1992 Chevrolet K2500 Truck Beds

The best selling soft Tri-Fold cover just got better. The Trifecta 2.0 has softer curves and sleek design that creates smoother, more contoured, low profile appearance. The tarp is constructed of heavy-duty, leather grained fabric with an integrated corner tuck system that has improved tarp tension and keeps your truck looking great. The newly redesigned frame, hinges, and corners provide more structural strength than before. Strongest in the industry, the frame is made of lightweight aircraft grade aluminum. The new MAX hinges are rugged and have a double pivot design. Our exclusive snap on seals eliminate adhesive and remain in place for ultimate weather protection.

Product Features:

• Lockable Via Tailgate Lock
• Heavy Duty Leather Grain Fabric Provides Clean Lines And A Low Profile Appearance
• Engineered Cab Clamps Attach Directly To Your Bed Flanges Without Damage And Alteration To Your Bed Caps
• EZ-Lock Clamps Requires Minimal Effort To Operate And Self-Locks In Position When Attached To The Bed Flange For Added Security
• Clamping System Attaches To Your Truck In Seconds For Easy Installation
• Rear Tail Section Clamps Operate With Spring Action Handle For Instant Fasten And Release, Clamp Conveniently Stows Away Inside Rail When Not In Use
• Easy To Use Folding Design With Smooth Sleek Looks

The new Lund Hard Fold tonneau cover is our latest addition to our top selling premium tonneau covers. The Hard Fold has been designed exclusively with an aluminum under body frame covered with the highest marine grade cover on top. Maximum security is provided through impact resistant panels that simplifies installation and operation. To open, simply unclamp the locking handles and fold the cover forward. The nylon straps hold the cover in an open position when you need to haul your cargo. This cover comes completely assembled – no drilling required. Installation time is less than 10 minutes and is backed by our limited lifetime warranty.

Product Features:

• 6063 All Aluminum Sub-Panels
• Double-Sided/Tear Resistant
• 24.5 oz. Marine Grade Vinyl Material
• Black Epoxy Coated Sub-Panel And Support Beams
• Comes Completely Assembled
• Scuff And Dent Resistant Hard Fold Design
• Simple Clamping System For Securing Your Cover
• Provides Tension And Security
• Evenly Distributed Weight Rating Of 350 lbs.
• Removes In Less Than 3 Minutes

The best selling soft Tri-Fold cover just got better. The Trifecta 2.0 has softer curves and sleek design that creates smoother, more contoured, low profile appearance. The tarp is constructed of heavy-duty, leather grained fabric with an integrated corner tuck system that has improved tarp tension and keeps your truck looking great. The newly redesigned frame, hinges, and corners provide more structural strength than before. Strongest in the industry, the frame is made of lightweight aircraft grade aluminum. The new MAX hinges are rugged and have a double pivot design. Our exclusive snap on seals eliminate adhesive and remain in place for ultimate weather protection.

Product Features:

• Lockable Via Tailgate Lock
• Heavy Duty Leather Grain Fabric Provides Clean Lines And A Low Profile Appearance
• Engineered Cab Clamps Attach Directly To Your Bed Flanges Without Damage And Alteration To Your Bed Caps
• EZ-Lock Clamps Requires Minimal Effort To Operate And Self-Locks In Position When Attached To The Bed Flange For Added Security
• Clamping System Attaches To Your Truck In Seconds For Easy Installation
• Rear Tail Section Clamps Operate With Spring Action Handle For Instant Fasten And Release, Clamp Conveniently Stows Away Inside Rail When Not In Use
• Easy To Use Folding Design With Smooth Sleek Looks

New Standard Replacement Driver Side Cab Corner, 21 X 7 X 1

Product Features:

• 21 X 7 X 1, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Cab Corner, 21 X 7 X 1

Product Features:

• 21 X 7 X 1, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Cab Corner Inner, 2 Door Extended Super Cab, 41 X 9 1/2 X 3 1/2

Product Features:

• 2 Door Extended Super Cab, 41 X 9 1/2 X 3 1/2, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

The stylish and innovative design of these steps add to a vehicle rugged off road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:

• Exclusive New Multi Mount System
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Todays Vehicles
• Strong Construction To Hold Up Under Extreme Conditions
• Mechanical Polished Finish That would not Rust, Crack Or Peel And Requires Very Little Maintenance
• Strongest And Easy Installation
• Limited Lifetime Warranty

LD step will give the user easier access to the vehicle due to the wider and deeper stepping surface which extends further than our other steps. The LD step is available in our three durable finishes, and installation is a cinch with our mounting system.

