components, starting at $727.99.

show more show less

from

$727.99

Most Popular 1992 GMC K1500 Performance Oil Filters

Customize your GMC with 3 Performance Oil Filters products like Performance Oil Filters and Performance Oil Filler Caps, all priced under $18.99.

show more show less

K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2001

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002

from

$18.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

from

$13.79

Top Picks for 1992 GMC K1500 Performance Mufflers

Upgrade GMC K1500s with top-quality Performance Mufflers parts, including 6 OEM and aftermarket selections for your 1992 model.

show more show less

Dynomax Ultra Flo Exhaust Muffler 3 Inch Inlet ID 2.5 Inch Outlet ID, 17519

from

$131.99

Flowmaster Inc. 40 Delta Flow Muffler - 3.00 Center In - 2.50 Dual Out - Aggressive Sound, 9430402

from

$149.99

This two chamber design incorporates Flowmaster’s Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$131.99

Dynomax Ultra Flo Exhaust Muffler 3 Inch Inlet ID 2.5 Inch Outlet ID, 17273

from

$482.99

Flowmaster Inc. Super 40 Muffler - 3.00 Center In - 2.50 Dual Out - Aggressive Sound, 9530452

from

$173.99

The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow&reg technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

Flowmaster Inc. 40 Delta Muffler 409S - 3.00 Center In - 2.50 Dual Out - Aggressive Sound, 8430402

from

$170.99

This two chamber design incorporates Flowmaster’s Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

In-Demand Performance Ignition Products for 1992 GMC K1500s

Select from 12 premium Performance Ignition Products parts for your 1992 GMC K1500, with prices ranging from $35.49 to $519.99.

show more show less

from

$81.99

The harnesses plug directly into your factory coil and harness then four color coded wires plug into the corresponding wires of the MSD.

from

$99.99

Requires a 1.4 ohms Ballast resistor, Loom resistor or internally resisted coil.

MSD Ignition Ignition Coil, Gm External Hei, High Performance, 8226

from

$82.99

Top off your GM Ignition system with these great new replacement coils. The GM Coils have MSD performance in factory-style housings. MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks.

MSD Ignition Wire Set - Street Fire, Multi-Angle Plug, HEI, Universal, 5550

from

$81.99

The Street Fire Spark Plug Wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve.

MSD Ignition Ignition Coil, Direct-Fit Replacement, High Energy Output, Easy Installation, 5526

from

$74.99

GM Dual connector coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red

from

$91.99

Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Accel Spark Plug Wire Set - Extreme 9000 Ceramic Boot - Chevy/GMC 85-97 5.0/5.7L TBI - This custom fit extreme heat ceramic boot spark plug wire se...

from

$267.99

ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 Ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.

MSD Ignition Wire Set - Super Conductor, Chevy Truck 305-350, 1985-On, 31419

from

$173.99

“Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire, incredibly low resistance without electronic interference. In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “”choke””. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps, one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps, one for the sleeve of the wire and another separate crimp to grasp the conductor.”

JBA Performance W0840 Ignition Wires 88-95 GM 4.3L Full Size Truck Red

from

$104.99

JBA PowerCables ignition wires are less than half the resistance of most factory wires, which frees sparkenergy and increases performance! Get as much as 5+ hp gain with JBA PowerCables as tested by CarCraft Magazine.

from

$35.49

3-wire for ignition box. PERFORMANCE PARTS>PERFORMANCE IGNITION/STARTING/CHARGING>IGNITION>IGNITION ACCESSORIES & OTHER from Mallory

"MSD Ignition Crank Trigger Kit, Small Block Chevy, 6"" Balancer, 8600"

from

$519.99

For a long time, racers have known that one of the best things to do to an engine to improve performance is to stabilize the ignition timing. The MSD Flying Magnet Crank Trigger system does exactly that by using four magnets embedded in an aluminum wheel. Although similar in appearance to other crank triggers, the MSD Flying Magnet design works on a different principle. Most crank triggers have a wheel, with steel studs sticking out, bolted to the harmonic balancer. As the crankshaft turns, the studs pass by a stationary magnetic pick-up, triggering the ignition. This pick-up can be triggered by other bolts, debris, or even vibrations which will cause a loss of power or engine damage.

