1990 Ford F-350 Pickup Fuel and Emissions Systems

Below you will find various in-demand Ford Fuel and Emissions Systems, components and accessories for your 1990 F-350 Pickup. Advance Auto Parts has popular F-350 Pickup parts like Oxygen Sensors, Gas Caps, Fuel Injectors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other F-350 Pickup model years including 1988, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997 and more. Select a category of 1990 Ford F-350 Pickup Fuel and Emissions Systems below and start saving instantly.

Popular 1990 Ford F-350 Pickup Fuel and Emissions Systems Categories

Air- Fuel Ratio Sensors

Fuel Tank Cleaning Kits

Fuel Pressure Sensors

Fuel Injector Installation Kits

Fuel Injection Pumps

MAP-Barometric Pressures

Diesel Fuel Heating Elements

Smog Pumps

Manifold Air Pressure Sensors

Canister Purge Solenoids

Fuel Tanks

EGR Valves

Fuel Injectors

Fuel Pump Hanger Assemblies

Idle Air Parts

Vapor Canisters

Water In Fuel Sensors

Pressure Regulators

Air Charge Temperature Sensors

Ambient Air Temperature Sensors

Fuel Injector O-Ring Kits

Electric Pump Filter and Strainers

Smog and Vacuum Pump Pulleys

Fuel Injector Seal Kits

Fuel Injection Idle Air Control Valve Gaskets

Fuel Tank Straps

Fuel Injector Gaskets

Fuel Tank Lock Rings

Fuel Tank Filler Necks

Fuel Tank Vent Valves

Fuel Tank Sending Units

Mass Air Flow Sensor Connectors

Fuel Line Connectors

Fuel Tank Selector Valves

EGR Valve Position Sensors

Fuel Pump Tank Seals

Exhaust Check Valves

Oxygen Sensor Connectors

Air Injection Pipe and Tubes

Fuel Injector O-rings

EGR Valve Gaskets

EEC-IV Test Plug Connectors

Ported Vacuum Switches

Fuel Injector Set

Fuel Cap Tester Adapters

Fuel System Wiring Harness Connectors

Vacuum Control Valves

Fuel Injection Pump Installation Kits

Fuel Tank Selector Valve Connectors

Fuel Tank Vent Valve Seals

Essential Fuel and Emissions Systems for 1990 Ford F-350 Pickups

from

$69.25

NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Extensively Tested During Manufacture to Guarantee Quality and Reliability
Supplied With a Factory-Fitted OEM Connector for Easy Installation

from

$49.49

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$9.49

CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$21.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$2.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$59.99

from

$685.99

Carquest premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is tested on a sophisticated flow bench under multiple operating parameters. This injector four-pack offers savings over purchasing single injectors. Replacing all four injectors at the same time ensures a complete repair and reduces the chance of future labor costs.

Product Features:

Includes four premium fuel injectors
Each unit is 100% tested to OE specifications
Includes 100% replacement of plunger and barrel to improve longevity over competitive units
Includes all new premium quality o-rings and seals
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$11.29

This fuel tank vent valve seal acts as a gasket between the fuel tank and rollover valve to prevent debris or moisture from entering the tank, and fuel or vapor from exiting. Check the product dimensions and vehicle fitment information to select the correct seal for your application.

Product Features:

Direct replacement – this fuel tank vent valve seal is designed to match the fit and function of the original equipment gasket in specified applications
Ideal solution – engineered to securely seal the vent valve to the fuel tank when the original seal is leaking or has failed from exposure to fuel
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$151.99

CARDONE Remanufactured Smog Pumps are engineered for quick installation and no comebacks. These pumps come with all necessary components for easy installation, while other brands leave out integral components, such as inlets and outlets that commonly break during installation. CARDONE engineers pay special attention to proper vane size and shape on each application to maintain proper flow, while other brands consolidate vane sizes for their own convenience.

