BMW 318i Parts

BMW 318i Body Parts

Vaico – Rivet, Plastic Spread Rivet (Part No.Q2001406550VCO)

Rivet, Plastic Spread Rivet

from

$0.87
Choosing from the comprehensive VIEROL product range means opting for outstanding quality. This is confirmed by the Q+ quality seal for parts in OEM quality MADE IN GERMANY. VIEROL AG is a leading automotive parts distributor located in Oldenburg, Germany. With the trademarks VAICO and VEMO are the service market leaders in more than 125 countries worldwide. As an internationally present automotive supplier, VIEROL AG specializes in electronic and electrical components for German and European vehicles. VIEROL AG quality brands VEMO and VAICO combine innovation and experience, technical expertise and practiced corporate values, commitment to precision and a passion for technology: the invisible, but unquestionable, optimal prerequisites for guaranteed product quality and globally recognized service. Choosing from the comprehensive VIEROL product range means opting for outstanding quality.
See More

KAI – Fender Splash Shield (Part No.BM1250105)

Fender Splash Shield

from

$14.99
New Standard Replacement Driver Side Fender Liner/Splash Shield

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Aftermarket – Regulator Sliding Pi (Part No.O303657568AFT)

Regulator Sliding Pi

from

$5.00
Regulator Sliding Pi

Rein – Suspension Bump Stop (Part No.AVZ0199P)

Suspension Bump Stop

from

$15.49
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:
  • Rubber bump stops match the shore hardness of the original equipment bump stop to ensure maximum performance and product longevity
  • Matches Original Equipment design specifications
  • Recommend to replace bump stops in pairs to ensure best performance. Note: Bump Stop Sets contain the needed pair
See More

MTC – Door Check (Part No.O301020127MTC)

Door Check

from

$51.59
MTC develops and manufactures high quality OE specified polyurethane mounts, bushings and undercar components to the spare parts industry.
See More

Stabilus – Gas Charged Hood Strut (Part No.O202049868STB)

Gas Charged Hood Strut

from

$49.31
STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:
  • Restores the original opening and closing speeds of your hood, hatch or trunk
  • Easy-to-install
  • No special tools required
  • Engineered for your application
  • Easy lifting and reduced closing effort
  • Consistent lifting force through 50,000 cycles
  • Rust-resistant piston rod extends product life
  • Dynamic damping technology, available on select lift supports
See More

VDO – Fuel Door Actuator (Part No.E2016323278VDO)

Fuel Door Actuator

from

$78.43
Fuel Door Actuator

Le Bra – Front End Cover (Part No.55095-01)

Front End Cover

from

$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
  • Protect against rock chips, bugs and road tar
  • Soft inner layer
See More

MTC – Sunroof Handle (Part No.O704020986MTC)

Sunroof Handle

from

$43.61
MTC develops and manufactures high quality OE specified polyurethane mounts, bushings and undercar components to the spare parts industry.
See More

Stabilus – Conv. Top Cover Shoc (Part No.O206535207STB)

Conv. Top Cover Shoc

from

$69.72
STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:
  • Restores the original opening and closing speeds of your hood, hatch or trunk
  • Easy-to-install
  • No special tools required
  • Engineered for your application
  • Easy lifting and reduced closing effort
  • Consistent lifting force through 50,000 cycles
  • Rust-resistant piston rod extends product life
  • Dynamic damping technology, available on select lift supports
See More

Burco – Side View Replacement Mirror (Part No.3586)

Side View Replacement Mirror

from

$39.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:
  • Made in USA
  • Exact Fit
  • Safety Smooth Edges
  • Replaces OE Mirror
  • Premium Mirror Glass
  • Break-Free Guarantee
  • Instructions Included
See More

BBR Automotive – Emblem Retainer (Part No.O5019319717BBR)

Emblem Retainer

from

$1.22
Emblem Retainer

Pentosin – CHF11S Hi-Perf Power Steering Fluid for European Autos – Approved for Audis (Part No.3J100337733PEN)

CHF11S Hi-Perf Power Steering Fluid for European Autos - Approved for Audis

from

$33.60
CHF11S Hi-Perf Power Steering Fluid for European Autos – Approved for Audis

Programa – Central Lock Switch (Part No.O403021143PRO)

Central Lock Switch

from

$194.29
Central Lock Switch

Vaico – Screw (Part No.Y2003392470VCO)

Screw

from

$1.46
Choosing from the comprehensive VIEROL product range means opting for outstanding quality. This is confirmed by the Q+ quality seal for parts in OEM quality MADE IN GERMANY. VIEROL AG is a leading automotive parts distributor located in Oldenburg, Germany. With the trademarks VAICO and VEMO are the service market leaders in more than 125 countries worldwide. As an internationally present automotive supplier, VIEROL AG specializes in electronic and electrical components for German and European vehicles. VIEROL AG quality brands VEMO and VAICO combine innovation and experience, technical expertise and practiced corporate values, commitment to precision and a passion for technology: the invisible, but unquestionable, optimal prerequisites for guaranteed product quality and globally recognized service. Choosing from the comprehensive VIEROL product range means opting for outstanding quality. Screw with washer. 4.8 x 16 MM
See More

KAI – New Standard Replacement Driver Side Grille (Part No.BM1200113)

New Standard Replacement Driver Side Grille

from

$17.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Driver Side Grille. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

MTC – Glove Box Latch (Part No.O600820875MTC)

