1992 Acura Vigor Steering and Chassis Parts

Essential Steering and Chassis Parts for 1992 Acura Vigors

Tezuka – Sway Bar Link Bushing (Part No.L103155120TZK)

Sway Bar Link Bushing

from

$1.59
The Tezuka Sway Bar Link Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Dorman – Suspension Strut Rod Bushing Kit (Part No.533-620)

Suspension Strut Rod Bushing Kit

from

$38.99
This suspension strut rod bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Driveworks – Ball Joint (Part No.DW-K90490)

Ball Joint

from

$9.29
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Forged housing provides exceptional strength and durability
  • Oxidation film on the surface of the metal protects against corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK80356)

Control Arm and Ball Joint Assembly

from

$69.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

MOOG – Caster/Camber Shim (Part No.K100320)

Caster/Camber Shim

from

$5.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can solve excessive tire wear and steering issues
  • Part can help bring vehicle back to factory specification
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
  • Loose or worn chassis parts can lead to premature tire wear
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Beck/Arnley – Stabilizer End Link (Part No.101-5253)

Stabilizer End Link

from

$23.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Comes with necessary components and hardware for a complete installation
  • Hardware functionality matches original design requirements
  • Easy access wrench flat allows for the use of a socket for easy installation and removal
  • Application specific for this vehicle
See More

Dorman – Help – Power Steering Reservoir Cap (Part No.80983)

Power Steering Reservoir Cap

from

$8.99
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:
  • Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap.
  • Durable construction – made of quality materials for leak-free performance and a long service life
  • Cost-effective solution – offers original equipment quality at competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
See More

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-1766)

Remanufactured Rack and Pinion Assembly

from

$264.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:
  • Protective coating applied to each unit to extend the life of the unit (where applicable).
  • 100% performance testing to ensure perfect fit, function and reliable performance.
  • 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
  • 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
  • Valve housings have polished micro-finish sleeves for durability (where applicable).
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Beck/Arnley – Stabilizer Bushing Set (Part No.101-6481)

Stabilizer Bushing Set

from

$21.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Bushings are resistant to heat, wear, salt, road grime, and oils
  • Made from a high grade rubber compound
  • Quality construction for durability
  • Application specific for this vehicle
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K90193)

Stabilizer Bar Bushing Kit

from

$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Bushings engineered for long life and dependability
  • Replacement can reduce front end noise
  • Thermoplastic bushings are resistant to heat, wear, salt, road grime and oils
See More

Carquest Premium – Power Steering End Fittings, 16mm Male Inv. Flare x 3/8" Beaded Tube (Part No.34830)

Power Steering End Fittings, 16mm Male Inv. Flare x 3/8" Beaded Tube

from

$20.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:
  • Zinc coated tubes protect against rust and corrosion
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

Cardone – Remanufactured Power Steering Pump (Part No.21-5854)

Remanufactured Power Steering Pump

from

$159.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Powercraft – Pump Seal Kit (Part No.8637)

Pump Seal Kit

from

$32.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Delphi – Tie Rod End (Part No.M3010149300DEL)

Tie Rod End

from

$36.29
Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Product Features:
  • Delphi tie rods are fatigue tested to avoid failure
  • Delphi includes the necessary accessories for a complete job
  • Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
  • Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics
See More

Delphi – Tie Rod End (Part No.M3010149302DEL)

Tie Rod End

from

$36.29
Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Product Features:
  • Delphi tie rods are fatigue tested to avoid failure
  • Delphi includes the necessary accessories for a complete job
  • Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
  • Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics
See More

First Equipment Quality – FEQ Tie Rod End (Part No.M3010149302FEQ)

FEQ Tie Rod End

from

$46.21
FEQ tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. FEQ tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:
  • Original Equipment quality
  • Coated surface to prevent corrosion and rust
  • Fatigue tested for structural integrity
  • Precision made components for an ideal fit and function
  • Adjustable for proper alignment
  • Premium Polychloroprene rubber boots
See More

Corteco – Power Steering Seal (Part No.M2080325661CFW)

Power Steering Seal

from

$5.60
Power Steering Seal

EMPI – Steering Rack Boot Kit (Part No.M1030149295EMP)

Steering Rack Boot Kit

from

$32.55
Steering Rack Boot Kit

Beck/Arnley – Steering Rack Boot (Part No.103-2876)

