1990 Pontiac Firebird Performance and Racing Products

Name: Control Arm Bushing Set
Brand: Energy Suspension
SKU: 3.3157R
Price: 73.99 USD

Below you will find various in-demand Pontiac Performance and Racing Products, components and accessories for your 1990 Firebird. Advance Auto Parts has popular Firebird parts like Performance Distributors, Performance Fuel Systems, Performance Oil Filters and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Firebird model years including 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 and more. Select a category of 1990 Pontiac Firebird Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1990 Pontiac Firebird Performance and Racing Products Categories

Performance Oil Filters

Performance Engine Coolant Thermostats

Performance Intake Manifolds

Performance Fuel Pumps

Performance Coils

Performance Exhaust Mufflers

Performance Distributor Cap and Rotor Kits

Performance Exhaust Headers

Performance Shifters

Performance Distributors

Performance Transmission Dipstick Tubes

Performance Valve Covers

Performance Exhaust System Kits

Performance Water Outlet Gaskets

Performance Throttle Bodies

Performance Engine and Transmission Mounts

Performance Engine Water Pumps

Performance Radiator Caps

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Engine Harmonic Balancers

Performance Distributor Components

Performance Engine Valve Springs

Performance Engine Valve Cover Gasket Sets

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Posi Units and Components

Performance Timing Covers and Tabs

Performance Exhaust Tail Pipes

Performance Upper Performance Control Arm Bushings

Performance Distributor Caps

Performance Engine Rocker Arms

Performance Exhaust Header Hardware

Performance Engine Camshafts

Performance Engine Oil Pan Gaskets

Performance Ring and Pinions

Performance Ignition Parts

Performance Exhaust Pipes

Performance Torque Arm Bushings

Performance Intake Manifold Hardware

Performance Sway Bar Link Kits

Performance Lower Control Arm Bushings

Performance Engine Valve Lifters

Performance Sway Bar Bushings

Performance Engine Main Bearing Gasket Sets

Performance Tie Rod End Boots

Performance Engine Cylinder Head Installation Kits

Performance Ball Joint Boots

Performance Engine Push Rods

Performance Torque Converters

Performance Engine Cylinder Heads

Performance Nitrous Systems

Essential Performance and Racing Products for 1990 Pontiac Firebirds

from

$73.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$170.99

Constructed of thicker than stock steel plate to withstand the stress of high stall speed converters and high RPM engine. Zinc dichromate plated to resist rust and corrosion. Meets SFI specification 29.1 for racing.

Product Features:

Thicker Than Stock Steel Plate
Ring Gear Securely Welded
Dual Bolt Patterns
Zinc-Dichromate Plated To Resist Corrosion
Withstands High Torque and RPM

from

$33.99

Flame Thrower Street/Strip distributors have a speciallFlame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM

Product Features:

Premium quality wire harness and capacitor.
Insure good connection and “static free” operation.

from

$75.99

These are high quality nuts with allen set screws to provide you with that positive lock needed for Race or original equipment Rocker Arms.

Product Features:

They Are Zinc Dichromate Plated Steel
They Have Black Oxide Coated Set Screws
Keeps Rocker Arms Positively Locked
(16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
Includes Locks and Hex Wrench
Shank O.D. .603″

from

$55.99

Product Features:

IMPROVED FLOW CAPACITY: Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM: Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES: Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS: Made from aluminized steel for durability and long life
BETTER TOGETHER: Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$232.99

Product Features:

OE IN-Tank Upgrade Pumps
Ideal For Supporting Performance Improvements
Replace Original Pump Exactly
Include All Necessary Hardware
Easy Installation

from

$457.99

Edelbrock #8827 Water Pump small block Chevy cartridge style race ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooling

Product Features:

Standard Impeller Rotation
0.750 in. Pilot Shaft
0.750 in. Ball/Ball Bearing
5.8125 in. Block To Hub Height
Satin Finish

from

$255.99

Product Features:

Ideal For Connecting Headers
Use With FLOWTECH Headers

from

$32.49

Secure the harmonic balancer or dampener on your Chevy. Works on original equipment, high performance street, drag or circle track applications. Features a heat treated black oxide coated Grade 8 alloy steel bolt for strength with a tall hex head to prevent wrench from slipping. An extra thick parallel ground washer provides accurate, uniform torque, and a lock washer is also included.

