1991 Ford Thunderbird Performance and Racing Products

Popular 1991 Ford Thunderbird Performance and Racing Products Categories

Essential Performance and Racing Products for 1991 Ford Thunderbirds

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.923G)

Ultra Seal: Sure-Lock Rocker Arm Nuts

from

$87.19
Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.

Product Features:
  • (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
  • Shank O.D. .540″
  • Includes Locks and Hex Wrench
  • High-Quality Grade Steel
  • Heat-Treated For Ex Strength
  • Plated With Durable Gold Tone Finish
See More

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.31-238-3)

Xtreme Energy 218/224 Hydraulic Flat Cam

from

$257.99
HYDRAULIC – Xtreme Energy: Excellent response, good mid-range, stock converter, 3.23-4.10 gear.

Product Features:
  • HYDRAULIC – Xtreme Energy: Excellent response, good mid-range, stock converter, 3.23-4.10 gear.
  • 262/270 Advertised Duration, 218/224 Duration @ .050″, .493″/.500″ Lift, 110 Lobe Separation
  • Valve spring upgrade required
  • 289-302 Firing Order
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1416)

Exhaust Manifold Gasket Set

from

$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

MSD Ignition – Distributor; Ford FE; Ready-to-Run (Part No.8595)

Distributor; Ford FE; Ready-to-Run

from

$569.99
MSD is excited to offer two Ready-to-Run distributors for two classic Ford engines! These distributors are the answer to weak breaker points or rebuilt aftermarket models. Inside the billet housing there is a high-output ignition module. When the maintenance-free magnetic pick-up signals the module to fire, up to 7.5 A is sent to the coil where a powerful spark is created. This improved spark output results in quick starts, snappy throttle response and terrific drivability. The distributors are equipped with a vacuum advance canister for cruising economy. Plus, there is a mechanical advance assembly that is mounted on top of the distributor shaft making it easy to adjust the advance to meet your needs. Another great feature of the Ready-to-Run distributors is their simple installation! All you need to do is connect three wires and you’ll be cruising!

Product Features:
  • Simple and clean three wire installation
  • CARB E.O. Approved
  • Does not require an MSD Ignition Control
  • Supplied w/small dia. cap w/HEI style terminals; race and rotor
  • Will accept PN[8441] Cap-A-Dapt
  • Nylon pads ensure smooth operation of the advance weights
  • Advance weight pins are staked and tig welded to the plate
  • Mech. advance assem. can be locked out for crank trigger systems
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$30.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

Competition Cams – PUSHROD SET, SBF HIGH ENERGY 1 ST (Part No.7831-16)

PUSHROD SET, SBF HIGH ENERGY 1 ST

from

$75.99
High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RVs and daily drivers. High Energy Pushrods have a durable one-piece construction that meets or exceeds all OE pushrod specifications and fit perfectly with High Energy and Magnum Rocker Arms.

Product Features:
  • 5/16″ diameter, 6.881″ length for Small Block Ford 255 and 302, ’65-up with Flat Tappet Cam
  • Best choice when building street rods, RVs or daily drivers
  • Meet or exceed all OE pushrod specifications
  • Mate perfectly with High Energy and Magnum Rockers
  • Durable one-piece construction
See More

Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7820)

Performer-Link Adjustable True-Roller Timing Chain Set

from

$67.99


Product Features:
  • Solid Bushing Chain Resists Stretching
  • For Use with Stock or Edelbrock Camshafts
  • Stressproof Steel Crank Gears
  • 3 Keyway Setting Points To Ensure Accurate Timing
  • True Bearing Surface Rolls with the Sprockets
  • For Engine with One-Piece Fuel Pump Eccentric
See More

Accel – Ford Tfi Modulator 1983-96 (Part No.35368)

Ford Tfi Modulator 1983-96

from

$96.99
This high performance ignition module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most Ford Thick Film Ignition systems. 1983 thru 1996.

Product Features:
  • Fits Most Stock And Modified Distributors
  • Dwell Control Circuit
  • Resists False Triggering
See More

Powertrax – Lock Right Locker (Part No.1821-LR)

Lock Right Locker

from

$441.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5138R)

    Sway Bar Bushing Set

    from

    $32.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More

    Earls Performance Product – Brake Bleeder Screws (Part No.280022ERL)

    Brake Bleeder Screws

    from

    $32.59
    Brake Bleeder Screws

    MSD Ignition – Distributor Cap/Rotor Kit; Ford Duraspark (Part No.8450)

    Distributor Cap/Rotor Kit; Ford Duraspark

    from

    $56.99
    The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

    Product Features:
    • Designed w/Performance In Mind
    • High Quality Material
    • Stainless Terminals
    See More

    Mr. Gasket – Chrome Distributor Hold-Down Clamp (Part No.9860)

    Chrome Distributor Hold-Down Clamp

    from

    $13.29
    Chrome plated steel. Includes hold-down bolt or stud. Holds the distributor in place for accurate timing. Serrated bottom prevents the distributor from turning.

    Product Features:
    • Rolled Edges For Strength
    • Ideal For Magnetos
    • Ideal For Ignition Distributor
    See More

    MSD Ignition – Crank Trigger Kit; Small Block Ford (Part No.8640)

    Crank Trigger Kit; Small Block Ford

    from

    $593.99
    For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

    Product Features:
    • Absolutely The Most Accurate Way To Trigger The Ignition
    • The non-magnetic pickup cannot be false triggered.
    • Powerful magnets are embedded in a billet aluminum trigger wheel.
    • Incl. brackets/mounting hardware to fit a variety of engines
    See More

    Edelbrock – Performer RPM Carb/Plate Nitrous Systems for Square-Bore Carbs (75-250 Hp) (Part No.70003)

    Performer RPM Carb/Plate Nitrous Systems for Square-Bore Carbs (75-250 Hp)

    from

    $1113.99


    Product Features:
    • Designed To Add Power In Stages
    • Softens The Hit Of The Nitrous System
    • Control Excessive Tire Spin
    • Control Violent Chassis Reaction
    • Allows You To Adjust The 1st Stage
    See More

    Spectre – Oil Pan (Part No.5490)

    Oil Pan

    from

    $196.99
    Spectre’s Chrome Oil Pans feature a front sump and triple chrome plating. This product is designed to fit Ford passenger cars and 2 wheel drive trucks with 351C, 351M, and 400 engines. This OEM replacement oil pan is manufactured using high quality materials and is engineered for optimum fit and function.

    Product Features:
    • Triple chrome-plated
    • Steel construction
    • Front sump
    • OEM replacement.
    See More

    Spectre – Water Neck; Ford 429-460 (Part No.4734)

    Water Neck; Ford 429-460

    from

    $54.99
    Spectre’s Ford V8 water neck fits Ford 429 – 460 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck includes sealing O-ring, and has a 3/8 inch NPT threaded hole for the Ford temp sensor.

    Product Features:
    • Fits Ford 429 – 460 engines
    • Has a 3/8 inch NPT threaded hole for temperature sensor
    • Includes sealing O-ring
    • Chrome plated
    • Easy to install
    • Hardware not included
    See More

    Mr. Gasket – Rear Main Seal Gasket (Part No.1963)

    Rear Main Seal Gasket

    from

    $42.49
    This Mr. Gasket Rear Main Seal is made from silicone to allow the seal to handle extreme engine oil temperature. It also provides for an upgrade for that leaky rope style seal and is a direct replacement for a rubber main seal. It’s also injection molded for a precise fit.

    Product Features:
    • Repairs That Leaky Rear Main Sail
    • Silicone Rubber to Withstand Extreme Engine Oil Temperatures
    • Upgrade for Rope Seal Equipped Cars or Direct Replacement for Rubber Main Seal
    • Injection Molded for Precise Fit
    See More

    Edelbrock – Performer Small-Block Ford 5.0L/ 5.0L Cylinder Head 2.02" Bare (Part No.60389)

    Performer Small-Block Ford 5.0L/ 5.0L Cylinder Head 2.02" Bare

    from

    $594.99


    Product Features:
    • 50-State Street Legal Aluminum Cylinder Head
    • Out-of-the-Box Bolt-On Performance
    • Hand-Blended Intake and Exhaust Bowls
    • CNC-Matched Intake/Exhaust Ports in Std Location
    • Thicker Deck Surfaces than Other Brands
    See More

    Edelbrock – Water Pump for Ford 429/460 in Polished Finish (Part No.8876)

    Water Pump for Ford 429/460 in Polished Finish

    from

    $526.99
    Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

    Product Features:
    • Maximum Cooling for Street and Racing Engines
    • Internal Passages Are Balanced for Maximum Flow
    • Impeller is Larger than Others For Max Pressure
    • Impeller Vanes Dramatically Increase Flow Rates
    • Equal Distribution to Both Sides of Block
    • Only Flows in One-Direction for Optimum Efficiency
    See More

    Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4105)

    Differential Pinion Solid Spacer Kit w/Shims

    from

    $22.79


    Product Features:
    • FORD 9″ SOLID SPACER KIT
    See More

    MSD Ignition – Coil; Street Fire; Ford TFI (Part No.5527)

    Coil; Street Fire; Ford TFI

    from

    $65.99
    These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

    Product Features:
    • Bolt-on Performance
    • Factory replacement coil
    See More

    Edelbrock – Signature Series Valve Covers: Ford 351M-400 & 351C V8, Chrome Steel, Set Of 2 (Part No.4461)

    Signature Series Valve Covers: Ford 351M-400 & 351C V8, Chrome Steel, Set Of 2

    from

    $83.99
    The Edelbrock #4461 Signature Series Valve Covers are designed for Ford 351M-400 and 351C V8 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

    Product Features:
    • Ford 351M-400 & 351C V8
    • Short
    • Chrome Steel
    • Set Of Two
    • Rubber Grommets For Breather
    See More

    MSD Ignition – Distributor Cap; Ford HEI; Black (Part No.84083)

    Distributor Cap; Ford HEI; Black

    from

    $61.19
    All the quality and performance you’ve come to expect from MSD is now available in black. Our customers have requested black parts for their builds so we’ve answered with the addition of several black distributor caps and cap and rotor kits. The black parts are built to the exact specifications of the traditional MSD red components. If you’re looking to change up the look under the hood of your street machine, off-road rig or race car; check out the complete line of MSD black components.

    Product Features:
    • Injection Molded From DuPont Rynite Material
    • Extreme strength; high dielectric properties
    • Designed with performance in mind
    • High quality; voltage insulating material
    • Brass terminals
    • Black in color
    See More

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5138G)

    Sway Bar Bushing Set

    from

    $33.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More

    Mr. Gasket – Enhancement Products (Part No.8830)

    Enhancement Products

    from

    $70.99
    Replace your stock black engine pulleys with a pair of chrome plated steel pulleys from Mr. Gasket. The pulleys are highly polished then chrome plated for lasting beauty.

    Product Features:
    • Highly polished for lasting beauty
    See More

    B & M – Torque Converter, Tork Master 2400 (Part No.50441)

    Torque Converter, Tork Master 2400

    from

    $450.99
    A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength. Due to torque converter co

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    See More

    Edelbrock – 289-302 Ford Head Bolt Kit (Part No.8552)

    289-302 Ford Head Bolt Kit

    from

    $107.99


    Product Features:
    • Highest Quality Head Bolts
    • Cold-Formed/Heat Treated
    • Ensures Molecular Integrity
    • Reduced Diameter Bolt Heads
    • Hardened/Parallel-Ground Washers Included
    • Rated At 170000 psi
    • Manufactured By ARP
    See More

    Upgrade your 1991 Ford Thunderbird with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1991 Ford Thunderbird, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your Thunderbird functioning at its best. At Advance Auto Parts, we offer a wide selection of 99 Performance and Racing Products for the 1991 Ford Thunderbird, designed to meet your needs without breaking the bank. From Performance Engine replacements to Performance Exhaust Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1991 Ford Thunderbird at great prices. Our Performance and Racing Products inventory for this model ranges from just $9.99 to $1,170.00, with an average price of $245.97. Our 99 Performance and Racing Products in stock come from 19 trusted brands, so you’re sure to find the right part for your 1991 Ford Thunderbird without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1991 Ford Thunderbird, we stock popular OEM and aftermarket Performance and Racing Products from top names like Mr. Gasket, FEL-PRO Performance, Accel, and more. Mr. Gasket Performance and Racing Products start at just $19.99 and boast an impressive 4 stars average rating from customers. FEL-PRO Performance and Accel also bring quality to the table, with Performance and Racing Products available starting at $33.99, and at an average 4 stars rating. With 401 customer reviews and counting, our 1991 Ford Thunderbird Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1991 Ford Thunderbird is always ready to roll. We’re committed to providing you with everything you need to keep your Thunderbird in top shape, all in one place. Start shopping confidently below for your 1991 Ford Thunderbird!

    Best-Selling Performance Engines for 1991 Ford Thunderbirds

    Enhance the driving experience in your Ford with 35 quality Performance Engine components, starting at $19.99.

    FEL-PRO Performance – Lower Intake Manifold Gasket Set: 11 Piece Set (Part No.1250)

    Lower Intake Manifold Gasket Set: 11 Piece Set

    from

    $33.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
    • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
    • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
    • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
    See More

    FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1684)

    Engine Valve Cover Gasket Set

    from

    $46.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Rigid core, molded silicone rubber gaskets provide for ease of installation, and are great for on-again/off-again situations (like setting valve lash).
    • Features high-tech silicone material for long life, a solid steel core for strength and durability, and stainless steel compression limiters to prevent
    • Not intended for use in emission controlled vehicles.
    See More

    Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

    High Performance 180 Degree Thermostat for Increased Flow

    from

    $26.99
    Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

    Product Features:
    • Opens At 180 Degrees
    • Designed to Resist Large Variations of Coolant Pressure at High RPM
    • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
    • For High Performance Street, Drag Race, and Oval Track
    • Copper & Brass Construction – Resists Corrosion
    • High Flow
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1011-2)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $55.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
    • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
    • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
    • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
    • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    See More

    Edelbrock – Intake Manifold Gasket for 1963-1996 Small-Block Fords (Part No.7220)

    Intake Manifold Gasket for 1963-1996 Small-Block Fords

    from

    $28.99


    Product Features:
    • Clean Positive Seal
    • Embossed Silicone Bead Surrounding The Port
    • Matched To Manifolds And Cylinder Heads
    See More

    Edelbrock – 289-302 Ford Head Bolt Kit (Part No.8552)

    289-302 Ford Head Bolt Kit

    from

    $107.99


    Product Features:
    • Highest Quality Head Bolts
    • Cold-Formed/Heat Treated
    • Ensures Molecular Integrity
    • Reduced Diameter Bolt Heads
    • Hardened/Parallel-Ground Washers Included
    • Rated At 170000 psi
    • Manufactured By ARP
    See More

    Mr. Gasket – Intake Manifold Bolts (Part No.958G)

    Intake Manifold Bolts

    from

    $19.99
    These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 5/16 inch-18 x 2 inch bolts & washers

    Product Features:
    • Hex Head
    • Zinc Plated
    • Ideal For Minimal Space
    • 12-Point Head And Flange
    • Zinc Plated For Protection
    See More

    Competition Cams – ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST (Part No.17043-16)

    ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST

    from

    $237.99
    The COMP Cams High Energy Die-Cast Aluminum Roller Rocker Arms are new rocker arms from the valve train leader that have been designed for street and moderate race use. They feature a die-cast body created from aluminum with a needle bearing fulcrum and roller tip. The die-cast, larger than stock body offers the strength properties and light weight of aluminum while the specially engineered fulcrum and roller tip decrease friction and lower oil temperatures, thus improving response and horsepower.

    Product Features:
    • Cost effective aluminum construction provides superior strength to weight ratio
    • Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
    • Durable design increases valve lift while withstanding the rigors of moderate race use
    • Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.
    See More

    Competition Cams – PUSHROD SET, SBF HIGH ENERGY 1 ST (Part No.7831-16)

    PUSHROD SET, SBF HIGH ENERGY 1 ST

    from

    $75.99
    High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RVs and daily drivers. High Energy Pushrods have a durable one-piece construction that meets or exceeds all OE pushrod specifications and fit perfectly with High Energy and Magnum Rocker Arms.

    Product Features:
    • 5/16″ diameter, 6.881″ length for Small Block Ford 255 and 302, ’65-up with Flat Tappet Cam
    • Best choice when building street rods, RVs or daily drivers
    • Meet or exceed all OE pushrod specifications
    • Mate perfectly with High Energy and Magnum Rockers
    • Durable one-piece construction
    See More

    Mr. Gasket – Precision Timing Tape (Part No.1594)

    Precision Timing Tape

    from

    $21.79
    Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.

    Product Features:
    • 6 3¿8″ diameter
    • 6 3┐8″ diameter
    • 289-302-351 cu. in.
    • Increased Performance
    • Set Valve Lash At Proper Time
    See More

    Mr. Gasket – Water Neck (Part No.9713)

    Water Neck

    from

    $48.09
    Precision die cast, these water necks or thermostat housings are first polished to a high luster, then chrome plated. Comes with gasket and Allen head mounting bolts. Fits 1979-1997 Ford 5.0/5.8L V8s.

