1992 Ford Ranger Transmission Parts

Below you will find various in-demand Ford Transmission Parts, components and accessories for your 1992 Ranger. Advance Auto Parts has popular Ranger parts like Automatic Transmission Parts, Transmission Seals, Transmission Mounts and more. You’ll also find aftermarket and OEM Transmission Parts for other Ranger model years including 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2019, 2020 and more. Select a category of 1992 Ford Ranger Transmission Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1992 Ford Ranger Transmission Parts Categories

Manual Transmission Shifter Repair Kits

Transmission Torque Converters

OE Transmission Coolers

Transfer Shaft Bearing

Manual Transmission Differential Bearings

Gear Shift Rod Bushings

Master and Slave Cylinder Assemblies

Transmission Oil Cooler Lines

Countershaft Bearings

Manual Transmission Output Shaft Bearings

Transmission Pan Gaskets

Transmission Oil Cooler Fittings

Automatic Transmission Line Connectors

Pinion Bearings

Transmission Mounts

Transmission Master Repair Kits

Back Up and Neutral Safety Switches

Transmission Rebuild Kits

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Speed Sensors

Transmission Bushings

Automatic Transmission Control Shaft Seals

Automatic Transmission Oil Pump Seals

Transmission Modulator Valves

Pinion Seals

Neutral Safety Switch Connectors

Transmission Seals and O-rings

Back Up Light Switch Connectors

Manual Transmission Bearing and Seal Overhaul Kits

Torque Converter Seals

Extension Housing Seals

Manual Transmission Output Shaft Seals

Gear Shift Lever Bushing

Miscellaneous Automatic Transmission Seals

Transmission Shift Kits

Input Shaft Bearings

Back Up Lamp Connectors

Transmission Bands

Automatic Transmission Flexplate Mounting Bolts

Automatic Transmission Output Shaft Bearings

Shift Shaft Seals

Automatic Transmission Fluid Filler Tube Seals

Manual Transmission Seals

Auxiliary Shaft Seals

Front Pump Seals

Manual Transmission Bearing

Automatic Transmission Repair Sleeve

Essential Transmission Parts for 1992 Ford Rangers

from

$11.99

These replacement automatic transmission shift lever control rod bushings have been made to match the function and performance of the original bushings on select vehicle years, makes and models.

Product Features:

Direct replacement – these replacement auto trans shift lever control rod bushings match the original equipment design on specified vehicles
Conveniently fix- simple solution to address worn bushings and restore original performance and feel
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$60.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$6.69

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$13.29

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$11.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today¿s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -80 deg. F to 350 deg. F / -62 deg. C to 176 deg. C
Good dry heat resistance
Excellent low temperature capability
Delivers quality and reliable performance for every type of repair

from

$37.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$329.99

The release system is the connection between pedal and clutch and it has a decisive influence on the driving experience. To ensure that the clutch is easy to operate and that the power flow can be safely metered, all components of the release system must work perfectly together. Under its LuK brand, Schaeffler has played a decisive role in the development of hydraulic clutch actuation technology. LuK offers all components of the release system as spare parts for the independent market in case of a defect, with OE quality.

Product Features:

At the core of every LuK Clutch Master Cylinder lies a dedication to precision engineering. Each cylinder is meticulously designed and manufactured to exacting standards, ensuring seamless integration with the vehicle’s clutch system.
LuK employs advanced materials and manufacturing techniques to optimize the performance of their master cylinders, resulting in smooth and precise clutch engagement in every driving situation.
LuK products are equipped with an integrated travel sensor where needed. This senses the position of the clutch pedal. This is important for start-stop systems and functions like electric parking brake, hill-start and speed control.
The LuK Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Where required LuK Master Cylinders have a peak torque limiter. It reduces the volume flow in the hydraulic system during sport driving. This prevents overloading the powertrain from sudden starts, like when slipping off the clutch pedal.

from

$193.99

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features:

Meets or exceeds OE specifications

from

$23.99

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$10.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$52.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Neutral Safety Switch prevents the engine from starting unless the transmission is in neutral or park, enhancing safety by reducing the risk of accidental movement while starting the vehicle. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$30.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$8.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$23.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$55.99

On certain Ford and Mercury vehicles, when an original equipment transmission pan is Leaking in need of routine service, loosening and lowering that fluid-filled pan is a messy business. This Dorman OE FIX transmission oil pan is designed to match the performance of the original equipment pan but features a convenient drain plug to allow the transmission fluid to be removed before service. This steel pan is also upgraded with an E-coat finish for excellent resistance to corrosion, and includes a filter assembly, gasket and integrated magnet for a complete repair solution.

Product Features:

Service-friendly – this transmission fluid pan for specified vehicles features an integrated drain plug to allow the trans fluid to be drained before servicing the pan, eliminating messy spills
Durable design – with an E- coat finish and constructed to strict specifications, this upgraded pan is engineered to withstand corrosion, impacts and leaks for a long and reliable service life
Complete solution – includes pan with integrated magnet, filter assembly and gasket for a hassle-free, professional repair
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$24.29

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$4.29

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$13.29

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$108.99

AT SHIFT KIT

from

$106.99

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
O-rings or seals are included (where applicable)
Weather-tight connectors prevent leaks and corrosion for longer life
Includes all necessary brackets and grommets for easier installation
Extensive design validation testing and 100% end-of-line tested
Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$14.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$41.49

ATP Automatic Transmission Modulator Valve

from

$4.99

Product Features:

Brand may vary by location

from

$7.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$169.99

AT OVERHAUL KIT

from

$12.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission line fitting kit
GM, Jeep; 5/8″-18 inverted flare
Helps simplify transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines
Crafted from high-quality material that makes it durable and longer-lasting
A high quality, direct fit OE replacement
Easily connects the transmission cooler line to the cooler hose
Coated for extra protection against corrosion
Crafted from high-quality material that makes it durable and longer-lasting
A high quality, direct fit OE replacement
Easily connects the transmission cooler line to the cooler hose
Coated for extra protection against corrosion

from

$9.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission line fitting kit
Ford
Helps simplify transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines
Crafted from high-quality material that makes it durable and longer-lasting
A high quality, direct fit OE replacement
Easily connects the transmission cooler line to the cooler hose
Coated for extra protection against corrosion
Crafted from high-quality material that makes it durable and longer-lasting
A high quality, direct fit OE replacement
Easily connects the transmission cooler line to the cooler hose
Coated for extra protection against corrosion

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission line fitting kit
Ford; 1/2″-20 inverted flare, deep thread
Helps simplify transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines
Crafted from high-quality material that makes it durable and longer-lasting
A high quality, direct fit OE replacement
Easily connects the transmission cooler line to the cooler hose
Hose clamps required
Crafted from high-quality material that makes it durable and longer-lasting
A high quality, direct fit OE replacement
Easily connects the transmission cooler line to the cooler hose
Hose clamps required

Upgrade your 1992 Ford Ranger with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 1992 Ford Ranger, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Transmission Parts are key to keeping your Ranger functioning at its best. At Advance Auto Parts, we offer a wide selection of 95 Transmission Parts for the 1992 Ford Ranger, designed to meet your needs without breaking the bank. From Automatic Transmission Part replacements to Transmission Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1992 Ford Ranger at great prices. Our Transmission Parts inventory for this model ranges from just $3.99 to $329.99, with an average price of $52.31. Our 95 Transmission Parts in stock come from 18 trusted brands, so you’re sure to find the right part for your 1992 Ford Ranger without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1992 Ford Ranger, we stock popular OEM and aftermarket Transmission Parts from top names like National, Driveworks, Imperial, and more. National Transmission Parts start at just $8.99 and boast an impressive 4.3 stars average rating from customers. Driveworks and Imperial also bring quality to the table, with Transmission Parts available starting at $6.49, and at an average 4.2 stars rating. With 1,542 customer reviews and counting, our 1992 Ford Ranger Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1992 Ford Ranger is always ready to roll. We’re committed to providing you with everything you need to keep your Ranger in top shape, all in one place. Start shopping confidently below for your 1992 Ford Ranger!