Mallory Promaster Classic Series Ignition Coil, 29440

from

$204.99

The Mallory Promaster Classic series ignition coil is designed to meet today’s specialized ignition requirements. This coil features a faster rise time and increased spark duration (compared to stock) to increase performance. It has a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. This coil also offers excellent wire retention with a spark plug type secondary post, and brass contact terminals.

Most Sold 1992 GMC K1500 Performance Engines

Explore our best-selling GMC parts for the 1992 K1500 among 68 OEM and aftermarket options starting from $8.99.

show more show less

FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1003

from

$42.49

FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1004

from

$44.99

from

$8.99

FEL-PRO Performance Engine Valve Cover Gasket Set, 1603

from

$31.99

Edelbrock Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish, 2104

from

$346.99

Edelbrock part #2104 Performer intake manifold is designed for street 262-400 c.i.d. Chevy V8’s that have heads with canted center bolt holes, 1987-1995. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. For 1987-95 stock aluminum heads use #2101.

FEL-PRO Performance PERFORMANCE VALVE COVER GASKET SET, 1602

from

$23.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Mr. Gasket Intake Manifold Bolt Set, 6091

from

$39.29

These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

from

$31.99

Mr. Gasket Intake Manifold Bolt Set - Hex Head, 955G

from

$18.79

These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Edelbrock Performer-Plus Camshaft Kit for 1976-95 Small Block Chevrolet, 3702

from

$322.99

“Edelbrock part No: 3702 Performer-Plus camshaft is designed for small-block Chevy 305-350 T.B.I & LG-4 V-8 applications. This Edelbrock cam kit produced 245 ft-lbs. of torque when used with No: 3701 intake and stock iron cylinder heads on a 350 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions. Camshaft Specifications: – Duration at .050 Intake: 194 degrees – Duration at .050 Exhaust: 214 degrees – Lift at Valve Intake: .398″” – Lift at Valve Exhaust: .442″” – Lobe Separation: 112 Degrees – Intake Centerline: 107 Degrees – Idle Vacuum at 1000 RPM’s: 16″””

Competition Cams High Energy/Marine 218/218 Hydraulic Flat Cam/Lifter Kit, CL12-210-2

from

$898.99

SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – High Energy: Good street performance with stock converter, choppy idle. OR High Energy Marine: Biggest cam for inboard/outboard. Good for ski, economy and light performance.

Competition Cams Big Mutha' Thumpr 243/257 Hydraulic Flat Cam/Lifter Kit, CL12-602-4

from

$397.99

SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.

from

$259.99

Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

from

$10.99

Spectre’s Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.

Mr. Gasket Intake Manifold Bolt Set - Socket Head, 956G

from

$21.49

These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers.

Competition Cams OE-Style Hydraulic Roller Lifter Set for '87+ OE Roller SBC and LT/LS Engines, 850-16

from

$288.99

COMP Cams Hydraulic Roller Lifters are a performance upgrade for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks. The roller wheel decreases friction and increases longevity when compared to flat tappet lifters. Hydraulic roller lifters can handle much more aggressive cam profiles than flat tappets unlocking performance potential.

FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1010

from

$51.99

from

$223.99

FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1886

from

$63.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Competition Cams Magnum 224/224 Hydraulic Flat Cam, 12-211-2

from

$293.99

HYDRAULIC – Magnum: High performance. Biggest cam with stock converter but better with 2000+ stall. Use lower gears. Mild rough idle.

