1997 Ford F-350 Pickup Fuel and Emissions Systems

Below you will find various in-demand Ford Fuel and Emissions Systems, components and accessories for your 1997 F-350 Pickup. Advance Auto Parts has popular F-350 Pickup parts like Fuel Pumps, Gas Caps, Fuel Injectors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other F-350 Pickup model years including 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996 and more. Select a category of 1997 Ford F-350 Pickup Fuel and Emissions Systems below and start saving instantly.

Popular 1997 Ford F-350 Pickup Fuel and Emissions Systems Categories

Diesel Injector Driver Modules

Air- Fuel Ratio Sensors

Fuel Tank Cleaning Kits

Fuel Pressure Sensors

Air Flow Meters and Mass Air

EGR Pressure Feedback Sensors

Gas Caps

Diesel Injection Control Pressure Sensors

Vacuum Pumps

Fuel Pumps

Oxygen Sensors

Diesel Injection High Pressure Oil Pumps

Fuel Lift Pumps

Fuel Injector Sleeves

Fuel Injection Pumps

Fuel Injection Pressure Sensors

MAP-Barometric Pressures

Diesel Fuel Heating Elements

Manifold Air Pressure Sensors

Canister Purge Solenoids

Fuel Tanks

EGR Valves

Fuel Injectors

Fuel Pump Hanger Assemblies

Idle Air Parts

Ambient Air Temperature Sensor Connectors

EGR Pressure Feedback Hoses

Fuel Tank Pressure Sensors

Mass Air Flow Sensor Relays

Water In Fuel Sensors

Pressure Regulators

Air Charge Temperature Sensors

Fuel Injection Idle Air Control Valves

Ambient Air Temperature Sensors

Fuel Injector O-Ring Kits

Electric Pump Filter and Strainers

Smog and Vacuum Pump Pulleys

Fuel Injector Seal Kits

Fuel Injection Idle Air Control Valve Gaskets

Fuel Tank Straps

Fuel Injector Gaskets

Fuel Pressure Regulator Kits

EGR Lines

Fuel Tank Lock Rings

Fuel Tank Filler Necks

Fuel Tank Vent Valves

Secondary Air Injection Relays

EGR Valve Control Switches

Fuel Injector Connectors

Fuel Tank Sending Units

Fuel Injection Harness Connectors

Fuel Injection Pressure Regulator Seals

Fuel Injection Nozzle O-Rings

Mass Air Flow Sensor Connectors

Fuel Line Connectors

Fuel Tank Selector Switches

Fuel Tank Selector Valves

EGR Valve Position Sensors

Fuel Injector Harness

Fuel Pump Tank Seals

Exhaust Check Valves

Oxygen Sensor Connectors

Air Injection Pipe and Tubes

Fuel Injector O-rings

EGR Valve Gaskets

Fuel Pump Harness Connectors

Fuel Injection Warm Up Regulator Connectors

Fuel Injector Set

Fuel Cap Tester Adapters

Fuel System Wiring Harness Connectors

Fuel Injection Timing Sensors

Diesel Injection Control Pressure Harness

Fuel Tank Vent Valve Seals

Essential Fuel and Emissions Systems for 1997 Ford F-350 Pickups

from

$4.79

This fuel injection idle air control valve gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel injection idle air control valve gasket is designed to match the fit and function of the original gasket on specified vehicles.
Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$21.99

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our distributor caps are made of high dielectric strength, glass/mineral reinforced polyester resin for less carbon tracking, greater resistance to electrical breakdown, and superior performance
Solid brass terminals (where available) make better connections and greater resistance to electrical pitting and corrosion
RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$268.78

Motorcraft fuel senders are designed for durability and electrical performance in Ford and Lincoln vehicles. Features and Highlights

Product Features:

Electrical connections are gold-plated to help ensure reliable performance
Testing is performed in extreme operating conditions to ensure that the potentiometers meet Ford OE specifications
Designed to perform, even when exposed to fuel, oil, solvents, coolants and brake and transmission fluids

from

$15.79

Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$427.99

CARDONE Remanufactured Fuel Injection Regulating Valves control the pressure in the high pressure oil system which operates your injectors. Vehicle conditions such as poor idle, stalling, and no-start are some of the correctible symptoms. Each individual unit is completely disassembled and undergoes quality testing to ensure proper operating parameters to meet or exceed OEM performance.

Product Features:

Built and 100% tested to perform like the original, with all standard wear items replaced
Air decay tested to ensure on-car performance
Designed for easy installation and setup
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$56.99

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Made to OE spec to ensure a proper fit, form and function.
Sensors are engineered for precision performance, durability and a long service life.
All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.

from

$87.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$164.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The injection control pressure (ICP) sensor monitors and relays the oil pressure inside the high pressure oil rails to on-board computers, helping to ensure smooth and proper fuel injector actuation and operation. Properly pressurized oil delivery is critical to the hydraulically activated electronically assisted unit injector (HEUI) fuel injection system, and when this system fails to operate properly the on-board computers may throw a code and illuminate a check engine light. A failing or improperly functioning injection control pressure sensor will provide erratic or inaccurate readings to on-board computers, severely affecting fuel injection performance and system function. Tell-tale signs of failing or failed injection control pressure sensor are rough idle and operation, power loss and the inability to start the vehicle in more severe cases.

Product Features:

The Carquest Premium line of ICP sensors offer an extremely robust design, manufactured on OE production lines. The ICP sensor kit includes all necessary components for a professional installation.
Designed and manufactured with highest quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your injection control pressure sensor.
Upgraded materials compared to OE, including stainless steel housings and upgraded thermoplastics for superior corrosion resistance and high temperature performance.
Hermetically sealed, robotically laser-welded stainless steel housing creates a burst proof structure and superior environmental sealing protection from the elements.
All units are 100% helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are 100% tested using automated end-of-line testing equipment that pressurizes the sensor and checks full-spectrum functionality and electrical output to ensure each sensor meets manufacturing specifications before packaging.

from

$136.99

100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
Delphi OE technology validated to match the vehicle applications

from

$56.99

This replacement fuel injector harness matches the fit and function of the original equipment part to restore proper operation of the injection system. Made of quality materials, it features full insulated electrical connectors to prevent corrosion.

Product Features:

Ideal replacement – this fuel injector harness matches the original equipment part on specified vehicle years, makes and models.
Durable construction – this harness includes fully insulated electrical connectors to prevent corrosion.
Plug and play installation – made with factory-style connectors for quick, reliable installation
Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life

from

$108.99

GM Genuine Parts Fuel Tank Selector Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$25.99

from

$172.99

This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.

Product Features:

Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
Quality assured – this part has been validated to ensure a quality fit and long service life
Trustworthy design – backed by team of product specialists in the United States

from

$243.99

from

$27.99

This fuel tank vent valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel tank vent valve is designed to match the fit and function of the original valve on specified vehicles.
Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$74.99

New Platinum Pro Fuel Filler Neck, For Rear Mount Tank For Models With Single Rear Wheels

Product Features:

Rear Mount Tank Models With Single Rear Wheels
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$29.49

from

$69.25

NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Extensively Tested During Manufacture to Guarantee Quality and Reliability
Supplied With a Factory-Fitted OEM Connector for Easy Installation

from

$7.34

With today’s complex automotive engines, it’s even more critical to have the right sealing components for accurate pressure relief and gasket sealing.

Product Features:

Wide range available in precut sizes
Available plain or backed with adhesive
Bulk gasket material available for custom cutting by hand

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$28.49

This fuel tank selector switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel tank selector switch is made to match the fit and performance of the original switch on specific vehicle applications.
Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$55.99

Fuel Injector Repair Kit

from

$416.99

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$73.99

from

$59.99

from

$8.49

MAHLE gaskets provide world class sealing products trusted by OEMs and Technicians around the globe.

Product Features:

MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$66.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Delphi’s 100% OE replacement idle air control valves allow for accurate, stable, and precise air flow during the idle phase
Provides superior fit resulting in an easier installations
Maximizes fuel and engine efficiency

from

$20.46

Motorcraft Fuel Injector O-Ring Kits are manufactured with premium quality in mind

Product Features:

All parts meet original equipment requirements for fit, finish and durability
Specifically engineered for Ford and Lincoln vehicles
Durability tested to meet demanding original equipment service life specifications
Helps maintain original performance standards

Upgrade your 1997 Ford F-350 Pickup with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1997 Ford F-350 Pickup, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your F-350 Pickup functioning at its best. At Advance Auto Parts, we offer a wide selection of 252 Fuel and Emissions Systems for the 1997 Ford F-350 Pickup, designed to meet your needs without breaking the bank. From Fuel Pump replacements to Gas Caps upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1997 Ford F-350 Pickup at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $2.24 to $865.99, with an average price of $98.84. Our 252 Fuel and Emissions Systems in stock come from 25 trusted brands, so you’re sure to find the right part for your 1997 Ford F-350 Pickup without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1997 Ford F-350 Pickup, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like FELPRO, Motorcraft, Carquest Premium, and more. FELPRO Fuel and Emissions Systems start at just $2.29 and boast an impressive 5 stars average rating from customers. Motorcraft and Carquest Premium also bring quality to the table, with Fuel and Emissions Systems available starting at $2.99, and at an average 5 stars rating. With 3,295 customer reviews and counting, our 1997 Ford F-350 Pickup Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1997 Ford F-350 Pickup is always ready to roll. We’re committed to providing you with everything you need to keep your F-350 Pickup in top shape, all in one place. Start shopping confidently below for your 1997 Ford F-350 Pickup!

Best-Selling Fuel Pumps for 1997 Ford F-350 Pickups

Enhance the driving experience in your Ford with 20 quality Fuel Pump components, starting at $11.49.

show more show less

from

$41.49

This fuel pump strainer is designed to match the fit and function of the original strainer on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel pump strainer is designed to match the fit and function of the original strainer on specified vehicles.
Restores functionality – reliable replacement for an original part that has failed due to fatigue.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$120.99

CARQUEST fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every CARQUEST Fuel Pump to deliver greater reliability.

Product Features:

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Triple barb hose fitting provides superior, long-lasting seal
Superior return porting for optimum fuel flow
Enhanced pump to flange harness design provides worry-free electrical performance
Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
Gradient density, dual zone filtration designed for better contamination resistance

from

$154.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
When servicing the fuel system, always check the fuel filter for possible replacement
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$123.99

CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function.

Product Features:

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Advanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.
High-performance pump section assembly provides superior performance
Leading-edge inlet design to increase performance and efficiency, leading to longer life
High grade outer shell for life-long corrosion resistance
Optimized, precision-wound armature assembly for increased performance

from

$324.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank assemblies meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Reduce labor time up to 52% by using our fuel tank assembly which includes the fuel tank, fuel tank straps and fuel pump
Designed to ensure a debris free, clean fuel system upon replacement
Fuel tanks made with corrosion resistant, OE approved, Ni Terne steel
Proudly manufactured in Canada under stringent quality systems (QS-9000 and ISO 9002)

from

$68.99

Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$141.99

Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:

Meets or exceeds OE specifications for fit, form and function
Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$11.49

Filtration performance and micron rating meet or exceed OE requirements
OE replacement strainer designed for use with Delphi electric fuel pumps
Replacing the strainer is always recommended when replacing a fuel pump

from

$91.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$254.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
When servicing the fuel system, always check the fuel filter for possible replacement
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$174.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
All pumps are functionally tested for correct operation which improves pump reliability
Exact fit original equipment replacements means easy installation
Consistent pressure at all operating temperatures results in quick start-ups.
Pump is designed for diesel engines and applications
Always check fuel filter when replacing the fuel pump

from

$32.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$405.58

FUEL PUMP

from

$227.11

The Hella Electric Fuel Pump meets or exceeds the OE specifications for fit, durability and performance.

Product Features:

OE-Equivalent electric fuel pump.
Direct fit for easy installation.
OE connections and fittings.
Highly efficient turbine design.
Designed for quieter operation.

from

$215.07

As a leading Tier 1 supplier to the top 25 global vehicle manufacturers, Delphi understands what it takes to make the smart parts that technicians are looking for. Delphi knows that not every car in a repair shop is a newer model. But every driver still wants reliable, fast starts. So count on us to help you offer the fuel fixes that many new car dealerships cannot. Built to tough OE engineering standards, Delphi offers replacement fuel pumps for millions of domestic and imported vehicles, from American Motors to Honda, Volkswagen to Chrysler, and beyond. Older model vehicles with carburetors typically use mechanical fuel pumps. The pump can be located next to or on the engine, and uses an internal diaphragm to draw fuel from the tank and push it into the carburetor. A worn internal diaphragm is the most common cause for mechanical pump replacement. The diaphragm is made of cloth-reinforced rubber, and with age may wear out and leak causing poor fuel delivery. Because the diaphragm is integrally sealed inside of it, the entire mechanical fuel pump must be replaced.

Product Features:

Built to tough OE engineering standards
Reinforced Diaphram
Direct fit for easy installation

from

$167.26

Fuel Pump Assembly

from

$161.99

This fuel pump hanger assembly is designed to match the fit, function and appearance of the original assembly on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel pump hanger assembly matches the fit, function and appearance of the factory assembly on specified years, make and models.
Ideal solution – reliable replacement for an assembly that has failed due to moisture infiltration or collision damage.
Durable construction – this assembly is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$136.99

New Platinum Pro Fuel Module, Rear Mount Steel Tank 19 Gallon Fuel Pump

Product Features:

Rear Mount, Steel Tank 19 Gallon Fuel Pump
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$15.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

Most Popular 1997 Ford F-350 Pickup Gas Caps

Customize your Ford with 22 Gas Caps products like Gas Caps, all priced under $31.99.

show more show less

from

$15.79

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$11.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$16.79

None

Product Features:

Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$12.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.36

With Retaining Straps Motorcraft offers a wide variety of caps to support the ongoing maintenance needs of Ford and Lincoln vehicles.

Product Features:

Motorcraft provides extensive coverage of these caps
Available for most Ford and Lincoln vehicles
Locking sets are offered for dual-tank applications that contain two matching caps with four keys
Both locking- and non-locking styles are available

from

$14.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.49

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.79

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$16.79

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
“Torque Override” feature aids in the proper installation of the fuel cap. It produces an audible click as the O-ring that seals the cap is properly compressed.

from

$23.99

None

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$21.79

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$22.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$12.49

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$6.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$31.99

None

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$23.99

Experience uncompromising quality and emissions compliance with these tethered fuel caps. Manufactured with top-tier materials and rigorous production and safety standards adhering to Original Equipment Manufacturer guidelines. Designed meticulously to meet both state and federal emissions requirements, it ensures environmental responsibility. With its specifically engineered pressure and vacuum relief valves, fuel evaporation becomes a thing of the past. Bid farewell to the risk of losing up to 30 gallons of precious gasoline over a year due to a leaking fuel cap. Trust in our superior construction to safeguard your fuel and contribute to a greener future.

from

$10.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$22.99

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$22.99

FUEL TANK CAP

from

$20.99

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

Top Picks for 1997 Ford F-350 Pickup Fuel Injectors

Upgrade Ford F-350 Pickups with top-quality Fuel Injectors parts, including 72 OEM and aftermarket selections for your 1997 model.

show more show less

from

$2.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$62.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Application-specific to ensure the proper fit and form
Precision-engineered pressure regulators for proper fuel delivery and engine performance
As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?

from

$8.49

MAHLE gaskets provide world class sealing products trusted by OEMs and Technicians around the globe.

Product Features:

MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$3.49

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$7.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$2.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$14.99

The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:

Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles.
Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$4.79

Direct replacement – this fuel injection idle air control valve gasket is designed to match the fit and function of the original gasket on specified vehicles.
Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$136.99

100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
Delphi OE technology validated to match the vehicle applications

from

$244.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Application-specific to ensure the proper fit and form
Precision-engineered pressure regulators for proper fuel delivery and engine performance
As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?

from

$232.99

Injection control pressure determines fuel injection quantity under varying engine operating conditions. Improper injection quantity can result in poor engine performance or a no-start condition. New IPR valve is manufactured to meet or exceed original equipment performance specifications to ensure precise control of injection oil pressure.

Product Features:

Original equipment fit, form and function
Manufactured to precise OE performance specifications

from

$89.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$12.99

This fuel injector sleeve is a direct replacement for an original equipment part. Made of quality materials, this part has undergone try-on testing to ensure a quality fit and a long service life.

Product Features:

Ideal replacement – this fuel injector sleeve is a direct replacement for the original equipment part on specified engines.
Durable construction – this part is made from quality materials to resist damage from fuel and extreme temperatures.
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$9.99

The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$61.99

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$10.29

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$49.49

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$59.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to

from

$245.24

Motorcraft electric fuel Injectors are built with the knowledge and experience that only comes from being the original equipment (OE) manufacturer.

Product Features:

Same fuel Injectors installed during vehicle production
Latest engineering enhancements are incorporated
Hot fuel handling capabilities translate into consistent performance
Before they are shipped, fuel Injectors are 100-percent flow-tested
Units come as complete assemblies for easier, faster installation

from

$433.99

ACCEL Performance fuel injectors provides precise control of fuel delivery & atomization for improved throttle response. They are all new units: not modified stock units or remanufactured from used cores. They feature a low-mass disc design that ensures accurate metering control even at ultra-low & high duty cycles and higher fuel pressures. ACCEL performance Injectors can be used with gasoline or E85 and are great for blown applications where increased fuel pressure and precise metering are required. State-of-the-art manufacturing processes reduce flow deviations between injectors, which improve performance. Low- and High-impedance designs are available to match most commercial applications.

Product Features:

Provides precise control of fuel delivery & atomization for improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$122.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$33.49

This fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles.
Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$14.29

The injector sleeve provides sealing and cooling between the diesel fuel injector and cylinder head. Improper sealing can lead to combustion gas and coolant leaks into the fuel system, which can result in engine misfire and injector failure. Replacing the sleeve at time of injector service or replacement ensures proper sealing, improving injector longevity.

Product Features:

Original equipment fit, form and function

from

$75.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation, no audible regulator noise
Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Consistent and predictable fuel pressure throughout system range of control provides great drivability

from

$8.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
High-quality materials withstand extreme conditions
Undergoes extensive testing to ensure reliability
As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process

from

$14.05

Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:

Direct fit replacement provides proper fit, form, and function
Quality-engineered replacement for faulty OE part, which can fail from improper installation and wear-and-tear from carbon buildup
Constructed from reinforced brass to seal and protect immediate area of injector bore within cylinder head
All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time

from

$8.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$433.99

ACCEL Performance fuel injectors provides precise control of fuel delivery & atomization for increased power and improved throttle response. They are all new units: not modified stock units or remanufactured from used cores. They feature a low-mass disc design that ensures accurate metering control even at ultra-low & high duty cycles and higher fuel pressures. ACCEL performance Injectors can be used with gasoline or E85 and are great for blown applications where increased fuel pressure and precise metering are required. State-of-the-art manufacturing processes reduce flow deviations between injectors, which improve performance. Low- and High-impedance designs are available to match most commercial applications.

