1991 Oldsmobile Custom Cruiser Distributors

Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:

• OE quality replacement parts for the right fit, form and function
• Delphi OE technology ignition products are validated to match the vehicle’s engine management system
• Delphi’s ignition products are designed and endurance tested to resist the common stresses that cause failure
• Designed & manufactured to meet OE performance, durability, and EMC level requirements

This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:

• Increased outer hardened layer thickness (RC 55-60)
• Micro Polished Surface For Smooth Contact
• Proprietary formulated ductile iron.
• Melonite QPQ coated reduces friction and initial wear
• Interstitial carbide improves wear resistance/running properties

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Validated for fit, form and function
• Unsurpassed quality you can trust

ACCEL cap and rotor kits offer superior protection from “arc-thru” and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Stainless Steel inserts and steel rotor springs provide for high spark energy flow.

Product Features:

• Features Protection From Arc Thru And Crossfire
• Features 60k V Rated Alkyd Compound
• Stanless Steel Terminals Inserts And Steel Rotor Springs
• High Spark Energy Flow

ACDelco GM Original Equipment Distributor Cap is a GM-recommended replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This original equipment cap will provide the same performance, durability, and service life you expect from General Motors.

Product Features:

• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

• Direct-fit OE replacement ensures ease of installation
• Designed to meet OE performance
• As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
• As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

Product Features:

• Fits stock distributor
• High quality material
• Brass terminals
• High dielectric properties

Chevrolet V8 engines with HEI/EST remount mount coil 8132 35362 applications include 1987-93 Cars and 1987-95 Trucks (Supersedes 60110).

Product Features:

• Features Protection From Arc Thru And Crossfire
• Features 60K V Rated Alkyd Compound

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

• Made from hi-performance 60 KV rated alkyd molding compound.
• Cap and rotor kits include nylon rotor hold-down screws.
• Flame-Thrower dust covers provide a larger air gap around the coil.

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

• Made from hi-performance 60 KV rated alkyd molding compound.
• Cap and rotor kits include nylon rotor hold-down screws.
• Flame-Thrower dust covers provide a larger air gap around the coil.

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
• Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
• Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
• Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
• Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
• Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
• Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

• Made from hi-performance 60 KV rated alkyd molding compound.
• Cap and rotor kits include nylon rotor hold-down screws.
• Flame-Thrower dust covers provide a larger air gap around the coil.

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

• Made from hi-performance 60 KV rated alkyd molding compound.
• Cap and rotor kits include nylon rotor hold-down screws.
• Flame-Thrower dust covers provide a larger air gap around the coil.

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

• Made from hi-performance 60 KV rated alkyd molding compound.
• Cap and rotor kits include nylon rotor hold-down screws.
• Flame-Thrower dust covers provide a larger air gap around the coil.

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

• Made from hi-performance 60 KV rated alkyd molding compound.
• Cap and rotor kits include nylon rotor hold-down screws.
• Flame-Thrower dust covers provide a larger air gap around the coil.

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

• Made from hi-performance 60 KV rated alkyd molding compound.
• Cap and rotor kits include nylon rotor hold-down screws.
• Flame-Thrower dust covers provide a larger air gap around the coil.

Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:

• OE Quality Replacement Parts For The Right Fit , Form And Function
• Delphi OE technology ignition products are validated to match the vehicles system
• Delphi’s coil products are designed and endurance tested to resist the common stresses that cause failure
• Delphi parts are built to meet or exceed OE requirements

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
• Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
• Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
• Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

ACDelco GM Original Equipment Distributor Rotor is a GM-recommended replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This original equipment rotor will provide the same performance, durability, and service life you expect from General Motors.

Product Features:

• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:

• High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
• The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze.  The housing is fabricated using polyamide resins.  All of the materials together provide the connectors with prolonged life and superior performance.
• All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
• Offering thousands of high-quality pigtails & sockets for nearly every electrical job

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

• Direct-fit OE replacement ensures ease of installation
• Designed to meet OE performance
• As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
• As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
• Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
• Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
• Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
• Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
• Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
• Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:

• OE quality replacement parts for the right fit, form and function
• Delphi OE technology ignition products are validated to match the vehicle’s engine management system
• We back our ignition parts with proven materials, such as high quality stainless steel and plastics
• Delphi parts are built to meet or exceed OE requirements

Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• 100% new unit with no core charges
• Precision machined shafts result in high speed accuracy and help prevent bearing failures
• Every distributor is tested to ensure reliable and long-lasting performance
• O-rings or gaskets included where applicable
• Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
• Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
• Original Equipment Equivalent high voltage ignition coils.
• 100% New Components and fasteners eliminate premature failures.