Best-Selling Automatic Transmission Parts for 1992 Ford Rangers

Enhance the driving experience in your Ford with 5 quality Automatic Transmission Part components, starting at $4.29.

show more show less

from

$4.29

AT SOLENOID SEAL

from

$41.49

ATP Automatic Transmission Modulator Valve

from

$5.99

ManTransShftLvrBush

from

$102.99

AUTO TRANS BAND

from

$62.99

The FAG repair sleeve is a precision element that provides additional sealing for damaged shafts. Made of heat-treated stainless steel, the FAG repair sleeve signifcantly increases the life of the shaft and prevents premature wear. Since no shaft removal or machining is required during the repair, the repair sleeve is a cost effective repair solution to protect damaged surfaces.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Most Popular 1992 Ford Ranger Transmission Seals

Customize your Ford with 19 Transmission Seals products like Pinion Seals, Transmission Seals and O-rings, and Manual Transmission Output Shaft Seals, all priced under $298.99.

show more show less

from

$13.29

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$9.99

Design type: spring loaded; multi-lip
Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
Good dry heat resistance
Excellent low temperature capability
Delivers quality and reliable performance for every type of repair

from

$10.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$13.29

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$6.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$7.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$21.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$7.49

AT CONTR SHAFT SEAL

from

$7.29

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$16.49

Product Features:

Brand may vary by location

from

$14.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$7.99

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$298.99

ManTransBrg-SealKit

from

$232.99

ManTransBrg-SealKit

from

$43.49

Product Features:

Brand may vary by location

from

$23.99

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$14.29

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$13.29

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$5.99

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

Top Picks for 1992 Ford Ranger Transmission Mounts

Upgrade Ford Rangers with top-quality Transmission Mounts parts, including 3 OEM and aftermarket selections for your 1992 model.

show more show less

from

$25.99

Anchor 2639 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1983-2012
Weight approx: 4 Lbs
With Interlock

from

$28.99

Anchor 2666 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1990-2002
Weight approx: 4 Lbs
Mount Holes On Center: 5.5 In. /139.7 mm
Studs On Center: 3.15 Inch/80.00 Mm
Height: 2.94 Inch/74.68 Mm
Note: Interlock

from

$79.99

TransMt

In-Demand Transmission Cooler and Parts for 1992 Ford Rangers

Select from 12 premium Transmission Cooler and Parts parts for your 1992 Ford Ranger, with prices ranging from $11.99 to $85.99.

show more show less

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$55.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$40.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$79.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$60.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

Most Sold 1992 Ford Ranger Transmission Bearings

Explore our best-selling Ford parts for the 1992 Ranger among 17 OEM and aftermarket options starting from $4.29.

show more show less

from

$8.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$8.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$16.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$25.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$16.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$15.99

Driveworks wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, Driveworks bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.

Product Features:

Depending on the application, specified Driveworks wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
Engineered, manufactured, and tested to meet or exceed OE specifications
Integrated seal design improves contamination resistance for a longer bearing life
High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
Manufactured from high quality steel to maximize durability under even the harshest driving conditions
Brand may vary by location

from

$10.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$4.29

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$7.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$11.29

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$43.99

We develop and produce high-quality roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$40.99

We develop and produce high-quality roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.

