1990 Ford Mustang Performance Exhaust Products
More 1990 Ford Mustang Performance Exhaust Products
Find your specific 1990 Ford Mustang original or aftermarket Performance Exhaust Products below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1990 Ford Mustang Performance Exhaust Products
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942448)
from
$113.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.842453)
from
$175.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 40 Series Muffler, 2.5in Center Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.952547)
from
$133.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – DBX Muffler, 3in Center Inlet 3in Center Outlet, 14in long, Non-Reversible, Moderate Sound (Part No.13014310)
from
$227.99
dBX series mufflers – this Laminar Flow internal configuration muffler features the revolutionary HP core design delivering excellent sound control for a wide variety of engine types where vehicle under-chassis space is limited. Utilizing cool shell technology to minimize radiant heat from the muffler body, they are perfect for sport compact imports as well as muscle cars and other performance applications. Constructed with 409S stainless steel internal components and wrapped with a proprietary insulation material and finally a polishable 304 stainless steel casing, these mufflers are as attractive as they are functional delivering a moderate to aggressive tone.
See More
Dynomax – Ultra Flo Muffler: Direct Fit, Stainless Steel, 14" L, 2.5" In, 3.5" Out, Oval (Part No.17572)
from
$249.99
DynoMax Ultra Flo¿ Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- 100% welded design for maximum durability
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
- Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
Flowmaster Inc. – 50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound (Part No.942051)
from
$154.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2in Offset Inlet 2in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942043)
from
$133.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1467)
from
$45.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1430)
from
$27.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1468)
from
$45.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5928)
from
$38.59
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1442)
from
$33.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.7556)
from
$40.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
Mr. Gasket – Exhaust Gasket Set (Part No.253)
from
$29.49
Manufactured from high-temperature composite exhaust material. Provides maximum torque retention to eliminate gasket failure. Can be trimmed if necessary for modified port applications. Precision die cut for an excellent fit. For OE replacement, high-performance street, drag race and oval track.
Product Features:
See More
Product Features:
- High-Temperature Exhaust Material
- Withstands Extreme Exhaust Heat
- Excellent Sealing Durability And Torque Retention
- Superior Tensile Strength
Dynomax – Exhaust Intermediate Pipe (Part No.55567)
from
$65.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from stainless steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Flowtech – Pro-Stang; Starter Tube (Part No.53609FLT)
from
$83.99Product Features:
- Aluminized Tubing
- Mustang Enthusiasts Only
- OEM Hangers
- Large 2-12in. Diameter Tubing
- Designed For Drag Racing
Flowmaster Inc. – Prebent Tailpipes – 2.50 in. Rear Exit – Pair (Part No.15805)
from
$223.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
Flowmaster Inc. – Prebent Tailpipes – 2.50 in. Rear Exit – Pair (Part No.15807)
from
$196.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
Flowmaster Inc. – Prebent Tailpipes 2.50 in.- Rear Exit, 1 Pair 409S (Part No.815814)
from
$330.99
These pre-bent pipe kits are made with 16 gauge 409S stainless steel mandrel bent tubing and are designed to fit your vehicle perfectly with all the quality and performance that you would expect from a Flowmaster product.
Product Features:
See More
Product Features:
- Mandrel bent 16 gauge 409 stainless tubing
- Exits at rear of vehicle
- 1 pair
- Made in the USA
- Premium Flowmaster quality
Popular 1990 Ford Mustang Performance Exhaust Products Categories
1990 Ford Mustang Performance Exhaust Products
Maybe you’re in the middle of a full rebuild of that 1990 Ford Mustang. Maybe you just need a couple of Performance Exhaust Products. Either way, Advance Auto Parts has 13 different Performance Exhaust Products in our inventory ranging from $36.49 to $330.99. That means you can find the exact parts or products you need to keep that 1990 Ford Mustang running smoothly.
Performance Exhaust Products are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1990 Ford Mustang. Flowmaster Inc., Dynomax, and Flowtech are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Exhaust Products for your 1990 Ford Mustang, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Exhaust Products to keep your 1990 Ford Mustang rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Exhaust Products Brands To Make Your 1990 Ford Mustang Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1990 Ford Mustang demands trusted brand parts and products to keep it running. Many trusted brands of Performance Exhaust Products make up Advance Auto Parts’ inventory, and all are ready to help make your Mustang the best it can be. Be sure to browse some of our top Performance Exhaust Products brands and parts.
Popular Flowmaster Inc. Performance Exhaust Products
We carry Flowmaster Inc. parts in our stock across Performance Exhaust Mufflers categories, plus more. For a 1990 Ford Mustang, our most popular Flowmaster Inc. Performance Exhaust Products include:
from
$113.99
(1)
Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound
Performance Exhaust Mufflers
from
$99.99
(3)
40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound
Performance Exhaust Mufflers
from
$139.99
(1)
50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound
Performance Exhaust Mufflers
Top 1990 Ford Mustang Performance Exhaust Products from Flowmaster Inc.
Flowmaster Inc. products are another trusted brand when it comes to Performance Exhaust Products for your 1990 Ford Mustang. Popular Flowmaster Inc. parts include:
from
$175.99
(1)
50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound
Performance Exhaust Mufflers
FAQs for 1990 Ford Mustang Performance Exhaust Products
What are the most purchased Performance Exhaust Products for the 1990 Ford Mustang?
Out of 13 Performance Exhaust Products for the 1990 Ford Mustang, the most popular in our inventory are:
from
$91.99
This product is not rated
Ultra Flo Muffler: Universal Fit Stainless Steel, 14" L, 2.5" In, 2.5" Out, Oval
Performance Exhaust Mufflers
from
$38.59
This product is not rated
Ultra Seal: Exhaust Gasket Set
Performance Exhaust Manifold Gaskets