Product Features:

Heat treated black oxide coated Grade 8 alloy steel
Tall hex head bolt to prevent wrench from slipping
Extra thick parallel ground washer provides accurate, uniform torque
Washers Provides More Accurate And Uniform Torque
Grade 8 Alloy Steel

from

$79.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$10.49

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Lasts Longer
Looks Great

from

$201.99

Edelbrock part #9653 Pushrods are designed for Chevy 348/409 “W” series V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precis

Product Features:

7.2 in. Length
0.312 in. Diameter
4130 Chromoly Steel Material
Black Oxide Finish
Made In The USA

from

$306.99

Reverse lockout meets NHRA and IHRA requirements. Includes neutral safety switch, backup light switch, black T-Handle. Fits most 3 Speed applications.

Product Features:

Base Trims To Custom Fit Floor
NHRA/IHRA Reverse Lockout Meets Requirements
Includes Neutral Safety Switch
Includes Backup Light Switch
Includes Black T-Handle and Cable

from

$24.79

Product Features:

Reduces Wheel Hop in Acceleration
Prevents Shudder under Braking
Adds Greater Handling Control

from

$17.79

Dowel pins are precision machined and case hardened for accurate head alignment. Two per set. 5/16 inch x 5/8 inch

Product Features:

Precision Machined
Case Hardened
Give Accurate Alignment
2 Per Set

from

$139.99

Talk about a smooth operator, this Holley airfoil kit easily adapts to the stock GM throttle body on Chevrolet 5.7L TPI and LT1 engines used on Camaros and Firebirds. It acts to smooth out and minimize the turbulence of the incoming flow of air into the throttle body. The September, 2002 edition of GM high-tech performance magazine reported a 5.8 horsepower increase after installing this Holley airfoil kit on a stock 1994 Camaro Z28 LT1. Installation is easy; simply snap it into place in the mouth of the throttle body and it’s ready to work. Made from space age elastomer, the Holley airfoil will perform effectively and unobtrusively for years.

Product Features:

Smoothes and Minimizes Turbulence
Increased Airflow
Creates More Horsepower
Easy Installation
Made From Space Age Elastomer
Effective And Unobtrusive
Long Lasting

from

$53.99

Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Product Features:

Indicates Coolant Temperature
Helps to Prevent Injuries from coolant or steam burns
Integrated Coolant Reclamation Valve
Improves Underhood Appearance
Fahrenheit and centigrade readings
Various valve pressures available

from

$18.29

These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Product Features:

Grade 5 socket head bolts are zinc plated for protection and appearance
Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
Washers Included

from

$37.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
Not intended for use in emission controlled vehicles.

from

$20.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$54.99

Product Features:

Heavy Duty Cap and Rotor Kit
With Brass Inserts

from

$1178.99

Product Features:

Easy Way To Serious Power
For Electronic Fuel Injection
Engineered For Exact Application
Compatible With OEM Equip.
Will Not Affect Day-To-Day Drive
Will Not Affect Fuel Economy
Easy To Install

from

$26.99

Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.

Product Features:

Chrome Plated Steel
F-Style
Heavy Gauge Steel Construction
Fits Small Block Chevy 265-400 CID
Must Be Used With Part 9852

from

$124.99

Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:

For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

from

$245.99

Product Features:

Fuel Economy From The Engine
Leak Test For Max Performance
Mandrel-Formed Power Plenum
Leakproof O-Ringed Port Seals
Include All Mounting Hardware

from

$159.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

Complete Kit: Includes Retainers And Locks
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Includes Superior Quality Steel Retainers
Includes 7 deg. Heat-Treated Valve Stem Locks
Retainers and Locks Black Oxide Coated
Non-Rotator Style: Dyno Tested and Street Proven
Great Match to Edelbrock Camshaft Kit

from

$26.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
With steel core to provide ultimate excellent blowout resistance.
Not intended for use in emission controlled vehicles.

from

$562.99

HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) Application: HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