Spectre Engine Kit SB Chev Ctr Bolt, 5428

from

$106.99

This Spectre engine dress-up kit was designed for the 1987 – 1995 Chevy 305 & 350 engines. This kit includes: stock height valve covers, chrome valve cover T-bolts, chrome oil filler cap, chrome PCV breather, grommets, and an air cleaner adapter stud. The air filter adapter stud, is a z-bolt that is designed to allow you to use a center stud style air cleaner assembly instead of the stock dual-stud setup. Manufactured using high quality materials this kit features triple chrome plated parts.

"Competition Cams Valve Springs, 1.250"" Single 1 St, 981-16"

from

$111.99

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.

FEL-PRO Performance PERFORMANCE REAR MAIN SEAL SET, 2919

from

$37.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Mr. Gasket Complete Engine Bolt Kit, 5001

from

$223.99

This Mr. Gasket Deluxe Engine Bolt Kit includes chrome plated grade 5 hex head fasteners with AN type washers for the following: Intake Manifold, Timing Cover, Oil Pan, Fuel Pump, Water Neck, Long Water Pump and Headers. The AN washers have no exposed shoulder which offers a professional appearance.

Top-Rated Performance and Racing Products Brands For Your 1992 GMC K1500

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1992 GMC K1500s. Below you’ll find some of our best rated Performance and Racing Products from MSD Ignition, B & M, and FEL-PRO Performance, and more. Performance and Racing Products from these brands that fit a 1992 K1500 start at just $32.99 and are rated as high as 4.3 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular MSD Ignition 1992 GMC K1500 Performance and Racing Products

When it comes to maintaining or upgrading your 1992 GMC K1500, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. MSD Ignition ticks all of those boxes. We offer a wide selection of MSD Ignition Performance and Racing Products, specifically designed for the 1992 GMC K1500. With over 3 MSD Ignition brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $81.99, with an average price of just $188.32. Plus, with over 7 customer reviews and an average rating of 4.3 stars, you can trust that our MSD Ignition Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

MSD Ignition Distributor, Chevy V8, Pro-Billet, With Cap And Rotor, 85551

from $399.99

(1)

MSD Ignition Distributor, Chevy V8, Pro-Billet, With Cap And Rotor, 85551

“Have used this distributor in several engine builds without any issues. Works great when timing is locked also. Won’t use anything else.”

from $82.99

(3)

MSD Ignition Ignition Coil, Gm External Hei, High Performance, 8226

“This product is great, I also installed the msd cap and rotor and an msd ingnition 6a These products togeather create performace and a little more pow”

from $81.99

(3)

MSD Ignition Harness, Msd 6 To Gm Dual-Connector Coil, 8876

“Great”

Popular B & M 1992 GMC K1500 Performance and Racing Products

B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1992 GMC K1500 owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1992 K1500, Advance Auto Parts carries a full inventory of 3 B & M Performance and Racing Products. Plus you will be keeping your GMC in peak condition while saving money because prices on these B & M Performance and Racing Products range from $299.99 to $549.99, plus, with more than 15 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

B & M Automatic Shifter - Unimatic - Universal, 80775

from $299.99

(3)

B & M Automatic Shifter – Unimatic – Universal, 80775

“Super easy to install, works nice.”

B & M Automatic Shifter - Megashifter - Universal, 80690

from $549.99

(1)

B & M Automatic Shifter – Megashifter – Universal, 80690

“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”

B & M Automatic Shifter - Z-Gate - Universal, 80681

from $299.99

(11)

B & M Automatic Shifter – Z-Gate – Universal, 80681

“Husband has been redoing his ford truck and I over heard him say he needed a shifter I went and bought him this shifter and he loves it very easy to p”

FAQs for 1992 GMC K1500 Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1992 GMC K1500s?

Out of 188 Performance and Racing Products that fit 1992 GMC K1500s, the following parts are the top sellers:

K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002 (6120022) – $18.99
K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2001 (6120007) – $17.99
Mr. Gasket High Performance Thermostat – 160 Degree Brass & Copper, 4363 (17360031) – $31.99

What’s the price range for 1992 GMC K1500 Performance and Racing Products?

