1992 Dodge W150 Drive Shafts and Axles

More 1992 Dodge W150 Drive Shafts and Axles

Find your specific 1992 Dodge W150 original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1992 Dodge W150 Drive Shafts and Axles

Yukon Gear – 9.25" Chrysler C/Clip (Part No.33075)

9.25" Chrysler C/Clip

from

$17.99
9.25″ Chrysler C/clip, 0.205″ wide for 4137429 axle.

Product Features:
  • c-clip for Chrysler 9.25″ rear
  • 0.205″ thick
See More
View Product

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1350 U/Joint Size (Part No.41021)

Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1350 U/Joint Size

from

$289.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 30 and 44
  • 26 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Strap style
See More
View Product

National – Bearings (Part No.B-228)

Bearings

from

$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More
View Product

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6079)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$78.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 92-05; DODGE 84-10; GMC 92-05; RAM 11-20;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1984-2020
  • Weight approx: 4 Lbs
  • BEARING ID / BORE: 1.3780 INCH / 35 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: SQUARE FRAME
See More

(1 reviews)
View Product

National – Bearings (Part No.HM88610)

Bearings

from

$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More
View Product

Yukon Gear – Outer Stub Axle Nut For Dodge Dana 44 & 60 (Part No.33492)

Outer Stub Axle Nut For Dodge Dana 44 & 60

from

$23.99
Outer stub axle nut for Dodge Dana 44 & 60. This replaces Spicer part number 46085.

Product Features:
  • Outer stub axle nut for Dodge Dana 44 and 60
See More
View Product

National – Multi Purpose Bearing (Part No.HB-88107-A)

Multi Purpose Bearing

from

$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

(25 reviews)
View Product

Yukon Gear – Drive Flange Cap For Dana 44 (Part No.32134)

Drive Flange Cap For Dana 44

from

$109.99
Product Features:
  • Drive flange cap
  • Fits Dana 44
See More
View Product

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More
View Product

National – Bearings (Part No.B-2012)

Bearings

from

$22.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More
View Product

Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)

R1559Tv Rear Axle Bearing And Seal Kit

from

$52.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.

Product Features:
  • Includes axle bearing and seal
  • Services one side
  • Torrington Brand
  • 2.530″ O.D.
  • 1.620″ I.D.
See More
View Product

Yukon Gear – R1561Tv Rear Axle Bearing And Seal Kit (Part No.10002)

R1561Tv Rear Axle Bearing And Seal Kit

from

$92.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1561TV axle bearing and seal kit, for Ford and Dodge, TorringtonBrand, 2.985″ OD, 1.700″ ID. This axle bearing & seal kit services one side only.

Product Features:
  • Fits Ford and Dodge applications
  • Includes axle bearing and seal
  • Torrington Brand
  • Services one side
  • 2.985″ O.D.
  • 1.700″ I.D.
See More
View Product

Cardone – Driveshaft / Prop Shaft (Part No.65-9710)

Driveshaft / Prop Shaft

from

$521.99
CARDONE has extensive experience in testing and engineering prop shafts – we’ve spent years analyzing materials and processes to arrive at a superior, longer-lasting product. Each unit is engineered and built to match O.E. performance. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More
View Product

Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-195)

Front Drive Shaft: Greaseable, Adjustable

from

$1017.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More
View Product

Yukon Gear – Intermediate Shaft Bushing For Disconnect Dana 30 & 44 (Part No.18060)

Intermediate Shaft Bushing For Disconnect Dana 30 & 44

from

$21.99
Product Features:
  • Intermediate shaft bushing
  • Fits Dana Spicer 30 and 44 with disconnect axles
See More
View Product

Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)

Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50

from

$182.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits Dana Spicer 25, 27, 30, 4 and 50
See More
View Product

Yukon Gear – Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35 (Part No.33015)

Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35

from

$6.99
Product Features:
  • Outer stub dust shield for Dana Spicer 30, 44 and AMC Model 35 IFS
See More
View Product

Yukon Gear – Dana 44 Outer Stub Axle Replacement (Part No.21109)

Dana 44 Outer Stub Axle Replacement

from

$416.99
Yukon 1541H replacement outer stub axle shaft for Dana 44 and ’80-’93 Dodge with a length of 9.92 inches. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy front axles come with a one year warranty against manufacturing defects.

Product Features:
  • 19 spline
  • 9.92″ long
  • Fits Dana Spicer 44 in 1980-1993 Dodge
  • Outer stub
  • 5-760X U-joint size
See More
View Product

Spicer – Universal Joint (Part No.5-160X)

Universal Joint

from

$40.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

(10 reviews)
View Product

Spicer – Universal Joint (Part No.5-153X)

Universal Joint

from

$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

(12 reviews)
View Product

Spicer – SPICER U-JOINT (Part No.5-1310-1X)

SPICER U-JOINT

from

$44.99
SPICER U-JOINT
View Product

Yukon Gear – Axle Seal For Semi-Floating Ford And Dodge With R1561Tv Bearing (Part No.30140)

Axle Seal For Semi-Floating Ford And Dodge With R1561Tv Bearing

from

$21.99
Axle seal for semi-floating Ford and Dodge with R1561TV bearing.Yukon Mighty seal.

