1992 BMW 318i Car Parts & Accessories

Castrol EDGE High Mileage 5W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Reduces leaks, oil burnoff and power robbing deposits
• 15,000 miles between oil changes (1)
• (1) Or one year, whichever comes first
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Porsche A40
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C961-A1

Castrol GTX High Mileage 5W-30 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.

Product Features:

• Phosphorus Replacement Technology helps extend emission system life
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (1)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (2)
• (1) Based on API and ACEA volatility specifications
• MB-Approval 229.5
• (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets Ford WSS-M2C946-B1
• Meets Ford WSS-M2C961-A1

Valvoline High Performance Gear Oil is an extreme pressure gear lubricant formulated with quality base oils and superior additives that helps protect against severe temperatures, shock loads, scuffing, scouring, corrosion and pitting in high speed, high load, high torque and high horsepower conditions.

Product Features:

• Formulated for reliable gear protection
• Protects against severe temperatures to help extend service life
• Formulated with extreme-pressure additives to minimize gear wear from shock loads
• Helps protect against gear wear from scuffing, scouring, corrosion and pitting
• Recommended for conventional hypoid differentials and non-synchronized manual transmissions in passenger cars, light trucks, sport utility vehicles, vans and heavy-duty trucks where an API-GL5 or GL-4 fluid is specified
• PLEASE NOTE: Valvoline recommends SynPower Full Synthetic Gear Oil for limited slip differentials

Castrol GTX High Mileage 5W-20 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (1)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy(2)
• (1) Based on API and ACEA volatility specifications
• VW 504 00 / 507 00
• (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets Ford WSS-M2C945-B1
• Meets Ford WSS-M2C960-A1

Castrol EDGE 5W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:

• 3X Stronger than the leading full synthetic (1)
• 10X Better high stress performance (2)
• 20,000 miles between oil changes (3)
• (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
• (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
• (3) Or one year, whichever comes first
• Approved and Licensed Specifications:
• ILSAC GF-6
• Exceeds API SP/SN PLUS/SN/SM
• GM dexos1 Gen 3
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C946-B1
• Meets Ford WSS-M2C961-A1

Castrol EDGE 5W-20 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:

• 3X Stronger than the leading full synthetic (1)
• 10X Better high stress performance (2)
• 20,000 miles between oil changes (3)
• (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
• (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
• (3) Or one year, whichever comes first
• Approved and Licensed Specifications:
• MB-Approval 229.5
• Exceeds API SP/SN PLUS/SN/SM
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C945-B1
• Meets Ford WSS-M2C960-A1

Castrol GTX High Mileage 10W-30 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.

Product Features:

• Phosphorus Replacement Technology helps extend emission system life
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (1)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (2)
• (1) Based on API and ACEA volatility specifications
• ILSAC GF-6
• (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
• API SP/SN PLUS/SN/SM
• ILSAC GF-6

Castrol EDGE 5W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:

• 3X Stronger than the leading full synthetic (1)
• 10X Better high stress performance (2)
• 20,000 miles between oil changes (3)
• (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
• (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
• (3) Or one year, whichever comes first
• Approved and Licensed Specifications:
• ACEA A5/B5, C2
• Exceeds API SP/SN PLUS/SN/SM
• GM dexos1 Gen 3
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C946-B1
• Meets Ford WSS-M2C961-A1

Castrol EDGE High Mileage 5W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Reduces leaks, oil burnoff and power robbing deposits
• 15,000 miles between oil changes (1)
• (1) Or one year, whichever comes first
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets Ford WSS-M2C960-A1
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C946-B1
• Meets Ford WSS-M2C961-A1

Castrol GTX 5W-30 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge.

Product Features:

• Premium-quality base oils and anti-wear additives that help extend engine life
• Superior protection against engine sludge
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• ILSAC GF-6
• Meets Ford WSS-M2C946-B1

Castrol EDGE 5W-20 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:

• 3X Stronger than the leading full synthetic (1)
• 10X Better high stress performance (2)
• 20,000 miles between oil changes (3)
• (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
• (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
• (3) Or one year, whichever comes first
• Approved and Licensed Specifications:
• ILSAC GF-6
• Exceeds API SP/SN PLUS/SN/SM
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C945-B1
• Meets Ford WSS-M2C960-A1

Castrol GTX High Mileage 5W-30 is the #1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.

Product Features:

• Phosphorus Replacement Technology helps extend emission system life
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (1)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (2)
• (1)Based on API and ACEA volatility specifications
• Approved for BMW M-Models
• (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets Ford WSS-M2C946-B1
• Meets Ford WSS-M2C961-A1

Castrol GTX High Mileage 5W-20 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.

Product Features:

• Phosphorus Replacement Technology helps extend emission system life
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (1)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (2)
• (2) Based on API and ACEA volatility specifications
• CVT Applications: All of Honda CVTs except 2001-2007 Model Honda Fit/Jazz , Hyundai/Kia SP-III, Mazda CVTF 3320, Mitsubishi DIAQUEEN ATF SP-III, CVT Fluid J1, CVT Fluid J4, CVT Fluid J4+, Ford CVT23, Mini Cooper EZL799, Mercedes-Benz 236.20
• (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets Ford WSS-M2C945-B1
• Meets Ford WSS-M2C960-A1

Castrol GTX 10W-30 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.

Product Features:

• Advanced protection against viscosity and thermal breakdown
• Superior protection against engine sludge
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets Ford WSS-M2C961-A1

Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to sludge, varnish and carbon build-up in your engine: three factors that reduce engine life, power and fuel economy. Castrol Ultraclean is a synthetic blend engine oil available in 0W-20, 5W-20 and 5W-30 grades. Its double-action formula has been proven to clean away the sludge that can block engine oilways and helps prevent new sludge formation thanks to its synthetic technology. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard. If keeping your engine clean is important to you, it’s good to know that no other oil keeps engines cleaner.

Product Features:

• 1.4X superior sludge protection compared to tough industry standards (As measured in the Sequence VH Sludge test vs. API SP test limits)
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Premium-quality base oils and anti-wear additives that help extend the life of your engine
• Double-Action Formula: The synthetic blend engine oil features a double-action formula that effectively cleans away existing sludge and prevents new sludge formation.
• Versatile Grades: Available in 0W-20, 5W-20, and 5W-30 grades, Castrol Ultraclean caters to various engine requirements and driving conditions.
• Enhanced Engine Performance: By reducing sludge, varnish, and carbon build-up, this oil helps improve engine life, power, and fuel economy.
• Synthetic Blend Composition: The GTX Ultraclean 5W-20 Synthetic Blend Motor Oil combines the benefits of synthetic technology with the reliability of a standard oil class.

Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:

• EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
• REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
• FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
• MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
• MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360

CASTROL EDGE Euro Car 5W-30 C3 Full Synthetic Motor Oil is a high-performance engine oil that is designed to provide superior protection to the latest technology, high output engines that operate at extreme temperatures. This full-synthetic motor oil is formulated to transform under pressure, increasing film strength to prevent oil breakdown and reduce friction to unlock maximum performance. It is optimized to deliver 40% better performance than other motor oils and is recommended by world-leading auto manufacturers. This motor oil provides engine protection for the entire drain interval and meets API CF/SN, ACEA A3/B4, ACEA C3, GM dexos2 specifications. It is suitable for European OEM diesel specifications for Mercedes-Benz and VW/Audi. This motor oil was formerly known as Castrol SLX and is available in a 1 quart container.

Product Features:

• Optimized to deliver 40% better performance than required by acea standards.
• Recommended by world leading auto manufacturers
• Engine protection for the entire drain interval even under extreme pressure of high output engines
• Meets api cf/sn, acea a3/b4, acea c3, gm dexos2, mb approval 229.31/229.51, vw 505 00/505 01, renault rn 0700/0710
• Formerly known as castrol slx
• Syntec Power Technology: The reformulated EDGE Engine Oil now features Syntec Power Technology, which enhances its performance even further.

Castrol GTX 5W-20 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge

Product Features:

• Premium-quality base oils and anti-wear additives that help extend engine life
• Superior protection against engine sludge
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets or exceeds the following specifications:
• Meets Ford WSS-M2C945-B1
• Meets Ford WSS-M2C960-A1

Castrol GTX 10W-30 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.

Product Features:

• Advanced protection against viscosity and thermal breakdown
• Superior protection against engine sludge
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets Ford WSS-M2C960-A1

Castrol GTX High Mileage 10W-30 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (1)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (2)
• (1) Based on API and ACEA volatility specifications
• Meets or exceeds the following specifications:
• (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SM
• ILSAC GF-6

Castrol EDGE 10W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:

• 3X Stronger than the leading full synthetic (1)
• 10X Better high stress performance (2)
• 20,000 miles between oil changes (3)
• (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
• (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
• (3) Or one year, whichever comes first
• Approved and Licensed Specifications:
• Exceeds API SP/SN PLUS/SN/SM

Castrol GTX 5W-20 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge

Product Features:

• Premium-quality base oils and anti-wear additives that help extend engine life
• Superior protection against engine sludge
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• ILSAC GF-6
• Meets Ford WSS-M2C945-B1

Castrol EDGE 10W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:

• 3X Stronger than the leading full synthetic (1)
• 10X Better high stress performance (2)
• 20,000 miles between oil changes (3)
• (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
• (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
• (3) Or one year, whichever comes first
• Approved and Licensed Specifications:
• Exceeds API SP/SN PLUS/SN/SM
• ILSAC GF-6

Pentosin HP 5W-30 Synthetic Motor Oil is a high-performance engine oil that is fully synthetic and designed for modern vehicles with extended oil service intervals. It is suitable for use in both gasoline and diesel engines, including those with turbochargers, as well as non-turbocharged vehicles that require 5W-30 oil. This all-season motor oil offers excellent protection against motor oil sludge and fuel deposits, and it contains special friction modifiers that help to reduce engine wear. Pentosin HP 5W-30 Synthetic Motor Oil is formulated for long service life intervals, making it an ideal choice for drivers who want to keep their engines running smoothly and efficiently. It meets service class API SL,CL.

Product Features:

• An all- season engine oil offering great protection against harsh start-up conditions and extreme temperature changes.
• Formulated for long service life intervals.
• Reduces engine oil sludge and fuel deposits.
• Contains special friction modifiers which help the engine run smoothly and improve fuel economy.
• Fully Synthetic Formula: Pento High Performance Engine Oil is made with a full synthetic formula, providing superior protection and performance for your engine.
• Meets API SL/CL Specs: This engine oil meets the latest API SL/CL specifications, ensuring that it meets the highest standards for engine protection and performance.

Castrol GTX 10W-40 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.

Product Features:

• Advanced protection against viscosity and thermal breakdown
• Superior protection against engine sludge
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption
• (1) When tested in engines with a high level of sludge
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM

Castrol EDGE High Mileage 10W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Reduces leaks, oil burnoff and power robbing deposits
• 15,000 miles between oil changes (1)
• (1) Or one year, whichever comes first
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6

Castrol EDGE High Mileage 10W-40 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Reduces leaks, oil burnoff and power robbing deposits
• 15,000 miles between oil changes (1)
• (1) Or one year, whichever comes first
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM

Castrol GTX 10W-40 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.

Product Features:

• Advanced protection against viscosity and thermal breakdown
• Superior protection against engine sludge
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption
• (1) When tested in engines with a high level of sludge
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM

Quaker State 10W-40 conventional motor oil helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving. It maintains the required viscosity from start to finish, providing optimal protection. Quaker State Motor Oil combats engine sludge and deposits, providing rust protection from harmful acids generated by engine contaminants. It reduces engine wear, providing durable wear protection. Quaker State 10W-40 Motor Oil exceeds the requirements of the following industry specifications: API SN and all previous categories. For a full list of equipment approvals and recommendations, please consult your local Quaker State Technical Help Desk and always consult your owner’s manual.

