1992 Acura Vigor Cooling and Climate Controls

Name: High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
Brand: Permatex
SKU: 82195
Price: 26.99 USD
Rating: 5.0 (7 reviews)

Below you will find various in-demand Acura Cooling and Climate Controls, components and accessories for your 1992 Vigor. Advance Auto Parts has popular Vigor parts like Engine Cooling Parts Air Conditioning Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Vigor model years including 1993 1994 and more. Select a category of 1992 Acura Vigor Cooling and Climate Controls below and start saving instantly.

Popular 1992 Acura Vigor Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Radiators

Engine Cooling Fan Controllers

Engine Coolant Thermostat Housing Caps

Radiator Caps

AC Compressor Without Clutch

Coolant Temperature Sensors

AC Condenser Fan Motors

Engine Water Pump Inlet Pipe Gaskets

Coolant Reservoir Caps

Water Outlets

Engine Coolant Pipe O-Rings

AC Line O-Rings

Radiator Fan Control Relays

HVAC Automatic Temperature Control (ATC) Relays

Temperature Switch and Senders

Water Pump Gaskets

Expansion Valve and Orifice Tubes

Radiator Drain Plugs

AC Compressor Cut-Off Switches

AC Compressor Pressure Switches

Engine Cooling Fan Switches

Radiator Fan Switches

AC Compressor Relay Connectors

Radiator Cap Adapters

HVAC Control Panel Relays

Cooling System Crossover Line O-Ring

Essential Cooling and Climate Controls for 1992 Acura Vigors

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$33.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$173.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$28.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$33.49

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$26.99

DENSO+s First Time Fit relays are no different from the OE relays DENSO has manufactured for over 60 years + built to be quiet, efficient, and reliable. Designed and manufactured to outlast the closest competitor by a minimum of ten times more life cycles, DENSO+s First Time Fit Relays will most likely out last your car. Holding approximately 30,000 active patents worldwide – approximately 7,300 in the United States – DENSO is going all out to design groundbreaking systems and components tuned especially to consumers’ specifications – whether they are drivers, passengers, pedestrians or society as a whole.

from

$17.29

from

$99.99

Product Features:

Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$20.24

Dorman’s Engine Coolant Thermostat Housing has improved durability and resistance. It withstands the extreme changes in temperature that frequently cause housing to become brittle, crack and leak. Maintain the steady flow of coolant and lessen the chances of overheating.

Product Features:

Direct replacement for a proper fit every time
Hoses slide on for easy installation
High-quality plastic or metal construction
Includes all hardware necessary for a complete repair (where applicable)

from

$37.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$25.99

from

$12.85

The Sankei Switches radiator cap range has been developed to operate within original equipment manufacturer’s specifications. A faulty radiator cap can cause your car to boil-over at a lower temperature. Test or replace the coolant cap when servicing the cooling system.

Product Features:

Meets Original Equipment specifications.
Made from premium materials.
Designed to function on open cooling systems and overflow reservoir type systems.

from

$3.21

Water Pipe O-Ring

from

$2.19

Water Pipe O-Ring

from

$367.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$84.09

The Four Seasons® Cooling Fan Motor is designed for quiet operation and dependable performance. We understand proper cooling fan operation is essential to everything from vehicle drivability to A/C system performance. But not all Cooling Fan Motor’s are created equal. Why would anyone risk installing an inferior product? Therefore, we go above and beyond with research, validation and testing before we add any new part numbers. Every Four Seasons Cooling Fan Motor is designed and tested to provide years of dependable performance. We provide quality drop-in-replacement units that are designed to O.E specifications.