Steering Rack Boot

from

$26.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot (this is not a split boot)
  • Includes boot and two clamps for complete installation.
  • Quality construction for durability
  • Application specific for this vehicle
See More

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

Cardone – Power Steering Filter (Part No.20-0012F)

Power Steering Filter

from

$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT1)

POWER STEERINGFILTER

from

$6.99
POWER STEERINGFILTER

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – New Power Steering Filter (Part No.20-0038F)

New Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element.
  • Patented built-in bypass that filters up to 190 micron particles.
  • Designed to extend the life of the steering system.
  • Sure-grip barb connections are included to ensure proper hose fitment.
See More

Upgrade your 1992 Acura Vigor with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 1992 Acura Vigor, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Acura or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Vigor functioning at its best. At Advance Auto Parts, we offer a wide selection of 52 Steering and Chassis Parts for the 1992 Acura Vigor, designed to meet your needs without breaking the bank. From Power Steering Part replacements to Tie Rods upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1992 Acura Vigor at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $1.59 to $264.99, with an average price of $51.76. Our 52 Steering and Chassis Parts in stock come from 18 trusted brands, so you’re sure to find the right part for your 1992 Acura Vigor without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1992 Acura Vigor, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Imperial Cardone, and more. Imperial Steering and Chassis Parts start at just $11.49 and boast an impressive 4 stars average rating from customers. With 558 customer reviews and counting, our 1992 Acura Vigor Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1992 Acura Vigor is always ready to roll. We’re committed to providing you with everything you need to keep your Vigor in top shape, all in one place. Start shopping confidently below for your 1992 Acura Vigor!

Best-Selling Power Steering Parts for 1992 Acura Vigors

Enhance the driving experience in your Acura with 20 quality Power Steering Part components, starting at $6.99.

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – Power Steering Filter (Part No.20-0012F)

Power Steering Filter

from

$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Carquest Premium – Power Steering End Fittings, 16mm Male Inv. Flare x 3/8" Beaded Tube (Part No.34830)

Power Steering End Fittings, 16mm Male Inv. Flare x 3/8" Beaded Tube

from

$20.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:
  • Zinc coated tubes protect against rust and corrosion
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Cardone – New Power Steering Filter (Part No.20-0038F)

New Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element.
  • Patented built-in bypass that filters up to 190 micron particles.
  • Designed to extend the life of the steering system.
  • Sure-grip barb connections are included to ensure proper hose fitment.
See More

Imperial – Power Steering Oil Cooler (Part No.241009)

Power Steering Oil Cooler

from

$28.49
Product Features:
  • Power steering oil cooler
  • 3/4″ x 2-1/2″ x 9″
  • For vehicles with 3/8″ I.D. power steering return hose
  • Removes destructive heat and prolongs power steering system life
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – Quick Connect Coupler (Part No.240250)

Quick Connect Coupler

from

$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:
  • Quick Connect coupler
  • Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
  • Simplifies transmission cooler installation
  • Allows for auxiliary transmission cooler installation without cutting OE lines
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-1766)

Remanufactured Rack and Pinion Assembly

from

$264.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:
  • Protective coating applied to each unit to extend the life of the unit (where applicable).
  • 100% performance testing to ensure perfect fit, function and reliable performance.
  • 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
  • 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
  • Valve housings have polished micro-finish sleeves for durability (where applicable).
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Cardone – Remanufactured Power Steering Pump (Part No.21-5854)

Remanufactured Power Steering Pump

from

$159.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Powercraft – Pump Seal Kit (Part No.8637)

Pump Seal Kit

from

$32.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

EMPI – Steering Rack Boot Kit (Part No.M1030149295EMP)

Steering Rack Boot Kit

from

$32.55
Steering Rack Boot Kit

BBB Industries – Power Steering Filter (Part No.991-FLT4)

Power Steering Filter

from

$28.99
All Steering Power Filter
See More

BBB Industries – Power Steering Filter (Part No.991-FLT2)

Power Steering Filter

from

$28.99
All Steering Power Filter
See More

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)

POWER STEERINGFILTER

from

$28.99
POWER STEERINGFILTER

Beck/Arnley – Steering Rack Boot (Part No.103-2876)

Steering Rack Boot

from

$26.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot (this is not a split boot)
  • Includes boot and two clamps for complete installation.
  • Quality construction for durability
  • Application specific for this vehicle
See More

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT1)

POWER STEERINGFILTER

from

$6.99
POWER STEERINGFILTER

Most Popular 1992 Acura Vigor Tie Rods

Customize your Acura with 5 Tie Rods products like Tie Rod Ends, all priced under $92.99.