Performance and Racing Product prices for the 1992 GMC K1500 start at $5.99 and go up to $1,399.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1992 GMC K1500?

The average price for Performance and Racing Products for the 1992 GMC K1500 is $256.13. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other GMC K1500 model years?

Yes, we currently carry Performance and Racing Products for 18 model years of GMC K1500s between 1979 and 1999. Performance and Racing Products are bought most frequently for the following model years: 1999, 1998, 1997, 1996, 1995, 1994, 1993, 1991, and 1990.

What are the cheapest Performance and Racing Products for my 1992 GMC K1500?

The cheapest 1992 GMC K1500 Performance and Racing Products we carry in stock are:

Energy Suspension Tie Rod Dust Boot, 9.13101R (17360821) – $5.99
Energy Suspension Tie Rod End Boot (Octagon) – 2-Pack, 9.13102G (22906874) – $6.29
Spectre Chevrolet Small Block V8 Harmonic Balancer Bolt Kit, 4699 (22905376) – $8.99
Mr. Gasket Chrome Timing Tab, 4593 (5027756) – $10.69
Spectre Bolt Kit Intake Hex Head, 4652 (22905656) – $10.99

What are the top-rated Performance and Racing Products that fit the 1992 GMC K1500?

Out of 1,648 reviews by customers, our 1992 GMC K1500 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1992 GMC K1500 and their top-rated products:

Performance Oil Filters
- K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2001 (6120007) – $17.99
- K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002 (6120022) – $18.99
Performance Shifters
- K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2001 (6120007) – $17.99
- K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002 (6120022) – $18.99
Performance Mufflers
- K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2001 (6120007) – $17.99
- K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002 (6120022) – $18.99

What types of Performance and Racing Products do you sell for my 1992 GMC K1500?

As of 8/2/26, these are some of the most in-demand types of Performance and Racing Products for a 1992 GMC K1500:

Can I get help with 1992 GMC K1500 Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Performance and Racing Products and more.

What is your return policy for GMC K1500 Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new GMC K1500 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1992 GMC K1500 Performance and Racing Products

Competition Cams – Competition Cams Xtreme Energy 240/246 Hydraulic Flat Cam, 11-250-3 (Part No.11-250-3)

Mr. Gasket – Mr. Gasket Chrome Timing Tab, 4593 (Part No.4593)

Spectre – Spectre Chevrolet Small Block V8 Harmonic Balancer Bolt Kit, 4699 (Part No.4699)

Edelbrock – Edelbrock Front Timing Cover Gasket Set, 6997 (Part No.6997)

MSD Ignition – MSD Ignition Harness, Msd 6 To Gm Dual-Connector Coil, 8876 (Part No.8876)

Hurst – Hurst Automatic Shifter, Quarter Stick Powerglide, 3160001 (Part No.3160001)

MSD Ignition – MSD Ignition Distributor, Digital E-Curve, 8394 (Part No.8394)

Flowtech – Flowtech Shorty Headers – Black Painted, 91830FLT (Part No.91830FLT)

FEL-PRO Performance – FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1819 (Part No.1819)

Mr. Gasket – Mr. Gasket Chrome Oil Fill Cap – Push-On Style W/Tube For Pvc Hookup – Fitting For Easy Pcv Hose Hook Up, 2063 (Part No.2063)

Energy Suspension – Energy Suspension Extra Cab Body Mounts (2WD/4WD), 3.4122R (Part No.3.4122R)

FEL-PRO Performance – FEL-PRO Performance Stainless steel core laminate Engine Cylinder Head Gasket, 1037 (Part No.1037)

FEL-PRO Performance – FEL-PRO Performance Engine Crankshaft Seal Kit, 2912 (Part No.2912)

Carquest Premium – Carquest Remanufactured Diesel Fuel Injection Pump, AM91063 (Part No.AM91063)