Product Features:

Out of box, drop in replacements
Factory style connectors
Factory mounts for easy install
Motors that meet or exceed factory performance
Exact fit
Reduced labor time
Higher customer satisfaction

from

$52.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$54.99

from

$13.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$19.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$16.99

This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings

from

$62.99

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160°F – 210°F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator

from

$89.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$21.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$57.42

Air Conditioning Pressure Switch

from

$7.29

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$94.99

Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan

Upgrade your 1992 Acura Vigor with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 1992 Acura Vigor, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Acura or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Vigor functioning at its best. At Advance Auto Parts, we offer a wide selection of 64 Cooling and Climate Controls for the 1992 Acura Vigor, designed to meet your needs without breaking the bank. From Engine Cooling Part replacements to Air Conditioning Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 1992 Acura Vigor at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $2.19 to $367.99, with an average price of $46.07. Our 64 Cooling and Climate Controls in stock come from 22 trusted brands, so you’re sure to find the right part for your 1992 Acura Vigor without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1992 Acura Vigor, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, Carquest Premium, Imperial, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. Carquest Premium and Imperial also bring quality to the table, with Cooling and Climate Controls available starting at $9.29, and at an average 4 stars rating. With 1,566 customer reviews and counting, our 1992 Acura Vigor Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1992 Acura Vigor is always ready to roll. We’re committed to providing you with everything you need to keep your Vigor in top shape, all in one place. Start shopping confidently below for your 1992 Acura Vigor!

Best-Selling Engine Cooling Parts for 1992 Acura Vigors

Enhance the driving experience in your Acura with 50 quality Engine Cooling Part components, starting at $2.19.

show more show less

from

$22.99

Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248°F
For use with Imperial electric fans
Probe installs into radiator fins

from

$26.99

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$27.49

This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.

Product Features:

Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$37.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
In manufacturing, we custom form the wax pellets for different temperature range specifications. All units are calibrated & tested to confirm switch actuation at their specified temperature
The switch is designed using a formed bimetallic contact arm. The bimetal contact movement is achieved using the different expansion rates of two metals fused together. This is a creep action device, provides precise performance
In production, all thermal switches are factory-calibrated to make electrical contact at the specified lower-temperature set point
Robust design and high grade materials meet the stringent demands of today’s service professional

from

$6.99

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$13.99

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$19.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$7.29

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$20.79

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$21.99

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$40.05

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$94.99

Rapid-Cool® Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan

from

$55.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$99.99

Product Features:

Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$9.29

Original equipment design provides exact fit and performance.

Product Features:

Precise fitting sealing edges prevent leakage and premature cooling.
Self-cleaning and self-aligning thermostat valve.
Stainless steel assembly and springs are engineered for long life and smooth performance.

from

$38.49

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Preset thermostatic fan control
185°F preset
For use with Imperial electric fans
Probe installs into radiator fins

from

$62.99

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160°F – 210°F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator

from

$23.99

Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$29.99

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$21.99

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$17.29

from

$2.99

Direct replacement - this radiator drain petcock matches the fit and function of the original equipment part.
Durable construction - this part is made of quality materials for a long service life
Saves money - offers original equipment quality at a competitive price
Quality assured - this petcock has undergone virtual testing to assure proper fit and function

from

$30.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
In manufacturing, we custom form the wax pellets for different temperature range specifications. All units are calibrated & tested to confirm switch actuation at their specified temperature
The switch is designed using a formed bimetallic contact arm. The bimetal contact movement is achieved using the different expansion rates of two metals fused together. This is a creep action device, provides precise performance
In production, all thermal switches are factory-calibrated to make electrical contact at the specified lower-temperature set point
Robust design and high grade materials meet the stringent demands of today's service professional

from

$39.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$56.99

Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:

Delphi temperature sensors deliver accurate readings and optimal performance
Delphi's one-piece design and automated production process eliminates internal connectors and failure points
Each sensor is electrically insulated to eliminate interference from other components in the vehicle
Delphi temperature sensors are impervious to electrical noise and interference

from

$12.85

The Sankei Switches radiator cap range has been developed to operate within original equipment manufacturer's specifications. A faulty radiator cap can cause your car to boil-over at a lower temperature. Test or replace the coolant cap when servicing the cooling system.

Product Features:

Meets Original Equipment specifications.
Made from premium materials.
Designed to function on open cooling systems and overflow reservoir type systems.

from

$17.79

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$16.79

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to

from

$13.43

Water Temperature Sender

from

$291.00

The Koyo Cooling radiator has been engineered to the highest standards and incorporates application specific mounting locations for all fan shrouds, inlet-outlet hoses and top-bottom mounting pins, ensuring quick and pain-free installs.