Upgrade your 1990 Pontiac Firebird with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1990 Pontiac Firebird, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Performance and Racing Products are key to keeping your Firebird functioning at its best. At Advance Auto Parts, we offer a wide selection of 177 Performance and Racing Products for the 1990 Pontiac Firebird, designed to meet your needs without breaking the bank. From Performance Distributor replacements to Performance Fuel Systems upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1990 Pontiac Firebird at great prices. Our Performance and Racing Products inventory for this model ranges from just $5.99 to $1,214.00, with an average price of $278.50. Our 177 Performance and Racing Products in stock come from 21 trusted brands, so you’re sure to find the right part for your 1990 Pontiac Firebird without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1990 Pontiac Firebird, we stock popular OEM and aftermarket Performance and Racing Products from top names like FEL-PRO Performance, MSD Ignition, B & M, and more. FEL-PRO Performance Performance and Racing Products start at just $31.49 and boast an impressive 4.2 stars average rating from customers. MSD Ignition and B & M also bring quality to the table, with Performance and Racing Products available starting at $54.99, and at an average 4.2 stars rating. With 1,995 customer reviews and counting, our 1990 Pontiac Firebird Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1990 Pontiac Firebird is always ready to roll. We’re committed to providing you with everything you need to keep your Firebird in top shape, all in one place. Start shopping confidently below for your 1990 Pontiac Firebird!

Best-Selling Performance Distributors for 1990 Pontiac Firebirds

Enhance the driving experience in your Pontiac with 13 quality Performance Distributor components, starting at $11.99.

show more show less

from

$28.99

Precision machined chromoly weights and center plate.
Designed to eliminate erratic timing.
Includes three sets of springs.
Complete installation instructions make recurving your distributor easy.

from

$54.99

The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

Product Features:

Fits stock distributor
High quality material
Brass terminals
High dielectric properties

from

$53.99

Chevrolet V8 engines with HEI/EST remount mount coil 8132 35362 applications include 1987-93 Cars and 1987-95 Trucks (Supersedes 60110).

Product Features:

Features Protection From Arc Thru And Crossfire
Features 60K V Rated Alkyd Compound

from

$233.99

Performance Replacement HEI Distributor, direct plug-in with OE type connectors, GM HEI equipped Cars, Trucks (Pre-Computer). High dielectric strength cap, brass male towers. ACCEL Performance Replacement Distributors are the perfect choice for your daily driver or street machine. Using all new components, these distributors feature High-performance ACCEL Electronics. All new components-housings are either new castings or turned from billet stock, centerless ground shaft with oil lite bushings. High dielectric strength cap, balanced rotor. Male tower distributor cap with brass cap and rotor contacts (Ford and AMC Models feature screw-mounted wire retainer for the ultimate plug wire retention). Iron or steel distributor gear. Direct plug-in replacement with factory-type connectors for plug and play installation.

Product Features:

Direct Plug In Factory Replacement Plug And Play
CNC Machined 6061 T6 Billet Aluminum Housing
High Dielectric Strenght Thermoplastic Cap With Br
4 Topin Module With Dwell Control Triggers At 75 R
Easy Access Fully Adjustable Mechanical Advance
Adjustable Vacuum Advance
Includes Performance Coil
Fit non computerized vehicles

from

$33.99

Premium quality wire harness and capacitor.
Insure good connection and “static free” operation.

from

$195.99

Distributor Cap And Rotor Kit

from

$88.99

With the introduction of our 20 Amp extreme HEI module, we needed an HEI cap and rotor that could withstand the high output. The answer was to mold our own HEI cap, rotor and coil cover. The cap and rotor will fit our HEI Pro-Billet distributor, PN 8365.

Product Features:

Designed w/performance in mind
High quality; voltage insulating material
Stainless Terminals
High dielectric properties

from

$60.99

This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:

Increased outer hardened layer thickness (RC 55-60)
Micro Polished Surface For Smooth Contact
Proprietary formulated ductile iron.
Melonite QPQ coated reduces friction and initial wear
Interstitial carbide improves wear resistance/running properties

from

$17.99

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$665.99

The Chevrolet HEI distributor is a favorite for muscle cars, street rods and even circle track racers. The integrated coil keeps under mount wiring clean, and for race cars, the idea of running one wire to the distributor keeps things simple. However, when it comes to performance, the stock HEI falls short. MSD answers the need for a strong, accurate and high performance HEI with our Pro-Billet HEI. The distributor is supplied with our digital HEI module and coil so there is plenty of spark energy combined with improved dwell and timing control. Tig welded on top of the distributor shaft is MSD’s adjustable centrifugal advance assembly. Three sets of springs and four stop bushings let you dial in up to 24 different timing curves to match your driving needs. Plus, there’s a vacuum advance for those concerned with economy. All of this is assembled around a precision and great looking CNC machined housing.