Product Features:

100% testing of all units guarantees reliable performance every time.
High temperature grease extends bearing life, resulting in longer pump life.
New carbon shoes/vanes on every unit ensure accurate air output to meet today’s stringent emissions standards.
Guaranteed fit and function.
Meets or exceeds O.E.M performance.

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$447.99

KIT – INJECTOR

from

$132.99

CARDONE New Vacuum Pumps are backed by CARDONE Engineered Technology, which ensures that all CARDONE Select New Vacuum Pumps meet or exceed O.E. form, fit and function. CARDONE Technology is based on over 40 years of reverse-engineering expertise, where original design weaknesses are identified and corrected, resulting in premium-quality, brand-new parts you can rely on. All units adhere to strict S.A.E. specifications and are 100% tested to ensure reliable, long-lasting performance.

Product Features:

Units are tested 100% to ensure they are leak-free and meet vacuum performance standards.
Engineered to meet or exceed O.E.M.performance.
Designed for easy installation.
Guaranteed fit and function.

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$25.99

from

$12.34

Vacuum Control Valve

from

$35.49

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
100% O-ring replacement
All Delphi injectors are tested utilizing OE methodologies

from

$23.99

None

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$16.99

This engine camshaft position sensor connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this engine camshaft position sensor connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$39.99

from

$148.99

New Standard Replacement Fuel Sending Unit, 73-84 F-Series, With 19 Gallon Rear Mount Tank

Product Features:

73-84 F-Series With 19 Gallon, Rear Mount Tank
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$189.99

This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.

Product Features:

Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
Quality assured – this part has been validated to ensure a quality fit and long service life
Trustworthy design – backed by team of product specialists in the United States

from

$7.34

With today’s complex automotive engines, it’s even more critical to have the right sealing components for accurate pressure relief and gasket sealing.

Product Features:

Wide range available in precut sizes
Available plain or backed with adhesive
Bulk gasket material available for custom cutting by hand

from

$27.99

New Platinum Pro Fuel Tank Straps

Product Features:

16 Gallon, Side Mount Tank
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$57.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$27.99

This fuel tank vent valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel tank vent valve is designed to match the fit and function of the original valve on specified vehicles.
Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$68.99

This replacement diesel fuel heating element matches the function and performance of the original equipment part. Made of quality materials, it has undergone extensive testing to ensure durability.

Product Features:

Upgraded replacement – this diesel fuel bowl heating elements features more reliable technology.
Ensures performance – updated ceramic design maintains a lasting electric connection.
Direct fit – reverse engineered from original equipment for seamless installation
Quality engineering – designed and tested in the United States

from

$41.99

The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module. The EGR Valve Position Sensor allows the engine control module to monitor the location and operation of the EGR valve.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$167.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Unit is dual coated for enhanced corrosion protection
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Tested with OE fuel cap to prevent evaporative emission and check engine light failure

Upgrade your 1990 Ford F-350 Pickup with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1990 Ford F-350 Pickup, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your F-350 Pickup functioning at its best. At Advance Auto Parts, we offer a wide selection of 202 Fuel and Emissions Systems for the 1990 Ford F-350 Pickup, designed to meet your needs without breaking the bank. From Oxygen Sensor replacements to Gas Caps upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1990 Ford F-350 Pickup at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $2.24 to $761.99, with an average price of $85.20. Our 202 Fuel and Emissions Systems in stock come from 24 trusted brands, so you’re sure to find the right part for your 1990 Ford F-350 Pickup without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1990 Ford F-350 Pickup, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like FELPRO Carquest Premium, and more. FELPRO Fuel and Emissions Systems start at just $2.29 and boast an impressive 5 stars average rating from customers. With 2,042 customer reviews and counting, our 1990 Ford F-350 Pickup Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1990 Ford F-350 Pickup is always ready to roll. We’re committed to providing you with everything you need to keep your F-350 Pickup in top shape, all in one place. Start shopping confidently below for your 1990 Ford F-350 Pickup!