Product Features:

OE-Equivalent
Direct fit for easy installation
All Copper Core
OE Style mounting brackets and hose connections
Integrated transmission oil cooler when applicable
Compact and lightweight

from

$173.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$125.99

Trimline Straight Blade Electric Fan

from

$94.99

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$71.17

Auxiliary Fan Motor

from

$54.59

The FAE Engine Cooling Thermo-Fan Switch is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Corrosion resistant housings
Nickel-plated or brass terminals for superior conductivity
High-temp composite O.E.M.-type connectors designed to mate with vehicle wiring harness without modification
Thermal switches matched to OEM temperatures to assure consistent performance

from

$50.81

The NTC-Tama Engine Coolant Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$50.47

The FAE Engine Cooling Thermo-Fan Switch is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Corrosion resistant housings
Nickel-plated or brass terminals for superior conductivity
High-temp composite O.E.M.-type connectors designed to mate with vehicle wiring harness without modification
Thermal switches matched to OEM temperatures to assure consistent performance

from

$38.99

Permatex's The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric "Formed-in-place" material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$33.99

from

$32.00

The FAE Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$22.99

This radiator cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement - this radiator cap is designed to match the fit and function of the original cap on specified vehicles.
Restores functionality - reliable replacement for an original cap that is missing, leaking or failed due to gasket fatigue and heat
Durable construction - this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience

from

$20.24

Dorman's Engine Coolant Thermostat Housing has improved durability and resistance. It withstands the extreme changes in temperature that frequently cause housing to become brittle, crack and leak. Maintain the steady flow of coolant and lessen the chances of overheating.

Product Features:

Direct replacement for a proper fit every time
Hoses slide on for easy installation
High-quality plastic or metal construction
Includes all hardware necessary for a complete repair (where applicable)

from

$17.99

DENSO+s First Time Fit relays are no different from the OE relays DENSO has manufactured for over 60 years + built to be quiet, efficient, and reliable. Designed and manufactured to outlast the closest competitor by a minimum of ten times more life cycles, DENSO+s First Time Fit Relays will most likely out last your car. Holding approximately 30,000 active patents worldwide - approximately 7,300 in the United States - DENSO is going all out to design groundbreaking systems and components tuned especially to consumers' specifications - whether they are drivers, passengers, pedestrians or society as a whole.

from

$16.99

Ideal replacement - this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design - professionally engineered by the aftermarket leader in replacement thermostat housings

from

$14.93

Water Temperature Se

from

$11.04

Radiator Cap

from

$10.65

Water Temperature Se

from

$3.21

Water Pipe O-Ring

Most Popular 1992 Acura Vigor Air Conditioning Parts

Customize your Acura with 14 Air Conditioning Parts products like AC Compressor Without Clutch, Expansion Valve and Orifice Tubes, and AC Line O-Rings, all priced under $367.99.

show more show less

from

$16.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$17.99

This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement - this HVAC relay connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution - this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction - this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience

from

$52.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$33.49

from

$54.99

from

$28.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$19.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$367.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle's air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle's part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$89.99

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$84.09

The Four Seasons® Cooling Fan Motor is designed for quiet operation and dependable performance. We understand proper cooling fan operation is essential to everything from vehicle drivability to A/C system performance. But not all Cooling Fan Motor's are created equal. Why would anyone risk installing an inferior product? Therefore, we go above and beyond with research, validation and testing before we add any new part numbers. Every Four Seasons Cooling Fan Motor is designed and tested to provide years of dependable performance. We provide quality drop-in-replacement units that are designed to O.E specifications.

Product Features:

Out of box, drop in replacements
Factory style connectors
Factory mounts for easy install
Motors that meet or exceed factory performance
Exact fit
Reduced labor time
Higher customer satisfaction

from

$57.42

Air Conditioning Pressure Switch

from

$37.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$26.99

DENSO+s First Time Fit relays are no different from the OE relays DENSO has manufactured for over 60 years + built to be quiet, efficient, and reliable. Designed and manufactured to outlast the closest competitor by a minimum of ten times more life cycles, DENSO+s First Time Fit Relays will most likely out last your car. Holding approximately 30,000 active patents worldwide - approximately 7,300 in the United States - DENSO is going all out to design groundbreaking systems and components tuned especially to consumers' specifications - whether they are drivers, passengers, pedestrians or society as a whole.

from

$25.99

Top-Rated Cooling and Climate Controls Brands For Your 1992 Acura Vigor

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 1992 Acura Vigors. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Carquest Premium, and Imperial, and more. Cooling and Climate Controls from these brands that fit a 1992 Vigor start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 1992 Acura Vigor Cooling and Climate Controls

When it comes to maintaining or upgrading your 1992 Acura Vigor, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 1992 Acura Vigor. With over 3 Permatex brand Cooling and Climate Controls in stock, you're sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

"Goood product"

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

"it worked great,thank you marv and your crew."