Glove Box Latch

from

$80.91
MTC develops and manufactures high quality OE specified polyurethane mounts, bushings and undercar components to the spare parts industry.
See More

Original Equipment – Emblem Retainer (Part No.O5019319717OEA)

Emblem Retainer

from

$1.30
Emblem Retainer

KAI – Door Mirror Glass (Part No.BM1323106)

Door Mirror Glass

from

$41.99
New Standard Replacement Driver Side Replacement Mirror Glass, 3 5/8 X 6 1/16 X 6 5/16

Product Features:
  • 3 5/8 X 6 1/16 X 6 5/16, Flat Glass
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

MTC – Window Switch (Part No.O306021145MTC)

Window Switch

from

$47.56
MTC develops and manufactures high quality OE specified polyurethane mounts, bushings and undercar components to the spare parts industry.
See More

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77002)

Windflector - Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc

from

$59.99
AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:
  • The Windflector greatly reduces sunroof wind noise and air turbulence
  • Prevents the rain from entering the sunroof opening while driving
  • Helps reduce heat buildup inside the vehicle
  • Available in 5 different sizes for perfect fit
  • No drill installation
  • Installs quickly and easily with 3M automotive-grade adhesive
See More

APA/URO Parts – Bumper Trim (Part No.O108080411APA)

Bumper Trim

from

$28.61
Bumper Trim

MTC – Automatic Transmission Selector Handle (Part No.J401038804MTC)

Automatic Transmission Selector Handle

from

$27.07
Automatic Transmission Selector Handle

BMW 318i Transmission Parts

National – Bearings (Part No.LM501310)

Bearings

from

$9.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Carquest – Air Charge Temperature Sensor Connector (Part No.28419A)

Air Charge Temperature Sensor Connector

from

$18.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
  • Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
  • Thermoplastic housing withstands heat stress for enhanced durability
  • Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
  • External core made from oriented silicon steel ensures durability and longevity
See More

B & M – Manual Shifter, Precision Shifter, BMW E36, E46, and E39 (Part No.45126)

Manual Shifter, Precision Shifter, BMW E36, E46, and E39

from

$349.99
This B&M Precision Sport Shifter for B&MW 3and5 series cars packs a 20% to 25% reduction in throw for the ultimate in smooth short shifter technology. Two piece 416 Stainless Steel and Aluminum Stick assemblies, counter balanced for reduced effort.

Product Features:
  • Shortens Shifter Throw
  • CNC Machined-303 Stainless Steel
  • 6061-T6 Aluminum
  • Two Piece 416 Stainless Steel/Aluminum Stick Assembly
  • Bearing Assembly In Aluminum Housing
See More

Driveworks – Auto Transmission Shift Shaft Seal (Part No.S-8792S)

Auto Transmission Shift Shaft Seal

from

$2.49
Product Features:
  • Brand may vary by location
See More

National – Multi Purpose Seal (Part No.6712NA)

Multi Purpose Seal

from

$10.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

FAE – Backup Light Switch (Part No.P300618460FAE)

Backup Light Switch

from

$25.54
The FAE aftermarket Backup Light Switch is the ideal high quality replacement for your vehicle. The backup Light Switch activates your reverse lights when your vehicle is in reverse. This aftermarket replacement backup light switch is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Anchor – Transmission Mount: Right, Left, Rear, 1 Piece (Part No.9096)

Transmission Mount: Right, Left, Rear, 1 Piece

from

$27.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BMW 88-19;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 1988-2019
  • Weight approx: 1 Lbs
See More

CRP – MT Shift Fork Shaft (Part No.J111577477CRP)

MT Shift Fork Shaft

from

$2.02
MT Shift Fork Shaft

ATP – AT SPEED PINION SEAL (Part No.SO-34)

AT SPEED PINION SEAL

from

$5.99
AT SPEED PINION SEAL

ATP – Shift Solenoid (Part No.EE-5)

Shift Solenoid

from

$129.99
Shift Solenoid

ATP – AT MASTER REPAIR KIT (Part No.NM-6)

AT MASTER REPAIR KIT

from

$475.99
AT MASTER REPAIR KIT

National – Multi Purpose Seal (Part No.224010)

Multi Purpose Seal

from

$4.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Rein – Aluminum Bolt (Part No.HWB0001)

Aluminum Bolt

from

$9.99
Rein OE quality bolts kits fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for the original bolts are identical to OEM. Supplied with all the necessary bolts and torque specs to ensure that the job is done right.

Product Features:
  • Made of high quality materials.
  • Comes with torque specs to make sure each bolt is properly tighten
  • Manufactured to strict engineering standards/specifications.
  • Aluminum bolts are torque to yield and must be replaced once they are released.
See More

Corteco – Automatic Transmission Seal, Input Shaft (Part No.J507077428CFW)

Automatic Transmission Seal, Input Shaft

from

$40.26
Automatic Transmission Seal, Input Shaft

FAG US – BEARING (Part No.6305)

BEARING

from

$24.49
BEARING

Corteco – AT Pump Seal (Part No.J5073287448CFW)

AT Pump Seal

from

$11.27
AT Pump Seal

Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ

from

$16.99
Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 90 minutes
See More

ACM – Automatic Transmission Oil Cooler (Part No.J204076020ACM)

Automatic Transmission Oil Cooler

from

$187.32
ACM is a supplier of Original Equipment quality climate control products.
See More

Corteco – Selector Shaft Seal (Part No.J5087327206CFW)

