1991 Ford F-350 Belts and Hoses
More 1991 Ford F-350 Belts and Hoses Categories
If you’re looking for an original Belts and Hoses replacement for a 1991 Ford F-350, you can search through our selection below. You’ll also find aftermarket and OEM Belts and Hoses to meet your needs.
Essential 1991 Ford F-350 Belts and Hoses
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.50" Diameter (Part No.B70677)
from
$12.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25478)
from
$16.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Dayco – Dayco, Acc. Belt Tensioner Assy, Automatic (Part No.G60011221864DAY)
from
$66.30
Dayco, Acc. Belt Tensioner Assy, Automatic
Litens – Serpentine Belt Tensioner: 1 Piece (Part No.999006A)
from
$81.99
This Litens aftermarket part is designed and engineered by one of the world’s largest supplier of Original Equipment (O.E.) tensioners. While the appearance is slightly different from the original equipment part, the Litens part maintains Ford Truck/Van original form, fit, and function specifications .Note: the Litens design maintains the original internal damping components as well as a flanged pulley to assist in drive belt alignment throughout the life of the product. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 1.50" Diameter (Part No.D70501)
from
$10.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Gates – Premium Molded Coolant Hose (Part No.22417)
from
$44.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Litens – O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 94 mm Diameter (Part No.900060A)
from
$36.49
This pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Canada to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel pulley preassembled on a steel mounting bracket. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Litens – O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 94 mm Diameter (Part No.900048A)
from
$28.99
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Dorman – Fuel Filler Neck Hose (Part No.573-034)
from
$51.99
Fuel filler neck leaking? This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.
Product Features:
See More
Product Features:
- Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles
- Durable construction – made of fuel-resistant materials to reduce future failure potential
- Regulatory compliant – built to meet emission and inspection standards
- Trustworthy value – backed by team of engineers and quality control experts in the United States
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 39 1/4 Inch Length (Part No.87645)
from
$24.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Gates – Safety Stripe« Standard Straight Heater Hose (Part No.28409)
from
$2.49
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Dorman – Help – Heater Hose Connector 3/4 In. Tube x 5/8 In. Hose (Part No.47164)
from
$14.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.
Product Features:
See More
Product Features:
- Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
- Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
- Cost-effective solution – offers original equipment quality at competitive price
- Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Dorman – Heater Hose Connector (Part No.800-404)
from
$15.49
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.
Product Features:
See More
Product Features:
- Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
- Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
- Cost-effective solution – offers original equipment quality at competitive price
- Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Yukon Gear – Seal Puller Tool (Part No.56063)
Driveworks – Poly Rib Belt Serpentine Belt; 27.24 Long, 6 Rib Count (Part No.41013)
from
$5.49
Dayco engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality… it delivers the solution to troublesome drive problems. Dayco Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.
Product Features:
See More
Product Features:
- Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
- No-Noise Advanced Design EPDM rubber compound for quiet extended life
Gates – Automotive XL« High Capacity V-Belt (Part No.9500)
from
$29.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Gates – Automotive XL« High Capacity V-Belt (Part No.9465)
from
$32.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Dayco – Poly Rib Belt Serpentine Belt; 97.05 Long, 6 Rib Count (Part No.5060970)
from
$60.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 99.625" Long, 6 Rib Count, Exact Fit (Part No.K060990HD)
from
$73.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at prolonged extreme operating temperatures
- Heavy-duty construction resists cracking and wear, even at extreme temperatures
- Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
- Problem solver designed for the toughest applications
- Consistently outperforms other heavy-duty serpentine belts on the market
- Engineered to save your fleet money and reduce downtime
- Tensioner Replacement is Recommended (if equipped)
Dayco – Poly Rib Belt Serpentine Belt; 98.03 Long, 6 Rib Count (Part No.5060980)
from
$61.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)
from
$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)
from
$79.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 90mm Dia., 31mm Width, Smooth (Part No.89001)
from
$20.79
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
Product Features:
See More
Product Features:
- Designed for the majority of automotive vehicle applications on the road today
- High-quality materials help resist wear and improve belt life
- Features premium lubricated bearings to extend service life
- Meets or exceeds OE quality
Dayco – V-Belt Assy. Idler/Tensioner Pulley; Steel, 94mm Dia., 19.3mm Width, Grooves (Part No.89025)
from
$30.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong pl
Product Features:
See More
Product Features:
- Designed for the majority of automotive vehicle applications on the road today
- High-quality materials help resist wear and improve belt life
- Features premium lubricated bearings to extend service life
- Meets or exceeds OE quality
Dayco – V-Belt Idler/Tensioner Pulley; Steel, 94mm Dia., 16.4mm Width, Grooves (Part No.89020)
from
$24.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong pl
Product Features:
See More
Product Features:
- Designed for the majority of automotive vehicle applications on the road today
- High-quality materials help resist wear and improve belt life
- Features premium lubricated bearings to extend service life
- Meets or exceeds OE quality
Popular 1991 Ford F-350 Belts and Hoses Categories
1991 Ford F-350 Belts and Hoses
You count on your 1991 Ford F-350 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 38 Belts and Hoses ranging in price from $1.49 to $82.99, you’re sure to find everything you need for your 1991 Ford F-350.
Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 11 different brands like Dayco, DriveWorks, and Gates. 1991 Ford F-350 Belts and Hoses start as low as $1.49!
One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 1,185 extensive product reviews on 1991 Ford F-350 Belts and Hoses. Some of the top-rated Belts and Hoses products we carry are Poly Rib Belt Serpentine Belt; 98.03 Long, 6 Rib Count with 4.2 stars and Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.75" Diameter with 4.8 stars.
Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 1991 Ford F-350 below to get started!
Top-Rated Belts and Hoses Brands For Your 1991 Ford F-350
Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1991 Ford F-350 running right for years to come. In our inventory you’ll find brands like Dayco, DriveWorks, Gates, and even more.
Popular Litens Belts and Hoses
You’ll find popular Litens brand products across Pulleys and Belt Tensioners. All are waiting to get your 1991 Ford F-350 back on the road. Some of the top-rated Litens products in these categories are:
from
$19.99
(1)
O.E Quality Idler/Tensioner Pulley Direct Fit, Thermoplastic, 90 mm Diameter
Idler Pulleys
Top-Rated Dayco Belts and Hoses
If Dayco are what you’re looking for, our inventory holds plenty. We stock Dayco brand Belts and Hoses for your 1991 Ford F-350, and some of our most reviewed Dayco parts include:
from
$20.79
(41)
Serpentine Idler/Tensioner Pulley; Polymer, 90mm Dia., 31mm Width, Smooth
Drive Belt Idler Assemblies
FAQs for 1991 Ford F-350 Belts and Hoses
What are the most purchased Belts and Hoses for the 1991 Ford F-350?
Out of 38 Belts and Hoses for the 1991 Ford F-350, the most popular in our inventory are:
from
$82.99
(9)
Serpentine Belt Tensioner: 1 Piece, Built To Outperform And Outlast OE Parts
Belt Tensioner Assemblies
What are the top-rated 1991 Ford F-350 Belts and Hoses?
Top-rated Belts and Hoses for your 1991 Ford F-350 based on customer reviews/ratings are:
from
$28.99
(8)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.75" Diameter
“Fit great and seems to be a good hose.”
from
$15.49
(6)
Heater Hose Connector
“Used 2 connectors each when replacing blend door – one 5/8″ and one 3/4″. Had to cut factory hose and attach to connector with a normal hose clamp. ”