B & M – B & M Torque Converter, Nitrous Holeshot 3600, 20482 (Part No.20482)

Mr. Gasket – Mr. Gasket High Performance Thermostat – 160 Degree Brass & Copper, 4363 (Part No.4363)

Dynomax – Dynomax Ultra Flo Exhaust Muffler 3 Inch Inlet ID 3 Inch Outlet ID, 17296 (Part No.17296)

MSD Ignition – MSD Ignition Wire Set – Super Conductor, Chevy Tahoe/Suburban Vortec V8, 1996-1997, 32169 (Part No.32169)

Accel – Accel Truck Super Tune Up Kit for GM Truck with V8 Throttle Body Engines – Tune up kit for 1987-95 GM Truck and Van with 5.0L V8 TBI Engine. Also i… (Part No.TST4)

Competition Cams – Competition Cams Valve Seals, 503-16 (Part No.503-16)

FEL-PRO Performance – FEL-PRO Performance PERFORMANCE EXHAUST MANIFOLD GASKET SET, 1402 (Part No.1402)

Mr. Gasket – Mr. Gasket Chrome Valve Cover Wing Bolts, 9824 (Part No.9824)

Energy Suspension – Energy Suspension Hyper-Flex System, 3.18104G (Part No.3.18104G)

Energy Suspension – Energy Suspension Motor Mount, 3.1121G (Part No.3.1121G)

Mallory – Mallory Distributor Wiring Harness, 29349 (Part No.29349)

Competition Cams – Competition Cams XE 218/224 Hydraulic Roller Cam and Lifter Kit, CL11-422-8 (Part No.CL11-422-8)

Dynomax – Dynomax Super Turbo Exhaust Muffler 2.5 Inch Inlet ID 2.5 Inch Outlet ID, 17749 (Part No.17749)

B & M – B & M Throttle Valve Cable, Th700R4 Transmission, 70242 (Part No.70242)

Carquest Premium – Carquest Remanufactured Diesel Fuel Injection Pump, AM91063 (Part No.AM91063)

K&N – K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2001 (Part No.HP-2001)

K&N – K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002 (Part No.HP-3002)

Mr. Gasket – Mr. Gasket Chrome Oil Fill Cap – Push-On Style W/Tube For Pvc Hookup – Fitting For Easy Pcv Hose Hook Up, 2063 (Part No.2063)

Dynomax – Dynomax Ultra Flo Exhaust Muffler 3 Inch Inlet ID 2.5 Inch Outlet ID, 17519 (Part No.17519)

Flowmaster Inc. – Flowmaster Inc. 40 Delta Flow Muffler – 3.00 Center In – 2.50 Dual Out – Aggressive Sound, 9430402 (Part No.9430402)

Dynomax – Dynomax Super Turbo Exhaust Muffler 2.5 Inch Inlet ID 2.5 Inch Outlet ID, 17749 (Part No.17749)

Dynomax – Dynomax Ultra Flo Exhaust Muffler 3 Inch Inlet ID 2.5 Inch Outlet ID, 17273 (Part No.17273)

Flowmaster Inc. – Flowmaster Inc. Super 40 Muffler – 3.00 Center In – 2.50 Dual Out – Aggressive Sound, 9530452 (Part No.9530452)

Flowmaster Inc. – Flowmaster Inc. 40 Delta Muffler 409S – 3.00 Center In – 2.50 Dual Out – Aggressive Sound, 8430402 (Part No.8430402)

MSD Ignition – MSD Ignition Harness, Msd 6 To Gm Dual-Connector Coil, 8876 (Part No.8876)

Mallory – Mallory Unilite Ignition Module, 605 (Part No.605)

MSD Ignition – MSD Ignition Ignition Coil, Gm External Hei, High Performance, 8226 (Part No.8226)

MSD Ignition – MSD Ignition Wire Set – Street Fire, Multi-Angle Plug, HEI, Universal, 5550 (Part No.5550)