Rare Parts – Tie Rod End (Part No.RP29438)

Tie Rod End

from

$92.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Rare Parts – Tie Rod End (Part No.RP29440)

Tie Rod End

from

$60.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

First Equipment Quality – FEQ Tie Rod End (Part No.M3010149302FEQ)

FEQ Tie Rod End

from

$46.21
FEQ tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. FEQ tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:
  • Original Equipment quality
  • Coated surface to prevent corrosion and rust
  • Fatigue tested for structural integrity
  • Precision made components for an ideal fit and function
  • Adjustable for proper alignment
  • Premium Polychloroprene rubber boots
See More

Delphi – Tie Rod End (Part No.M3010149302DEL)

Tie Rod End

from

$36.29
Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Product Features:
  • Delphi tie rods are fatigue tested to avoid failure
  • Delphi includes the necessary accessories for a complete job
  • Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
  • Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics
See More

Delphi – Tie Rod End (Part No.M3010149300DEL)

Tie Rod End

from

$36.29
Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Product Features:
  • Delphi tie rods are fatigue tested to avoid failure
  • Delphi includes the necessary accessories for a complete job
  • Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
  • Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics
See More

Top Picks for 1992 Acura Vigor Steering Shafts

Upgrade Acura Vigors with top-quality Steering Shafts parts, including 1 OEM and aftermarket selections for your 1992 model.

Corteco – Power Steering Seal (Part No.M2080325661CFW)

Power Steering Seal

from

$5.60
Power Steering Seal

In-Demand Sway Bars for 1992 Acura Vigors

Select from 8 premium Sway Bars parts for your 1992 Acura Vigor, with prices ranging from $1.59 to $40.99.

MOOG – Stabilizer Bar Bushing Kit (Part No.K90563)

Stabilizer Bar Bushing Kit

from

$18.49
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K90193)

Stabilizer Bar Bushing Kit

from

$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Bushings engineered for long life and dependability
  • Replacement can reduce front end noise
  • Thermoplastic bushings are resistant to heat, wear, salt, road grime and oils
See More

Rare Parts – Sway Bar Link (Part No.RP22989)

Sway Bar Link

from

$40.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Beck/Arnley – Stabilizer End Link (Part No.101-5253)

Stabilizer End Link

from

$23.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Comes with necessary components and hardware for a complete installation
  • Hardware functionality matches original design requirements
  • Easy access wrench flat allows for the use of a socket for easy installation and removal
  • Application specific for this vehicle
See More

Beck/Arnley – Stabilizer Bushing Set (Part No.101-6481)

Stabilizer Bushing Set

from

$21.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Bushings are resistant to heat, wear, salt, road grime, and oils
  • Made from a high grade rubber compound
  • Quality construction for durability
  • Application specific for this vehicle
See More

TRW – Sway Bar Bushing Kit (Part No.L1049463652TRW)

Sway Bar Bushing Kit

from

$19.85
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that TRW parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Sway Bar Bushing is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce vibration and absorb noise.
See More

CTR – Sway Bar Link Bushin (Part No.L1031141440CTR)

Sway Bar Link Bushin

from

$3.34
Sway Bar Link Bushin

Tezuka – Sway Bar Link Bushing (Part No.L103155120TZK)

Sway Bar Link Bushing

from

$1.59
The Tezuka Sway Bar Link Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Most Sold 1992 Acura Vigor Ball Joints

Explore our best-selling Acura parts for the 1992 Vigor among 12 OEM and aftermarket options starting from $9.29.

Driveworks – Ball Joint (Part No.DW-K90490)

Ball Joint

from

$9.29
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Forged housing provides exceptional strength and durability
  • Oxidation film on the surface of the metal protects against corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
See More

Dorman – Suspension Control Arm (Part No.520-629)

Suspension Control Arm

from

$65.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Dorman – Suspension Control Arm (Part No.520-630)

Suspension Control Arm

from

$65.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK80357)

Control Arm and Ball Joint Assembly

from

$69.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK80356)

Control Arm and Ball Joint Assembly

from

$69.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

Rare Parts – Ball Joint (Part No.RP71566)