Best-Selling Oxygen Sensors for 1990 Ford F-350 Pickups

Enhance the driving experience in your Ford with 11 quality Oxygen Sensor components, starting at $14.99.

show more show less

from

$57.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$53.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$69.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$29.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$60.99

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$80.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$53.00

The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

from

$74.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$65.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$51.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$14.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Most Popular 1990 Ford F-350 Pickup Gas Caps

Customize your Ford with 22 Gas Caps products like Gas Caps, all priced under $31.99.

show more show less

from

$15.79

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$11.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$16.79

None

Product Features:

Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$12.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.36

With Retaining Straps Motorcraft offers a wide variety of caps to support the ongoing maintenance needs of Ford and Lincoln vehicles.

Product Features:

Motorcraft provides extensive coverage of these caps
Available for most Ford and Lincoln vehicles
Locking sets are offered for dual-tank applications that contain two matching caps with four keys
Both locking- and non-locking styles are available

from

$14.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.49

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.79

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$16.79

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
“Torque Override” feature aids in the proper installation of the fuel cap. It produces an audible click as the O-ring that seals the cap is properly compressed.

from

$23.99

None

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$21.79

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$22.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$12.49

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$6.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$31.99

None

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$23.99

Experience uncompromising quality and emissions compliance with these tethered fuel caps. Manufactured with top-tier materials and rigorous production and safety standards adhering to Original Equipment Manufacturer guidelines. Designed meticulously to meet both state and federal emissions requirements, it ensures environmental responsibility. With its specifically engineered pressure and vacuum relief valves, fuel evaporation becomes a thing of the past. Bid farewell to the risk of losing up to 30 gallons of precious gasoline over a year due to a leaking fuel cap. Trust in our superior construction to safeguard your fuel and contribute to a greener future.

from

$10.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$22.99

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$22.99

FUEL TANK CAP

from

$20.99

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

Top Picks for 1990 Ford F-350 Pickup Fuel Injectors

Upgrade Ford F-350 Pickups with top-quality Fuel Injectors parts, including 41 OEM and aftermarket selections for your 1990 model.

show more show less

from

$2.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$3.49

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$80.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
State-of-the-art designs that meet or exceed OE specifications
Top-of-the-line quality and performance
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$7.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$2.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$4.79

This fuel injection idle air control valve gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel injection idle air control valve gasket is designed to match the fit and function of the original gasket on specified vehicles.
Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$41.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
100% O-ring replacement
All Delphi injectors are tested utilizing OE methodologies

from

$9.99

The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$61.99

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$2.99

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$10.29

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$68.99

CARQUEST precision remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested to meet or exceed OE performance specifications.

Product Features:

Premium OE quality materials
Includes copper combustion seal

from

$433.99

ACCEL Performance fuel injectors provides precise control of fuel delivery & atomization for improved throttle response. They are all new units: not modified stock units or remanufactured from used cores. They feature a low-mass disc design that ensures accurate metering control even at ultra-low & high duty cycles and higher fuel pressures. ACCEL performance Injectors can be used with gasoline or E85 and are great for blown applications where increased fuel pressure and precise metering are required. State-of-the-art manufacturing processes reduce flow deviations between injectors, which improve performance. Low- and High-impedance designs are available to match most commercial applications.

Product Features:

Provides precise control of fuel delivery & atomization for improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$8.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
High-quality materials withstand extreme conditions
Undergoes extensive testing to ensure reliability
As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process

from

$8.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$433.99

ACCEL Performance fuel injectors provides precise control of fuel delivery & atomization for increased power and improved throttle response. They are all new units: not modified stock units or remanufactured from used cores. They feature a low-mass disc design that ensures accurate metering control even at ultra-low & high duty cycles and higher fuel pressures. ACCEL performance Injectors can be used with gasoline or E85 and are great for blown applications where increased fuel pressure and precise metering are required. State-of-the-art manufacturing processes reduce flow deviations between injectors, which improve performance. Low- and High-impedance designs are available to match most commercial applications.