MSD Ignition – MSD Ignition Ignition Coil, Direct-Fit Replacement, High Energy Output, Easy Installation, 5526 (Part No.5526)

PerTronix – PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)

Accel – Accel Spark Plug Wire Set – Extreme 9000 Ceramic Boot – Chevy/GMC 85-97 5.0/5.7L TBI – This custom fit extreme heat ceramic boot spark plug wire se… (Part No.9020C)

MSD Ignition – MSD Ignition Wire Set – Super Conductor, Chevy Truck 305-350, 1985-On, 31419 (Part No.31419)

JBA Performance – JBA Performance W0840 Ignition Wires 88-95 GM 4.3L Full Size Truck Red (Part No.W0840)

Mallory – Mallory Distributor Wiring Harness, 29349 (Part No.29349)

MSD Ignition – "MSD Ignition Crank Trigger Kit, Small Block Chevy, 6"" Balancer, 8600" (Part No.8600)

Mallory – Mallory Promaster Classic Series Ignition Coil, 29440 (Part No.29440)

FEL-PRO Performance – FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1003 (Part No.1003)

FEL-PRO Performance – FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1004 (Part No.1004)

Spectre – Spectre Chevrolet Small Block V8 Harmonic Balancer Bolt Kit, 4699 (Part No.4699)

FEL-PRO Performance – FEL-PRO Performance Engine Valve Cover Gasket Set, 1603 (Part No.1603)

Edelbrock – Edelbrock Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish, 2104 (Part No.2104)

FEL-PRO Performance – FEL-PRO Performance PERFORMANCE VALVE COVER GASKET SET, 1602 (Part No.1602)

Mr. Gasket – Mr. Gasket Intake Manifold Bolt Set, 6091 (Part No.6091)

Mr. Gasket – Mr. Gasket High Performance Thermostat – 160 Degree Brass & Copper, 4363 (Part No.4363)

Mr. Gasket – Mr. Gasket Intake Manifold Bolt Set – Hex Head, 955G (Part No.955G)

Edelbrock – Edelbrock Performer-Plus Camshaft Kit for 1976-95 Small Block Chevrolet, 3702 (Part No.3702)

Competition Cams – Competition Cams High Energy/Marine 218/218 Hydraulic Flat Cam/Lifter Kit, CL12-210-2 (Part No.CL12-210-2)

Competition Cams – Competition Cams Big Mutha’ Thumpr 243/257 Hydraulic Flat Cam/Lifter Kit, CL12-602-4 (Part No.CL12-602-4)

Weiand – Weiand Action Plus Water Pumps, 9240P (Part No.9240P)

Spectre – Spectre Bolt Kit Intake Hex Head, 4652 (Part No.4652)

Mr. Gasket – Mr. Gasket Intake Manifold Bolt Set – Socket Head, 956G (Part No.956G)

Competition Cams – Competition Cams OE-Style Hydraulic Roller Lifter Set for ’87+ OE Roller SBC and LT/LS Engines, 850-16 (Part No.850-16)

FEL-PRO Performance – FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1010 (Part No.1010)

Competition Cams – Competition Cams Valve Seals, 503-16 (Part No.503-16)

FEL-PRO Performance – FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1886 (Part No.1886)

Competition Cams – Competition Cams Magnum 224/224 Hydraulic Flat Cam, 12-211-2 (Part No.12-211-2)

Spectre – Spectre Engine Kit SB Chev Ctr Bolt, 5428 (Part No.5428)

Competition Cams – "Competition Cams Valve Springs, 1.250"" Single 1 St, 981-16" (Part No.981-16)

FEL-PRO Performance – FEL-PRO Performance PERFORMANCE REAR MAIN SEAL SET, 2919 (Part No.2919)

Mr. Gasket – Mr. Gasket Complete Engine Bolt Kit, 5001 (Part No.5001)