Product Features:

• Easier Entry And Exit From Your Vehicle
• Wide Functional Step Area
• Extends Further Than Our Current Steps
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy For Extreme Longevity
• New Aggressive And Appealing Tread Design For A Non-Slip Surface
• Unique Design That Enhances The Looks Of Current Vehicle Body Styles
• Resists Scratches, Peeling And Fading
• Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products

The stylish and innovative design of these steps add to a vehicle rugged off road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:

• Exclusive New Multi Mount System
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
• Strong Construction To Hold Up Under Extreme Conditions
• Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
• Strongest And Easy Installation

Product Features:

• Soft And Durable Diamond Bond Pattern
• Unique 4-Layer Breathable Material
• Ultraviolet Protection Against Sun And Heat
• Polypropylene Layers Repel Water
• Side Grommets For Tie Downs
• Includes Free Locking Cable And Storage Bag
• Indoor And Outdoor Usage

Cab Forward Truck Covers are designed as a quick and easy cover solution to protect your truck’s cab and hood. Polycotton covers provide good basic protection for your truck cab forward to the bumper. This woven Polycotton blend is sun and water resistant, while cotton gives a soft touch, protecting your paint.

Product Features:

• Custom Protection for Front Half of Pickup
• Great for Use with a Camper
• Protects Interior From UV & Reduces Heat Build-up
• Easy to Use
• Cab Forward Covers Available in Multiple Fabrics

Cab Forward Truck Covers are designed as a quick and easy cover solution to protect your truck’s cab and hood. Sunbrella provides protection and years of service in intense sun climates like Arizona and other areas of the Sunbelt, where UV rays can rapidly degrade the paint and interior. Because of the use of acrylic fibers, which are naturally UV resistant, Sunbrella has long been the recognized leader in longwearing marine fabrics for bimini tops, sail covers and deck enclosures. Besides marine uses, Sunbrella is also used for commercial awnings due to its ability to provide UV blockage, along with a rich, woven finish. The acrylic fibers are solution dyed, before the fabric is woven, to assure the color goes all the way through the fabric. Using a special finish process, the material is then softened for use as a truck cab cover fabric. The fabric is exceptionally strong and, coupled with its UV resistance, it also makes an excellent cover for RV’s and trailers that spend extended time stored outside.

Product Features:

• Custom Protection for Front Half of Pickup
• Great for Use with a Camper
• Protects Interior From UV & Reduces Heat Build-up
• Easy to Use
• Cab Forward Covers Available in Multiple Fabrics

New Standard Replacement Passenger Side Outer Extension Cab Corner, 27 1/2 X 17 1/2

Product Features:

• 27 1/2 X 17 1/2, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Outer Extension Cab Corner, 27 1/2 X 17 1/2

Product Features:

• 27 1/2 X 17 1/2, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Or Passenger Side Cab Corner Extension

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

DogBx

Westin Bed Caps, constructed with high-impact ABS, give your vehicle a finished factory look while protecting your bed railing from the elements. Product installs quickly and easily with sturdy 3M tape. Available with or without stake pocket in black finish.

Product Features:

• Protects bed railing against damage
• Gives vehicle a finished factory look
• Installs quickly and easily with 3M tape
• Matching Tail Cap / Front Cap available
• Will work with tonneau covers, camper shells and tie-downs if properly installed
• Available in Smooth or Ribbed style
• Available with or without stake pocket holes
• Made in the USA

When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyones needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.