Selector Shaft Seal

from

$8.56
Selector Shaft Seal

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18756)

Transmission Oil Pan Gasket

from

$22.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Driveworks – Oil Seal (Part No.S-3459)

Oil Seal

from

$7.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Rein – Bushing (Part No.AVB0485)

Bushing

from

$7.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:
  • All Rein Automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
  • Recommend to replace bushings in pairs to ensure best performance. note: control arm bushing kits contain the needed pair.
See More

ATP – AT FRT PUMP BUSHING (Part No.CB-4)

AT FRT PUMP BUSHING

from

$10.99
AT FRT PUMP BUSHING

MTC – Shifter Boot (Part No.J107518678MTC)

Shifter Boot

from

$17.43
MTC develops and manufactures high quality OE specified polyurethane mounts, bushings and undercar components to the spare parts industry.
See More

BMW 318i Clutch Systems

Febi – Clutch Master Cylinder (Part No.I300018311FEB)

Clutch Master Cylinder

from

$96.00
The Febi Clutch Master Cylinder is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Sachs – Clutch Disc (Part No.I2010277506SAC)

Clutch Disc

from

$210.61
The Sachs Clutch Disc is manufactured in accordance to strict OEM specifications for performance and durability. Sachs manufactures clutches for many leading European automakers and guarantees the same high quality in its aftermarket clutch kits.

Product Features:
  • OE Quality and direct fit application.
  • Original Equipment Supplier
See More

Original Equipment – Flywheel Bolt (Part No.I1005248192OEA)

Flywheel Bolt

from

$7.52
The Original Equipment Flywheel Bolt is manufactured in accordance to strict OEM specifications for performance and durability. The Original Equipment flywheel bolt is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE Quality and direct fit application
  • Original Equipment Supplier
See More

LuK – Clutch Slave Cylinder (Part No.LSC107)

Clutch Slave Cylinder

from

$82.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

LuK – Clutch Slave Cylinder (Part No.LSC360)

Clutch Slave Cylinder

from

$128.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

LUK – RepSet OE Replacement Clutch Kit (Part No.I2030104004LUK)

RepSet OE Replacement Clutch Kit

from

$348.25
Schaeffler is an OE clutch supplier to nearly all vehicle manufacturers around the world and has always offered a model-specific LuK RepSet to the Aftermarket for professional repair. For complete clutch replacement, you need a clutch disc, pressure plate and release bearings. The LuK RepSet contains these components and they are precision-tuned to function perfectly together. Professional repair can be conducted quickly and trouble-free. Each LuK RepSet includes a premium-quality, clutch pressure plate and disc assembly, a release bearing, and pilot bearing when required.

Product Features:
  • Original Equipment Replacement.
  • Direct fit application.
  • OEM quality friction plates and steels.
  • Clutch kit includes; Disc, Pressure Plate, Release Bearing, and Pilot Bearing when required.
See More

Valeo – Dual Mass to Solid Flywheel Clutch Conversion Kit (Part No.I1001294907VAL)

Dual Mass to Solid Flywheel Clutch Conversion Kit

from

$911.58
Converts Dual Mass Clutch to a Solid Flywheel type Clutch Assembly – Includes Flywheel. All the components necessary for the first time conversion. Valeo solid flywheel conversion kits are designed to replace standard fit dual mass flywheels by using a long travel damper system in the clutch friction plate. Valeo solution to replace the Dual Mass Flywheel Original Equipment ( ) This clutch plate replicates the movement and damping characteristics of a dual mass flywheel meaning driver comfort is not affected. If a standard clutch friction plate is used with a solid flywheel conversion, the damping effect of the dual mass flywheel is removed so could possibly cause damage to the engine or gearbox. Valeo conversion kits DO NOT use standard clutch friction plates. Contained in the conversion kit is a clutch plate that has been specially and specifically designed and tested for the application it is listed for.

Product Features:
  • Full engine and gear box protection
  • Noise and Vibration Dampening
  • Excellent driver comfort
  • Increased reliability and durability
  • Increased clutch life (no wearing parts in the flywheel)
  • Better thermal resistance
  • Increased capacity for torque transmission
See More

MTC – Clutch Release Arm (Part No.I400118305MTC)

Clutch Release Arm

from

$25.04
The MTC Clutch Release Arm is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

APA/URO Parts – Clutch Pivot Pin (Part No.I20402392017APA)

Clutch Pivot Pin

from

$10.17
Clutch Pivot Pin

AGA Tools – Clutch Pivot Pin (Part No.I20402267265AGA)

Clutch Pivot Pin

from

$67.00
Clutch Pivot Pin

Sachs – Super Set Clutch Kit (Part No.I2030132102SAC)

Super Set Clutch Kit

from

$247.20
As an OE clutch, clutch system and component supplier, Sachs products are developed to meet the highest demands of the worlds’s leading car manufacturers. With a complete program to satisfy a one-stop-shop need for complete clutch system replacement parts, unsurpassed quality and unmatched Asian, Domestic and European coverage, SACHS brand confirms itself as the premier OE clutch product available to the aftermarket. In order to reduce installation time, SACHS Super Set Clutch Kits come with everything needed for installations. All kits included in the catalog have also been tested to meet or exceed OE specifications and cycle tested in order to reduce returns.