Product Features:

• Conventional 10W-40 that provides durable wear protection and reduces engine wear
• Provides corrosion protection against harmful acids generated by engine contaminants
• Maintains viscosity from start to finish, providing optimal oil film protection
• Helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving
• Combats engine sludge and deposits
• Formulated to exceed the requirements of industry specification API SN and all previous categories
• Formerly known as Quaker State Advanced Durability 10W-40 motor oil

Quaker State 10W-40 conventional motor oil helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving. It maintains the required viscosity from start to finish, providing optimal protection. Quaker State Motor Oil combats engine sludge and deposits, providing rust protection from harmful acids generated by engine contaminants. It reduces engine wear, providing durable wear protection. Quaker State 10W-40 Motor Oil exceeds the requirements of the following industry specifications: API SN and all previous categories. For a full list of equipment approvals and recommendations, please consult your local Quaker State Technical Help Desk and always consult your owners manual.

Product Features:

• Conventional 10W-40 that provides durable wear protection and reduces engine wear
• Provides corrosion protection against harmful acids generated by engine contaminants
• Maintains viscosity from start to finish, providing optimal oil film protection
• Helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving
• Combats engine sludge and deposits
• Formulated to exceed the requirements of industry specification API SN and all previous categories
• Formerly known as Quaker State Advanced Durability 10W-40 motor oil
• Rust Protection: Provides rust protection from harmful acids generated by engine contaminants, extending the life of your engine.

Mobil 1 advanced full synthetic motor oil 5W-30 helps to extend engine life for vehicles of all ages. Mobil 1 advanced synthetic motor oil is designed to deliver outstanding engine protection from the five factors that can damage engines over time and protect critical engine parts for up to 10,000 miles between oil changes. Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. This technologically advanced motor oil formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -30 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 advanced full synthetic motor oil meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy. Available in 1-qt. and 5-qt. bottles, Mobil 1 advanced full synthetic motor oil 5W-30 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern vehicles, including high-performance turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s leading synthetic motor oil brand at retail, recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. (Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ 52 weeks ending January 2, 2021)

Product Features:

• Mobil 1 advanced full synthetic motor oil 5W-30 helps to protect your engine from the five factors that can damage engines over time
• Helps to protect critical engine parts for up to 10,000 miles between oil changes, controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Helps extend engine life by working to prevent damaging deposits and sludge buildup
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)

Castrol EDGE High Mileage 10W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Reduces leaks, oil burnoff and power robbing deposits
• 15,000 miles between oil changes (1)
• (1) Or one year, whichever comes first
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6

Give your higher mileage engine the care it deserves with Mobil 1 High Mileage full-synthetic motor oil 10W-40. This formula utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to vehicles with over 75,000 miles. Mobil 1 High Mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup, keeping critical engine parts clean and protected for up to 10,000 miles between oil changes. (1) Mobil 1 helps to keep your engine running at lower temperatures (2) and is proven to cool engine temperatures by over 10%. (3) Mobil 1 High Mileage full-synthetic motor oil 10W-40 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern cars, SUVs, light vans, and light trucks, including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines. Mobil 1 is America’s #1 selling synthetic motor oil brand at retail, (4) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ( (1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Compared to conventional oil. (3) Based on proprietary engine testing¿results may vary. (4) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending Feb 25, 2023)

Product Features:

• Mobil 1 high mileage full-synthetic engine oil 10w-40 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes. (1)
• Utilizes Mobil 1’s signature triple action formula to deliver outstanding engine performance, protection, and cleanliness
• Meets ilsac gf-6 standards to help provide low-speed pre-ignition (lspi) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Provides excellent internal engine heat protection (up to 500 degrees f) and low temperature protection (to -30 degrees f)
• Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
• Manufacturer part number: 103536

Pentosin HP 5W-30 Synthetic Motor Oil is a high-performance engine oil that is fully synthetic and designed for modern vehicles with extended oil service intervals. It is suitable for use in both gasoline and diesel engines, including those with turbochargers, as well as non-turbocharged vehicles that require 5W-30 oil. This all-season motor oil offers excellent protection against motor oil sludge and fuel deposits, and it contains special friction modifiers that help to reduce engine wear and tear. Pentosin HP 5W-30 is formulated for long service life intervals, making it an ideal choice for drivers who want to keep their engines running smoothly and efficiently. It meets service class API SL/CL and is a standard full synthetic oil.

Product Features:

• An all- season engine oil offering great protection against harsh start-up conditions and extreme temperature changes.
• Formulated for long service life intervals.
• Reduces engine oil sludge and fuel deposits.
• Contains special friction modifiers which help the engine run smoothly and improve fuel economy.
• Fully Synthetic Composition: PENTO HP 5W-30 1L is a fully synthetic engine oil, providing superior protection and performance for your vehicle’s engine.
• High Performance Formula: This engine oil is specifically designed for high performance vehicles with extended oil service intervals, ensuring optimal engine performance and longevity.

FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Excellent sludge and varnish protection
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
• Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
• Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
• Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
• Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.

FRAM Engine Oil Full Synthetic SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Excellent sludge and varnish protection
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-20 meets stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
• Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, thereby reducing the risk of pre-mature engine failure.
• Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, making it a versatile choice for various engine types.

Castrol EDGE High Mileage 5W-20 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Reduces leaks, oil burnoff and power robbing deposits
• 15,000 miles between oil changes (1)
• (1) Or one year, whichever comes first
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Porsche A40
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C960-A1

FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.

FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.

FRAM Conventional High Mileage 5W20 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W20 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W20 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Sludge Cleanup and Engine Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
• Versatile Compatibility: Protects domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
• Meets Stringent Standards: Meets or exceeds all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF, and ILSAC GF-6A Resource Conserving Service Category.

FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Excellent sludge and varnish protection
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
• Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
• Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
• Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
• Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.

FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Reliable engine protection: FRAM Conventional Oil 5W30 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

FRAM Full Synthetic High Mileage SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Protection for High Mileage Engines: Designed for engines with over 75,000 miles, this oil provides the ultimate protection, making it ideal for higher mileage vehicles.
• Advanced LSPI Prevention Technology: Contains additive technology to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines, helping to prevent premature engine fai

FRAM Engine Oil SAE 5W-20 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Reliable engine protection: FRAM Conventional Oil 5W20 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Suitable for modern engines: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs.

FRAM Engine Oil Full Synthetic SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) & turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.

Product Features:

• Faster oil flow at start-up!
• Fuel efficiency gains over heavier grade oils
• Excellent sludge and varnish protection
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-20 meets stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
• Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, thereby reducing the risk of pre-mature engine failure.
• Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, making it a versatile choice for various engine types.

FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Sludge Cleanup and Engine Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
• Versatile Compatibility: Protects domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
• Meets Stringent Standards: Formulated to meet or exceed all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF, and ILSAC GF-6A Resource Conserving Service Category.

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Easy and fast replacement
• Prevents noise and premature wear
• Provides longer brake life and performance

Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Matches OE vane size for proper cooling
• Optimal metallurgy and casting thickness to prevent warping
• Air gap eliminates brake fade and increases pad life
• Non-Directional finish decreases break-in time

The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:

• Triggers a warning light on the dashboard
• Should be replaced each time the brake pad is replaced
• Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable

The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:

• Triggers a warning light on the dashboard
• Should be replaced each time the brake pad is replaced
• Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Easy and fast replacement
• Helps deliver a quieter, more efficient braking system
• Corrosion resistant coating for long-lasting durability against harsh roads
• Manufactured with quality materials to suppress high stress levels

This disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles.
• Ideal solution – this kit provides is a reliable replacement for original hardware that has stripped
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Matches OE vane size for proper cooling
• Optimal metallurgy and casting thickness to preventing warping
• Air gap eliminates brake fade and increases pad life
• Non-directional finish decreases break-in time.

Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.

Product Features:

• Application-specific friction formulations provide shorter stopping distances and extended pad life
• Hardware included for most applications
• OE-designed slots and chamfers to reduce noise and vibration
• Multi-layer shim provides near silent braking
• Powder-coated backing plate prevents corrosion

Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.

Product Features:

• Application-specific friction formulations provide shorter stopping distances and extended pad life
• Hardware included for most applications
• OE-designed slots and chamfers to reduce noise and vibration
• Multi-layer shim provides near silent braking
• Powder-coated backing plate prevents corrosion

Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.

Product Features:

• Application-specific friction formulations provide shorter stopping distances and extended pad life
• Hardware included for most applications
• OE-designed slots and chamfers to reduce noise and vibration
• Multi-layer shim provides near silent braking
• Powder-coated backing plate prevents corrosion

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

• Dependable stopping power
• Singler layer shim for quiet braking
• OE-designed slots and chamfers to reduce noise and vibration
• Powder-coated backing plate prevents corrosion

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

• Dependable stopping power
• Singler layer shim for quiet braking
• OE-designed slots and chamfers to reduce noise and vibration
• Powder-coated backing plate prevents corrosion

Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:

• Meets or exceeds original equipment specifications for performance and durability
• OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
• Application-specific caliper bodies for easy installation
• Brackets included where required, for complete system restoration
• Meets or exceeds original equipment specifications for performance and durability
• OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
• Application-specific caliper bodies for easy installation
• Brackets included where required, for complete system restoration
• OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
• 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
• New bleeder screws, banjo bolts, and crush washers included for a complete repair
• OE Style, stainless steel pad abutment hardware included
• 100% end-of-line inspection and pressure testing ensures quality and performance
• Caliper finish or coating may vary

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

• Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
• Tensile minimum load holds up to 1800 N
• All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
• Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
• Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
• Brand may vary by location

Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:

• Meets or exceeds original equipment specifications for performance and durability
• OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
• Application-specific caliper bodies for easy installation
• Brackets included where required, for complete system restoration
• Meets or exceeds original equipment specifications for performance and durability
• OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
• Application-specific caliper bodies for easy installation
• Brackets included where required, for complete system restoration
• OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
• 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
• New bleeder screws, banjo bolts, and crush washers included for a complete repair
• OE Style, stainless steel pad abutment hardware included
• 100% end-of-line inspection and pressure testing ensures quality and performance
• Caliper finish or coating may vary

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

• Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
• Tensile minimum load holds up to 1800 N
• All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
• Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
• Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
• Brand may vary by location

Carquest Professional Platinum Euro brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. We include the wear sensors for most European applications that require replacement. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.

Product Features:

• Industry-leading number of application specific formulations for maximum performance and extended pad life
• On-vehicle testing similar to original equipment tests
• Patented 4-Layer HEX Shim Technology provides quiet braking
• HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
• Burnishing compound allows for a faster break-in of pads and rotors
• PTFE coated hardware and caliper pin grease included for nearly every application
• Wear sensors included on most European applications that require replacement
• Powder-coated backing plate prevents corrosion

Exhaust Nut

The Brembo brand has a range of over 1,600 items, which covers a remarkable 98% of all passenger cars and commercial vehicles on the roads in Europe today. Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments. Brembo UV Coating Technology : Environmentally friendly, solvent free UV coating offers superior protection of the disc, including braking plate surfaces. Includes new intelligent marking location for immediate control of the minimum thickness. High Carbon Discs: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brands foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs. PVT pillar venting technology: ( Vented Rotors Only ) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%. Fixing screw kits: discs are supplied with all the necessary fixing hardware for simpler, more efficient and safer installation

Product Features:

• Metallic finish that maintains a clean and bright appearance over the entire life span of the disc
• Protective coating on braking plate surfaces, external diameter and disc hub to ensure complete protection
• New location for minimum thickness control with greater ease of reading for service professionals
• Water-based paint free of chemical solvents – Energy efficient UV coating process
• Superior to products currently on the market proven by resistance to: Salt spray testing, Humidity and High temperatures BREMBO UV COATED DISCS BROCHURE

WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:

• High metallurgical and machining standard to improve stopping distances
• Produced to match OE design fitment – G 3000 gray iron
• Mill balanced
• TS16949 certified
• Non-directional finish provides smooth vibration free performance
• No need for machining prior to installation
• Durable Metallurgic-Gray finish to all outward non-friction surfaces
• Metallurgic-Gray anti-rust protection to help maintain a clean appearance
• Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
• Designed to minimize brake fade and extend pad and rotor life
• 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins

WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:

• High metallurgical and machining standard to improve stopping distances
• Produced to match OE design fitment – G 3000 gray iron
• Mill balanced
• TS16949 certified
• Non-directional finish provides smooth vibration free performance
• No need for machining prior to installation
• Durable Metallurgic-Gray finish to all outward non-friction surfaces
• Metallurgic-Gray anti-rust protection to help maintain a clean appearance
• Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
• Designed to minimize brake fade and extend pad and rotor life
• 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

• Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
• Tensile minimum load holds up to 1800 N
• All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
• Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
• Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
• Brand may vary by location

Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Exact fitment and original replacement
• New Brake Hardware prevents premature wear and maximizes performance
• Helps deliver a quieter, more efficient braking system
• Manufactured with quality materials to suppress high stress levels

Carquest Professional Platinum Euro brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. We include the wear sensors for most European applications that require replacement. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.

Product Features:

• Industry-leading number of application specific formulations for maximum performance and extended pad life
• On-vehicle testing similar to original equipment tests
• Patented 4-Layer HEX Shim Technology provides quiet braking
• HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
• Burnishing compound allows for a faster break-in of pads and rotors
• PTFE coated hardware and caliper pin grease included for nearly every application
• Wear sensors included on most European applications that require replacement
• Powder-coated backing plate prevents corrosion

Caliper Guide Pin

Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

• Coat-Z protective anti-corrosion coating
• No formation of rust at the hub and herewith improved visual appearance
• Immediate functional capability without removal of the coating before mounting
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• Hot spots prevented by optimized design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:

• This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
• PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
• Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Multi-Layer rubberized shims provide virtually noise-free braking
• Drilled & Slotted performance rotors provide maximum cooling
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Bolt-on upgrade for stock brakes, no modifications necessary
• Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
• Rotors are zinc plated for maximum protection against rust.
• Includes 1 Front & 1 Rear Sensor Wire
• Buy with confidence from the originator & industry leader of brake kits

Brake Line Junction

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:

• This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
• PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
• Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Multi-Layer rubberized shims provide virtually noise-free braking
• Drilled & Slotted performance rotors provide maximum cooling
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Bolt-on upgrade for stock brakes, no modifications necessary
• Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
• Rotors are zinc plated for maximum protection against rust.
• Includes 1 Front & 1 Rear Sensor Wire
• Buy with confidence from the originator & industry leader of brake kits

Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

• Coat-Z protective anti-corrosion coating
• No formation of rust at the hub and herewith improved visual appearance
• Immediate functional capability without removal of the coating before mounting
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• Hot spots prevented by optimized design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

• Coat-Z protective anti-corrosion coating
• No formation of rust at the hub and herewith improved visual appearance
• Immediate functional capability without removal of the coating before mounting
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• Hot spots prevented by optimized design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

Dual Technology Ceramic (DTC) – Low Noise – Low Dust WBR ceramic brake pads are specially formulated for driving conditions that require superior friction effectiveness without compromising low noise or low dust characteristics. The advanced ceramic formulation mitigates wheel dust, brake fade, low speed and high heat squeal, at the same time providing positive pedal feel and long-life. Every WBR ceramic brake pad comes with a platform specific shim and has a burnished contact surface (scorched) just like OEM pads to ensure easy break-in and proper long-term functionality. Advanced Material Platform Specific Brake Pad Shims: To effectively combat brake squeal, WBR utilizes different advanced materials in the shim construction, as well as fastening the shim to the pad with both mechanical tabs and silicone adhesives. This platform specific advanced material shim design is included with every WBR brake pad.

Product Features:

• Original Equipment Performance
• Solid Pedal Feel With Smooth Braking Performance
• Ultra-Quiet Ceramic Formulation
• Low Dust – Long Life
• Advanced Material Platform Specific Shims
• Scorched for Easy Break In
• Positive Mold Construction
• All WBR Pads are 100% Shimmed

Bosch QuietCast Premium raises aftermarket brake pad technology to a whole new level. Employing the industry’s best pre-attached, rubber core shims and Molded Shim Technology (on selected applications), QuietCast delivers the quiet operation you and your customers expect with the durability and long life that are the hallmarks of all Bosch products. Every Bosch QuietCast Disc Brake Pad is fitted with the industry’s best pre-attached rubber core shim. This shim style is the most predominant type used by OE manufacturers and is exclusively offered by Bosch for the independent aftermarket.

Product Features:

• OE-Equivalent and Direct Fit application.
• OE style rubber-core shims
• Advanced, platform-specific Semi Metallic formulation
• Dedicated engineers source and rigorously test all friction materials and formulations
• Manufactured under the same exacting quality standards as OE components and system
• Powder-coated backing plate
• Rigorous physical and dynamometer testing
• Synthetic lubricant in box
• Pads individually wrapped Bosch Molded Shim Technology (MST)*** (On Select Applications)
• At the time of pressing, heat, adhesive and pressure mold the multi-layer shim to the backing plate and friction material creating an integrally molded unit.
• Shim stays attached throughout the life of the pad; won’t walk or slide on the backing plate
• Provides maximum stability resulting in quieter shim performance over the life of the pad

The PBR Deluxe brake pads are manufactured with a mild ceramic compound that provides outstanding stopping power with very low fade. These pads are formulated from the latest premium quality materials and are known for their extremely low dust and long life. The PBR Deluxe pads provide extremely quiet braking, proven long pad and rotor life, reduced disc scoring, consistent smooth braking performance and are considered a great alternative to the factory brake pads. Driving Styles: Standard city and freeway braking – Frequent stop and go conditions.

Product Features:

• OE-Equivalent and Direct Fit application.
• Superior friction qualities.
• Ceramic materials
• Shimmed where recommended by engineering
• Application specific formulations
• Provides exceptionally long pad and rotor life, and resistance to heat
• Low noise, minimal brake dust

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit with Powder Coated Calipers comes with everything you need, from pads, rotors, calipers and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. The Powder Coated Calipers not only protect against corrosion, but also really stand out behind your wheels! Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit with Calipers.

Product Features:

• This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
• PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
• All calipers are powder coated, assembled, and tested in our Chicago, IL facility
• Low dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Multi-Layer rubberized shims provide virtually noise-free braking
• Drilled & Slotted performance rotors provide maximum cooling
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Bolt-on upgrade for stock brakes, no modifications necessary
• Rotors are zinc plated for maximum protection against rust.
• Includes 1 Front Sensor Wire
• Buy with confidence from the originator & industry leader of brake kits

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:

• This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
• PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
• Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Multi-Layer rubberized shims provide virtually noise-free braking
• Drilled & Slotted performance rotors provide maximum cooling
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Bolt-on upgrade for stock brakes, no modifications necessary
• Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
• Rotors are zinc plated for maximum protection against rust.
• Includes 1 Front Sensor Wire
• Buy with confidence from the originator & industry leader of brake kits

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:

• This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
• PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
• Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Multi-Layer rubberized shims provide virtually noise-free braking
• Drilled & Slotted performance rotors provide maximum cooling
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Bolt-on upgrade for stock brakes, no modifications necessary
• Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
• Rotors are zinc plated for maximum protection against rust.
• Includes 1 Front Sensor Wire
• Buy with confidence from the originator & industry leader of brake kits

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:

• This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
• PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
• Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Multi-Layer rubberized shims provide virtually noise-free braking
• Drilled & Slotted performance rotors provide maximum cooling
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Bolt-on upgrade for stock brakes, no modifications necessary
• Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
• Rotors are zinc plated for maximum protection against rust.
• Includes 1 Rear Sensor Wire
• Buy with confidence from the originator & industry leader of brake kits

Brake Pad Set

Dual Technology Ceramic (DTC) – Low Noise – Low Dust WBR ceramic brake pads are specially formulated for driving conditions that require superior friction effectiveness without compromising low noise or low dust characteristics. The advanced ceramic formulation mitigates wheel dust, brake fade, low speed and high heat squeal, at the same time providing positive pedal feel and long-life. Every WBR ceramic brake pad comes with a platform specific shim and has a burnished contact surface (scorched) just like OEM pads to ensure easy break-in and proper long-term functionality. Advanced Material Platform Specific Brake Pad Shims: To effectively combat brake squeal, WBR utilizes different advanced materials in the shim construction, as well as fastening the shim to the pad with both mechanical tabs and silicone adhesives. This platform specific advanced material shim design is included with every WBR brake pad.

Product Features:

• Original Equipment Performance
• Solid Pedal Feel With Smooth Braking Performance
• Ultra-Quiet Ceramic Formulation
• Low Dust – Long Life
• Advanced Material Platform Specific Shims
• Scorched for Easy Break In
• Positive Mold Construction
• All WBR Pads are 100% Shimmed

Wearever Brake Calipers feature phenolic pistons that are constructed from a uniformly dense, structurally superior material to offer superior heat protection and performance. Each caliper includes brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.

Product Features:

• Phenolic pistons are uniformly dense and made from a structurally superior material that withstands rust, corrosion and the reapplication of heat that would normally be transferred to the brake fluid.
• Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
• Mounting bracket is included where applicable for a hassle-free installation.
• Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
• New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
• New bleeder screws provide trouble-free bleeding and a positive seal.
• New washers are included where applicable for a proper seal.
• A plastic cap plug protects every brake port thread to ensure a trouble free installation.
• New stainless steel hardware clips and new mounting pins are included where applicable.

StopTech is the high performance and racing brand from Centric Parts – a leading innovator of world class brake components and systems for production-based race cars and high performance vehicles on the street and track. StopTech was the first to offer balanced brake upgrades for production cars and remains the worldwide leader with over 700 platform offerings that dramatically improve overall braking performance.

Product Features:

• Premium e-coated rotor with advanced metallurgy that greatly reduces pad squeal
• Especially effective with higher friction, European style brake pad compounds
• Slotted for increased bite, improved looks and better performance

StopTech is the high performance and racing brand from Centric Parts – a leading innovator of world class brake components and systems for production-based race cars and high performance vehicles on the street and track. StopTech was the first to offer balanced brake upgrades for production cars and remains the worldwide leader with over 700 platform offerings that dramatically improve overall braking performance.

Product Features:

• Premium e-coated rotor with advanced metallurgy that greatly reduces pad squeal
• Especially effective with higher friction, European style brake pad compounds
• Slotted for increased bite, improved looks and better performance

Akebono EURO® Ultra-Premium ceramic brake pads provide exactly the ideal vehicle control and performance response intended by the manufacturers of European makes. Maintain the enhanced pedal feel of European braking performance with brake pads and friction formulas engineered specifically for your vehicle and manufactured in the USA. Brake Pads That Ensure Optimal Responsiveness and Cleaner Wheels European car owners across North America now have a brake pad solution that will keep their wheels virtually free from dust and provide the European stopping power they expect. The use of our exclusive, highly advanced ceramic brake pad technology means that Akebono’s EURO Ultra-Premium brake pads provide excellent stopping power while extending rotor life and virtually eliminating brake dust, so the wheels on your European vehicle will remain their cleanest. In addition, Akebono EURO Ultra-Premium ceramic brake pads control noise, vibration, and harshness (NVH) and help ensure longer rotor life. They are the ultimate upgrade for semi-metallic and low-metallic brake pads. Akebono: The Industry Standard for European Manufacturers For over two decades, Akebono Ceramic Technology® (ACT) has been standard on many of North America’s passenger cars, light trucks, and SUVs and has set the benchmark for ceramic pads used in OE vehicle production. Now European manufacturers request Akebono brake products, and we can deliver that level of reliability to your replacement brake pads. Akebono manufactures replacement disc pads that contain the same materials, engineering, quality standards, and advanced technologies used to create our original ceramic brake pads. The use of Akebono ceramic brake pads ensures customer satisfaction and eliminates unnecessary return visits to the shop.

Product Features:

• Ultimate upgrade for OE semi-metallic, organic and low-metallic brake pads
• Ultra-Quiet – controls noise, vibration and harshness level
• European braking performance with enhanced pedal feel
• Extremely rotor friendly for longer rotor life
• Friction formulas specially designed for European vehicles

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Our Z26 Street Warrior Brake Upgrade Kit is recommended for high performance, high horsepower muscle and modified cars. This kit comes with everything you need for easy installation, including pads, rotors and stainless-steel hardware. The Drilled & Slotted rotors and Carbon-Fiber Ceramic pads combine to provide shorter stops under the most demanding conditions. This PowerStop Z26 Street Warrior Brake Upgrade Kit is the affordable bolt-on upgrade that delivers more than just the braking power you need to rein in all those ponies. With our low-dust and low-noise formula, you’ll spend less time cleaning those wheels and more time enjoying what matters most – the drive.

Product Features:

• This complete brake kit has been engineered to handle the increased demand of street-driven muscle cars and performance vehicles
• Proprietary Carbon-Fiber Ceramic Z26 brake pads enhance heat dissipation versus a typical ceramic brake pad for better stopping power at high speed
• Stainless-steel pad shims resist the increased temperatures common on high performance applications
• Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Drilled & Slotted performance rotors provide maximum cooling
• Bolt-on upgrade for stock brakes, no modifications necessary
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Brake rotor, pad & hardware engineered to work together to increase stopping power & enhance heat dissipation for your performance car
• Rotors are zinc plated for maximum protection against rust.
• Includes 1 Front & 1 Rear Sensor Wire
• Buy with confidence from the originator & industry leader of brake kits

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. If you are an experienced track day enthusiast running R-Compound tires, or compete in a spec racing series such as Spec Miata and want the ultimate performance brake pads, then look no further than PowerStop Track Day Spec High-Performance Brake Kit. This kit comes complete with PowerStop Track Day Spec brake pads and Autospecialty rotors, taking the guesswork out of purchasing brakes for track use. As the official brake supplier of Radford Racing School (formerly Bondurant), Track Day Spec brake pads are data-driven and tested to provide extreme fade resistance, low thermal conductivity, and consistent pedal feel. These platform-specific brake pads have an excellent coefficient of friction and resist fade during the rigors of your favorite track day event or competitive spec racing series. The Autospecialty brake rotors are 100% dynamic mill-balanced and provide a direct fit solution for your vehicle. When you are on the track, have confidence and control at every corner with PowerStop Track Day Spec High-Performance Brake Kit.

Product Features:

• Stage 2 brake kit for more advanced drivers.
• OE style non-coated replacement rotors are mill-balanced to ensure a smooth ride
• Friction material designed specifically for high-level track day and/or competitive (spec series) use in mind
• Very consistent and stable modulation
• Good coefficient of friction when cold, maximum performance when hot.
• Abutment Clips, Tension Clips, or Pin Bushings included
• Includes 1 Front & 1 Rear Sensor Wire
• Official brakes of Radford Racing School
• Buy with confidence from the originator & industry leader of brake kits

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Our Z26 Street Warrior Brake Upgrade Kit with Powder Coated Calipers is recommended for high performance, high horsepower muscle and modified cars. This kit comes with everything you need for easy installation, including pads, rotors, calipers and stainless-steel hardware. The Drilled & Slotted rotors and Carbon-Fiber Ceramic pads combine to provide shorter stops under the most demanding conditions. The Powder Coated Calipers not only protect against corrosion, but also really stand out behind your wheels! This PowerStop Z26 Street Warrior Brake Upgrade Kit with Powder Coated Calipers is the affordable bolt-on upgrade that delivers more than just the braking power you need to rein in all those ponies. With our low-dust and low-noise formula, you’ll spend less time cleaning those wheels and more time enjoying what matters most – the drive.

Product Features:

• This complete brake kit has been engineered to handle the increased demand of street-driven muscle cars and performance vehicles
• Proprietary Carbon-Fiber Ceramic Z26 brake pads enhance heat dissipation versus a typical ceramic brake pad for better stopping power at high speed
• All calipers are powder coated, assembled, and tested in our Chicago, IL facility
• Stainless-steel pad shims resist the increased temperatures common on high performance applications
• Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Drilled & Slotted performance rotors provide maximum cooling
• Bolt-on upgrade for stock brakes, no modifications necessary
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Rotors are zinc plated for maximum protection against rust.
• Includes 1 Front Sensor Wire
• Buy with confidence from the originator & industry leader of brake kits

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Our Z26 Street Warrior Brake Upgrade Kit is recommended for high performance, high horsepower muscle and modified cars. This kit comes with everything you need for easy installation, including pads, rotors and stainless-steel hardware. The Drilled & Slotted rotors and Carbon-Fiber Ceramic pads combine to provide shorter stops under the most demanding conditions. This PowerStop Z26 Street Warrior Brake Upgrade Kit is the affordable bolt-on upgrade that delivers more than just the braking power you need to rein in all those ponies. With our low-dust and low-noise formula, you’ll spend less time cleaning those wheels and more time enjoying what matters most – the drive.

Product Features:

• This complete brake kit has been engineered to handle the increased demand of street-driven muscle cars and performance vehicles
• Proprietary Carbon-Fiber Ceramic Z26 brake pads enhance heat dissipation versus a typical ceramic brake pad for better stopping power at high speed
• Stainless-steel pad shims resist the increased temperatures common on high performance applications
• Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Drilled & Slotted performance rotors provide maximum cooling
• Bolt-on upgrade for stock brakes, no modifications necessary
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Brake rotor, pad & hardware engineered to work together to increase stopping power & enhance heat dissipation for your performance car
• Rotors are zinc plated for maximum protection against rust.
• Includes 1 Front & 1 Rear Sensor Wire
• Buy with confidence from the originator & industry leader of brake kits

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
• Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• High Mileage Protection: Valvoline Full Synthetic High Mileage Engine Oil is specially designed to protect engines with over 75,000 miles against wear, friction, heat, and deposits, ensuring a longer lifespan for your vehicle.

Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:

• Better wear protection
• Increased fuel efficiency
• Better protection of the expensive catalytic emission system
• Improved compatibility with fuels containing ethanol
• Superior corrosion protection
• Meets ILSAC GF-5 and Dexos1 performance requirements

Valvoline Full Synthetic MaxLife Multi-Vehicle ATF, the No. 1 ATF product, suitable for use in 95% of vehicles. And now, it’s recommended for most belt & chain-driven continuously variable transmissions (CVT). Featuring advanced additives to prevent the major causes of transmission breakdown, it’s designed to help prevent leaks, reduce wear & tear, and maximize performance. Has improved thermal stability for longer fluid life, better viscosity stability for consistent transmission operation, and frictional enhancements for smooth gear engagements. Valv MaxLife Multi-Vehicle ATF is suitable for most Ford, GM, Toyota, Honda, Nissan, Hyundai, Subaru, BMW, Mercedes, Volvo, VW & Audi vehicles. Recommended for use in: GM DEXRON-II, DEXRON-III, DEXRON-VI, and DEX-CVT; Ford MERCON LV; Toyota/Lexus Type T, T-II, T-IV, WS, CVTF FE, and CVTF TC; Honda/Acura ATF-Z1 and Honda CVT; Nissan/Infiniti Matic-D, Matic-J, Matic-K and Matic-S; Hyundai/Kia SP-II, SP-III, SP-IV and SPH-IV; BMW 7045E, ETL 8072B, LA2634 and LT71141; Allison C-4; Mercedes-Benz NAG-1; Volvo 1161521, 1161540, 97340 and 1273.41; Subaru ATF HP, Lineartronic chain CVT and CVT-II, Lineartronic High Torque CVT, and CV-30; and VW/Audi G-052-025-A2 and G-052-162-A1. CURRENTLY UNABLE TO SHIP THIS PRODUCT TO CUSTOMERS LOCATED IN CALIFORNIA

Product Features:

• FOR USE IN 95% OF VEHICLES INCLUDING MOST CVTs in operation with US registered light duty applications
• HIGH PERFORMANCE CONDITIONING AGENTS prolong seal elasticity to prevent leaks
• IMPROVED DURABILITY & TRANSMISSION LIFE with anti-wear technology to avoid costly repairs
• ENHANCED HIGH & LOW TEMP PERFORMANCE supports transmission fluid in all weather situations

Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, MERCON LV and Allison C-4.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
• REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
• REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
• ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
• MaxLife Technology: Valvoline High Mileage with MaxLife Technology is specially formulated to maximize engine life in vehicles with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits.
• Synthetic Blend Composition: This motor oil features a unique combination of synthetic and premium conventional oils, ensuring optimal performance and protection for high-mileage engines.

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

• ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
• 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
• 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
• EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, GM dexos 1 Gen 3
• Enhanced Oil Stability: Resists oil breakdown 10-times better than industry standards, providing consistent performance and reliability.
• Premium Additives: Contains premium anti-wear additives, superior antioxidants, and extra detergents for maximum performance and engine longevity.

When the going gets tough, the tough get Valvoline Premium Blue. This premium heavy duty engine oil features proprietary One Solution GEN2 Technology designed to protect hardworking diesel, gasoline and natural gas engines in both on-highway and off-highway applications. Our patented, formula is engineered to outperform: resisting oxidation, deposits, corrosion and wear better than industry standards. No wonder it’s The Only One exclusively endorsed and recommended by Cummins for both on road and off highway applications. It’s specially formulated for faster and safer cold starts and has enhanced thermal properties for hot weather operations to help ensure year-round performance. Plus, extended drain intervals reduce oil changes so your engine can work longer between downtime.

Product Features:

• EXCELLENT WEAR PROTECTION IN HEAVY DUTY APPLICATIONS that can take a toll on critical internal moving parts
• RESISTS OXIDATION AND FIGHTS DEPOSITS with high quality base oils and special inhibitors
• PROTECTS DURING COLD START UPS WHILE CONTROLING SOOT as heavy-duty equipment can sit idle for extended periods of time
• PROPRIETARY ONE SOLUTION GEN2 TECHNOLOGY designed to protect hardworking diesel, gasoline and natural gas engines in both on-highway and off-highway applications
• UNIQUE 5,000 MILES OIL DRAINS EXTENSION in Cummins X15/X12 engines when average is 7mpg or higher

Prestone® Power Steering Fluid (PSF) delivers increased system life. Designed with Anti-wear System Protection, Prestone PSF protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

• 50,000 Mile Fluid Life
• Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
• For use in all manufacturers
• Conventional Formula – For use in all manufacturers

Valvoline Daily Protection Motor Oil is specially formulated to exceed industry standards for wear, deposit and sludge protection to help keep engines running like new. Developed with high quality additives and premium base oils, it’s designed to flow easily at cold temperatures, reducing wear at startup and providing added protection against motor oil breakdown in tough conditions. For enhanced fuel efficiency, choose Daily Protection Synthetic Blend 5W-20 or 5W-30. Developed with low-friction technology to support strong fuel economy.

Product Features:

• Extra wear protection designed to help keep automotive engine parts like new
• Added detergents help protect against sludge and deposits
• High quality additives resist motor oil breakdown in tough conditions
• Low-friction formula supports strong fuel efficiency
• Premium formulation flows easily at low temperatures reducing wear at start-up

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
• Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• Extends engine life: MaxLife High Mileage Full Synthetic Oil is designed to extend the life of higher mileage vehicles, providing superior protection against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs

Valvoline ATF for MERCON V Applications is a high-quality transmission fluid meeting and exceeding the requirements of the Ford Mercon V specification which covers most Ford passenger cars and light-duty trucks (except those specifying MERCON SP, MERCON LV, MERCON ULV or Type F fluids), including Lincoln and Mercury, as well as most pre-2006 GM vehicles and many imports. Recommended for use in the following applications: MERCON V, MERCON, DEXRON-III, DEXRON-II, Caterpillar TO-2, Allison C-4. Other applications include Power steering fluid where a DEXRON or MERCON fluid is recommended. Suitable to use in Nissan Matic D, Matic J and Matic K.

Product Features:

• Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Pentosin CHF 11S is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 11S is especially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc. It is suitable for all extreme conditions and guarantees full performance from -40C to over 130C system temperature.

Product Features:

• Ideal for cold weather climates.
• Operating temperature range from -40C to 130C
• Works perfectly under extreme temperature changes.
• Used by more then 25 global vehicle manufactures as OE first-fill.

Pentofrost NF is an environmentally friendly antifreeze concentrate for multipurpose applications in water-cooled engines. It does not contain any nitrites, amines or phosphorous containing additives. Pentofrost NF protects all material used in cooling systems and is recommended for non ferrous metals and year-round use. Meets ASTM D-3306. Warning: this product contains substances known to the state of California to cause birth defects or other developmental harm.

Product Features:

• Manufactured to the OE applications specific formulation.
• Manufactured to the exact spec of DIN and ASTM D-3306.
• Protects against corrosion and cavitation.
• Does not foam.

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
• REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
• REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
• ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
• MaxLife Technology: Valvoline High Mileage with MaxLife Technology is specially formulated to maximize engine life in vehicles with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits.
• Synthetic Blend Composition: This motor oil features a unique combination of synthetic and premium conventional oils, ensuring optimal performance and protection for high-mileage engines.

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

• Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
• 40% better wear protection vs. industry standard as tested in the sequence ivb engine test
• 25% better deposit protection with superior engine cleaning detergents as tested in the gmod engine test
• Exceptional high/low temperature protection defends your motor no matter the weather conditions
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn, gm dexos 1 gen 3
• Superior engine protection: Valvoline SynPower Full Synthetic Engine Oil provides superior protection against engine sludge and varnish, ensuring your engine stays clean and running smoothly.

Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON, GM DEXRON-II and DEXRON-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III, Toyota/Lexus Type T, T-III and T-IV, Honda/Acura ATF-Z1 (except in CVTs), Mercedes Benz NAG1, Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON®, GM DEXRON®-II and DEXRON®-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III , Toyota/Lexus Type T, T-III and T-IV , Honda/Acura ATF-Z1 (except in CVTs) , Mercedes Benz NAG1 , Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
• Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• High Mileage Oil Class: Valvoline MaxLife Synthetic Engine Oil is specially designed for engines with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repair

Pentosin Super DOT 4 is a brake fluid of superior quality for universal use in modern brake systems and ideal for vehicles with ABS systems. Pentosin Super DOT 4 offers safety against vapor lock; it has excellent resistance to absorbing and retaining water and provides superior corrosion resistance.

Product Features:

• Safety against vapor lock
• Provides superior corrosion resistance
• Long-term resistance to absorbing and retaining water.

Automatic transmission fluid is a technologically advanced, low viscosity formulation specially designed to deliver performance and maximum fuel efficiency for modern automatic transmissions.

Product Features:

• Full Synthetic, low viscosity formulation
• OEM approved and licensed by Ford (MERCON® LV) and GM (DEXRON® -VI)
• Low viscosity formula for maximum fuel efficiency in modern automatic transmissions
• Enhanced friction durability for smooth transmission performance
• Superior high temperature protection to effectively resist oxidation
• Unsurpassed protection against copper corrosion
• Industry Specifications and OEM Approvals: JASO-1A
• Licensed and approved for use in: All GM vehicles (DEXRON®-VI, All previous DEXRON®); All Ford vehicles which specify Mercon® LV

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
• REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
• REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
• ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN

Castrol® Transmax DEX/MERC includes enhanced friction durability for smooth transmission performance. Designed for use in older Ford and GM vehicles.

Product Features:

• Enhanced friction durability for smooth transmission performance
• Meets DEXRON®-III H requirements; also satisfies requirements of DEXRON®, DEXRON®-III, IIE, and II; do not use this ATF in applications calling for DEXRON®-VI
• Meets MERCON® requirements; may also be used in power steering applications where MERCON® is required; use Castrol Type F ATF in applications calling for Type F
• Do not use this ATF in applications calling for MERCON® V or MERCON® SP

Prestone® Power Steering Fluid + Stop Leak (PSF+SL) delivers increased system life and prevents & stops system leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. The stop leak additives also prevent leaks by rejuvenating seals before they leak. Also designed with Anti-wear System Protection, Prestone PSF+SL protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

• 50,000 Mile Fluid Life
• Includes Stop Leak Additives to prevent and stop power steering system leaks.
• Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
• Conventional Formula – For use in all manufacturers

Prestone All Vehicles antifreeze+coolant (ready to use) is truly designed to work with all vehicles; all makes, models, years & fluid colors. It is designed to work with all new engines while also being backwards compatible improving protection in all older engines. The patented Cor-Guard technology (the best innovation in the category in decades) instantly protects parts from corrosion, buildup, pitting, scaling, rust and other damage. These fluids are specially designed to not only manage the engine temp and protect from freezing up (like competitors), but they also potect the engine from damage. Internal damage can cause engine part failure, leading to expensive repairs and serious inconveniences. Avoid costly repairs and vehicles in the shop with Prestone All Vehicles antifreeze+coolant. This fluid is designed to last 10yrs / 300,000 miles and also to protect the internal parts of the engine for 10yrs / 300,000, offically patented by Prestone.

Product Features:

• Formulated to work with All Vehicles. Works with all fluid colors; All OAT, POAT, HOAT & IAT.
• Longer Engine Life Guarantee – 10 Yr., 300,000 mile Extended life formula.
• Includes patented Prestone CorGuard technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
• Ready to Use formula (prediluted to a 50% Eg & 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system

Prestone All Vehicles antifreeze+coolant (concentrate) is truly designed to work with all vehicles; all makes, models, years & fluid colors. It is designed to work with all new engines, while also being backwards compatible improving protection in all older engines. The patented Cor-Guard technology (the best innovation in the category in decades) instantly protects parts from corrosion, buildup, pitting, scaling, rust and other damage. Prestone’s Antifreeze + Coolants are designed to the highest standards using state of the art technology. These fluids are specially designed to not only manage the engine temp and protect from freezing up (like competitors), but they also protect the engine from damage. internal damage can cause engine part failure, expensive repairs and serious inconveniences . Avoid costly repairs and vehicles in the shop with Prestone All Vehicles antifreeze+coolant. This fluid is designed to last 10yrs / 300,000 miles and also to protect the internal parts of the engine for 10yrs / 300,000, offically patented by Prestone.

Product Features:

• Formulated to work with All Vehicles. Works with all fluid colors; All OAT, POAT, HOAT & IAT.
• Longer Engine Life Guarantee – 10 Yr., 300,000 mile Extended life formula.
• Includes patented Prestone CorGuard technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
• Concentrate formula. Must mix with distilled to the desired mix ratio of EG & water. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for EUROPEAN VEHICLES is a line of premium coolants specifically designed to match the technology and color requirements of European vehicles. Each coolant is formulated with the same corrosion inhibitor technology that protected your vehicle straight from the factory. Color cues on the packaging and a list of covered vehicles on the front label make it easy to identify the right match for your specific vehicle. PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for EUROPEAN VEHICLES – BLUE is an ethylene glycol-based antifreeze/coolant specifically developed for use in any European vehicle requiring a Blue silicate-enhanced hybrid organic acid technology (Si-HOAT) formula. It contains high-quality organic and inorganic corrosion inhibitors and is free of nitrite, phosphate and amines chemicals. PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for EUROPEAN VEHICLES – BLUE meets the performance requirements of ASTM D3306 and BS 6580. With a complete flush and fill, PEAK guarantees this coolant will provide service life protection of up to 150,000 miles or 5 years.

Product Features:

• Matches each European vehicle manufacturer’s technology and color requirements
• Protects all cooling system metals from rust and corrosion
• Meets the performance requirements of ASTM D3306 and BS 6580
• Service life of up to 5 years/150,000 miles with a complete cooling system flush and fill
• Color-coding and vehicle applications listed on the front simplify selecting the right antifreeze/coolant
• Available as both concentrate and 50/50 products to do the job right
• Testing Requirements: For proper freeze and boil over protection, use a traditional refractometer or hydrometer to measure the percentage of ethylene glycol by volume.

Fram Extended Life All Vehicles Concentrate is compatible with ANY antifreeze/coolant in ANY vehicle with aluminum or other cooling system metals. The formulas have a blend of long-lasting inhibitors to guard against temperature extremes and the effects of rust, corrosion, and premature water pump failure. FRAM Concentrate meets or exceeds ASTM D3306 and D4985 for corrosion protection for cars and light duty trucks, while providing reliable freeze-up & boil-over protection.

Product Features:

• Formulated to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT & IAT
• 5 Yr., 150,000 mile Extended life formula.
• Meets or exceeds ASTM D3306 & D4985 for corrosion protection.
• Concentrated formula. Must mix with high quality (distilled/deionized) water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

PEAK® Antifreeze + Coolant Concentrate is specially engineered to deliver guaranteed superior lifetime protection. Its advanced universal formula contains a proprietary blend of 10X the scale-fighting inhibitors coupled with robust organic additives to fight against the damaging effects of scale deposits and corrosion. PEAK Antifreeze + Coolant is free of 2-EHA, silicate, nitrite, borate, and amines, ensuring maximum cooling system performance for 10+ years/300,000+ miles. It is compatible for use with any color or type of antifreeze/coolant in the system.

Product Features:

• Specially formulated to deliver Superior Lifetime Protection against damaging scale and corrosion
• Contains 10X the scale-fighting inhibitors to ensure maximum cooling system performance
• Provides more than 2X the warranty coverage for 10+ years/300,000+ miles of service
• Universal formula is compatible with any color or type of antifreeze/coolant
• Meets the performance requirements of ASTM D3306 and D4985

FRAM Extended Life All Vehicles 50/50 is compatible with ANY antifreeze/coolant in ANY vehicle with aluminum or other cooling system metals. The formulas have a blend of long-lasting inhibitors to guard against temperature extremes and the effects of rust, corrosion, and premature water pump failure. Top-off your cooling system with FRAM Extended Life All Vehicles 50/50, which is a blend of 50% antifreeze and 50% demineralized water. FRAM 50/50 meets or exceeds ASTM D3306 and D4985 for corrosion protection for cars and light duty trucks, while providing reliable freeze-up & boil-over protection.