Product Features:

Radial Ball Bearing, Both Sides Shield.
Coverage of classic and new high-tech solutions for the best system coverage

from

$24.29

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$23.79

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$16.49

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$9.79

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$6.69

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Top-Rated Transmission Parts Brands For Your 1992 Ford Ranger

Shop for the best-rated brands offering Transmission Parts and other products for your 1992 Ford Rangers. Below you’ll find some of our best rated Transmission Parts from National, Driveworks, and Imperial, and more. Transmission Parts from these brands that fit a 1992 Ranger start at just $6.49 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 1992 Ford Ranger Transmission Parts

When it comes to maintaining or upgrading your 1992 Ford Ranger, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 1992 Ford Ranger. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.99, with an average price of just $9.99. Plus, with over 23 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $9.99

(16)

Multi-Purpose Seal

“worked well”

from $10.99

(3)

Multi-Purpose Seal

“Perfect part at a fair price”

from $8.99

(4)

Bearing Race

“Goes with M88010 bearing cup. Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”

Popular Driveworks 1992 Ford Ranger Transmission Parts

Driveworks auto parts is one of the highest quality Transmission Part brands in the market. Any 1992 Ford Ranger owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1992 Ranger, Advance Auto Parts carries a full inventory of 3 Driveworks Transmission Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Driveworks Transmission Parts range from $6.49 to $13.29, plus, with more than 58 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $13.29

(2)

Oil Seal

“Fit well”

from $8.99

(47)

Taper Bearing Set

“good”

from $6.49

(9)

Oil Seal

“Good price works fine”

FAQs for 1992 Ford Ranger Transmission Parts

Which Transmission Parts are best-sellers for 1992 Ford Rangers?

Out of 95 Transmission Parts that fit 1992 Ford Rangers, the following parts are the top sellers:

Taper Bearing Set (5050499) – $8.99
Multi-Purpose Seal (3268012) – $13.29
Econo-Kool Transmission Oil Cooler (6014720) – $40.99

What’s the price range for 1992 Ford Ranger Transmission Parts?

Transmission Part prices for the 1992 Ford Ranger start at $3.99 and go up to $329.99 for the most premium parts.

What’s the average price of a Transmission Part for a 1992 Ford Ranger?

The average price for Transmission Parts for the 1992 Ford Ranger is $52.31. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Ford Ranger model years?

Yes, we currently carry Transmission Parts for 35 model years of Ford Rangers between 1983 and 2026. Transmission Parts are bought most frequently for the following model years: 2020, 2019, 2011, 2010, 2009, 2008, 2007, 2006, and 2005.

What are the cheapest Transmission Parts for my 1992 Ford Ranger?

The cheapest 1992 Ford Ranger Transmission Parts we carry in stock are:

ManTrans Cover Plug (12009313) – $3.99
AT SOLENOID SEAL (11239035) – $4.29
Bearing Race (3277461) – $4.29
Automatic Shifter Bushing – O.D. 0.525 In.; I.D. 0.240 In.; Length 0.490 In. (22149556) – $5.49
ManTransShftLvrBush (12008235) – $5.99

What are the top-rated Transmission Parts that fit the 1992 Ford Ranger?

Out of 1,542 reviews by customers, our 1992 Ford Ranger Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1992 Ford Ranger and their top-rated products:

Back Up Neutral Safety Parts
- Neutral Safety Switch (3057402) – $62.05
Manual Transmission Kits
- Neutral Safety Switch (3057402) – $62.05
Automatic Transmission Pan and Gaskets
- Neutral Safety Switch (3057402) – $62.05

What types of Transmission Parts do you sell for my 1992 Ford Ranger?

As of 3/1/26, these are some of the most in-demand types of Transmission Parts for a 1992 Ford Ranger:

Can I get help with 1992 Ford Ranger Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Transmission Parts and more.

What is your return policy for Ford Ranger Transmission Parts?