Ball Joint

from

$234.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

Rare Parts – Conrol Arm W/Bj (Part No.RP11740)

Conrol Arm W/Bj

from

$152.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • With ball joint
  • Reduces vibration
  • With bushing
See More

Rare Parts – Conrol Arm W/Bj (Part No.RP11741)

Conrol Arm W/Bj

from

$152.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • With ball joint
  • Reduces vibration
  • With bushing
See More

Dorman – Suspension Control Arm (Part No.520-620)

Suspension Control Arm

from

$102.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Beck/Arnley – Control Arm with Ball Joint (Part No.102-4371)

Control Arm with Ball Joint

from

$90.99
Eliminate vibration and unusual tire wear. Corrects camber and caster, improving ride quality. Direct OEM replacement. Complete with ball joint and bushings.
See More

Beck/Arnley – Control Arm with Ball Joint (Part No.102-4374)

Control Arm with Ball Joint

from

$90.99
Eliminate vibration and unusual tire wear. Corrects camber and caster, improving ride quality. Direct OEM replacement. Complete with ball joint and bushings.
See More

CTR – Ball Joint (Part No.L20203309591CTR)

Ball Joint

from

$39.97
Ball Joint

Top-Rated Steering and Chassis Parts Brands For Your 1992 Acura Vigor

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1992 Acura Vigors. Below you’ll find some of our best rated Steering and Chassis Parts from Imperial and Cardone, and more. Steering and Chassis Parts from these brands that fit a 1992 Vigor start at just $11.49 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Imperial 1992 Acura Vigor Steering and Chassis Parts

When it comes to maintaining or upgrading your 1992 Acura Vigor, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Steering and Chassis Parts, specifically designed for the 1992 Acura Vigor. With over 5 Imperial brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49, with an average price of just $20.95. Plus, with over 211 customer reviews and an average rating of 4 stars, you can trust that our Imperial Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Mounting Kit System
from
$11.49

(27)

Mounting Kit System

“Perfect for my transmission cooler holds it very good in place”

Transmission Oil Cooler Hose
from
$32.49

(94)

Transmission Oil Cooler Hose

“its a hose what cam I say”

Power Steering Oil Cooler
from
$28.49

(83)

Power Steering Oil Cooler

“Installed and properly working”

Popular Cardone 1992 Acura Vigor Steering and Chassis Parts

Cardone auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 1992 Acura Vigor owner should feel confident when installing genuine Cardone parts in their vehicle. To ensure the best fit and performance for your 1992 Vigor, Advance Auto Parts carries a full inventory of 6 Cardone Steering and Chassis Parts. Plus you will be keeping your Acura in peak condition while saving money because prices on these Cardone Steering and Chassis Parts range from $31.99 to $264.99, plus, with more than 62 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

Remanufactured Power Steering Pump
from
$159.99
This product is not rated

Remanufactured Power Steering Pump

“”

Remanufactured Rack and Pinion Assembly
from
$264.99
This product is not rated

Remanufactured Rack and Pinion Assembly

“”

Power Steering Filter
from
$31.99
This product is not rated

Power Steering Filter

“”

FAQs for 1992 Acura Vigor Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 1992 Acura Vigors?

Out of 52 Steering and Chassis Parts that fit 1992 Acura Vigors, the following parts are the top sellers:

What’s the price range for 1992 Acura Vigor Steering and Chassis Parts?

Steering and Chassis Part prices for the 1992 Acura Vigor start at $1.59 and go up to $264.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 1992 Acura Vigor?

The average price for Steering and Chassis Parts for the 1992 Acura Vigor is $51.76. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Acura Vigor model years?

Yes, we currently carry Steering and Chassis Parts for 2 model years of Acura Vigors between 1993 and 1994. Steering and Chassis Parts are bought most frequently for the following model years: 1994 and 1993.

What are the cheapest Steering and Chassis Parts for my 1992 Acura Vigor?

The cheapest 1992 Acura Vigor Steering and Chassis Parts we carry in stock are:

What are the top-rated Steering and Chassis Parts that fit the 1992 Acura Vigor?

Out of 558 reviews by customers, our 1992 Acura Vigor Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 1992 Acura Vigor and their top-rated products:

What types of Steering and Chassis Parts do you sell for my 1992 Acura Vigor?

Can I get help with 1992 Acura Vigor Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Acura Steering and Chassis Parts and more.

What is your return policy for Acura Vigor Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Acura Vigor Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.