Product Features:

Complete performance HEI distributor upgrade for Chevy V8 engines
Supplied w/Brass Terminal Distributor Cap And Rotor
Full Spark Energy Output To 9000 Rpm
An 8.5 amp; single spark; inductive discharge ignition module
Includes MSD PN[83647] and MSD HEI Coil PN[8225]
Special oil tract improves lubrication to the dist./cam gear
Nylon pads ensure smooth operation of the advance weights
Advance weight pins are staked and tig welded to the plate

from

$511.99

GM late-model performance enthusiasts will be happy to see this Pro-Billet distributor. The distributor, PN 8366, is a drop-in. Replacement for GM V8s using the small cap distributor with a dual connector coil found in cars from 1987-1993 and trucks from 1987 to 1995. The entire housing is CNC-machined to exact tolerances for incredible strength (Not to mention cool looks). For improved lubrication there is an extra oil tract machined into the bottom of the housing that delivers oil directly to the cam and distributor gears. Inside, a polished steel shaft receives guidance from a sealed ball bearing and an extra-long sintered bushing adds stability. This 0.500 In. shaft also receives a QPQ coating for increased friction reduction and corrosion resistance. A factory-style ignition module is supplied with the distributor so your factory wiring will plug directly in triggering this module is the responsibility of a high output magnetic pick-up.

Product Features:

Drop-in billet replacement for GM dist. w/small cap/external coil
Factory style ignition module accepts factory wiring
CNC machined billet aluminum housing and billet aluminum base
Maintenance-free magnetic pickup and precision reluctor
Oversized steel shaft is QPQ coated
Guided by sealed ball bearing and an extra long sintered bushing
Special oil tract improves lubrication to the dist./cam gear
O-ring seals can be installed for oil press. control (Mods only)
Supplied w/Late Model Distributor Cap And Rotor
Legal to install in all 50 states

from

$17.99

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$11.99

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

Top Picks for 1990 Pontiac Firebird Performance Oil Filters

Upgrade Pontiac Firebirds with top-quality Performance Oil Filters parts, including 1 OEM and aftermarket selections for your 1990 model.

show more show less

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Product Features:

Designed to allow high flow rates and a consistent flow of oil to your engine
Pleated synthetic-blend filtration media removes most harmful contaminants
Fast and easy Wrench-Off removal using the welded one-inch hex nut
High capacity to withstand the service intervals recommended by vehicle manufacturers
Heavy-duty canister for outstanding durability
Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
Designed to operate with all synthetic, conventional, and blended motor oils
1-Year Limited Warranty

In-Demand Performance Engines for 1990 Pontiac Firebirds

Select from 97 premium Performance Engines parts for your 1990 Pontiac Firebird, with prices ranging from $9.99 to $1,214.00.

show more show less

from

$9.99

This is a high quality gasket that will seal that leaking water neck, and provide you with years of service. This gasket works well in all applications.

Product Features:

Made From Cellulose/Nitrile Composition
Provides Excellent Sealing And Durability
These Gaskets Are Die Cut For a Precision Fit
Fits Small Block Chevy V8 Engines 1955-’90
Fits Big Block Chevy V8 Engines 1965-’90
Fits Small Block Chrysler 318/360 1979-’92
Fits Small Block Chrysler 3.9L/5.2L/5.9L Magnum 1992-’03

from

$42.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$44.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

from

$31.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$159.99

Complete Kit: Includes Retainers And Locks
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Includes Superior Quality Steel Retainers
Includes 7 deg. Heat-Treated Valve Stem Locks
Retainers and Locks Black Oxide Coated
Non-Rotator Style: Dyno Tested and Street Proven
Great Match to Edelbrock Camshaft Kit

from

$23.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Die cut silicone rubber gaskets conform to out-of-flat covers
Great for on-again/off-again situations
Not intended for use in emission controlled vehicles.

from

$35.49

Edge molded rubber water outlet gasket is reusable, great for engines that require regular disassembling for maintenance. Incorporates solid aluminum carrier for strength and rigidity. Can be used with OE replacement or aftermarket chrome water outlets. Requires no gasket sealer.

Product Features:

Edge Molded Rubber Water Outlet Gasket Is Reusable
Requires No Gasket Sealer
Solid Aluminum Carrier For Strength/rigidity
Reusable – Ideal for Engines That Are Frequently Taken Apart & Reassembled

from

$914.99

SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.

Product Features:

Cam and lifter kit for Small Block Chevy engines
CL-Kit includes cam, lifters, assembly lube, instructions and decals
HYDRAULIC – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
295/313 Advertised Duration, 243/257 Duration @ .050″, .500″/.486″ Lift, 107 Lobe Separation
Valve spring upgrade required

from

$898.99

SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – High Energy: Good street performance with stock converter, choppy idle. OR High Energy Marine: Biggest cam for inboard/outboard. Good for ski, economy and light performance.

Product Features:

Cam and lifter kit for Small Block Chevy engines
CL-Kit includes cam, lifters, assembly lube, instructions and decals
HYDRAULIC – High Energy: Good street performance with stock converter, choppy idle. OR High Energy Marine: Biggest cam for inboard/outboard. Good for ski, economy and light performance.
268/268 Advertised Duration, 218/218 Duration @ .050″, .454″/.454″ Lift, 110 Lobe Separation
Valve spring upgrade required

from

$255.99

Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

Product Features:

Twisted Snout Water Pump Design For Updated Style
Street Performance
Heavy Duty Shaft w/5/8 in. Pilot
Six-Blade Stamped Steel
Anti-Cavitation Impeller
100 Percent Leak Tested

from

$459.99

Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$10.99

Spectre’s Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.

Product Features:

Designed for Chevrolet 265-400 and Chrysler 273-440 small block engines
3/8 inch-16 by 1 inch bolts
Kit includes 12 bolts and washers
Manufactured from high quality steel
Bolts feature hex heads

from

$32.49

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$51.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$32.49

Heat treated black oxide coated Grade 8 alloy steel
Tall hex head bolt to prevent wrench from slipping
Extra thick parallel ground washer provides accurate, uniform torque
Washers Provides More Accurate And Uniform Torque
Grade 8 Alloy Steel

from

$63.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Rigid core, molded silicone rubber gaskets utilize the one-piece molded rubber technology for a perfect fit, ease of installation and include compression limiters to prevent overtightening.
Not intended for use in emission controlled vehicles.

from

$17.79

Dowel pins are precision machined and case hardened for accurate head alignment. Two per set. 5/16 inch x 5/8 inch

Product Features:

Precision Machined
Case Hardened
Give Accurate Alignment
2 Per Set

from

$226.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$258.99

HYDRAULIC – Xtreme Energy: Very strong mid-range torque and throttle response, 2200+ stall.

Product Features:

HYDRAULIC – Xtreme Energy: Very strong mid-range torque and throttle response, 2200+ stall.
274/286 Advertised Duration, 230/236 Duration @ .050″, .490″/.490″ Lift, 110 Lobe Separation
Valve spring upgrade required
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$81.99

Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.130 inch, Compressed thickness 0.055 inch

Product Features:

Five layer (graphite core/perforated steel outer layers) composite construction
Graphite core is excellent transfering heat away from hot spots in head preventing gasket burn-out.
Provides excellent stability, compressibility and high temperature endurance
Coated with high temperature silicone to ensure sealing of engine fluids
Will not brinell (indent) aluminum cylinder heads
For high performance street, drag race and oval track use
Compatible w/High Octane Fuel
Compatible With Exotic Fuel

from

$37.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
Not intended for use in emission controlled vehicles.

from

$139.99

Smoothes and Minimizes Turbulence
Increased Airflow
Creates More Horsepower
Easy Installation
Made From Space Age Elastomer
Effective And Unobtrusive
Long Lasting

from

$77.99

Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts. Includes sixteen studs 3/8-24 x 1.47 inch long top x 7/16-14 bottom.

Product Features:

Black Oxide Coated Grade 8 Steel
Kit Contains 16 Studs
Easy To Install
Heat Treated Steel
Grade 8 Steel

from

$251.99

HYDRAULIC – Xtreme Energy: Great for street machines, largest cam for stock converter, better with 2000 stall.

Product Features:

HYDRAULIC – Xtreme Energy: Great for street machines, largest cam for stock converter, better with 2000 stall.
268/280 Advertised Duration, 224/230 Duration @ .050″, .477″/.480″ Lift, 110 Lobe Separation
Valve spring upgrade required
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

Most Sold 1990 Pontiac Firebird Performance Exhaust Products

Explore our best-selling Pontiac parts for the 1990 Firebird among 12 OEM and aftermarket options starting from $20.49.

show more show less

from

$31.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$32.49

Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.

Product Features:

Manufactured from high-temperature acrylic blend exhaust material
Provides excellent sealing and durability
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use
Resists Deteriorating
Provides Excellent Torque Retention

from

$179.99

The 80 series is a cross-flow design for applications where the muffler is mounted transversely behind the rear end. Delivering an aggressive muscle car sound both inside and outside the vehicle, this is an excellent replacement for Camaros & Firebirds with transverse mufflers. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$84.99

Dynomax Super Turbo performance mufflers’ exclusive, patented, flow director design channels exhaust flow, and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow, and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance, while maintaining a mellow performance tone.

Product Features:

Large internal flow tubes improve exhaust flow and reduce backpressure
Dyno proven to flow up to 700 SCFM
Exclusive patented flow director channels exhaust flow and eliminates turbulence on most applications.
Fiberglass matting technology absorbs unwanted interior resonance but maintains a mellow tone
1.75-inch to 3-inch inlet/outlet configurations

from

$255.99

Product Features:

Ideal For Connecting Headers
Use With FLOWTECH Headers

from

$43.49

Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.

Product Features:

Bright Ball Burnish Finish
Made From 304 Stainless
Compact Hex Head Is Ideal Where Space Is Limited
12 Per Set
Resist corrosion and provides a clean professional appearance

from

$35.49

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Withstands Intense Exhaust Heat
Graphite-Impregnated Facing
Steel Expanded Metal Core
Superior Tensile Strength
Resists Deteriorating
Anti-stick Properties
Easy Removal For Disassembly

from

$241.99

Aero Chamber Muffler

from

$20.49

Header Gasket Set

from

$55.99

Product Features:

IMPROVED FLOW CAPACITY: Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM: Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES: Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS: Made from aluminized steel for durability and long life
BETTER TOGETHER: Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$1076.99

LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:

High Performance
Affordable
Durable 16 Gauge Material
Welds Easier
Lasts Longer
Heat Cured
High Heat Resistant

from

$614.99

Super Competition Cat-Back System Black Finish Mufflers with Aluminized Tubing

Product Features:

Exit At Stock Locations
Mandrel Bent Not Press Bent
Mandrel Bent Not Press Bent
Maximum Flow
Uses Existing Stock Hangers
Large Diameter 16 Ga. Aluminum Tubing
Low Back Pressure and Long Life
Easy Installation

Top-Rated Performance and Racing Products Brands For Your 1990 Pontiac Firebird

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1990 Pontiac Firebirds. Below you’ll find some of our best rated Performance and Racing Products from FEL-PRO Performance, MSD Ignition, and B & M, and more. Performance and Racing Products from these brands that fit a 1990 Firebird start at just $31.49 and are rated as high as 4.2 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular FEL-PRO Performance 1990 Pontiac Firebird Performance and Racing Products

When it comes to maintaining or upgrading your 1990 Pontiac Firebird, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. FEL-PRO Performance ticks all of those boxes. We offer a wide selection of FEL-PRO Performance Performance and Racing Products, specifically designed for the 1990 Pontiac Firebird. With over 3 FEL-PRO Performance brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.49, with an average price of just $39.66. Plus, with over 4 customer reviews and an average rating of 4.2 stars, you can trust that our FEL-PRO Performance Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $42.49

(1)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

“Real good products”

from $44.99

(1)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

“Racing application”

from $31.49

(2)

Exhaust Manifold Gasket Set

“Appear to be A-OK on my Chevrolet as far as fitment”

Popular MSD Ignition 1990 Pontiac Firebird Performance and Racing Products

MSD Ignition auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1990 Pontiac Firebird owner should feel confident when installing genuine MSD Ignition parts in their vehicle. To ensure the best fit and performance for your 1990 Firebird, Advance Auto Parts carries a full inventory of 3 MSD Ignition Performance and Racing Products. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these MSD Ignition Performance and Racing Products range from $54.99 to $79.99, plus, with more than 16 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $73.99

(7)

Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation

“Worked great”

from $54.99

(6)

High-Performance Distributor Cap & Rotor Replacement Kit

“great cap n rotor button, well made, working great”

from $79.99

(3)

Coil; GM External HEI Coil; High Performance

“This product is great, I also installed the msd cap and rotor and an msd ingnition 6a These products togeather create performace and a little more pow”

FAQs for 1990 Pontiac Firebird Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1990 Pontiac Firebirds?

Out of 177 Performance and Racing Products that fit 1990 Pontiac Firebirds, the following parts are the top sellers:

Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (6120010) – $17.99
Water Outlet Gasket (6120954) – $9.99
Premium Quality Thermostat Gasket with Solid Aluminum Carrier (6900023) – $35.49

What’s the price range for 1990 Pontiac Firebird Performance and Racing Products?

Performance and Racing Product prices for the 1990 Pontiac Firebird start at $5.99 and go up to $1,214.00 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1990 Pontiac Firebird?

The average price for Performance and Racing Products for the 1990 Pontiac Firebird is $278.50. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Pontiac Firebird model years?

Yes, we currently carry Performance and Racing Products for 34 model years of Pontiac Firebirds between 1967 and 2002. Performance and Racing Products are bought most frequently for the following model years: 2002, 2001, 2000, 1999, 1998, 1997, 1996, 1995, and 1994.

What are the cheapest Performance and Racing Products for my 1990 Pontiac Firebird?

The cheapest 1990 Pontiac Firebird Performance and Racing Products we carry in stock are:

Tie Rod Dust Boot (17360821) – $5.99
Tie Rod Dust Boot (17360833) – $5.99
Tie Rod Dust Boot (22906873) – $6.29
Ball Joint Dust Boot Set (22906819) – $6.29
Water Outlet Gasket (6120954) – $9.99

What are the top-rated Performance and Racing Products that fit the 1990 Pontiac Firebird?

Out of 1,995 reviews by customers, our 1990 Pontiac Firebird Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1990 Pontiac Firebird and their top-rated products:

Performance Radiators
- Thermocap Radiator Cap (6900022) – $53.99
Performance Shifters
- Thermocap Radiator Cap (6900022) – $53.99
Performance Oil Filters
- Thermocap Radiator Cap (6900022) – $53.99

What types of Performance and Racing Products do you sell for my 1990 Pontiac Firebird?

As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1990 Pontiac Firebird:

Can I get help with 1990 Pontiac Firebird Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Performance and Racing Products and more.

What is your return policy for Pontiac Firebird Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Pontiac Firebird Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1990 Pontiac Firebird Performance and Racing Products

Energy Suspension – Control Arm Bushing Set (Part No.3.3157R)

Hays – Flexplate: Chevy 57-85 (153T) (Part No.10-012)

PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.920G)

Dynomax – Exhaust Tail Pipe (Part No.43243)

Edelbrock – High Performance In-Tank Fuel Pump – 255 liter/hr. (67 gph) (Part No.17933)

Edelbrock – Water Pump Cartridge for Small-Block Chevy (Race Style) (Part No.8827)

Flowtech – Performance Exhaust Y-Pipes for Connecting Headers (Part No.11102YFLT)

Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7845)

Energy Suspension – Control Arm Bushing Set (Part No.3.3136G)

Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13128G)

Edelbrock – Pushrod Set for S/B Chevy (Part No.9653)

B & M – Automatic Shifter, Z-Gate (Part No.80681)

Energy Suspension – Performance Torque Arm Mount Bushing (Part No.3.1112R)

Mr. Gasket – Cylinder Head Dowel Pins (Part No.4375)

Holley – Avenger; Airfoil Kit (Part No.120-140)

Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)

Mr. Gasket – Intake Manifold Bolts (Part No.955G)

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2919)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5159R)

Accel – Distributor Cap And Rotor Kit (Part No.8120)

NOS/Nitrous Oxide Systems – GM EFI; Nitrous System (Part No.05151NOS)

Mr. Gasket – Alternator Bracket (Part No.9850)

Richmond Gear – Differential Mini Spool (Part No.78-1028-1)

Flowtech – High-Performance Headers with Fuel Economy and Leakproof Design (Part No.11100FLT)

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set (Part No.1803)

B & M – Holeshot 2400 (Part No.20412)

PerTronix – D9001 Flame-Thrower Hei Distributor Advance Curve Kit (Part No.D9001)

MSD Ignition – High-Performance Distributor Cap & Rotor Replacement Kit (Part No.8406)

Accel – HEI Distributor Cap & Rotor Kit – Tan – Chevrolet V8 (Part No.8132)

Accel – Dist:Chev V8 Hei Vac W/Coil (Part No.59107C)

PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)

Accel – Distributor Cap And Rotor Kit (Part No.8200)

MSD Ignition – Distributor Cap; Extreme Output; GM HEI (Part No.84111)

MSD Ignition – Distributor Gear; MSD Chevy Distributor; .500 ID; Iron (Part No.8531)

PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)

MSD Ignition – Distributor; Billet GM HEI (Part No.8365)

MSD Ignition – Distributor; V8; Late Model GM HEI; External Coil (Part No.8366)

PerTronix – D4062 Flame-Thrower HEI Distributor Rotor Blue (Part No.D4062)

PerTronix – D4260 Flame-Thrower Distributor Rotor HEI/EST Black (Part No.D4260)

Edelbrock – High Performance In-Tank Fuel Pump – 255 liter/hr. (67 gph) (Part No.17933)

K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-2002)

Mr. Gasket – Water Outlet Gasket (Part No.740C)

FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)

Mr. Gasket – Premium Quality Thermostat Gasket with Solid Aluminum Carrier (Part No.738G)

Competition Cams – Big Mutha’ Thumpr 243/257 Hydraulic Flat Cam/Lifter Kit (Part No.CL12-602-4)

Competition Cams – High Energy/Marine 218/218 Hydraulic Flat Cam/Lifter Kit (Part No.CL12-210-2)

Weiand – Action Plus Water Pumps (Part No.9208P)

B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)

Spectre – Bolt Kit Intake Hex Head (Part No.4652)

Mr. Gasket – High Performance Thermostat (Part No.4365)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)

Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7845)

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1886)

Mr. Gasket – Cylinder Head Dowel Pins (Part No.4375)

Competition Cams – Xtreme Energy 206/212 Hydraulic Flat Cam (Part No.12-230-2)

Competition Cams – Xtreme Energy 230/236 Hydraulic Flat Cam (Part No.12-246-3)

Mr. Gasket – Ultra Seal: Head Gasket (Part No.5799G)

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2919)

Holley – Avenger; Airfoil Kit (Part No.120-140)

Mr. Gasket – Ultra Seal: Screw-In Rocker Arm Studs (Part No.1076)

Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam (Part No.12-242-2)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)

Mr. Gasket – Exhaust Gasket: High-Temperature Protection, Durability, and Reliable Sealing (Part No.150A)

Flowmaster Inc. – 80 Series Muffler, 2.5in Offset Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42583)

Dynomax – Super Turbo Muffler: Di Fit Aluminized Steel, 19" L, 2.5" In, 2.5" Out, Oval (Part No.17739)

Flowtech – Performance Exhaust Y-Pipes for Connecting Headers (Part No.11102YFLT)

Mr. Gasket – Header Bolt Set (Part No.2210G)

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5901)

Hooker Headers – Aero Chamber Muffler (Part No.21729HKR)

Flowtech – Header Gasket Set (Part No.99161FLT)

Dynomax – Exhaust Tail Pipe (Part No.43243)

Hooker Headers – Competition Header (Part No.2460-2HKR)

Hooker Headers – Super Competition Cat-Back System (Part No.16820HKR)