Product Features:

• Formulated to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT & IAT
• 5 Yr., 150,000 mile Extended life formula.
• Meets or exceeds ASTM D3306 & D4985 for corrosion protection.
• Ready to Use formula (prediluted to a 50% Eg & 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands of many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON*, DEXRON*-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

• Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

FRAM DEX III/MERC ATF is formulated for older model Ford and General Motors  vehicles requiring MERCON®, DEXRON-I®, DEXRON-II® and DEXRON-III®. It is also  recommended for transmissions, power steering systems, and hydraulic systems  requiring a DEXRONIII® or Caterpillar TO-2 fluid. FRAM DEX III/MERC ATF may also  be used in compressors, pumps, and hydraulic systems. FRAM DEX III-H/M ATF is  recommended for use in all transmissions, hydraulic systems, and power steering units  manufactured by American, European, Korean, Japanese and other manufactures from  around the world specifying DEXRON®III H/Mercon® and earlier DEXRON®/Mercon® type transmission fluids.

Product Features:

• Good foam and corrosion prevention
• Safe for seals
• Promotes smooth shifting
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
• TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL

FRAM Global ATF is formulated to meet the fluid needs of a broad range of automatic  transmissions. Using advanced additive technology and base fluids, it is suitable for service fill of  many transmissions manufactured by North American, Asian, and European OEMs. FRAM  Global ATF provides oxidation and thermal stability, friction control, load-carrying ability, corrosion  and wear protection. It helps protect against the formation of sludge, varnish and foam. FRAM Global ATF has exceptional low temperature flow properties and enhanced protection  against viscosity breakdown at high temperatures. It also has exceptional oxidation and thermal  stability, resulting in maximum service life.

Product Features:

• Maintains friction control for smooth shift action and protection against shudder
• Retains high temperature viscosity resulting in maximum oil film thickness and  excellent wear
• Controls sludge, corrosion, and wear of gears
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
• TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL

Prestone® European Vehicles (Teal) antifreeze+coolant (AFC) is our MOST ADVANCED TECHNOLOGY specially designed to work with all BMW®; All Mini®; All Volvo®; Mercedes® older than 2014; Volkswagen® older than 1997; Audi® older than 1997; Jaguar® older than 1999, Porsche® older than 1996. This extended life coolant is formulated for these engines and the specific needs placed on the coolant. Prestone’s Antifreeze+Coolants are designed to the highest standards using state of the art technology. These fluids are designed to not only manage the engine temp, antifreeze and antiboil, they also guard against rust & corrosion. This fluid is designed to last 5yrs / 150,000 miles. Year Round Protection – Antifreeze to -34 Deg. F; Antiboil/overheat protection to +265 Deg. F.

Product Features:

• Specially formulated to work with vehicles using teal colored fluid; HOAT or G48/G11. All BMWs; All Minis; All Volvos; Mercedes pre-2014; Volkswagen pre-1997; Audi pre-1997; Jaguar pre-1999; Porsche pre-1996.
• Superior protection guarantee – 5 Yr., 150,000 mile Extended life formula
• Includes protection against scale, rust and corrosion of all cooling system metals, including aluminum.
• Ready to Use formula – Prediluted 50/50. Perfect for small volume top-off or complete drain and refill of the cooling system

FRAM DEX III/MERC ATF is formulated for older model Ford and General Motors  vehicles requiring MERCON®, DEXRON-I®, DEXRON-II® and DEXRON-III®. It is also  recommended for transmissions, power steering systems, and hydraulic systems  requiring a DEXRONIII® or Caterpillar TO-2 fluid. FRAM DEX III/MERC ATF may also  be used in compressors, pumps, and hydraulic systems. FRAM DEX III-H/M ATF is  recommended for use in all transmissions, hydraulic systems, and power steering units  manufactured by American, European, Korean, Japanese and other manufactures from  around the world specifying DEXRON®III H/Mercon® and earlier DEXRON®/Mercon® type transmission fluids.

Product Features:

• Good foam and corrosion prevention
• Safe for seals
• Promotes smooth shifting
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
• TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL

FRAM Conventional Green Concentrate is an ethylene glycol-based product for use in car and light duty trucks that are already using a conventional coolant. The inhibitors prevent rust, corrosion, and provide freeze-up and boil-over protection. When used as directed, the Prime Green Concentrate Low Silicate formula provides full protection for a minimum of one year.

Product Features:

• Low Silicate Formula.
• When used as directed, will provide protection for a minimum of 1 year
• Meets or exceeds ASTM requirements for cars, light duty trucks
• Concentrated formula. Must mix with high quality (distilled/deionized) water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

Prestone® Power Steering Fluid + Stop Leak (PSF+SL) delivers increased system life and prevents & stops system leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. The stop leak additives also prevent leaks by rejuvenating seals before they leak. Also designed with Anti-wear System Protection, Prestone PSF+SL protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

• 50,000 Mile Fluid Life
• Includes Stop Leak Additives to prevent and stop power steering system leaks.
• Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
• Conventional Formula – For use in all manufacturers

Antifreeze Conventional Green 50/50 is an ethylene glycol-based product for use in car and light duty trucks that are already using a conventional coolant. The inhibitors prevent rust, corrosion, and provide freeze-up and boil-over protection. Prime Green 50/50 can be used to top-off cooling systems in vehicles using conventional AF/C, will not harm rubber parts, and meets ASTM D3306 and D4985 standards.

Product Features:

• Low Silicate Formula.
• When used as directed, will provide protection for a minimum of 1 year
• Meets or exceeds ASTM requirements for cars, light duty trucks
• Ready to Use formula (prediluted to a 50% Eg & 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system

Pentosin ATF 1 is a fully synthetic high performance Automatic Transmission Fluid (ATF) for life-time application in automatic gear boxes. Pentosin ATF 1 is formulated by means of the best commercially available synthetic base oils and additive components. A high performance shear stable VI-Improver plus modern antiwear chemistry and friction modifiers guarantee a sound stable friction performance in modern automatic transmissions equipped with an electronically controlled converter clutch.

Product Features:

• Formulated anti-wear chemistry and friction modifiers guarantee stable friction performance in modern transmissions.
• ATF 1 surpasses all Dexron III quality level requirements.
• Meets ZF TE 11B specification standards.
• A fully synthetic high performance ATF for life-time application in automatic gear boxes.

FRAM DEX III/MERC ATF is formulated for older model Ford and General Motors  vehicles requiring MERCON®, DEXRON-I®, DEXRON-II® and DEXRON-III®. It is also  recommended for transmissions, power steering systems, and hydraulic systems  requiring a DEXRONIII® or Caterpillar TO-2 fluid. FRAM DEX III/MERC ATF may also  be used in compressors, pumps, and hydraulic systems. FRAM DEX III-H/M ATF is  recommended for use in all transmissions, hydraulic systems, and power steering units  manufactured by American, European, Korean, Japanese and other manufactures from  around the world specifying DEXRON®III H/Mercon® and earlier DEXRON®/Mercon® type transmission fluids.

Product Features:

• Good foam and corrosion prevention
• Safe for seals
• Promotes smooth shifting
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
• TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL

Pentosin ATF 1 is a fully synthetic high performance Automatic Transmission Fluid (ATF) for life-time application in automatic gear boxes. Pentosin ATF 1 is formulated by means of the best commercially available synthetic base oils and additive components. A high performance shear stable VI-Improver plus modern antiwear chemistry and friction modifiers guarantee a sound stable friction performance in modern automatic transmissions equipped with an electronically controlled converter clutch.

Product Features:

• Formulated anti-wear chemistry and friction modifiers guarantee stable friction performance in modern transmissions.
• ATF 1 surpasses all Dexron III quality level requirements.
• Meets ZF TE 11B specification standards.
• A fully synthetic high performance ATF for life-time application in automatic gear boxes.

Castrol Transmax High Mileage is ideal for most transmissions with over 75,000 miles. It features additional seal conditioners to help stop leaks and cleaning agents to reduce varnish and deposit formation. It also protects against clutch wear and restores smooth shifting.

Product Features:

• Additional seal conditioners to prevent or help stop leaks
• Extra cleaning agents to reduce varnish and sludge formulation
• Protects against clutch wear
• Restores smooth shifting
• Greater frictional durability provides superior transmission performance
• Can be used in a wide variety of specifications including DEXRON-IIIH, MERCON and JASO-1A.
• Exceeds all passenger car and light truck manufacturer’s warranty requirements for vehicles, transmissions or power steering service where a DEXRON?-IIIH or MERCON? type ATF is specified

PENTOSIN ATF 6 1L

Full-Synthetic; Heavy Duty Automatic Transmission; BP Autran Syn-295 is a full-synthetic, heavy duty automatic transmission fluid approved for use under Allison TES-295. It is formulated to maintain its stability, even under the most severe operating conditions.

Product Features:

• Formulated with high viscosity index 100% synthetic base fluids and specific additives in order to exceed Allison requirements and provide outstanding wear protection
• Keeps transmissions cooler, offering excellent shear stability, low oxidation and high heat capacity
• Provides superior high/low temperature performance due to high VI synthetic base fluids and has excellent corrosion and foaming resistance
• BP Autran Syn-295 also has an Allison TES-468 approval for use in Allison Hybrid Electric Drive Transmissions
• Other OEM approvals include Allison C-4, Voith and ZF transmissions
• BP Autran Syn-295 is an ideal transmission fluid for light duty application vehicles, such as:
• Inter/intra-city buses & school buses
• Emergency vehicles
• Delivery trucks & vans
• Recreational vehicles & motor homes
• Refuse vehicles
• On/off-highway vehicles

Product Features:

• Reduces heat & wear
• Eliminates TQ converter shudder & clutch pack chatter
• For all automatic transmissions & 4×4 transfer cases

Automatic Transmission Fluid – 5 Liter Bottle

Introducing the ultimate protection for vehicles with more than 75,000 miles: Valvoline Extended Protection Full Synthetic High Mileage Motor Oil with Ultra MaxLife Technology. Engineered to maximize engine life, it’s 10x stronger against oil breakdown and provides 50% better wear protection than industry standards. The new formulation combines Valvoline’s premium full synthetic with Ultra MaxLife Technology featuring seal conditioners to rejuvenate aging seals and prevent oil leaks. The result is our best performing motor oil ever for high mileage vehicles. It helps prevent engine breakdown in extreme operating conditions and is proven to protect high-mileage motors against wear, friction, heat, and deposits – the leading causes of expensive repairs. After 75,000 miles, your engine is ready for greater protection. Upgrade to Valvoline Extended Protection Full Synthetic High Mileage with Ultra MaxLife Technology and keep your car on the road for years to come.

Product Features:

• Our best performing high-mileage engine oil is formulated with ultra maxlife technology, the ultimate protection for vehicles with more than 75,000 miles
• Valvoline extended protection full synthetic high mileage engine oil is designed with premium seal conditioners to treat and prevent oil leaks
• 10x stronger against oil breakdown and 50% greater wear protection than industry standards
• Enhanced wear additives and friction-fighting agents to safeguard critical engine components
• Maximizes engine life: Valvoline Extended Protection Full Synthetic High Mileage Engine Oil is engineered to maximize engine life, providing superior wear protection and preventing expensive repairs.
• Ultra MaxLife Technology: The new formulation combines Valvoline’s premium full synthetic with Ultra MaxLife Technology featuring seal conditioners to rejuvenate aging seals and prevent oil leaks.

Castrol Transmax ATF/CVT Universal is a technologically advanced, full-synthetic formulation designed to deliver excellent performance in most traditional step-shifting automatic transmissions and continuously variable transmissions currently in use. It is also suitable for use in hybrids. It is blended with premium base oils and an additive package that utilizes CastrolSmooth Drive Technology.