    Product Features:
    • Chrome Plated For Great Looks
    • Includes Gasket & Mounting Bolts
    See More

    Mr. Gasket – Mls Head Gasket (Part No.3175G)

    Mls Head Gasket

    from

    $110.99
    Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids.brbrA typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.

    Product Features:
    • Gasket bore – 4.030 inch: Compressed thickness – .040 inch
    • Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
    • Optimized sealing embossments seals extreme cylinder pressure
    • Provides excellent stability and reduces cylinder bore distortion.
    • Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
    • Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
    • For high-performance street, drag race and oval track use
    See More

    Mr. Gasket – Rear Main Seal Gasket (Part No.30)

    Rear Main Seal Gasket

    from

    $42.49
    This Mr. Gasket Rear Main Seal is made from silicone to allow the seal to handle extreme engine oil temperature. It is a direct replacement for a factory one-piece rubber main seal. It’s also injection molded for a precise fit.

    Product Features:
    • Repairs that leaky rear main seal
    • Direct replacement for stock one-piece seal
    • Silicone rubber to withstand extreme oil temperatures
    • Injection molded for precise fit
    See More

    Mr. Gasket – Ultra Seal: Oil Pan Gasket (Part No.6683)

    Ultra Seal: Oil Pan Gasket

    from

    $59.19
    High performance, race quality gasket with molded rubber coating over a steel core. Steel core provides rigidity and durability, preventing prevent push out while the molded rubber coating helps seal minor oil pan rail irregularities. The one piece design eliminates the need for separate end seals to make installation easier and even further reduce the possibility of oil leakage. Provides excellent sealing and durability. Excellent replacement for stock original equipment, high performance street, drag race and oval track. Includes gasket and new oil pan bolts.

    Product Features:
    • Steel core provides rigidity, durability and prevents gasket push out
    • Molded rubber coating seals minor irregularities in pan surface
    • One piece design is easier to install and even less prone to leak
    • Direct replacement suitable for all uses – street, racing, heavy duty
    • Include both gasket and new oil pan bolts
    • No Cork Particles
    • Easy Removal For Disassembly
    See More

    Edelbrock – Pushrod Set for Ford 289-302 (Part No.9655)

    Pushrod Set for Ford 289-302

    from

    $208.99
    Edelbrock part #9655 Pushrods are designed for small-block Ford 289-302 V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precis

    Product Features:
    • 6.4 in. Length
    • 0.312 in. Diameter
    • 4130 Chromoly Steel Material
    • Black Oxide Finish
    • Made In The USA
    See More

    Holley – Intake Manifold (Part No.300-72S)

    Intake Manifold

    from

    $1170.00
    Holley products have been the undisputed leader in fuel systems for over 100 years. Holley carburetors power every NASCAR Sprint Cup team and every NHRA Pro-Stock champion. Holley’s products include performance fuel pumps, fuel injection, intake manifolds, cylinder heads & engine dress-up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies, Hooker Headers, Flowtech Headers, NOS, Weiand, or Earl’s, Holley products can give you the edge you need over the competition.

    Product Features:
    • Retains Stock Injector
    • Retains Water Outlet Locations
    • Internal Erg Passage
    • External EGR Passage
    • Maximized Port and Runner Sizes
    • Maximum Unrestricted Air Flow
    • 50 State Legal
    See More

    Competition Cams – XE Computer Controlled 206/212 Hydraulic Roller Cam K-Kit (Part No.K35-512-8)

    XE Computer Controlled 206/212 Hydraulic Roller Cam K-Kit

    from

    $1157.99
    Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

    Product Features:
    • Excellent performance in street fuel injected applications.
    • More vacuum allows an increase in duration for improved performance and assists power brakes.
    • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
    • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
    See More

    Edelbrock – Performer Small-Block Ford 5.0L/ 5.0L Cylinder Head 2.02" (Part No.60399)

    Performer Small-Block Ford 5.0L/ 5.0L Cylinder Head 2.02"

    from

    $1035.99
    Product Features:
    • Complete Single For Flat Tappet
    • 60cc Combustion Chamber Volume
    • 170cc Intake/60cc Exhaust Runner Volume
    • 2.02 in. Intake/1.60 in. Exhaust Valve Diameter
    • 0.625 in. Deck Thickness
    See More

    Edelbrock – Performer Small-Block Ford 5.0L/ 5.8L Cylinder Head 1.90" (Part No.60379)

    Performer Small-Block Ford 5.0L/ 5.8L Cylinder Head 1.90"

    from

    $1035.99
    Product Features:
    • Capable of 300 plus horsepower when matched with the Edelbrock Performer Power Package
    • 1.90 in. intake valves are for use with stock pistons
    • Exhaust valve is 1.60 in.
    • 60cc combustion with 170cc intake port
    • Flat Tappet Camshaft Type
    See More

    Edelbrock – Performer Small-Block Ford 1.90 Cylinder Head Flat Tappet Springs, Polished (Part No.603219)

    Performer Small-Block Ford 1.90 Cylinder Head Flat Tappet Springs, Polished

    from

    $966.99
    50 state street legal aluminum cylinder head. Out-of-the-box bolt-on performance. Intake valves are used for stock pistons.

    Product Features:
    • 50-State Street Legal Aluminum Cylinder Head
    • Out-of-the-Box Bolt-On Performance
    • Hand-Blended Intake and Exhaust Bowls
    • CNC-Matched Intake/Exhaust Ports in Std Location
    • Thicker Deck Surfaces than Other Brands
    • Heli-Coils in Rocker Studs and Exhaust Bolt Holes
    See More

    B & M – Torque Converter, Tork Master 2400 (Part No.40438)

    Torque Converter, Tork Master 2400

    from

    $605.99
    A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength.

