Name: Steering Tie Rod End
Brand: Driveworks
SKU: DW-ES140R
Price: 17.29 USD

from

$17.29

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

Forged housing from specific materials provides strength and durability to prevent breakage
Coated technology provides a smooth and durable surface to prevent corrosion and rust
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
A slotted nut and cotter pin for a more secure installation

from

$31.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$53.99

OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.

from

$124.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$151.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Powdered metal gusher bearing design enables grease to flow through bearing
Engineered steel composition results in a stronger component
Full ball metal stud provides 360 Degrees of smooth, consistent, rotational movement resulting in more responsive steering
Loose or worn chassis parts can lead to premature tire wear
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$20.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$9.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$27.49

OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.

from

$235.30

A1 CARDONE Remanufactured Steering Gears are the component within a car’s steering system that guides the wheel’s movement in conjunction with the direction that the steering wheel is rotated, helping achieve ideal steering response for more efficient driving. The micro-finished surfaces of it’s shafts are precision-designed to provide a smoother drive, while the factory-set Pitman shaft transmits the motion it receives from the gear box by moving the wheels left or right to turn the wheels. OEM grade O-rings and seals are used and meet required specifications, providing you a quality product both you and your vehicle can rely on.

Product Features:

100% computerized hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function
100% new O-rings and lip seals ensure no leaking and long-lasting performance
All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability
Units are supplied with 100% tested and calibrated pressure relief valves for guaranteed performance
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life
Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$61.86

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Idler Arm is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.
Acoustic measurements to ensure driver comfort
Strength tests for durability
Environmental resistance tests for all weather conditions
Wear and drive tests
Assembly technique testing of all critical safety features
Dynamic testing of complete units to ensure leak free performance
Extensive on-road testing at TRW tracks around the world

from

$52.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

DESIGN CHANGE ┐ New and improved follower ball joint design to extend product life and simplify installation
PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$11.99

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
Wrench flats at the base of the stud allow for the use of sockets for easy installation

from

$55.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$21.49

Driveworks Brand tie rod adjusting sleeves are high-quality, cost-effective parts. Replace tie rod adjusting sleeve to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts promote improved steering response and du

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability

from

$36.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$21.79

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Complete with clamps
Used to set Toe in or out
replaces rusted or corroded sleeves
Used to connect inner and outer tie rod ends

from

$28.55

The ISG Ball Joint is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$11.49

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Atermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$31.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$90.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$159.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$27.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$55.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$23.29

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Incorporates proven design and engineering features

from

$384.99

Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.

from

$29.99

This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$31.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.