Advance Auto Parts keeps returns simple. For new Ford Ranger Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1992 Ford Ranger Transmission Parts

Dorman – Help – Pedal and Shift Linkage Bushing Assortment (Part No.14041)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Schaeffler – Cup (Part No.LM67010)

Driveworks – Oil Seal (Part No.S-2655)

National – Multi Purpose Seal (Part No.712007)

National – Shaft Repair Sleeve (Part No.99181)

LuK – Master Cylinder, Clutch (Part No.CRS027)

Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.FM136HD)

Schaeffler – Shaft Seal (Part No.SS2409)

National – Multi-Purpose Seal (Part No.710535)

Carquest Premium – Neutral Safety Switch (Part No.SBA4515)

Carquest Premium – Multi-Use Connector (Part No.PTA1241)

National – Bearing Race (Part No.M88010)

Carquest Premium – Multi-Use Connector (Part No.PTA1439)

Dorman – Transmission Oil Pan: Direct Fit, Steel, 12.5 Quart (Part No.265-831)

Schaeffler – Cone (Part No.KM86649)

National – Bearing Race (Part No.LM67010)

National – Multi-Purpose Seal (Part No.3604)

ATP – AT SHIFT KIT (Part No.FK-7)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC1323)

Driveworks – Oil Seal (Part No.S-2955)

ATP – ATP Automatic Transmission Modulator Valve (Part No.FX-226)

Driveworks – Oil Seal (Part No.S-710535)

Driveworks – Taper Bearing Cup (Part No.S-LM-501314)

ATP – AT OVERHAUL KIT (Part No.FGS-37)

Imperial – Transmission Line Fitting Kit (Part No.240390)

Imperial – Transmission Line Fitting Kit (Part No.240252)

Imperial – Transmission Line Fitting Kit (Part No.240394)

ATP – AT SOLENOID SEAL (Part No.JO-15)

ATP – ATP Automatic Transmission Modulator Valve (Part No.FX-226)

USA Standard Gear – ManTransShftLvrBush (Part No.70219)

ATP – AUTO TRANS BAND (Part No.FX-252)

Schaeffler – Repair Sleeve (Part No.SR3501)

Driveworks – Oil Seal (Part No.S-2655)

National – Multi-Purpose Seal (Part No.3543)

National – Multi-Purpose Seal (Part No.7692S)

National – Multi-Purpose Seal (Part No.3604)

Driveworks – Oil Seal (Part No.S-7692S)

Driveworks – Oil Seal (Part No.S-3604)

National – Multi-Purpose Seal (Part No.2655)

ATP – AT CONTR SHAFT SEAL (Part No.FO-15)

National – Multi-Purpose Seal (Part No.7929S)

Driveworks – Auto Transmission Torque Converter Seal (Part No.S-2658-V)

Driveworks – Oil Seal (Part No.S-2955)

National – Multi-Purpose Seal (Part No.330385)

USA Standard Gear – ManTransBrg-SealKit (Part No.72911)

USA Standard Gear – ManTransBrg-SealKit (Part No.74679)

Driveworks – Main Bearing Repair Sleeve (Part No.S-99181)

Schaeffler – Shaft Seal (Part No.SS2409)

Schaeffler – Shaft Seal (Part No.SS2421)

Schaeffler – Shaft Seal (Part No.SS2277)

Motive Gear – Pinion Seal (Part No.3604)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2639)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2666)

Energy Suspension – TransMt (Part No.4.1148R)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)

Imperial – Mounting Kit System (Part No.226201)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242009)

Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242016)

Driveworks – Taper Bearing Set (Part No.S-A-2)

National – Bearing Race (Part No.M88010)

National – Bearing (Part No.M86649)

National – Tapered Roller Bearing Cone (Part No.M802048)

Driveworks – Taper Bearing Set (Part No.S-A-36)

Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-5707)

Driveworks – Taper Bearing Cone (Part No.S-M-88048)

National – Bearing Race (Part No.LM67010)

Driveworks – Taper Bearing Cup (Part No.S-LM-501314)

National – Bearings (Part No.LM29749)

Schaeffler – Bearing – CRB (Cylindrical Roller Bearing) (Part No.FC67147)

Schaeffler – Radial Insert Ball Bearing (Part No.6206-2RSR)