Product Features:

• Enhanced friction durability for smooth transmission performance
• Superior high temperature protection to effectively resist oxidation
• Unsurpassed protection against copper corrosion
• Broad scope of vehicle applications improves workshop efficiency and inventory management
• ATF Applications: Dexron VI (Dexron III, Dexron), Mercon LV (Mercon SP, Mercon V, Mercon), JASO 1A (03), JASO 1A LV (13), Toyota T IV, Toyota T III, Toyota WS, Honda/Acura DW 1/Z 1, Nissan Matic D, Matic J, Matic S, Hyundai/Kia SP IV, SP III
• ATF Applications: Mazda ATF M-V, M-III, FZ, Mitsubishi SP IV, SP III, IIM, II, PA, J3, VW/Audi (6, 8 & 9 speed automatics), BMW/Mini (6, 8 and 9 speed automatics), Jaguar/Land Rover (6, 8 & 9 speed automatics), Porsche (6, 8 & 9 speed automatics)
• ATF Applications: Volvo (6, 8 and 9 speed automatics), Volvo Transmission Oil 97342, AT102, Mercedes-Benz (7 and 9 speed automatics)
• CVT Applications: Toyota CVT Fluid TC, Toyota CVT Fluid FE , Nissan CVT Fluid NS-1, Nissan CVT Fluid NS-2, Nissan CVT Fluid NS-3, Subaru i-CVT Fluid, Subaru i-CVT FG, Subaru Lineartronic High Torque Chain CVTF, Honda HCF-2

Prestone® Platinum antifreeze+coolant is Prestone’s best universal antifreeze & coolant product. GUARANTEED to work with all vehicles; all makes, models, years & fluid colors. 15+ years, 350,000 miles of protection; the fluid is guaranteed for the life of your vehicle. This advanced product delivers Extreme Protection against both freezing temperatures (-50 Deg. F) and overheating / boiling over of the engine (+268 Deg. F). Prestone Platinum utilizes industry leading protection from engine damaging rust, corrosion, buildup & scale. While ordinary antifreeze coolant only focuses on the basic corrosion coverage, Prestone Platinum goes farther, adding our most advanced cooling sytem protection, allowing the system to run optimally, like when it was new. Internal buildup & corrosion damage can cause engine part failure or clogging, leading to expensive repairs and inconveniences. Prestone Platinum helps you avoid costly repairs and vehicles in the shop. This extended life coolant is guaranteed to work with all new engines and engine technology, while also being backwards compatible, improving protection in all older engines. Prestone Platinum antifreeze+coolant – Year Round Protection.

Product Features:

• Guaranteed to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT & IAT; G05®, G11®, G12®, G12++®, G13®, G30®, G40®, & GG40®. For all engines & engine sizes, new and older engines.
• 15+ Yr., 350,000 mile Extended life formula. The fluid is guaranteed for the life of your vehicle
• Includes our most advanced Prestone Cor-Guard® technology, unmatched cooling system parts protection that protects against engine damage; rust, corrosion, scale, build-up and clogging. Protection for 15+yrs / 350,000 miles.
• Concentrated formula. Must mix with high quality water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

CARQUEST offers high quality, high efficiency fuel filters for automotive, medium and heavy trucks as well as farm, construction, mining and other equipment applications.

Product Features:

• Keeps dirt, debris and contaminants from clogging fuel lines and causing erratic, unstable fuel performance
• Manufactured to a strict quality standards with 98% efficiency at a 10 micron rating.
• Provides maximum fuel system protection.
• Designed to meet or exceed Original Equipment specifications
• Protects the injectors from debris that cause damage and clogging.
• Provides less restriction preventing the fuel pump from working too hard.
• Superior materials, design and construction ensure CARQUEST fuel filters provide excellent performance under all types of operating conditions.

Replacing an air filter every 12 months or 12,000 miles can have a significant impact on engine performance and efficiency. PurolatorONE¿ Air Filters trap up to 99% of dirt, dust, soot and other debris, helping to protect your engine from damage. A new air filter may also help prevent engine wear, improve fuel efficiency and can even improve acceleration by up to 11% (U.S. DOE study). PurolatorONE Air Filters are widely available for most passenger cars and light trucks on the road today. Changing your air filter regularly is an easy way to keep your engine running at peak performance.

Product Features:

• Full synthetic or highly embossed media for superior strength and dirt holding capacity
• Blocks up to 99% of damaging dirt, soot and debris from entering your engine
• Optimizes engine airflow with precision fit polyurethane framing
• Helps improve acceleration and boost engine efficiency
• Employs steel grid backing, ridge supports or polyamide high temperature glue beads to provide superior strength and stability
• Meets or exceeds OE specifications; Trusted OE supplier

Seal Ring – Copper

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

• Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
• Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Dorman’s Engine Oil Drain Plug Gaskets are conveniently available in packs of varying quantities. Many styles are offered, including Copper, Aluminum, Nylon, Metal/Rubber, Inset, Fiber and Crush gaskets. Replacement is recommended at every oil change. Oil filter caps are available separately.

Product Features:

• Direct replacement gaskets and some universal gaskets available. Proper fit with the drain plug ensures a tight seal.
• Gaskets are also included with many of Dorman’s Engine Oil Drain Plugs and Pans
• Made to specific sizes and standards to ensure a proper fit
• Designed and constructed to strict engineering quality standards

Carquest Premium oil filters are built for durability, utilizing enhanced components to protect engines for the extended drain intervals of modern vehicles using conventional or synthetic lubricants. Our oil filters are built with synthetic blend media that provides 2X the capacity and up to 10,000 miles of protection. Carquest Premium filters feature silicone sealing gaskets for better performance in extreme temperatures. Carquest Premium oil filters meet or exceed original equipment (O.E.) specifications and meet the requirements for maintaining a new vehicle warranty.

Product Features:

• Protection for up to 10,000 miles
• Synthetic blend media provides 99.5% efficiency at 20 microns and 2X capacity vs. Standard filters
• Solid metal end caps are designed to be long lasting
• Silicone anti-drain back valve for engine start-up protection
• Heavy-duty steel baseplate provides additional strength to resist leakage
• Heavy gauge steel canister withstands high pressure operating conditions
• Silicone sealing gasket performs better in extreme temperature conditions and longer drain intervals (silicone gasket is new feature introduced as a running change)
• Meets requirements for maintaining new vehicle warranties

Carquest Premium cabin air filters are manufactured to the highest quality standards and field tested to ensure easy installation. Our cabin air filters are engineered to stop airborne contaminants from getting into the cabin while also protecting the delicate components of modern vehicle climate control systems. Carquest Premium cabin air filters utilize electrostatic particulate, non-woven media for longer filter life. Each Carquest Premium cabin air filter also includes application-specific installation instructions in the box to save you installation time.

Oil Drain Plug

Provides OE-quality filtration to remove contaminants and extend the life of your transmission. Domestic and import applications available. Where applicable, sure hold gaskets are designed to keep your pan gasket in place during installation. Filtering media may consist of felt, paper, or stainless screens that meet original or exceed original OE specifications. Meets or exceeds all OEM fit and quality requirements. High efficiency filtration. Prevents loose material from re-entering the transmission.

Product Features:

• Guaranteed OE quality form, fit and function
• Superior quality filter media traps harmful contaminants, ensuring clean transmission fluid to protect your transmission and its components
• Premium Sure Hold gaskets hold pan bolts in place for easy installation and guarantee a leak-free seal. Gasket may not be included with every kit.

AT Filter Kit

Crankcase Vent Valve

A clogged fuel filter could lead to contaminants in the engine fluid – a common source of engine system failures. Protect fuel pumps and fuel injectors from these costly malfunctions. A Purolator® Fuel Filter scrubs fuel clean of dirt, rust and other contaminants for smooth and efficient engine performance.

Product Features:

• Removes water from the fuel system
• Prevents rust and corrosion in your engine
• Keeps fuel contaminant free
• Replace annually for peak performance
• Meets or exceeds OE specifications

Blocks dust, dirt, bacteria and pollution that can interrupt engine performance. Designed to offer consistent air flow to help increase horsepower and acceleration

Product Features:

• Prescription filtration provides stronger resistance against moisture and collapse from rain and snow
• Optimum pleat count provides a higher filtration function
• Superior protection for vehicles in dusty or dirty environments, snow, high heat/humidity and frequent trips less than 10 miles

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Oil Filter Housing G

MTC develops and manufactures high quality OE specified polyurethane mounts, bushings and undercar components to the spare parts industry.

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

• Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
• Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Dorman’s Oil Drain Plugs are coated for high corrosion resistance and a long service life. Many styles are available, including standard, inset gasket, molded gasket, magnetic, and pilot point.

Product Features:

• Direct replacement for a proper fit every time
• Dorman’s oversized, piggyback, and rubber expanding plugs eliminate the need to replace the entire pan, saving you time, labor and money
• Our Oil Drain Plugs are designed and constructed to strict engineering quality standards
• Oil Drain Plugs are also included with many of Dorman’s Engine Oil Pans

Water Pipe O-Ring

Oil Drain Plug

Oil Drain Plug

Oil Filter Adapter O-Ring

NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency

Product Features:

• SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
• PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
• TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
• RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs

NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug

Product Features:

• ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
• RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
• NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal

NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:

• SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
• IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
• TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
• RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs

Increased performance with World’s smallest Iridium Center Eletrode (0.4mm).

Product Features:

• World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
• Patented 360-degree laser welding assembly process
• U-groove and taper cut ground electrode to maximize flame propagation.
• Withstands temperatures greater than 4000° Fahrenheit
• Burnished nickel plating for high temperature endurance and superior corrosion resistance
• Wide range of part numbers for thousands of applications, including classic and collector cars
• Iridium Power

The ground electrode is cut-back from the center electrode to provide a gap. The face of the ground electrode is concave to provide a constant gap to the center electrode. This plug is designed use in all aftermarket cylinder heads used in different types of racing venues including oval and road racing.

Product Features:

• Opens spark face for better ignitability of flame kernel
• Retains less heat, transfers heat to shell faster – reduces risk of pre-ignition
• Dyno testing has shown proven power gains
• Cut-back ground electrode evolved from practice of grinding back the side electrode

ACDelco Gold (Professional) Double Platinum Spark Plug are a high quality alternative to Original Equipment (OE) parts. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

• One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
• Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
• Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
• Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
• Premium aftermarket replacement part
• Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

• ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
• RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
• NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal

The Bosch Super Plus Spark Plug utilizes an yttrium enhanced copper core center electrode, making it one of the longest lasting copper core spark plug on the market – by 50% versus even OE plugs. Bosch Super Plus also features a tapered, v-profile ground electrode for improved cold starts and better fuel ignitability. Center Electrode Core Material: Nickel-Yttrium and Copper – Center Electrode Tip Material: Nickel-Yttrium – Ground Electrode Tip Material: Nickel-Chromium

Product Features:

• OE-Equivalent and direct fit application.
• Heavy-duty yttrium-enhanced copper core center electrode.
• Tapered, v-profile nickel chromium ground electrode.
• Nickel-plated rolled threads.
• Metal glass fused resistor.
• Angular, five-ribbed insulator design.
• Electrode gap is factory set and never requires adjustment.
• Anti-seize and corrosion protection. Bosch Super Plus Spark Plugs deliver quality performance based on technology that’s proven on racetracks around the world in the most sophisticated racing engines

Durability of an OE style plug combined with Power & Torque of high performance.

Product Features:

• 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
• 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
• DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
• DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
• Durability of an OE style plug combined with Power & Torque of high performance.
• Withstands temperatures greater than 4000░ Fahrenheit
• Iridium TT
• Ultimate Endurance and Power: The DENSO Iridium TT Spark Plug features a 0.7mm Iridium Tip, ensuring over 100,000 miles of uncompromised performance.
• Advanced Twin-Tip Technology: Developed from Original Equipment Specification Super Ignition Plug (SIP) design, combining a Fine Wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode.
• Enhanced Fuel Economy and Lower Emissions: Drive around the Earth over 4 times with improved fuel efficiency and reduced emissions.
• Premium Materials: Features an Iridium Center Electrode Tip and a Flat Seat Type for optimal performance and durability.