Product Features:

Provides precise control of fuel delivery & atomization for increased power and improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$482.99

Provides precise control of fuel delivery & atomization for improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$76.99

CARQUEST new diesel fuel injectors are manufactured using state of the art equipment to ensure long life and trouble-free operation. Each injector is 100% tested to meet or exceed OE performance specifications.

Product Features:

Premium OE quality materials
Includes copper combustion seal

from

$4.75

Fuel Pres. Reg. O-Ri

from

$605.99

Provides precise control of fuel delivery & atomization for increased power and improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$494.99

Provides precise control of fuel delivery & atomization for increased power and improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$461.99

Provides precise control of fuel delivery & atomization for improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$90.99

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$20.46

Motorcraft Fuel Injector O-Ring Kits are manufactured with premium quality in mind

Product Features:

All parts meet original equipment requirements for fit, finish and durability
Specifically engineered for Ford and Lincoln vehicles
Durability tested to meet demanding original equipment service life specifications
Helps maintain original performance standards

from

$527.99

Provides precise control of fuel delivery & atomization for increased power and improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance
Accurate Metering Control Even At Ultra-Low And High Duty Cycles

from

$545.99

Provides precise control of fuel delivery & atomization for increased power and improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$450.99

Provides precise control of fuel delivery & atomization for increased power and improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$396.99

The Carquest line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA. Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.

Product Features:

Includes eight premium fuel injectors
Each unit is 100% tested to OE specifications
Includes new o-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$144.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

100% O-ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

from

$55.99

Fuel Injector Repair Kit

from

$51.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to

from

$48.49

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$30.99

CARDONE Fuel Injection Pump Installation Kits provide the option of not replacing the entire oil rail, providing an easy fix and saving you hundreds of dollars. Paired with CARDONE’s premium Oil Rail Removal Tool (2K-205T), this repair kit allows technicians and vehicle owners to repair expensive high-pressure oil issues in a fraction of the time.

Product Features:

All in one kit makes the installation job easier and faster, as these components are typically sold separately from O.E.M. suppliers
Each installation kit includes everything required (gaskets, O-rings, sealing washers, etc.) for proper installation
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$28.99

All Motorcraft Seal designs undergo rigorous lab and real world tests in order to provide original equipment performance and reliability. Motorcraft Seals are extensively tested for proper seating and sealing under both temperature and pressure extremes.

Product Features:

Why Buy:
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the manufacture of the vehicle are included in these aftermarket replacement parts, ensuring the most current technology and performance

from

$14.95

Mahle, Fuel Injector O-Ring Kit, Pack of 12

from

$10.32

Motorcraft Fuel Injector O-Ring Kits are manufactured with premium quality in mind

Product Features:

All parts meet original equipment requirements for fit, finish and durability
Specifically engineered for Ford and Lincoln vehicles
Durability tested to meet demanding original equipment service life specifications
Helps maintain original performance standards

from

$8.79

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$4.75

The Mahle Idle Control Valve Gasket is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Original equipment design and quality
Utilizes OE equivalent or better materials
Meets or exceeds OEM specifications

from

$3.29

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$2.29

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$2.24

Dorman’s Fuel Injection Idle Air Control Valve Gaskets are engineered for affordability and convenience. Save time, money and labor by replacing only the Gasket – instead of the entire Fuel Injection Idle Air Control Valve. A long-lasting, airtight seal is ensured.

Product Features:

Direct replacement for a proper fit
Replacement safeguards the Idle Air Control Valve against air leaks
Replacement prevents poor engine idle and restores engine performance
Highly durable against fluctuating under hood temperatures

In-Demand Fuel Pumps for 1990 Ford F-350 Pickups

Select from 25 premium Fuel Pumps parts for your 1990 Ford F-350 Pickup, with prices ranging from $11.49 to $761.99.

show more show less

from

$41.49

This fuel pump strainer is designed to match the fit and function of the original strainer on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel pump strainer is designed to match the fit and function of the original strainer on specified vehicles.
Restores functionality – reliable replacement for an original part that has failed due to fatigue.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$30.99

Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:

Meets or exceeds OE specifications for fit, form and function
Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$29.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
All pumps are functionally tested for correct operation which improves pump reliability
Exact fit original equipment replacements means easy installation
Consistent pressure at all operating temperatures results in quick start-ups.
Pump is designed for diesel engines and applications
Always check fuel filter when replacing the fuel pump

from

$120.99

CARQUEST fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every CARQUEST Fuel Pump to deliver greater reliability.