Product Features:
  • Rear axle seal
  • Fits Ford and Dodge applications
  • 2.985″ O.D.
  • 1.700″ I.D.
See More
View Product

Yukon Gear – Outer Replacement Seal For Dana 44 And 60 Quick Disconnect Inner Axles (Part No.30103)

Outer Replacement Seal For Dana 44 And 60 Quick Disconnect Inner Axles

from

$25.99
Outer replacement seal for Dana 44 and 60 quick disconnect inner axles. 2.625″ OD.Yukon Mighty seal.

Product Features:
  • Outer axle seal
  • Fits Dana Spicer 44 and 60 with vacuum disconnect
  • 2.625″ O.D.
See More
View Product

Yukon Gear – Replacement Inner Seal For Dana 44 & Dana 60, Quick Disconnect (Part No.30312)

Replacement Inner Seal For Dana 44 & Dana 60, Quick Disconnect

from

$15.99
Replacement inner seal for Dana 44 & Dana 60, quick disconnect (2.290″ OD).Yukon Mighty seal.

Product Features:
  • Front inner axle seal
  • Fits Dodge disconnect front with Dana Spicer 44 or 60
See More
View Product

Yukon Gear – Outer Stub Axle Nut Washer For Dodge Dana 44 & 60 (Part No.33491)

Outer Stub Axle Nut Washer For Dodge Dana 44 & 60

from

$7.99
Outer stub axle nut washer for Dodge Dana 44 & 60. This replaces Spicer part number 45523.

Product Features:
  • Outer stub axle nut washer for Dodge Dana 44 and 60
See More
View Product

Popular 1992 Dodge W150 Drive Shafts and Axles Categories

Axle Shaft Universal Joints
Axle Shaft Universal Joints
Drive Shaft Center Supports
Drive Shaft Center Supports
Center Support Bearings
Center Support Bearings
Axle Shaft Bearing Assemblies
Axle Shaft Bearing Assemblies
Drive and Prop Shaft Assemblies
Drive and Prop Shaft Assemblies
Bearing Pullers
Bearing Pullers
Drive Shaft Bearings
Drive Shaft Bearings
Axle Shaft Seals
Axle Shaft Seals
Drive Shaft Slip Yoke Sleeves
Drive Shaft Slip Yoke Sleeves
Axle Shaft Bearings
Axle Shaft Bearings
Rear Axle Shaft Bearings
Rear Axle Shaft Bearings
Stub Axles
Stub Axles
Axle Nuts
Axle Nuts
Axle Support Bushings
Axle Support Bushings
Axle Shaft Seal Retainers
Axle Shaft Seal Retainers
Axle Dust Shields
Axle Dust Shields
Axle Nut Thrust Washers
Axle Nut Thrust Washers
Axle Shaft Flange Caps
Axle Shaft Flange Caps
Axle Pinion Repair Sleeves
Axle Pinion Repair Sleeves

1992 Dodge W150 Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1992 Dodge W150. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 53 different Drive Shafts and Axles in our inventory ranging from $4.49 to $1,017.99. That means you can find the exact parts or products you need to keep that 1992 Dodge W150 running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1992 Dodge W150. National, Spicer, and Anchor are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1992 Dodge W150, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 272 reviews in this category, some of the top rated parts include Ball Bearing with 3.0 stars and Bearings with 5.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1992 Dodge W150 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1992 Dodge W150 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1992 Dodge W150 demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your W150 the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Spicer Drive Shafts and Axles

We carry Spicer parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 1992 Dodge W150, our most popular Spicer Drive Shafts and Axles include:
Universal Joint
from $40.99
(10)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $51.99
(7)
Universal Joint
Axle Shaft Universal Joints

Top 1992 Dodge W150 Drive Shafts and Axles from National

National products are another trusted brand when it comes to Drive Shafts and Axles for your 1992 Dodge W150. Popular National parts include:
Multi Purpose Bearing
from $44.99
(25)
Multi Purpose Bearing
Drive Shaft Center Supports
Multi Purpose Seal
from $14.99
(20)
Multi Purpose Seal
Axle Shaft Seals
Wheel Bearing: Direct Fit, 1 Piece
from $52.99
(20)
Wheel Bearing: Direct Fit, 1 Piece
Axle Shaft Bearings

FAQs for 1992 Dodge W150 Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1992 Dodge W150?

Out of 53 Drive Shafts and Axles for the 1992 Dodge W150, the most popular in our inventory are:
Multi Purpose Seal
from $10.99
(19)
Multi Purpose Seal
Axle Shaft Seals
Center Support Bearing Motor Mount: Center, 1 Piece
from $22.79
(13)
Center Support Bearing Motor Mount: Center, 1 Piece
Center Support Bearings
Axle Repair Bearing
from $24.29
(11)
Axle Repair Bearing
Rear Axle Shaft Bearings

What are the top-rated 1992 Dodge W150 Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 1992 Dodge W150 based on customer reviews/ratings are:
Ball Bearing
from $19.99
(5)
Ball Bearing
“Easy Installation, Exact Fit”
Bearings
from $14.79
(3)
Bearings
“good product,”
Center Support Bearing Motor Mount: Center, 1 Piece
from $78.99
(1)
Center Support Bearing Motor Mount: Center, 1 Piece
“Good fit”

More Popular Parts for All Makes