Product Features:
  • OE Quality and direct fit application.
  • Original Equipment Supplier
  • Clutch kit contains; disc, pressure plate, release bearing and pilot bearing when required.
  • Most complete clutch kit line offering in the industry
  • Unmatched Asian, Domestic and European coverage
  • Exclusive parts not available through other suppliers
  • Complete range of complimentary parts and upgrades
See More

Sachs – Clutch Release Bearing (Part No.I2020170377SAC)

Clutch Release Bearing

from

$46.20
The Sachs release bearing (also known as a throw-out bearing) is original equipment quality and maintains the equivalent fit and performance as the OE part it replaces. Sachs clutch release bearings offer the conventional alignment function in a lightweight, compact body.

Product Features:
  • Extended service life
  • Compact, lightweight design
  • Sealed for life with high performance, application-specific grease
  • Simplified assembly
  • Integrated functionality
  • Design flexibility
See More

FAG – Release Bearing (Part No.I2020170377FAG)

Release Bearing

from

$117.76
Release Bearing

MTC – Release Arm Spring (Part No.I4008285958MTC)

Release Arm Spring

from

$4.96
Release Arm Spring

Carquest Wearever – Clutch Hydraulic Hose (Part No.BHA621828)

Clutch Hydraulic Hose

from

$18.29
Leaky or cracked hydraulic hose? This replacement hose is precision-engineered to match the original clutch hoses on specific vehicles as part of a complete, reliable clutch repair job.

Product Features:
  • Direct replacement – this clutch hose is made to match the original hose on specific vehicles
  • Thoroughly tested – validated to 4,000 PSI tolerance to ensure product safety standards
  • Durable construction – made of high-grade materials designed for optimal chemical and thermal resistance
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Dorman – Clutch Pilot Bearing (sold by each) (Part No.690-047)

Clutch Pilot Bearing (sold by each)

from

$33.49
This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles.
  • Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Clutch Pilot Bearing (sold by each) (Part No.690-046)

Clutch Pilot Bearing (sold by each)

from

$28.99
This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles.
  • Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Nachi – Pilot Bearing (Part No.I1010132692NAC)

Pilot Bearing

from

$8.68
The Nachi pilot bearing is manufactured in accordance to strict OEM specifications for performance and durability.

Product Features:
  • OEM supplier of clutch pilot bearings for Acura and Honda
  • Adopted original seal design to prevent contamination and grease leakage
  • Contains special grease for wider temperature ranges and longer life
  • Smooth and quiet operation
  • Lower rotating torque by improving seal lips
  • Compact design for lightweight to achieve high performance
See More

INA – Pilot Bearing (Part No.I101044685INA)

Pilot Bearing

from

$9.64
The INA pilot bearing is manufactured in accordance to strict OEM specifications for performance and durability.

Product Features:
  • OE Quality and direct fit application
  • Original Equipment Supplier
  • Sealed for life with high performance, application-specific grease
  • High axial load carrying capacity
See More

Dorman – Clutch Pilot Bearing (Part No.690-046.1)

Clutch Pilot Bearing

from

$20.99
This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles.
  • Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

LuK – OE Quality Dual Mass Flywheel (Part No.DMF017)

OE Quality Dual Mass Flywheel

from

$596.99
LuK: Don’t gamble – stay with the original DMF! The DMF prevents damages solid flywheels may cause. The Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
See More

LUK – Dual Mass Flywheel (DMF) (Part No.I1000835613LUK)

Dual Mass Flywheel (DMF)

from

$732.39
LuK dual-mass flywheels absorb engine vibrations before they are transmitted to the driveline where they can create gear rattle. These units feature a built-in damper designed to isolate engine torque spikes and prevent transmission damage. By design, dual-mass flywheels cannot be resurfaced. This all makes the LuK dual mass flywheel the ideal solution. With one drawback: the higher the mass reactance of the vibrating masses, the more excessive the resonance increase and associated torque peaks. With the dual mass flywheel, this would be easily perceived when starting and stopping the engine; much more easily than with a conventional clutch system. Additionally: the smaller flymass of the engine has less of a stabilizing effect on the speed fluctuation of the engine. Thanks to decades of experience in clutch building, the LuK specialists were able to find an excellent solution to this problem. An additional damping device effectively prevents resonance overload. In normal operation, however, this additional damping device has no function and the torsional vibrations of the engine are filtered out by spring dampers. Friction and spring rate – the correct ratio is important. For optimal vibration isolation and soft resonance passage when starting and stopping the engine, the ratio between friction and spring rate must be optimal. The length of the springs is a key factor: The softer a spring, the more efficiently vibrations are isolated. The extra-long springs of the latest generation of dual mass flywheels significantly reduce the spring rate compared to a first generation dual mass flywheel. In routine driving operations, excessive resonance increases are kept almost completely away from the gearbox.