Product Features:

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Triple barb hose fitting provides superior, long-lasting seal
Superior return porting for optimum fuel flow
Enhanced pump to flange harness design provides worry-free electrical performance
Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
Gradient density, dual zone filtration designed for better contamination resistance

from

$154.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
When servicing the fuel system, always check the fuel filter for possible replacement
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$123.99

CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function.

Product Features:

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Advanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.
High-performance pump section assembly provides superior performance
Leading-edge inlet design to increase performance and efficiency, leading to longer life
High grade outer shell for life-long corrosion resistance
Optimized, precision-wound armature assembly for increased performance

from

$324.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank assemblies meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Reduce labor time up to 52% by using our fuel tank assembly which includes the fuel tank, fuel tank straps and fuel pump
Designed to ensure a debris free, clean fuel system upon replacement
Fuel tanks made with corrosion resistant, OE approved, Ni Terne steel
Proudly manufactured in Canada under stringent quality systems (QS-9000 and ISO 9002)

from

$68.99

Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$11.49

Filtration performance and micron rating meet or exceed OE requirements
OE replacement strainer designed for use with Delphi electric fuel pumps
Replacing the strainer is always recommended when replacing a fuel pump

from

$91.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$254.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
When servicing the fuel system, always check the fuel filter for possible replacement
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$172.99

Carquest Premium fuel pump modules and assemblies are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Upgraded guide rods and springs that are mounted internally on all possible applications
Increased rubber footings that are E85 compatible
Includes installation gaskets or seals where applicable

from

$159.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Upgraded guide rods and springs that are mounted internally on all possible applications
Increased rubber footings that are E85 compatible
Includes installation gaskets or seals where applicable

from

$164.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Upgraded guide rods and springs that are mounted internally on all possible applications
Increased rubber footings that are E85 compatible
Includes installation gaskets or seals where applicable

from

$116.99

Carquest Premium offers a complete line of fuel pump hangers covering a wide variety of North American vehicle applications. Carquest Premium fuel pump hangers are engineered and manufactured in a highly automated and dust-free environment and meet or exceed all OEM specifications. Carquest Premium ensures premium quality through stringent performance and reliability testing for pressure characteristics, flowrates, electrostatic discharge, and 100% leak testing. Carquest Premium fuel pump hangers are drop-in replacements right out of the box with all the necessary components included.

Product Features:

Meets or exceeds OE specifications for fit, form and function
Premium quality through stringent performance and reliability testing for pressure characteristics, flowrates, electrostatic discharge, and 100% leak testing
Drop-in replacements right out of the box with all the necessary components included
Includes installation gaskets or seals where applicable

from

$102.99

Meets or exceeds OE specifications for fit, form and function
Premium quality through stringent performance and reliability testing for pressure characteristics, flowrates, electrostatic discharge, and 100% leak testing
Drop-in replacements right out of the box with all the necessary components included
Includes installation gaskets or seals where applicable

from

$761.99

CARQUEST premium remanufactured fuel injection pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Includes pump mounting o-ring

from

$405.58

FUEL PUMP

from

$227.11

The Hella Electric Fuel Pump meets or exceeds the OE specifications for fit, durability and performance.