Product Features:

• Round Tube Louvered Design With Space For The Cabs Sliding Rear Window
• Exclusive Design
• Limited 3 Year Warranty

HDX Commercial Grade Headache Rack protects your rear window from potential damage from shifting cargo. Welded tie-off hooks for securing your load are standard on all applications. Angled louvers keep sunlight out the cab cool and prevent UV damage to your interior all while allowing unobstructed visibility. 4 mount tabs give you the option of adding safety lights or accessories. Accommodates all major brand tool boxes. 2 diameter round top tube makes it easy to slide ladders

Product Features:

• Provides The Protection Heavy Trucks Require
• 1 Piece Welded Construction
• Full Louvered Window Protection
• Includes Rope Tie Off Hooks
• Has Opening For Rear Light
• Contoured Body Frame
• Mounts For Light Tabs

Even if you secure your cargo properly, it can still happen. Driving on todays hectic roads can lead to extreme stopping situations that could end up sending cargo barreling through your truck cab rear window. With the Dee Zee Cab Rack this is no longer a concern. Made of 100 Percent 2.5 Inch aluminum tubing with a protective textured black powder coating, our cab racks are built to handle as much abuse as you can throw at them. A rear window protection screen consists of either heavy duty ultra-mesh – for your protection and visibility requirements.

Product Features:

• Rugged Protection For Your Trucks Rear Cab Area
• 2.5 Inch Hexagonal Aluminum Tubing For Rugged Construction
• Heavy-Duty Aluminum Ultra Mesh Offers More Visibility And Protection Depending On Your Needs
• Protective Textured Black Powder Coat Finish Keeps Your Rack Looking Fresh
• Integrated Channel System For Easy Addition Of Accessories
• Install Into Existing Stake Pocket Holes

When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.

Product Features:

• Round Tube Louvered Design With Space For The Cab Sliding Rear Window
• Exclusive Design
• Protects The Cab From Cargo That May Shift In The Truck Bed
• Protective Bars Also Function As Convenient Tie Down Point To Brace Or Secure Heavy Cargo

For the heavy-duty hauler and hardworking trailer blazer, a headache rack is a must-have truck accessory. It does not take much for a two-by-four, steel pipe or other loose cargo to put a good size crack in the rear window of your truck cab, especially when you stick to the off-road trail more than the paved road. The ARIES classic headache rack offers a hardy design and sturdy structure to make sure your truck is ready to work. Made from 1″ x 2″ carbon steel tubing, ARIES classic headache racks provide excellent protection for your truck cab, from both the heat of the sun and potential impact from unsecure cargo in your truck bed. The full louvers help keep your cab cooler throughout the day, and their heavy-duty construction helps block any damage from behind. The ARIES classic headache rack also features a dual-layer E-coat and semi-gloss black powder coat finish to maintain its sleek appearance, preventing damage from rust, scratches and UV rays. Installation is quick and easy with the ARIES headache rack. It is compatible with cross-bed truck tool boxes and includes all necessary hardware for a complete installation. When your pickup truck is more than just a show horse, ARIES has you covered. We understand that it’s about more than goofing off in the mud. When you have a job to finish and a workhorse to drive, an ARIES classic headache rack is a reliable tool in your belt.

Product Features:

• Heavy-duty 1″ x 2″ steel tube construction for a solid frame
• Dual-layer E-coat and black powder coat finish for maximum corrosion resistance
• Fully louvered center section to protect the cab and passengers
• Louvers also help keep the cab cooler by blocking direct sunlight
• Flat steel brackets bolt onto the truck bed walls (drilling may be required)
• Compatible with most crossover truck tool boxes

When a truck bed crossmember rusts, the only option has been to replace the entire bed. This kit allows replacement of only the failed floor supports to reduce repair costs.

Product Features:

• Saves money – this truck bed floor support repair kit allows you to replace only damaged crossmembers, not the entire bed
• Complete repair – includes 4 bed crossmembers painted in weldable primer and mounting hardware
• Application specific – made to match the dimensions and material for certain Chevrolet and GMC pick-up trucks
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

New Standard Replacement Bed Floor Support

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle