1990 Pontiac Firebird Performance Exhaust Products
More 1990 Pontiac Firebird Performance Exhaust Products
Find your specific 1990 Pontiac Firebird original or aftermarket Performance Exhaust Products below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1990 Pontiac Firebird Performance Exhaust Products
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5901)
from
$31.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Withstands Intense Exhaust Heat
- Graphite-Impregnated Facing
- Steel Expanded Metal Core
- Superior Tensile Strength
- Resists Deteriorating
- Anti-stick Properties
- Easy Removal For Disassembly
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1436)
from
$38.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5921)
from
$38.59
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Has A Steel Core With Graphite Facing
- Graphite Facing Has Excellent Thermo-conductivity
- High Recovery Mat Allows For Better Seal Retention
- Can Be Trimmed For Port Modifications
- Expanded Steel Core For Stability
- These Gaskets Have Slotted End Holes
Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7151)
from
$60.29
Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.
Product Features:
See More
Product Features:
- Will Not Shrink/Deteriorate
- Creates A Tight Leak Proof Seal
- Helps Lower Under hood Temps
- Seals Irregular Surfaces
- Seals Slightly Damaged Surface
- Ideal For Tow Vehicles
- Ideal For Motor Homes
Hooker Headers – Super Competition Cat-Back System (Part No.16823HKR)
from
$584.99
Super Competition Cat-Back System Black Finish Mufflers with Aluminized Tubing
Product Features:
See More
Product Features:
- Exit At Stock Locations
- Mandrel Bent Not Press Bent
- Mandrel Bent Not Press Bent
- Maximum Flow
- Uses Existing Stock Hangers
- Large Diameter 16 Ga. Aluminum Tubing
- Low Back Pressure and Long Life
- Easy Installation
Mr. Gasket – Header Bolt Set (Part No.2210G)
from
$41.99
Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.
Product Features:
See More
Product Features:
- Bright Ball Burnish Finish
- Made From 304 Stainless
- Compact Hex Head Is Ideal Where Space Is Limited
- 12 Per Set
- Resist corrosion and provides a clean professional appearance
Mr. Gasket – Alternator Bracket (Part No.9850)
from
$25.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- F-Style
- Heavy Gauge Steel Construction
- Fits Small Block Chevy 265-400 CID
- Must Be Used With Part 9852
Mr. Gasket – Alternator Bracket (Part No.5170)
from
$38.49
Original equipment style bracket in high quality chrome for years of service. Includes hardware.
Product Features:
See More
Product Features:
- Chrome Plated Heavy Gauge Steel
- Can Be Used For Other Applications
- Looks Better Than Painted
- Hardware included
Mr. Gasket – Alternator Bracket (Part No.4954)
from
$19.29
These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated. Similar in design to OEM units, these brackets can be adapted to other engines.
Product Features:
See More
Product Features:
- Chrome plated
- Similar to OEM design
- May be adaptable to other applications
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942443)
from
$143.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 80 Series Muffler, 3in Offset Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound (Part No.43083)
from
$165.99
The 80 series is a cross-flow design for applications where the muffler is mounted transversely behind the rear end. Delivering an aggressive muscle car sound both inside and outside the vehicle, this is an excellent replacement for Camaros & Firebirds with transverse mufflers. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 80 Series Muffler, 2.5in Offset Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842583)
from
$175.99
The 80 series is a cross-flow design for applications where the muffler is mounted transversely behind the rear end. Delivering an aggressive muscle car sound both inside and outside the vehicle, this is an excellent replacement for Camaros and Firebirds with transverse mufflers. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowtech – Terminator Muffler, 2.5in Offset Inlet 2.5in Dual Offset Outlet, Non-Reversible, Moderate Sound (Part No.50162FLT)
from
$151.99Product Features:
- Aluminized Steel Construction
- 3in. Inner Pass Tubes
- Reduce Backpressure
- Increase Horsepower
- No Glass To Burn Or Blow Out
- Will Flow In Either Direction
- Welded For Strength/Durability
Hooker Headers – Aero Chamber Muffler (Part No.21729HKR)
from
$215.99
Aero Chamber Muffler
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942448)
from
$113.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Dynomax – 88028 Exhaust System Kit (Part No.88028)
from
$234.99
Dynomax® Performance Exhaust, a leading performance exhaust brand built on over 20 years of market leadership. Each and every Dynomax® product is backed by engineers who know what you want and expect out of a performance exhaust product.
Product Features:
See More
Product Features:
- DynoMax® Universal ‘Y-Pipes’ feature O.D. sized inlet and outlets allowing for easy fabrication of custom exhaust systems. Manufactured using 16 gauge aluminized coated steel
- Mandrel bends improve flow capacity over traditional bends
- Combine state-of-the-art engineering with quality material to provide exceptional strength and durability
- Dynomax® premium pre-bent pipe is manufactured with precision benders, and then fixture checked, insuring every part is a perfect fit, providing quick and easy installation.
- Pipe diameters are increased from OEM sizes to improve flow and increase power
Dynomax – 47638 Exhaust Intermediate Pipe (Part No.47638)
from
$122.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from aluminized steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Dynomax – 43243 Exhaust Tail Pipe (Part No.43243)
from
$56.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from aluminized steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Flowmaster Inc. – Prebent Tailpipes – 3.00 in. Dump Exit – Pair (Part No.15822)
from
$215.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
Popular 1990 Pontiac Firebird Performance Exhaust Products Categories
1990 Pontiac Firebird Performance Exhaust Products
Maybe you’re in the middle of a full rebuild of that 1990 Pontiac Firebird. Maybe you just need a couple of Performance Exhaust Products. Either way, Advance Auto Parts has 10 different Performance Exhaust Products in our inventory ranging from $31.49 to $584.99. That means you can find the exact parts or products you need to keep that 1990 Pontiac Firebird running smoothly.
Performance Exhaust Products are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1990 Pontiac Firebird. FEL-PRO Performance, Mr. Gasket, and Flowtech are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Exhaust Products for your 1990 Pontiac Firebird, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Exhaust Products to keep your 1990 Pontiac Firebird rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Exhaust Products Brands To Make Your 1990 Pontiac Firebird Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1990 Pontiac Firebird demands trusted brand parts and products to keep it running. Many trusted brands of Performance Exhaust Products make up Advance Auto Parts’ inventory, and all are ready to help make your Firebird the best it can be. Be sure to browse some of our top Performance Exhaust Products brands and parts.
Popular Flowmaster Inc. Performance Exhaust Products
We carry Flowmaster Inc. parts in our stock across Performance Exhaust Mufflers categories, plus more. For a 1990 Pontiac Firebird, our most popular Flowmaster Inc. Performance Exhaust Products include:
from
$165.99
(1)
80 Series Muffler, 3in Offset Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound
Performance Exhaust Mufflers
Top 1990 Pontiac Firebird Performance Exhaust Products from FEL-PRO Performance
FEL-PRO Performance products are another trusted brand when it comes to Performance Exhaust Products for your 1990 Pontiac Firebird. Popular FEL-PRO Performance parts include:
FAQs for 1990 Pontiac Firebird Performance Exhaust Products
What are the most purchased Performance Exhaust Products for the 1990 Pontiac Firebird?
Out of 10 Performance Exhaust Products for the 1990 Pontiac Firebird, the most popular in our inventory are:
from
$31.99
This product is not rated
Ultra Seal: Exhaust Gasket Set
Performance Exhaust Manifold Gaskets
from
$151.99
This product is not rated
Terminator Muffler, 2.5in Offset Inlet 2.5in Dual Offset Outlet, Non-Reversible, Moderate Sound
Performance Exhaust Mufflers