Product Features:

OE-Equivalent electric fuel pump.
Direct fit for easy installation.
OE connections and fittings.
Highly efficient turbine design.
Designed for quieter operation.

from

$167.26

Fuel Pump Assembly

from

$136.99

New Platinum Pro Fuel Module, Rear Mount Steel Tank 19 Gallon Fuel Pump

Product Features:

Rear Mount, Steel Tank 19 Gallon Fuel Pump
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$103.99

Meets or exceeds OE specifications for fit, form and function
Premium quality through stringent performance and reliability testing for pressure characteristics, flowrates, electrostatic discharge, and 100% leak testing
Drop-in replacements right out of the box with all the necessary components included
Includes installation gaskets or seals where applicable

from

$60.87

As a leading Tier 1 supplier to the top 25 global vehicle manufacturers, Delphi understands what it takes to make the smart parts that technicians are looking for. Delphi knows that not every car in a repair shop is a newer model. But every driver still wants reliable, fast starts. So count on us to help you offer the fuel fixes that many new car dealerships cannot. Built to tough OE engineering standards, Delphi offers replacement fuel pumps for millions of domestic and imported vehicles, from American Motors to Honda, Volkswagen to Chrysler, and beyond. Older model vehicles with carburetors typically use mechanical fuel pumps. The pump can be located next to or on the engine, and uses an internal diaphragm to draw fuel from the tank and push it into the carburetor. A worn internal diaphragm is the most common cause for mechanical pump replacement. The diaphragm is made of cloth-reinforced rubber, and with age may wear out and leak causing poor fuel delivery. Because the diaphragm is integrally sealed inside of it, the entire mechanical fuel pump must be replaced.

Product Features:

Built to tough OE engineering standards
Reinforced Diaphram
Direct fit for easy installation

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$15.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

Most Sold 1990 Ford F-350 Pickup Air Flow Sensors

Explore our best-selling Ford parts for the 1990 F-350 Pickup among 14 OEM and aftermarket options starting from $16.79.

show more show less

from

$60.28

OE-Equivalent.
Direct fit for easy installation.
Extensively Tested During Manufacture to Guarantee Quality and Reliability
Supplied With a Factory-Fitted OEM Connector for Easy Installation

from

$61.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.

from

$57.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$51.35

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

from

$109.77

Motorcraft MAP sensors are the only MAP sensors recommended by Ford Motor Company for use in Ford and Lincoln vehicles.

Product Features:

New and remanufactured available to help meet your customers’ needs
Units come ready to plug and play, with no need for modifications
Optimizes fuel consumption and emissions to help ensure vehicles meet various state smog-level requirements
Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
Design includes OE innovations and upgrades

from

$16.79

ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$25.99

from

$69.25

OE-Equivalent.
Direct fit for easy installation.
Extensively Tested During Manufacture to Guarantee Quality and Reliability
Supplied With a Factory-Fitted OEM Connector for Easy Installation

from

$34.11

The Walker Air Charge Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$71.75

MAP Sensor

from

$70.99

Delphi MAP sensors use the latest OE technology; Internally protected against moisture intrusion and vibration; Manufactured to meet or exceed OE requirements for 100,000 miles.

Product Features:

Designed and engineered with Delphi expertise
Internally protected against moisture intrusion and vibration
Long lasting and durable
Designed and engineered with Delphi expertise

from

$67.18

The Bosch universal oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

from

$56.99

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Made to OE spec to ensure a proper fit, form and function.
Sensors are engineered for precision performance, durability and a long service life.
All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.

from

$20.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better

Top-Rated Fuel and Emissions Systems Brands For Your 1990 Ford F-350 Pickup

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1990 Ford F-350 Pickups. Below you’ll find some of our best rated Fuel and Emissions Systems from FELPRO and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 1990 F-350 Pickup start at just $2.29 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1990 Ford F-350 Pickup Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1990 Ford F-350 Pickup, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Fuel and Emissions Systems, specifically designed for the 1990 Ford F-350 Pickup. With over 5 FELPRO brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.29, with an average price of just $4.71. Plus, with over 176 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$8.29

This product is not rated

UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET

“”

from
$2.49

(27)

Fuel Injection Throttle Body Mounting Gasket

“all good”

from
$2.99

(8)

EGR/EXHAUST AIR SUPPLY GASKET

“Perfect fit.”

Popular Carquest Premium 1990 Ford F-350 Pickup Fuel and Emissions Systems

Carquest Premium auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1990 Ford F-350 Pickup owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1990 F-350 Pickup, Advance Auto Parts carries a full inventory of 62 Carquest Premium Fuel and Emissions Systems. Plus you will be keeping your Ford in peak condition while saving money because prices on these Carquest Premium Fuel and Emissions Systems range from $2.99 to $761.99, plus, with more than 419 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from
$61.99

This product is not rated

Remanufactured Fuel Injector

“”

from
$91.99

This product is not rated

Fuel Pump Module Assembly: Fuel Pump, Sending Unit, Wiring Harness and Strainer

“”

from
$57.99

This product is not rated

Manifold Absolute Pressure Sensor (MAP)

“”

FAQs for 1990 Ford F-350 Pickup Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 1990 Ford F-350 Pickups?

Out of 202 Fuel and Emissions Systems that fit 1990 Ford F-350 Pickups, the following parts are the top sellers:

Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack (18481528) – $14.99
Fuel Injector O-Ring Kit (3504360) – $7.49
Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack (12102600) – $23.99

What’s the price range for 1990 Ford F-350 Pickup Fuel and Emissions Systems?

Fuel and Emissions System prices for the 1990 Ford F-350 Pickup start at $2.24 and go up to $761.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 1990 Ford F-350 Pickup?

The average price for Fuel and Emissions Systems for the 1990 Ford F-350 Pickup is $85.20. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Ford F-350 Pickup model years?

Yes, we currently carry Fuel and Emissions Systems for 41 model years of Ford F-350 Pickups between 1953 and 1997. Fuel and Emissions Systems are bought most frequently for the following model years: 1997, 1996, 1995, 1994, 1993, 1992, 1991, 1989, and 1988.

What are the cheapest Fuel and Emissions Systems for my 1990 Ford F-350 Pickup?

The cheapest 1990 Ford F-350 Pickup Fuel and Emissions Systems we carry in stock are:

Idle Air Valve Gaskets (10740553) – $2.24
THROTTLE BODY GASKET SET (20688609) – $2.29
Fuel Injection Idle Air Control Valve Gasket (12547257) – $2.29
Fuel Injection Throttle Body Mounting Gasket (3210227) – $2.49
EGR/EXHAUST AIR SUPPLY GASKET (3208095) – $2.99

What types of Fuel and Emissions Systems do you sell for my 1990 Ford F-350 Pickup?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1990 Ford F-350 Pickup:

Can I get help with 1990 Ford F-350 Pickup Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Fuel and Emissions Systems and more.

What is your return policy for Ford F-350 Pickup Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Ford F-350 Pickup Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1990 Ford F-350 Pickup Fuel and Emissions Systems

NTK – NTK Oxygen Sensor (Part No.C5010299262NTK)

Carquest Premium – Reman Multi Port Fuel Injector (Part No.A211-1122)

Carquest Premium – Fuel Pump Strainer FS260352 (Part No.FS260352)

Carquest Premium – Fuel Tank Selector Valve Connector (Part No.FSA1013)

Felpro – EGR/EXHAUST AIR SUPPLY GASKET (Part No.72649)

Carquest Premium – Secondary Air Injection Pipe (Part No.ECN1058)

Carquest Premium – Reman Diesel Fuel Injector – 4 Pack (Part No.AD25022-4PK)

Dorman – Fuel Tank Vent Valve Seal Grommet (Part No.926-820)

Cardone – Remanufactured Smog Air Pump (Part No.32-604)

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Motorcraft – KIT – INJECTOR (Part No.CMR-2-RM)

Cardone New – New Vacuum Pump (Part No.90-1006)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1073)

Motorcraft – Vacuum Control Valve (Part No.D3020672044MTR)

Delphi – Diesel Fuel Injector Installation Kit (Part No.7135-276)

Carquest Premium – Locking Fuel Cap (Part No.10591)

Dorman – Help – Coil Harness Repair Kit (Part No.49813)

Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1031)

KAI – Fuel Sending Unit (Part No.TNKFG73A)

Carquest – Steel Fuel Tank (Part No.576-145)

Motorcraft – Idle Control Valve Gasket (Part No.C4063195642MTR)

KAI – Fuel Tank Strap (Part No.FST010005)

Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Exact Fit (Part No.15719)

Dorman – Fuel Tank Vent Rollover Valve (Part No.911-060)

Dorman – Diesel Fuel Bowl Heating Element (Part No.904-210)

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Position Sensor (Part No.EGC1043)

Spectra Premium – Fuel Filler Neck (Part No.FN725)

Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Exact Fit (Part No.15719)

NTK – Switching Oxygen Sensor: 3 Wire, 19" Long, Heated, Direct Fit (Part No.22013)

Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (Part No.15729)

Bosch – Oxygen Sensor: 3 Wire, 18.94" Long, Heated, Exact Fit (Part No.13953)

NTK – Switching Oxygen Sensor: 4 Wire, 22" Long, Heated, Direct Fit (Part No.22503)

DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4210)

Bosch – Bosch Oxygen Sensor (Part No.C501091453BOS)

DENSO – Oxygen Sensor: 3 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-3000)

DENSO – Oxygen Sensor: 4 Wire, 23.62" Long, Heated, Exact Fit (Part No.234-4611)

DENSO – Oxygen Sensor: Upstream, 3 Wire, 18.82" Long, Heated, Exact Fit (Part No.234-3007)

Carquest Premium – Oxygen Sensor Connector (Part No.PTA1583)

Carquest Premium – Diesel Fuel Cap: 10819D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819D)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591D)

Carquest Premium – Fuel Cap: 10830, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10830)

Motorcraft – Motorcraft Fuel Tank Cap (Part No.E2010196383MTR)

Carquest Premium – Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)

Carquest Premium – Fuel Cap: 10834, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10834)

Carquest Premium – Gas Cap: Twist On, Reduces Air Pollution, 1 Pack (Part No.10817)

Carquest Premium – Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10501)

Carquest Premium – Fuel Cap: 10819, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819)

Carquest Premium – Locking Fuel Cap (Part No.10591)

Carquest Premium – Locking Fuel Cap: 10591D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10591D)

Carquest Premium – Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10504)

Carquest Premium – Locking Fuel Cap: 10507, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10507)

Carquest Premium – Diesel Fuel Cap: 10830D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10830D)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17504)

Carquest Premium – Locking Fuel Cap (Part No.10501D)

Motorad – Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack (Part No.MGC817T)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17507)

Carquest Premium – Locking Fuel Cap: 17501D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.17501D)

Motorcraft – FUEL TANK CAP (Part No.FC-920)

Motorad – Tethered Fuel Cap (Part No.MGC517T)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60845)

MAHLE Original – Gasket (Part No.G31324)

Carquest – Fuel Injector (Part No.67592)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Felpro – THROTTLE BODY GASKET SET (Part No.71216)

Dorman – Help – Idle Air Valve Gaskets (Part No.90102)

Delphi – Diesel Fuel Injector Installation Kit (Part No.7135-264)

ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 8 O-Rings (Part No.217-3365)

Carquest Premium – Remanufactured Fuel Injector (Part No.A211-1112)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS009)

ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with Seals with 2 O-Rings (Part No.217-3414)

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD11082)

Accel – Perf Fuel Injectors 24Lb 8-Pak (Part No.150824)

Carquest – Fuel Injector Seal Kit (Part No.274838)

Felpro – UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET (Part No.MS 94177)

Accel – Perf Fuel Injectors 30Lb 8-Pak (Part No.150830)

Accel – Perf Fuel Injectors 21Lb 8-Pak (Part No.150821)

Carquest Premium – New Diesel Fuel Injector (Part No.AN11082)