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    • Washer Between Turbine and Cover
    See More

    Edelbrock – Performer Small-Block Ford 5.0L/ 5.0L Cylinder Head 2.02" Bare (Part No.60389)

    Performer Small-Block Ford 5.0L/ 5.0L Cylinder Head 2.02" Bare

    from

    $594.99


    Product Features:
    • 50-State Street Legal Aluminum Cylinder Head
    • Out-of-the-Box Bolt-On Performance
    • Hand-Blended Intake and Exhaust Bowls
    • CNC-Matched Intake/Exhaust Ports in Std Location
    • Thicker Deck Surfaces than Other Brands
    See More

    Competition Cams – Thumpr 227/241 Hydraulic Roller Cam (Part No.31-600-8)

    Thumpr 227/241 Hydraulic Roller Cam

    from

    $522.99
    Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

    Product Features:
    • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
    • Best with aftermarket converters and more rear gear.
    • Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
    See More

    Competition Cams – Xtreme Energy Computer Controlled 206/212 Hydraulic Roller Cam (Part No.35-512-8)

    Xtreme Energy Computer Controlled 206/212 Hydraulic Roller Cam

    from

    $522.99
    Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

    Product Features:
    • Excellent performance in street carbureted applications.
    • More vacuum allows an increase in duration for improved performance and assists power brakes.
    • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
    • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
    See More

    Edelbrock – Throttle Body, 90mm, Pro-Flo XT, Ford-Style, Black Powder Coated Finish (Part No.38183)

    Throttle Body, 90mm, Pro-Flo XT, Ford-Style, Black Powder Coated Finish

    from

    $429.99
    The Edelbrock #38183 is a single-bore 90mm throttle body designed with a 5.0L Ford-style base pad. It is fully machined and assembled by Edelbrock. It includes a Throttle Position Sensor, a progressive throttle cable lever, and cruise and kick-down attach
    See More

    Competition Cams – Ultra-Gold ARC Rocker Set w/ 1.6 Ratio for Ford 289-351W w/ 3/8" Stud (Part No.19043-16)

    Ultra-Gold ARC Rocker Set w/ 1.6 Ratio for Ford 289-351W w/ 3/8" Stud

    from

    $427.99
    These COMP Cams Ultra-Gold Aluminum Roller Rocker Arms with a 3/8″ stud diameter and 1.6 ratio are designed for Ford V8 289-302-351W applications. The new modern design features of these Ultra-Gold Rockers are proven to withstand extremely aggressive spring pressure and valve lift. Designed specifically for high performance street and race engines, the Ultra-Gold Aluminum Rocker Arms are precision CNC-machined to strict tolerances. Developed to meet the demands of professional engine builders, these rockers include features never before possible in an aluminum rocker arm.

    Product Features:
    • CNC-machined, lightweight design removes weight and yields unrivaled quality and ratio accuracy
    • Designed for high performance street and race engines
    • Precision-sorted trunion bearings withstand elevated valve spring pressure and valve lift
    • Additional clearance, up to 1.650″ O.D. valve spring
    See More

    Edelbrock – Water Pump Ford 5.0 V8 Reverse Rotation in Black Finish (Part No.88403)

    Water Pump Ford 5.0 V8 Reverse Rotation in Black Finish

    from

    $337.99
    Edelbrock #88403 Water Pump Ford 5.0l 1986-93 reverse rotation black ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cool

    Product Features:
    • Reverse Impeller Rotation
    • 0.625 in. Pilot Shaft
    • 0.750 in. Ball/Ball Bearing
    • 5.750 in. Block To Hub Height
    • Black Finish
    See More

    Edelbrock – Water Pump Ford 5.0 V8 Reverse Rotation in Satin Finish (Part No.8840)

    Water Pump Ford 5.0 V8 Reverse Rotation in Satin Finish

    from

    $305.99
    Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in

    Product Features:
    • Maximum Cooling for Street and Racing Engines
    • Internal Passages Are Balanced for Maximum Flow
    • Impeller is Larger than Others For Max Pressure
    • Impeller Vanes Dramatically Increase Flow Rates
    • Equal Distribution to Both Sides of Block
    • Only Flows in One-Direction for Optimum Efficiency
    See More

    Edelbrock – Pushrod Set for Small Block Ford 289-302 (Part No.9632)

    Pushrod Set for Small Block Ford 289-302

    from

    $210.99
    Product Features:
    • Case-Hardened Tubing
    • Surface Hardening
    • Welded Ends
    • 0.3125 in. Diameter
    • Use with or without Hardened Steel Guideplates
    See More

    Edelbrock – Complete Sure Seat Valve Spring Kit for Ford 289-302 & 351W V8 (Part No.5796)

    Complete Sure Seat Valve Spring Kit for Ford 289-302 & 351W V8

    from

    $186.99
    Product Features:
    • Non-Rotator
    • 1.438 in. Outside Diameter
    • 1.024 in. Inside Diameter
    • 1.260 in. Coil Blind
    • Set of 16
    See More

    Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)

    Performer Series Retainer (Qty 16)

    from

    $100.99
    Product Features:
    • Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
    • Set of 16
    • 1.50 in. Outside Diameter
    • Steel Material
    • Black Oxide Finish
    See More

    FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2941)

    Engine Crankshaft Seal Kit

    from

    $48.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • PTFE offers the best in fluid and high-temperature compatibility and contact sealing surface can run on undersize shafts, seal minor imperfections and virtually eliminate shaft wear.
    • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
    • Not intended for use in emission controlled vehicles.
    See More

    Mr. Gasket – Super Intake Manifold Bolts (Part No.6082)

    Super Intake Manifold Bolts

    from

    $43.99
    Super Intake Manifold Bolts

    Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5834)

    Ultra Seal: Intake Gasket

    from

    $38.59
    Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.

    Product Features:
    • Manufactured from cellulose/nitrile composition gasket material
    • Provides excellent sealing and durability
    • Silicone beading on both sides of each gasket
    • Complete with manifold end seals and distributor gasket
    • For OE replacement, high performance street, drag race and oval track use
    • Creates Tight Leak proof Seal
    See More

    Edelbrock – TIMING CHAIN (Part No.7844)

    TIMING CHAIN

    from

    $29.99
    Product Features:
    • Timing Chain Only
    See More

    Most Popular 1991 Ford Thunderbird Performance Exhaust Products

    Customize your Ford with 6 Performance Exhaust Products products like Performance Exhaust Mufflers and Performance Exhaust Manifold Gaskets, all priced under $133.99.

    Flowmaster Inc. – 40 Series Muffler, 2in Center Inlet 2in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942042)

    40 Series Muffler, 2in Center Inlet 2in Offset Outlet, Non-Reversible, Aggressive Sound

    from

    $133.99
    This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5928)

    Ultra Seal: Exhaust Gasket Set

    from

    $38.59
    Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

    Product Features:
    • Manufactured from high-temperature steel core/graphite faced exhaust material
    • Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
    • Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
    • Conforms to and seals minor surface irregularities
    • Can be trimmed if necessary for modified port applications
    • For OE replacement, high performance street, drag race and oval track use
    • Anti-Stick Properties
    • Easy Removal For Disassembly
    See More

    FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1467)

    Exhaust Manifold Gasket Set

    from

    $45.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
    • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
    • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
    • Slotted bolt holes allow for easier header installation.
    • Not intended for use in emission controlled vehicles.
    See More

    Mr. Gasket – Exhaust Gasket Set (Part No.264G)

    Exhaust Gasket Set

    from

    $36.49
    Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.

    Product Features:
    • Manufactured from high-temperature acrylic blend exhaust material
    • Provides excellent sealing and durability
    • Can be trimmed if necessary for modified port applications
    • For OE replacement, high performance street, drag race and oval track use
    • Precision Die Cut For Excellent Fit
    See More

    FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1416)

    Exhaust Manifold Gasket Set

    from

    $39.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
    • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
    • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
    • Slotted bolt holes allow for easier header installation.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1468)

    Exhaust Manifold Gasket Set

    from

    $45.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
    • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
    • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
    • Slotted bolt holes allow for easier header installation.
    • Not intended for use in emission controlled vehicles.
    See More

    Top Picks for 1991 Ford Thunderbird Performance Oil Filters

    Upgrade Ford Thunderbirds with top-quality Performance Oil Filters parts, including 1 OEM and aftermarket selections for your 1991 model.

    Mr. Gasket – Remote Oil Filter Kit (Part No.7682)

    Remote Oil Filter Kit

    from

    $97.99
    This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.

    Product Features:
    • Relocate oil filter to an easy access location
    See More

    In-Demand Performance Distributors for 1991 Ford Thunderbirds

    Select from 16 premium Performance Distributors parts for your 1991 Ford Thunderbird, with prices ranging from $10.99 to $664.99.

    Accel – Distributor Cap And Rotor Kit (Part No.8230)

    Distributor Cap And Rotor Kit

    from

    $108.99


    Product Features:
    • Heavy Duty Cap and Rotor Kit
    • With Brass Inserts
    See More

    Proform – Ford HEI Distributor, Red Cap, For Ford 289-302 V8 Engines (Part No.66969R)

    Ford HEI Distributor, Red Cap, For Ford 289-302 V8 Engines

    from

    $228.99
    Fits Ford 289 – 302 (5.0). Utilizing the durable and dependable High Energy Ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-madeparts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-Ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found High Energy Ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Technical Note: Gear not compatible with roller cams. If using roller cams, please contact the cam manufacturer for proper gear selection.

    Product Features:
    • Street/Strip Version
    • Built-In Coil with Magnetic Trigger
    • Features Red Cap
    • Fits Ford 289-302 5.0 Engines
    • Comes with An Iron Gear and with Not Work with Factory Roller Cams
    See More

    MSD Ignition – Distributor Cap; Ford HEI (Part No.8408)

    Distributor Cap; Ford HEI

    from

    $52.99
    MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont? Rynite material and feature spark plug-style terminals. These terminals offer improved locking connections and the Rynite material is extremely strong with excellent dielectric properties. Plus, most caps have an optional wire retainer that is supplied with these caps to lock the wires in place.

    Product Features:
    • Designed w/Performance In Mind
    • High Quality Material
    • Stainless Terminals
    • Performance replacement part
    See More

    Accel – High-Performance Distributor Cap & Rotor Kit (Part No.8233)

    High-Performance Distributor Cap & Rotor Kit

    from

    $53.09
    ACCEL cap and rotor kits offer superior protection from “arc-thru” and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.

    Product Features:
    • Features Protection From Arc Thru And Crossfire
    • Features 60k V Rated Alkyd Compound
    • Brass Terminals Inserts And Steel Rotor Springs
    • High Spark Energy Flow
    See More

    PerTronix – D700700 Advance Spring Kit Flame-Thrower Billet Distributor (Part No.D700700)

    D700700 Advance Spring Kit Flame-Thrower Billet Distributor

    from

    $20.99
    Performance mechanical advance springs.

    Product Features:
    • PerTronix D700700 Advance Spring Kit Flame-Thrower Billet Distributor
    • Performance mechanical advance springs.
    See More

    PerTronix – D660701 Rotor Flame-Thrower Billet Distributor (Part No.D660701)

    D660701 Rotor Flame-Thrower Billet Distributor

    from

    $18.99
    Rotor for Flame-Thrower cast distributors. Premium rotor with brass contact

    Product Features:
    • PerTronix D660701 Rotor Flame-Thrower Billet Distributor
    • Rotor for Flame-Thrower cast distributors
    See More

    MSD Ignition – Distributor Cap; Ford HEI; Black (Part No.84083)

    Distributor Cap; Ford HEI; Black

    from

    $61.19
    All the quality and performance you’ve come to expect from MSD is now available in black. Our customers have requested black parts for their builds so we’ve answered with the addition of several black distributor caps and cap and rotor kits. The black parts are built to the exact specifications of the traditional MSD red components. If you’re looking to change up the look under the hood of your street machine, off-road rig or race car; check out the complete line of MSD black components.

    Product Features:
    • Injection Molded From DuPont Rynite Material
    • Extreme strength; high dielectric properties
    • Designed with performance in mind
    • High quality; voltage insulating material
    • Brass terminals
    • Black in color
    See More

    PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)

    D4061 Flame-Thrower HEI Distributor Rotor Red

    from

    $15.99
    Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

    Product Features:
    • Made from hi-performance 60 KV rated alkyd molding compound.
    • Cap and rotor kits include nylon rotor hold-down screws.
    • Flame-Thrower dust covers provide a larger air gap around the coil.
    See More

    MSD Ignition – Distributor; Ford V8; 302 (Part No.8582)

    Distributor; Ford V8; 302

    from

    $438.99
    MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001″. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.

    Product Features:
    • CNC machined billet aluminum housing and DuPont Rynite base
    • Supplied w/Cap-A-Dapt and rotor (accepts MSD socket style caps)
    • Must Be Used w/An MSD Ignition Control
    • Mech. advance assem. can be locked out for crank trigger systems
    • Nylon pads ensure smooth operation of the advance weights
    • Advance weight pins are staked and tig welded to the plate
    • Advance plate and weights are fine blanked from chrome moly steel
    • QPQ coated for friction reduction
    See More

    MSD Ignition – Distributor; Ford 289/302; Ready-to-Run; with Steel Gear (Part No.83521)

    Distributor; Ford 289/302; Ready-to-Run; with Steel Gear

    from

    $664.99
    MSD’s Ready-to-Run Ford distributors are the perfect upgrade for bulky Duraspark systems or ancient breaker point models. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 In. smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pick-up is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD race rotor you’ll find MSD’s accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs. Plus, there is a vacuum advance canister to increase economy on long drives.

    Product Features:
    • Equipped w/Steel Gear
    • CARB E.O. Approved
    • Does not require an MSD Ignition Control
    • Supplied w/small dia. cap w/HEI style terminals; race and rotor
    • Will accept PN[8441] Cap-A-Dapt
    • Nylon pads ensure smooth operation of the advance weights
    • Advance weight pins are staked and tig welded to the plate
    • Mech. advance assem. can be locked out for crank trigger systems
    See More

    MSD Ignition – Distributor; Ford 289/302; Ready-to-Run (Part No.8352)

    Distributor; Ford 289/302; Ready-to-Run

    from

    $569.99
    MSD’s Ready-to-Run Ford distributors are the perfect upgrade for bulky duration systems or ancient breaker point models. These distributors come complete and Ready-to-Run. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 In. smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pick-up is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD race rotor you’ll find MSD’s accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs.

    Product Features:
    • Now includes built-in Rev Limiter
    • Built-in module produces a 7.5 amp single spark through high rpm
    • Easy-to-adjust mech. advance w/supplied springs and stop bushings
    • Vacuum advance canister for improved economy (can be locked out)
    • CNC machined billet aluminum housing and billet aluminum base
    • Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
    • Maintenance-free magnetic pickup and precision reluctor
    • Creates stable trigger signals throughout the rpm range
    • Polished steel shaft is guided by a sealed ball bearing
    • Advance plate and weights are fine blanked from chrome moly steel
    • QPQ coated for friction reduction
    • Mech. advance assem. can be locked out for crank trigger systems
    See More

    MSD Ignition – Distributor; Ford 302; Pro-Billet; Small Cap (Part No.8579)

    Distributor; Ford 302; Pro-Billet; Small Cap

    from

    $399.99
    MSD engineers fit all of their high performance distributor experience into a special compact housing designed to be less obtrusive for Ford engines. The diameter of the special cap and housing are 5/8 inch smaller than stock Ford distributors providing extra room in front of the engine. The new MSD cap features spark plug style terminals and is firmly screwed down to the housing. The distributor relies on MSD’s race proven magnetic pick-up and precision reluctor to deliver accurate trigger signals to the MSD ignition throughout high rpm. The reluctor assembly is turned by a hardened steel shaft which rides in a sealed ball bearing for high rpm stability and endurance. Mounted to the top of this shaft is a fully adjustable mechanical advance assembly. The rate at which the chromoly assembly advances the timing is easily controlled by changing the supplied advance springs and stop bushing for total advance.

    Product Features:
    • Billet housing 5/8 in. smaller dia. than stock Ford distributors
    • Must Be Used w/An MSD Ignition Control
    • Supplied w/small dia. cap w/HEI style terminals; race and rotor
    • Will accept PN[8441] Cap-A-Dapt
    • Nylon pads ensure smooth operation of the advance weights
    • Advance weight pins are staked and tig welded to the plate
    • Mech. advance assem. can be locked out for crank trigger systems
    • Advance plate and weights are fine blanked from chrome moly steel
    See More

    Mallory – Distributor Drive Gear (Part No.29432)

    Distributor Drive Gear

    from

    $103.99
    Mallory distributor gears are precision machined from alloy steel in our factory to exact original equipment specs. For use with cast flat tappet hydraulic/mechanical cams and austempered ductile iron roller cams.

    Product Features:
    • Replacement Distributor Gear
    See More

    Mallory – Distributor Drive Gear (Part No.29421PD)

    Distributor Drive Gear

    from

    $73.29
    Mallory distributor gears are precision machined from alloy steel in our factory to exact original equipment specs. For use with cast flat tappet hydraulic/mechanical cams and austempered ductile iron roller cams.

    Product Features:
    • Replacement Distributor Gear
    See More

    PerTronix – D4062 Flame-Thrower HEI Distributor Rotor Blue (Part No.D4062)

    D4062 Flame-Thrower HEI Distributor Rotor Blue

    from

    $15.99
    Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

    Product Features:
    • Made from hi-performance 60 KV rated alkyd molding compound.
    • Cap and rotor kits include nylon rotor hold-down screws.
    • Flame-Thrower dust covers provide a larger air gap around the coil.
    See More

    PerTronix – D4260 Flame-Thrower Distributor Rotor HEI/EST Black (Part No.D4260)

    D4260 Flame-Thrower Distributor Rotor HEI/EST Black

    from

    $10.99
    Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

    Product Features:
    • Made from hi-performance 60 KV rated alkyd molding compound.
    • Cap and rotor kits include nylon rotor hold-down screws.
    • Flame-Thrower dust covers provide a larger air gap around the coil.
    See More

    Most Sold 1991 Ford Thunderbird Performance Ignition Products

    Explore our best-selling Ford parts for the 1991 Thunderbird among 6 OEM and aftermarket options starting from $30.49.

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Accel – Ford 1984-98 Eec-Iv Supercoil (Part No.140012)

    Ford 1984-98 Eec-Iv Supercoil

    from

    $77.99
    Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper throttle response. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

    Product Features:
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Standard Motor Products SMP Fd-478
    • MSD 5527
    • Standard Motor Products SMP Fd-478
    • MSD 5527
    • Resists Shock And Vibration
    • Resists Corrosion
    See More

    Accel – Ford Tfi Mdltr 84-93 W/Grease (Part No.35369)

    Ford Tfi Mdltr 84-93 W/Grease

    from

    $103.99
    This high performance ignition module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most Ford Thick Film Ignition systems. 1984 thru 1993.

    Product Features:
    • Fits Most Stock And Modified Distributors
    • Dwell Control Circuit
    • Resists False Triggering
    See More

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $30.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More

    MSD Ignition – Crank Trigger Kit; Small Block Ford (Part No.8640)

    Crank Trigger Kit; Small Block Ford

    from

    $593.99
    For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

    Product Features:
    • Absolutely The Most Accurate Way To Trigger The Ignition
    • The non-magnetic pickup cannot be false triggered.
    • Powerful magnets are embedded in a billet aluminum trigger wheel.
    • Incl. brackets/mounting hardware to fit a variety of engines
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    Top-Rated Performance and Racing Products Brands For Your 1991 Ford Thunderbird

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1991 Ford Thunderbirds. Below you’ll find some of our best rated Performance and Racing Products from Mr. Gasket, FEL-PRO Performance, and Accel, and more. Performance and Racing Products from these brands that fit a 1991 Thunderbird start at just $19.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular Mr. Gasket 1991 Ford Thunderbird Performance and Racing Products

    When it comes to maintaining or upgrading your 1991 Ford Thunderbird, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mr. Gasket ticks all of those boxes. We offer a wide selection of Mr. Gasket Performance and Racing Products, specifically designed for the 1991 Ford Thunderbird. With over 16 Mr. Gasket brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $19.99, with an average price of just $50.43. Plus, with over 23 customer reviews and an average rating of 4 stars, you can trust that our Mr. Gasket Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Remote Oil Filter Kit
    from
    $97.99
    This product is not rated

    Remote Oil Filter Kit

    “”

    Thermocap Radiator Cap
    from
    $48.09
    This product is not rated

    Thermocap Radiator Cap

    “”

    Precision Timing Tape
    from
    $21.79
    This product is not rated

    Precision Timing Tape

    “”

    Popular FEL-PRO Performance 1991 Ford Thunderbird Performance and Racing Products

    FEL-PRO Performance auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1991 Ford Thunderbird owner should feel confident when installing genuine FEL-PRO Performance parts in their vehicle. To ensure the best fit and performance for your 1991 Thunderbird, Advance Auto Parts carries a full inventory of 7 FEL-PRO Performance Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these FEL-PRO Performance Performance and Racing Products range from $33.99 to $55.99, plus, with more than 7 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

    Engine Crankshaft Seal Kit
    from
    $48.99
    This product is not rated

    Engine Crankshaft Seal Kit

    “”

    Exhaust Manifold Gasket Set
    from
    $45.99
    This product is not rated

    Exhaust Manifold Gasket Set

    “”

    Exhaust Manifold Gasket Set
    from
    $39.99
    This product is not rated

    Exhaust Manifold Gasket Set

    “”

    FAQs for 1991 Ford Thunderbird Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1991 Ford Thunderbirds?

    Out of 99 Performance and Racing Products that fit 1991 Ford Thunderbirds, the following parts are the top sellers:

    What’s the price range for 1991 Ford Thunderbird Performance and Racing Products?

    Performance and Racing Product prices for the 1991 Ford Thunderbird start at $9.99 and go up to $1,170.00 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1991 Ford Thunderbird?

    The average price for Performance and Racing Products for the 1991 Ford Thunderbird is $245.97. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Ford Thunderbird model years?

    Yes, we currently carry Performance and Racing Products for 46 model years of Ford Thunderbirds between 1955 and 2005. Performance and Racing Products are bought most frequently for the following model years: 2005, 2004, 2003, 2002, 1997, 1996, 1995, 1994, and 1993.

    What are the cheapest Performance and Racing Products for my 1991 Ford Thunderbird?

    The cheapest 1991 Ford Thunderbird Performance and Racing Products we carry in stock are:

    Can I get help with 1991 Ford Thunderbird Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.

    What is your return policy for Ford Thunderbird Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Ford Thunderbird Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.