Product Features:
  • Top driving comfort
  • Absorbs vibrations
  • Prevents noise
  • Enables comfortable, low-revs driving
  • Saves fuel
  • Relieves crankshaft and gearbox
See More

BMW 318i Automotive Accessories

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 35.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77003)

Windflector - Classic, Window, Fits Up To 35.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc

from

$59.99
AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:
  • The Windflector greatly reduces sunroof wind noise and air turbulence
  • Prevents the rain from entering the sunroof opening while driving
  • Helps reduce heat buildup inside the vehicle
  • Available in 5 different sizes for perfect fit
  • No drill installation
  • Installs quickly and easily with 3M automotive-grade adhesive
See More

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 33.0" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77001)

Windflector - Classic, Window, Fits Up To 33.0" Wide Sunroofs, Smoke, Outside Mount, 1 Pc

from

$59.99
AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:
  • The Windflector greatly reduces sunroof wind noise and air turbulence
  • Prevents the rain from entering the sunroof opening while driving
  • Helps reduce heat buildup inside the vehicle
  • Available in 5 different sizes for perfect fit
  • No drill installation
  • Installs quickly and easily with 3M automotive-grade adhesive
See More

MTC – License Plate Base (Part No.O109020876MTC)

License Plate Base

from

$46.47
MTC develops and manufactures high quality OE specified polyurethane mounts, bushings and undercar components to the spare parts industry.
See More

APA/URO Parts – Cup Holder (Part No.O6035392577APA)

Cup Holder

from

$38.01
Cup Holder

HIGHLAND – All Weather Floor Mats, Black (Part No.4603100)

All Weather Floor Mats, Black

from

$41.49
HIGHLAND all weather floor mats offer the ultimate protection for front and rear floors. These durable, pliable floor mats will not stiffen or crack even in the harshest of weather conditions. Protect your investment and increase your resale value with these high quality floor mats.

Product Features:
  • Easily installed and removed – no tools required
  • Designed to fit your specific vehicle contours
  • Raised ridges confines dirt and water to keep your vehicles carpet clean
  • Anti-skid spikes on back of mats prevent the mat from slipping
See More

WeatherTech – Cut-To-Fit, Deeply Sculpted Channels, Black, Tpe, 2 Piece (Part No.W50)

Cut-To-Fit, Deeply Sculpted Channels, Black, Tpe, 2 Piece

from

$65.99
The WeatherTech All Weather Floor Mats have deeply sculpted channels designed to trap water, road salt, mud and sand. Our proprietary engineered odorless resin ensures that these mats will not curl, crack or harden in sub zero weather. Our All Weather Floor Mats also have anti skid ridges to prevent shifting in your vehicle and come with a protective, non stick finish to make cleanup quick and easy. WeatherTech All Weather Floor Mats are manufactured in America to ISO 9001 standards, and also meet FMVSS302 standards your assurance of quality. Choose from Black, Tan or Grey to complement virtually any interior color. Available for cars, trucks, minivans and SUVs. All Weather Floor Mats were intended to give the best possible protection for your vehicle floor.

Product Features:
  • Made From An Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound That Is An OEM Approved
  • Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable
  • Anti Skid Ridges To Prevent Shifting In Your Vehicle And Come With A Protective, Non Stick Finish To Make Cleanup Quick And Easy
  • To Prevent Shifting, The All-Weather Floor Mats Features Anti-Skid Ridges On The Underside Of The Mat
  • Manufactured In America To ISO 9001 Standards, And Also Meet FMVSS302 Standards-Your Assurance Of Quality
See More

WeatherTech – Floor Mats: Gray, Rubber, W/ Deep Channels, All Weather, 2 Pk (Part No.W50GR)

Floor Mats: Gray, Rubber, W/ Deep Channels, All Weather, 2 Pk

from

$71.99
The WeatherTech All-Weather Floor Mats have deeply sculpted channels designed to trap water, road salt, mud and sand. Our proprietary engineered odorless resin ensures that these mats will not curl, crack or harden in sub-zero weather. Our All-Weather Floor Mats also have anti-skid ridges to prevent shifting in your vehicle and come with a protective, non-stick finish to make cleanup quick and easy. WeatherTech All-Weather Floor Mats are manufactured in America to ISO 9001 standards, and also meet FMVSS302 standards – your assurance of quality. Choose from Black, Tan or Grey to complement virtually any interior color. Available for cars, trucks, minivans and SUVs. All-Weather Floor Mats were intended to give the best possible protection for your vehicle floor.

Product Features:
  • Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand
  • They Won’t Curl, Crack Or Harden In Sub-Zero Weather
  • Anti-Skid Ridges To Prevent Shifting In Your Vehicle And Come With A Protective, Non-Stick Finish To Make Cleanup Quick And Easy
  • All-Weather Floor Mats Were Intended To Give The Best Possible Protection For Your Vehicle Floor
See More

Kat’s – Freeze Plug Heater (Part No.11430)

Freeze Plug Heater

from

$55.99
Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:
  • Saves wear and tear on your engine
  • Simple installation directly into engine block
See More

Kat’s – Freeze Plug Heater (Part No.11403)

Freeze Plug Heater

from

$42.99
Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:
  • Saves wear and tear on your engine
  • Simple installation directly into engine block
See More

Kat’s – Circulation Tank Heater; Thermostatically Controlled (Part No.13080)

Circulation Tank Heater; Thermostatically Controlled

from

$84.99
Circulation Tank Heater is Available in 850W, 1000W, 1500W, and 2000W, 120V and 240V. This heater is thermostatically controlled 135 degrees-175 degrees. Moderate mechanical ability is required for installation. Uses versatile strap type mounting.