Our best spark plug! Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:

• 0.6 mm finewire design improves ignitability
• Patented V-trimmed platinum sidewire technology resists wear
• OE equivalent design is engineered for every engine
• Designed for better overall durability with virtually no gap erosion
• Double Iridium-Enhanced Alloy Technology Center Electrode: Offers improved durability and wear resistance for a longer-lasting spark plug.
• Designed and Engineered in the USA: Reflects over 100 years of Autolite’s engineering experience and expertise.
• Gasket Seat Type: Ensures a secure and proper fit for optimal performance.

With over 100 years of engineering expertise and more than 11 billion plugs sold, Autolite Platinum spark plugs are designed and engineered in the USA to deliver exceptional performance. Featuring a high nickel alloy side electrode that maintains a precise gap and a full platinum tip that ensures virtually no gap erosion, these spark plugs offer long-lasting durability. The necked-down center electrode fires quicker and cleaner with less voltage, resulting in easier starts, quicker acceleration, and improved fuel economy compared to standard plugs.

Product Features:

• High nickel alloy side electrode maintains precise gap
• Full platinum tip assures virtually no gap erosion for long life
• Necked-down center electrode fires quicker, cleaner with less voltage for easier starts, quicker acceleration and improved fuel economy (as compared to standard plugs)
• Exceptional Performance: Designed and engineered in the USA, Autolite Platinum Spark Plugs deliver superior performance with over 100 years of engineering expertise and more than 11 billion plugs sold.
• Gasket Seat Type: Equipped with a gasket seat type, these spark plugs provide a secure and effective seal for optimal engine performance.

Autolite® Copper spark plugs deliver quick starts, good fuel economy and smooth acceleration.

Product Features:

• One-Piece terminal stud provides a reliable high voltage electrical connection
• High alumina multi-rib insulator helps prevent flash-over which can lead to misfires
• Heat-fused glass composite resistor center seal provides high performance EMI noise suppression and a 100 percent leak-proof seal
• Solid copper core center electrode provides optimal thermal and electrical conductivity for better performance in all driving conditions
• High nickel alloy side electrode resists electrical and chemical wear providing excellent durability
• 2 year limited warranty

With over 100 years of engineering expertise and over 11 billion plugs sold, Autolite delivers exceptional quality. Designed and engineered in the USA, these spark plugs feature platinum-to-platinum firing, virtually eliminating gap erosion and reducing misfires. The OE design and full-platinum tips on both the center and side electrodes ensure reduced gap wear, while the platinum ball welding process provides a consistent point of contact for enhanced adhesion. This results in optimized engine performance, longer life, and improved fuel economy. The gasket seat type further enhances the plug’s reliability and durability.

Product Features:

• Works to optimize engine performance for a longer life and improved fuel economy
• OE design
• Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
• Platinum ball welding process provides a consistent point of contact for enhanced adhesion
• Gasket Seat Type: Equipped with a gasket seat type that enhances the spark plug’s reliability and durability.
• Proven Quality: Backed by over 100 years of engineering expertise and over 11 billion plugs sold, Autolite delivers exceptional quality and performance.

The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.56 is a 14mm, 0.750 reach plug with a gasket seat. It fits a wide variety of late model applications, especially import. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:

• E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn
• Smoother Acceleration & Idle – The faster flame initiated by the The spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
• Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
• Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
• E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
• The Spark Plugs are pre-gapped at the factory and cannot be adjusted.

ACDelco Gold (Professional) RAPIDFIRE Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These RAPIDFIRE Single Platinum Performance Spark Plugs are designed for everyday use and are a high quality replacement for many vehicles on the road today. These premium aftermarket spark plugs have high-quality suppressors that help prevent misfiring, an improved plug to boot seal, and a pure copper core for greater durability. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

• Solid state suppressor, with two-piece glass and brass seal, can help reduce radio frequency interference, regulates spark energy for long electrode life, and helps protect against high combustion pressures
• Pure copper core provides great heat transfer and helps maximize plug durability
• Platinum on center electrode enables superior spark characteristics and can reduce voltage requirements of the ignition system
• Ribless insulator helps optimize plug to boot seal
• Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
• Premium aftermarket replacement part
• Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

Champion® Platinum Power spark plugs deliver powerful performance with their premium design. Featuring a platinum center electrode for long life and a fine-wire center electrode for greater ignitability, these spark plugs ensure optimal performance. The V-trimmed ground electrode promotes sharper spark focus, while the exclusive Heat-Active alloy allows the electrodes to reach optimal temperature. The platinum-tipped center wire resists wear and helps maintain the proper gap specification over the life of the plug, making it a reliable choice for your vehicle.

Product Features:

• Platinum Power- Premium Spark Plug. Powerful Performance.
• Platinum center electrode for long life
• Fine-wire center electrode for greater ignitability
• V-trimmed ground electrode promotes sharper spark focus
• Heat-Active alloy allows electrodes to reach optimal temperature
• Platinum tipped center wire resists wear and helps to maintain proper gap spec over life of the plug
• Platinum Center Electrode: The Champion Platinum Power Spark Plug features a platinum center electrode for extended durability and long-lasting performance.

This spark plug features a platinum twin-tip design and a titanium-enhanced ground strap, ensuring superior performance and longevity. The center electrode tip is made from high-quality platinum, providing excellent conductivity and durability. Additionally, the flat seat type ensures a secure and precise fit, making it an ideal choice for enhancing your vehicle’s ignition system.

Product Features:

• Platinum Twin-Tip Design: Features a platinum twin-tip design for enhanced ignition performance and efficiency.
• Titanium-Enhanced Ground Strap: Equipped with a titanium-enhanced ground strap, ensuring superior performance and longevity.
• High-Quality Platinum Center Electrode: The center electrode tip is made from high-quality platinum, providing excellent conductivity and durability.
• Superior Performance and Longevity: Designed to deliver superior performance and extended lifespan, making it a reliable choice for your vehicle’s ignition needs.

OEM specified special ground electrode configuration.

Product Features:

• OEM specified special ground electrode configuration
• Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads
• Wide range of part numbers for thousands of applications, including classic and collector cars
• Lasts twice as long as most conventional plugs
• 100% pre-fired to assure reliable operation
• U-Groove Conventional

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles.
• Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
• Durable construction – made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

ACDelco GM Original Equipment Conventional Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

• GM regularly updates production and service part designs to integrate new materials and technologies
• High-Quality Copper Core: Designed with high-quality copper cores for reliable performance and efficient operation.
• Nickel Center Electrode Tip: Features a nickel center electrode tip for enhanced durability and consistent performance.
• OE Replacement: These spark plugs are true OE parts, originally installed or validated by General Motors for GM vehicles.
• Outstanding Suppression Characteristics: Engineered to deliver outstanding suppression characteristics, ensuring smooth and efficient engine performance.
• Versatile Applications: Providing a high-quality replacement for a wide range of vehicles.

Optimal Performance, Durability, Ignitability. The Autolite Iridium Ultra is an engineered OE replacement iridium spark plug featuring a laser-welded 0.5mm proprietary iridium alloy finewire center electrode that ensures optimal fuel efficiency, acceleration, and focused ignitability. Its nickel-plated shell resists corrosion, while the high-alumina ceramic insulator provides increased strength. Additionally, the proprietary platinum sidewire technology enhances durability and performance, making it a top choice for reliable ignition. It also features a resistor type and a flat seat type for added compatibility and performance.

Product Features:

• Autolite Iridium Ultra is an engineered OE replacement iridium spark plug.
• A laser-welded 0.5mm proprietary iridium alloy finewire center electrode provides optimal fuel efficiency, acceleration and focused ignitability.
• Nickel-plated shell to resist corrosion.
• High-alumina ceramic insulator for increased strength.
• Laser welded 0.5mm Iridium finewire center electrode.
• Proprietary platinum sidewire technology.

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
• Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure confidence and product reliability, every time.

NGK tinned copper core wire sets provide excellent OE fit, performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. As required on certain Europ

Product Features:

• PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
• BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
• STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
• CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

Benefits of Bosch original equipment quality ignitions coils include the right ignition voltage, long lasting spark, better engine running conditions, lower fuel consumption, and reduced exhaust emissions.

Product Features:

• Meets or exceeds OEM specification
• Ensures reliable voltage for smooth engine performance

Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:

• Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
• Delphi ignition coils are designed to insert power into spark plugs to ensure fast starts, consistent engine performance and optimized fuel efficiency
• Delphi uses smart winding process techniques to controls wire lengths, keeping voltage the same
• We manufacture our ignition coils with a high quality wire coating that resists imperfections that lead to failure

High-performance ignition coils from Bosch guarantee a reliable voltage from the start, more ignition energy to ensure that your engine starts and runs smoothly. Bosch ignition systems combine the security of fully developed system engineering with the employment of the latest technology. The application of Bosch ignition coils ensures all advantages of the original equipment. Bosch Ignition coils provide more ignition energy to ensure that your engine starts well and runs smoothly. High-performance ignition coils from Bosch guarantee a reliable voltage from the start.

Product Features:

• Demand controlled ignition voltage
• Long spark duration
• Better engine performance
• Reduced fuel consumption
• Reduced obnoxious emissions in exhaust gas

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Bosch Knock Sensors are highly accurate and sensitive to detect engine knock, ensuring efficient performance and long life of your vehicle.

Product Features:

• High Precision Even under Extreme Conditions
• Improved efficiency and prolonged engine life
• Linear signal over large frequency range

Ignition Coil

3X longer service life compared to standard copper plugs Bosch Double Platinum spark plugs are engineered to extend performance life and durability. The fine wire design of the center electrode improves ignitability and performance in your engine while the platinum tip on both the center and ground electrodes ensure longer life. All backed by a 6-year performance satisfaction guarantee. Center Electrode Core Material: Nickel-Yttrium and Copper and Platinum – Center Electrode Tip Material: Platinum – Ground Electrode Tip Material: Nickel-Yttrium and Platinum

Product Features:

• OE design for optimum fit and function
• Fine wire design delivers improved ignitability and performance life
• Center electrode is an ultra fine wire design.
• Copper core provides broader heat range to resist pre-ignition
• Tapered shape ground electrode reduces flame shrouding for improved combustion
• Yttrium enhanced to resist wear
• Nickel-plated shell with rolled threads
• Ribbed insulator design

The NGK G Power platinum tip spark plug provides improved fuel efficiency, lower emissions and quicker reliable starts. The fine platinum tip reduces the voltage requirements and is extremely durable under high heat combustion. Improved Fuel Efficiency, Lower Emissions, Quicker Starts.

Product Features:

• Fine Wire Platinum Tipped Center Electrode Reduces Required Voltage for Better Starts, Superior Acceleration and Increased Fuel Economy
• Trapezoid Cut Ground Electrode Reduces Quenching
• Trivalent Metal Plating Provides Superior Anti-Corrosion and Anti-Seizing Properties
• Corrugated Ribs Prevent Flashover
• Pure Alumina Silicate Ceramic Insulator, Provides Superior Strength and Better Heat Transfer
• Copper Core Aids in Heat Removal
• Triple Seals Prevent Leakage

The NGK Standard copper core spark plug provides OEM quality, consistent performance and extended long life.

Product Features:

• Trivalent Metal Plating Provides Superior Anti-Corrosion and Anti-Seizing Properties
• Corrugated Ribs Prevent Flashover
• Pure Alumina Silicate Ceramic Insulator, Provides Superior Strength and Better Heat Transfer
• Copper Core Aids in Heat Removal
• Triple Seals Prevent Leakage