GM late-model performance enthusiasts will be happy to see this Pro-Billet distributor. The distributor, PN 8366, is a drop-in. Replacement for GM V8s using the small cap distributor with a dual connector coil found in cars from 1987-1993 and trucks from 1987 to 1995. The entire housing is CNC-machined to exact tolerances for incredible strength (Not to mention cool looks). For improved lubrication there is an extra oil tract machined into the bottom of the housing that delivers oil directly to the cam and distributor gears. Inside, a polished steel shaft receives guidance from a sealed ball bearing and an extra-long sintered bushing adds stability. This 0.500 In. shaft also receives a QPQ coating for increased friction reduction and corrosion resistance. A factory-style ignition module is supplied with the distributor so your factory wiring will plug directly in triggering this module is the responsibility of a high output magnetic pick-up.

Product Features:

• Drop-in billet replacement for GM dist. w/small cap/external coil
• Factory style ignition module accepts factory wiring
• CNC machined billet aluminum housing and billet aluminum base
• Maintenance-free magnetic pickup and precision reluctor
• Oversized steel shaft is QPQ coated
• Guided by sealed ball bearing and an extra long sintered bushing
• Special oil tract improves lubrication to the dist./cam gear
• O-ring seals can be installed for oil press. control (Mods only)
• Supplied w/Late Model Distributor Cap And Rotor
• Legal to install in all 50 states

Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our I3 billet distributors ship with the all NEW Ignitor III multi-spark rev limiting modules. Replace your outdated points, electronic distributor

Product Features:

• PerTronix D7110700 Flame-Thrower Electronic Distributor Billet Oldsmobilemobile V8 with Ignitor III Vacuum Advance Black Cap
• Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford

Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our I3 billet distributors ship with the all NEW Ignitor III multi-spark rev limiting modules. Replace your outdated points, electronic distributor

Product Features:

• PerTronix D7110800 Flame-Thrower Electronic Distributor Billet Oldsmobilemobile V8 with Ignitor III Non Vacuum Black Cap
• Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford

Flame Thrower Street/Strip distributors have a speciall Flame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM.

Product Features:

• New lightweight A384 cast aluminum alloy housing.
• Aligned and honed high quality bronze sintered bushings for reduced friction and extended life.
• Centerless ground corrosion resistant shaft reduces friction and provides concentric operation.
• RACE ONLY 7.2 amp module and 50,000 volt coil.
• Distributor gear is ground to exact tolerances for tighter mesh with cam. (Bronze distributor gear available)

Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:

• PerTronix D110801 Flame-Thrower Electronic Distributor Billet Oldsmobile V8 Plug and Play with Ignitor II Technology Non Vacuum Advance Red Cap
• Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.

Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:

• PerTronix D110800 Flame-Thrower Electronic Distributor Billet Oldsmobile V8 Plug and Play with Ignitor II Technology Non Vacuum Advance Black Cap
• Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.

Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:

• PerTronix D110700 Flame-Thrower Electronic Distributor Billet Oldsmobile V8 Plug and Play with Ignitor II Technology Vacuum Advance Black Cap
• Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.

STREET / STRIP HEI distributorsOur HEI distributors are built from the ground up with all new components. We have engineered a special high energy module and coil combination that operates without misfires beyond 7500 RPM. That’s nearly 3000 RPM higher t

Product Features:

• PerTronix D1101 Flame-Thrower Distributor HEI Oldsmobile V8 Red Cap
• New lightweight aluminum alloy housing.

CARDONE New Distributors are backed by CARDONE Engineered Technology, which ensures that all CARDONE New Distributors meet proper form, fit and function. CARDONE Engineered Technology is based on over 40 years of reverse-engineering expertise, where original design weaknesses are identified and corrected, resulting in premium-quality, brand-new parts you can rely on. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Product Features:

• Each distributor includes the cap and rotor to make installation a snap.
• Dust covers and gaskets are also included on Honda applications for your convenience.
• 100% computer tested for guaranteed, long-lasting performance.
• Guaranteed fit and function.
• Meets or exceeds O.E.M performance.