Product Features:
  • Available for all size engines
  • Equipped with check valve
  • Fits most liquid cooled engines
  • Installations easier and simpler
  • New lower radiator hose connectors
See More

Budge – Ultra Car Cover, Moderate Outdoor Protection for Cars, Fits up to 200 in. (Part No.D-3)

Ultra Car Cover, Moderate Outdoor Protection for Cars, Fits up to 200 in.

from

$86.99
The Budge Ultra Car Cover offers protection against dust, debris, tree sap and other environmental pollutants. This lightweight vehicle cover is comprised of 3 layers of polypropylene. Our Ultra car covers are fully breathable, with ultra-sonically welded seams for added durability. This soft, nonabrasive material will not harm the surface of your vehicle. Designed for indoor and outdoor use, the Ultra Car Cover is designed to be breathable while it protects your vehicle. This improves airflow to reduce condensation and helps prevent mold and mildew. The Ultra cover features a full elastic hem and built-in grommets. This cover is gray in color and includes a storage bag and antenna patch. Designed to fit, this car cover fits cars 200″ L x 60″ W x 51″ H.

Product Features:
  • This car cover fits cars up to 200″ L x 60″ W x 51″ H.
  • This car cover is made from a 3 layer, UV resistant material that will protected your vehicle’s paint from fading
  • This car cover is water resistant and features ultrasonically welded seams for extra durability
  • Cover is suitable for short term outdoor protection and long-term indoor protection
  • Elasticized hem and sewn-in grommets for a secure fit
See More

Covercraft – Custom Fit Car Covers Polycotton Gray (Part No.C9322PD)

Custom Fit Car Covers Polycotton Gray

from

$231.99
Covercraft’s custom fit Polycotton Car Cover provides good basic indoor protection for your vehicle. A good choice for a budget conscience shopper looking for basic coverage and protection. Constructed from drill weave Polycotton blend materials. Fabric is soft and durable to protect your paint finish. Polyester material is sun and water resistant. Comes in gray.

Product Features:
  • Good basic indoor protection
  • Drill weave Polycotton blend
  • Resists tears and punctures
  • Treated to resist rot and mildew
See More

Covercraft – Custom Fit Car Covers Sunbrella Toast (Part No.C13273D6)

Custom Fit Car Covers Sunbrella Toast

from

$661.99
Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:
  • Best for intense sun locations
  • Durable long-lasting fabric
  • Solution dyed woven acrylic fabric
  • Provides almost complete UV blockage
See More

Rightline Gear – Range Jr Car Top Carrier (Part No.100R50)

Range Jr Car Top Carrier

from

$89.99
The Range Jr Car Top Carrier is weatherproof + and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. Use the Range Carrier on your next family vacation, backwoods expedition, shopping spree, or move.

Product Features:
  • Dimensions: 36″ L x 32″ W x 15″ H
  • Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
  • Weatherproof + with welded seams and a urethane coated zipper
  • Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
See More

Rightline Gear – Sport Jr. Car Top Carrier (Part No.100S50)

Sport Jr. Car Top Carrier

from

$109.99
The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:
  • Capacity: 10 cu ft
  • Dimensions: 36″ L x 30″ W x 16″ H
  • Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
  • 100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
  • Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
  • Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
See More

WeatherTech – Removable Roll Up/ With Velcro Strip For Storage, Silver/Black Reversible (Part No.TS1295)

Removable Roll Up/ With Velcro Strip For Storage, Silver/Black Reversible

from

$85.99
Sunshade is a custom fit windshield and window sun shade that protects the vehicle interior from harmful UV rays. Its clever design helps keep interior temperatures cool in the summer or flip it around and help prevent frost build-up in the winter.

Product Features:
  • Dual Purpose Design: Helps Keep Vehicles Cool In The Summer, And In The Winter Also Helps Warm Up Interiors And Avert Frost Build-Up
  • Cools In Summer, Significantly Reduces The Temperature Of The Vehicle Dashboard And Steering Wheel
  • Heats In Winter, Helps To Attract The Sunlight, Warm Up The Vehicle Windshield And Interior And Avert Frost Build Up
  • Effortless Storage Can Easily Be Rolled Up And Stored With The Help Of Its Hook And Loop Strap System
  • Sturdy Core Features A Foam Core, Which Makes For Easy Handling And A Sturdy Fit In Vehicle Windows And Windshields
  • Custom Fit Custom Fit For The Vehicle, And When Properly Installed, Will Remain Snug In Each Window Opening
See More

Covercraft – UVS100 Custom Sunscreen – Silver (Part No.UV10023SV)

UVS100 Custom Sunscreen - Silver

from

$52.99
The Original Covercraft UVS100 Sunscreen has been a customer favorite for decades! These unique sun shades are made to fit your exact windshield specific to the Year, Make and Model of your vehicle. With a perfect fit to your windshield, you get maximum interior protection from harmful UV rays and damaging heat.  Unlike other flimsy sun shades, heat shields, or UV shields our Custom UVS100 Sunscreens use a thick foam core with a triple laminate construction and a soft felt backing. This means that you get superior insulation that reflects and absorbs heat to dramatically reduce the interior vehicle temperatures.  The unique design of our Custom Sunscreens allows them to be easily folded up when not in use perfect for compact storage. This makes it easy to fold up and stow behind your seat without fear of it getting stepped on. Our Original UVS100 is available in 5 colors to give your vehicle a unique look.  Keep your interior looking like new, prevent fading and cracking, and reduce the heat build-up in your vehicle with the Best-Fitting Custom Sunscreen.

Product Features:
  • Custom fit to the windshield for complete coverage
  • Protect the dash and other interior components from damage by the sun
  • Reduce the interior temperature of the vehicle on hot days
  • The foam core center of the shield acts as an insulator
  • Easy to use and store away when not in use
See More

Covercraft – UVS100 Custom Sunscreen – Blue Metallic (Part No.UV10023BL)

UVS100 Custom Sunscreen - Blue Metallic

from

$117.99
The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.