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

Popular Carquest Premium 1992 Acura Vigor Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 1992 Acura Vigor owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1992 Vigor, Advance Auto Parts carries a full inventory of 21 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Acura in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $9.29 to $367.99, plus, with more than 311 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$21.99

This product is not rated

Temperature Sender With Gauge

from
$29.99

This product is not rated

Coolant Temperature Sensor

from
$17.29

This product is not rated

Multi Purpose Relay

FAQs for 1992 Acura Vigor Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 1992 Acura Vigors?

Out of 64 Cooling and Climate Controls that fit 1992 Acura Vigors, the following parts are the top sellers:

Standard Thermostat: 180 Degrees (5481287) - $19.99
Adjustable Thermostatic Fan Control (6016936) - $22.99
Electric Fan - 12" Diameter (6016901) - $94.99

What’s the price range for 1992 Acura Vigor Cooling and Climate Controls?

Cooling and Climate Control prices for the 1992 Acura Vigor start at $2.19 and go up to $367.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 1992 Acura Vigor?

The average price for Cooling and Climate Controls for the 1992 Acura Vigor is $46.07. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Acura Vigor model years?

Yes, we currently carry Cooling and Climate Controls for 2 model years of Acura Vigors between 1993 and 1994. Cooling and Climate Controls are bought most frequently for the following model years: 1994 and 1993.

What are the cheapest Cooling and Climate Controls for my 1992 Acura Vigor?

The cheapest 1992 Acura Vigor Cooling and Climate Controls we carry in stock are:

Water Pipe O-Ring (10793285) - $2.19
Plastic Drain Cock Screw-In Type Screw-M14-2.0 (22972337) - $2.99
Engine Coolant Thermostat Housing Gasket (10018036) - $3.19
Water Pipe O-Ring (10792985) - $3.21
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) - $6.99

What are the top-rated Cooling and Climate Controls that fit the 1992 Acura Vigor?

Out of 1,566 reviews by customers, our 1992 Acura Vigor Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 1992 Acura Vigor and their top-rated products:

Engine Cooling Parts
- Thermostat: 180 Degrees (11920671) - $27.49
- Engine Cooling Fan Switch (18970358) - $37.05
- Adjustable Thermostatic Fan Control (6016936) - $22.99
Air Conditioning Parts
- Thermostat: 180 Degrees (11920671) - $27.49
- Engine Cooling Fan Switch (18970358) - $37.05
- Adjustable Thermostatic Fan Control (6016936) - $22.99

What types of Cooling and Climate Controls do you sell for my 1992 Acura Vigor?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 1992 Acura Vigor:

Can I get help with 1992 Acura Vigor Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Acura Cooling and Climate Controls and more.

What is your return policy for Acura Vigor Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Acura Vigor Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1992 Acura Vigor Cooling and Climate Controls

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Carquest Premium – Engine Cooling Fan Switch (Part No.TFA1006)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432435)

Carquest Premium – A/C TXV O-Ring Expansion Valve (Part No.T38631)

Carquest Premium – Multi Purpose Relay (Part No.RAA1252)

DENSO – Relay (Part No.567-0052)

Carquest Premium – Multi Purpose Relay (Part No.FCA1004)

Imperial – Electric Fan – 14" Diameter (Part No.226114)

Dorman – Engine Coolant Thermostat Housing Cover (Part No.G4011702286DOR)

Carquest Premium – Fuel Pump Relay Connector (Part No.PTC1432)

Carquest Premium – A/C Compressor Cut-Out Switch (Part No.ACA1753)

Sankei Switches – Sankei Switches Radiator Cap (Part No.G1010324668SAK)