Product Features:
  • Custom fit to the windshield for complete coverage
  • Protect the dash and other interior components from damage by the sun
  • Reduce the interior temperature of the vehicle on hot days
  • The foam core center of the shield acts as an insulator
  • Easy to use and store away when not in use
See More

Rightline Gear – Car Top Duffle Bag (Part No.100D90)

Car Top Duffle Bag

from

$99.99
The Rightline Gear Car Top Duffle Bag is a 100% waterproof gear bag that you can pack, strap to the roof of your vehicle, transport, and then carry wherever you need to go. Attach (1) to (4) Duffle Bags to vehicles WITH or WITHOUT a roof rack. Each bag comes with a removable shoulder strap that can be stored in the bag’s zippered side pocket when not in use. The bag is made from tough PVC Coated Mesh that is re-enforced for strength and UV protected. The Car Top Duffle Bag defines travelling efficiency!

Product Features:
  • Capacity: 4.3 cu ft
  • Dimensions: 36″ L x 16″ W x 13″ H
  • 100% Waterproof with welded seams, urethane coated zippers, and a hook-&-loop-close zipper cover
  • Designed to be used on any size vehicle, WITH or WITHOUT a roof rack
  • Includes: bag, shoulder strap, (2) attachment straps, (4) Car Clips, and set up guide
  • Includes: duffle bag, (2) nylon straps, (4) Car Clips, and complete set up guide
See More

BMW 318i Interior Products

APA/URO Parts – Door Lock Knob (Part No.O300794268APA)

Door Lock Knob

from

$2.60
Door Lock Knob

Sylvania – 2721 Long Life: Mini Bulb, Standard Performance, 2 Pack (Part No.2721LLBP2)

2721 Long Life: Mini Bulb, Standard Performance, 2 Pack

from

$6.99
SYLVANIA Long Life miniature bulbs provide standard performance for your car or truck’s interior and exterior auxiliary lighting. Ideal for use in your car’s back up/reverse, trunk, dome lights and more, Long Life bulbs are a direct replacement for your vehicle. Designed for durability, lower maintenance, and safety in mind.

Product Features:
  • DEPENDABLE: Made from high quality materials for long-lasting durability
  • EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
  • SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color
  • PRO TIP: When changing your bulb, never touch the glass. Always use gloves or a clean shop towel to reduce the transfer of oils during install
  • SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application
  • TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience
See More

Dorman – Door Trim Panel Retainer – 9.1 mm Hole (Part No.963-130D)

Door Trim Panel Retainer - 9.1 mm Hole

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Febi – Bilstein Clutch Pedal Pad (Part No.I501019867FEB)

Bilstein Clutch Pedal Pad

from

$6.22
The Febi-Bilstein Clutch Pedal Pad is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Dorman – Seat Gear Assembly (Part No.924-387)

Seat Gear Assembly

from

$23.29
Our Seat Adjustment Gears restore proper seat reclining and height adjustment functions to the driver and passenger side seats.

Product Features:
  • Made of high quality materials for durability.
  • Reduce Repair Cost – Replace just the failed gear, instead of the entire seat gear assembly.
  • Manufactured to strict quality standards
  • All Seat Adjustment Gears are color coded to easily determine the application
See More

APA/URO Parts – Accelerator Pedal (Part No.C70402216366APA)

Accelerator Pedal

from

$44.93
Accelerator Pedal

Odometer Gears Ltd. – Seat Gear, White (Part No.O6049436266OGL)

Seat Gear, White

from

$48.60
Seat Gear, White

Hella – 007424801 Twin Trumpet High/Low Tone 12V Horn Kit with Bracket (Part No.1E40082503HEL)

007424801 Twin Trumpet High/Low Tone 12V Horn Kit with Bracket

from

$66.59
The HELLA horns features increased corrosion protection, Teflon pill to protect against humidity and optimized sound funnel. Hella’s Twin-Trumpet horn kit is a great upgrade for any vehicle. The twin trumpets are self contained, there is no compressor to mount so this is a great choice where there are space constraints. Sound level is 110Db, Frequency 500Hz high tone, 400Hz low tone, Draws 6 amps each trumpet. Kit includes one high and one low tone trumpet unit, relay, mounting hardware and instructions.

Product Features:
  • Red Plastic Trumpet Horns with Bracket
  • Full harmonious and wide sound radiation
  • Strong sound
  • OE replacement for various applications
  • Stylish design Specifications :
  • Voltage: 12V
  • Low Tone Frequency: 400 Hz
  • High Tone Frequency: 500 Hz
  • Sound Level at 6.5ft (2 Meters): 110 dB
  • Power Consumption: 72W
  • Approval: ECE
  • Bracket: M8 mounting screw Kit Includes:
  • (1) High-Tone Trumpet Horn
  • (1) Low-Tone Trumpet Horn
  • (1) Relay
See More

TKU – Horn (Part No.P600017798TKU)

Horn

from

$25.38
Horn

Febi – Cruise Control Cut Out Switch (Part No.P501951984FEB)

Cruise Control Cut Out Switch

from

$26.76
Febi Bilstein stands for solutions “Made in Germany” and is one of the world’s leading manufacturers and suppliers of car and commercial vehicle spare parts in the spare parts market.