NOK – Water Pipe O-Ring (Part No.G202665192NOK)

Ishino – Water Pipe O-Ring (Part No.G202665192ISH)

Carquest Premium – A/C New, without Clutch, with 10PA17C Compressor (Part No.T58362)

Four Seasons – Cooling Fan Motor (Part No.G500690060AIR)

Carquest Premium – A/C Compressor Relay Connector (Part No.PTC1099)

Carquest Premium – Accessory Power Relay (Part No.RAA1815)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10233)

Carquest Premium – Standard Thermostat: 180 Degrees (Part No.14128)

Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 90 Degree Neck Angle (Part No.902-5081)

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T54970)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1054)

Santech – Air Conditioning Pressure Switch (Part No.R105464061SII)

Dorman – Help – Radiator Drain Cocks (Part No.61125)

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Motorad UltraStats – Thermostat: 180 Degrees (Part No.5302-180)

Carquest – Engine Cooling Fan Switch (Part No.WT680)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10233)

Carquest Premium – Standard Thermostat: 180 Degrees (Part No.14128)

Dorman – Help – Radiator Drain Cocks (Part No.61125)

Carquest Premium – Standard Thermostat: 170 Degrees (Part No.14337)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10333)

Carquest – Coolant Temperature Sensor (Part No.WT5009)

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Imperial – Electric Fan – 14" Diameter (Part No.226114)

Carquest Premium – Thermostat (Part No.48227)

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Motorad UltraStats – Thermostat: 170 Degrees (Part No.5302-170)

Carquest Premium - Coolant Temperature Sensor (Part No.WTC1012)

Carquest Premium - Temperature Sender With Gauge (Part No.WTC1054)

Carquest Premium - Multi Purpose Relay (Part No.FCA1004)

Dorman - Plastic Drain Cock Screw-In Type Screw-M14-2.0 (Part No.490-216.1)

Carquest - Engine Cooling Fan Switch (Part No.TFS700)

NTK - Engine Coolant Temperature Sensor (Part No.EF0069)

Delphi - Engine Coolant Temperature Sensor (Part No.TS10180)

Sankei Switches - Sankei Switches Radiator Cap (Part No.G1010324668SAK)

Carquest Premium - Radiator Cap Tester Adapter (Part No.12021)

Carquest Premium - Engine Coolant Temperature Switch (Part No.WTA1093)

NTC - Water Temperature Sender (Part No.P403646668NTC)

Koyo Cooling - Metal Core Radiator (Part No.G1000106295KCS)

Carquest Premium - Radiator: With Transmission Oil Cooler (Part No.432435)

Flex A Lite - Trimline Straight Blade Electric Fan (Part No.114)

Carquest Premium - Engine Cooling Fan Module (Part No.ACC1313)

VDO - Auxiliary Fan Motor (Part No.G50061572445VDO)

FAE - Engine Cooling Auxiliary Thermo-Fan Switch (Part No.G503065138FAE)

NTC - Tama Engine Coolant Temperature Sensor (Part No.C602060805NTC)

FAE - Engine Cooling Auxiliary Thermo-Fan Switch (Part No.G5030934587FAE)

Permatex - The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Carquest Premium - Engine Cooling Fan Switch (Part No.TFA1006)

FAE - Engine Coolant Temperature Sensor (Part No.C602060805FAE)

Dorman - Help - Radiator Cap (Part No.54237)

Dorman - Engine Coolant Thermostat Housing Cover (Part No.G4011702286DOR)

DENSO - Relay (Part No.567-0046)

Dorman - Coolant Housing/Water Outlet: With Housing and Gasket, 90 Degree Neck Angle (Part No.902-5081)

Sankei Switches - Water Temperature Se (Part No.P403646668SAK)

Autopart International Inc - Radiator Cap (Part No.G10101995143API)

Autopart International Inc - Water Temperature Se (Part No.P40362021283API)

NOK - Water Pipe O-Ring (Part No.G202665192NOK)

Factory Air - Cap & Valve A/C System Seal Kit (Part No.26777)

Dorman - 5-Wire Style Relay (Part No.85170)

Carquest Premium - A/C Compressor Relay Connector (Part No.PTC1099)