Product Features:
  • Original Febi Bilstein spare part
  • Easy assembly thanks to perfect fit
  • Certified original equipment quality: Febi Bilstein fulfills all approval requirements
  • High driving comfort thanks to the use of perfectly coordinated materials and an impeccable design
  • Efficiency: Long service life with high driving comfort
See More

Carquest Premium – Hazard Warning Switch (Part No.HDC1066)

Hazard Warning Switch

from

$86.99
The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
  • Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1879)

Multi Purpose Relay

from

$76.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dashmat – SuedeMat Dashboard Cover Faux-suede Material – Grey (Part No.80573-00-47)

SuedeMat Dashboard Cover Faux-suede Material - Grey

from

$112.99
SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:
  • The rich appearance and feel of suede-like fabric
  • Custom tailored for a precise, snug fit
  • Protects your dash from sun damage and reduces windshield glare
  • Vents, sensors and trays remain fully functional
  • Simple installation with hook and loop fasteners
See More

Dashmat – SuedeMat Dashboard Cover Faux-suede Material – Black (Part No.80987-01-25)

SuedeMat Dashboard Cover Faux-suede Material - Black

from

$112.99
SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:
  • The rich appearance and feel of suede-like fabric
  • Custom tailored for a precise, snug fit
  • Protects your dash from sun damage and reduces windshield glare
  • Vents, sensors and trays remain fully functional
  • Simple installation with hook and loop fasteners
See More

Dashmat – SuedeMat Dashboard Cover, Black (Part No.80573-00-25)

SuedeMat Dashboard Cover, Black

from

$112.99
SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:
  • The rich appearance and feel of suede-like fabric
  • Custom tailored for a precise, snug fit
  • Protects your dash from sun damage and reduces windshield glare
  • Vents, sensors and trays remain fully functional
  • Simple installation with hook and loop fasteners
See More

MTC – Shift Knob (Part No.J1091150191MTC)

Shift Knob

from

$31.14
MTC develops and manufactures high quality OE specified polyurethane mounts, bushings and undercar components to the spare parts industry.
See More

MTC – Shift Knob (Part No.J109118679MTC)

Shift Knob

from

$55.06
Shift Knob

AutoMeter – Gauge Mount; A-Pillar Pod; Dual; 2 1/16"; BMW 3 Series 92-98 (4Dr.) E36 (Part No.20200)

Gauge Mount; A-Pillar Pod; Dual; 2 1/16"; BMW 3 Series 92-98 (4Dr.) E36

from

$62.99
Product Features:
  • Optimally positions key performance data within driver’s field of vision
  • Professional fit and finish, this mounting solution attaches to the factory pillar effortlessly by utilizing the included mounting hardware
  • Black textured finish which can be painted to match your interior if desired
  • High quality, composite construction is incredibly durable and looks great
  • Seamlessly integrate AutoMeter 2-1/16″ gauges into your interior
  • 4 Door Sedan Only
See More

AutoMeter – Gauge Mount; A-Pillar Pod; Single; 2 1/16"; BMW 3 Series 92-98 (4Dr.) E36 (Part No.20201)

Gauge Mount; A-Pillar Pod; Single; 2 1/16"; BMW 3 Series 92-98 (4Dr.) E36

from

$49.99
Product Features:
  • Optimally positions key performance data within driver’s field of vision
  • Professional fit and finish, this mounting solution attaches to the factory pillar effortlessly by utilizing the included mounting hardware
  • Black textured finish which can be painted to match your interior if desired
  • High quality, composite construction is incredibly durable and looks great
  • Seamlessly integrate AutoMeter 2-1/16″ gauges into your interior
  • 4 Door Sedan Only
See More

AutoMeter – Gauge Mount; A-Pillar Pod; Dual; 2 1/16"; BMW 3 Series 92-98 (2Dr.) E36 (Part No.20202)

Gauge Mount; A-Pillar Pod; Dual; 2 1/16"; BMW 3 Series 92-98 (2Dr.) E36

from

$59.99
Product Features:
  • Optimally positions key performance data within driver’s field of vision
  • Professional fit and finish, this mounting solution attaches to the factory pillar effortlessly by utilizing the included mounting hardware
  • Black textured finish which can be painted to match your interior if desired
  • High quality, composite construction is incredibly durable and looks great
  • Seamlessly integrate AutoMeter 2-1/16″ gauges into your interior
  • 2 Door Coupe Only
See More

Programa – Instrument Circuit B (Part No.P400981690PRO)

Instrument Circuit B

from

$264.80
Instrument Circuit B

Search Over 1,995 BMW 318i Parts Online for Delivery or Pick Up

Looking for the best BMW 318i aftermarket replacement parts? Replacing worn and broken parts on your BMW 318i? Check out our online catalog to find the best selection of aftermarket BMW 318i parts as well as real user reviews on BMW 318i replacement parts. Make an informed decision about every component you add to your 318i.

At Advance Auto, we’ve got you covered when it comes to getting your BMW 318i in tip top condition. We’ve got over 1,995 BMW 318i parts to choose from in popular categories like Body Parts, Transmission Parts and Clutch Systems. If you’re looking for the best prices, try searching our BMW 318i parts catalog to compare OEM and aftermarket parts for your BMW 318i.

Whether you need BMW 318i body parts, interior components, or custom BMW 318i parts you can find them online at Advance Auto. Want to order your Automotive Accessories online? Or maybe you need your BMW Interior Products same day? No problem, you can pick up 318i parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used BMW 318i parts has never been easier.