Product Features:

Provides precise control of fuel delivery & atomization for increased power and improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$285.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
State-of-the-art designs that meet or exceed OE specifications
Top-of-the-line quality and performance
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$301.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

100% O-ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

from

$225.99

CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Includes 100% replacement of plunger and barrel to improve longevity over competitive units
Includes all new premium quality O-rings and seals
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$315.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
State-of-the-art designs that meet or exceed OE specifications
Top-of-the-line quality and performance
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$4.75

Fuel Pres. Reg. O-Ri

from

$605.99

Provides precise control of fuel delivery & atomization for increased power and improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$494.99

Provides precise control of fuel delivery & atomization for increased power and improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$461.99

Provides precise control of fuel delivery & atomization for improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$30.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$527.99

Provides precise control of fuel delivery & atomization for increased power and improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance
Accurate Metering Control Even At Ultra-Low And High Duty Cycles

from

$56.99

Ideal replacement – this fuel injector harness matches the original equipment part on specified vehicle years, makes and models.
Durable construction – this harness includes fully insulated electrical connectors to prevent corrosion.
Plug and play installation – made with factory-style connectors for quick, reliable installation
Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life

from

$685.99

Carquest premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is tested on a sophisticated flow bench under multiple operating parameters. This injector four-pack offers savings over purchasing single injectors. Replacing all four injectors at the same time ensures a complete repair and reduces the chance of future labor costs.

Product Features:

Includes four premium fuel injectors
Each unit is 100% tested to OE specifications
Includes 100% replacement of plunger and barrel to improve longevity over competitive units
Includes all new premium quality o-rings and seals
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$641.99

Includes four premium fuel injectors
Each unit is 100% tested to OE specifications
Includes 100% replacement of plunger and barrel to improve longevity over competitive units
Includes all new premium quality o-rings and seals
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$545.99

Provides precise control of fuel delivery & atomization for increased power and improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$461.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation, no audible regulator noise
Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Consistent and predictable fuel pressure throughout system range of control provides great drivability

from

$450.99

Provides precise control of fuel delivery & atomization for increased power and improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$450.99

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$427.99

Built and 100% tested to perform like the original, with all standard wear items replaced
Air decay tested to ensure on-car performance
Designed for easy installation and setup
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$416.99

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$412.31

FUEL INJECTOR

In-Demand Oxygen Sensors for 1997 Ford F-350 Pickups

Select from 18 premium Oxygen Sensors parts for your 1997 Ford F-350 Pickup, with prices ranging from $14.99 to $89.10.

show more show less

from

$71.99

O2 Sensor

from

$57.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$54.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$59.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$59.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$49.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$49.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$69.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$53.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$60.99

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$69.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$89.10

The complete line of Motorcraft sensors and emission components is recommended by Ford Motor Company exclusively for use in Ford and Lincoln vehicles. Motorcraft oxygen sensors are designed for maximum performance.

Product Features:

Same components used in the factory
Units come ready to plug and play, with no need for modifications
OE connectors and wire lengths
Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
Designed to help provide optimal performance and fuel economy
OE enhancements are included in the most current designs
Vehicle-specific coverage Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.

from

$53.00

The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

from

$54.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$79.49

Denso Universal First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning.

Product Features:

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$60.08

Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$58.99

from

$14.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Most Sold 1997 Ford F-350 Pickup Air Flow Sensors

Explore our best-selling Ford parts for the 1997 F-350 Pickup among 17 OEM and aftermarket options starting from $10.49.

show more show less

from

$10.49

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$61.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.

from

$57.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$51.35

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

from

$64.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$80.99

from

$16.79

ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$25.99

from

$69.25

OE-Equivalent.
Direct fit for easy installation.
Extensively Tested During Manufacture to Guarantee Quality and Reliability
Supplied With a Factory-Fitted OEM Connector for Easy Installation

from

$152.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$96.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$69.90

Motorcraft Air Charged Temperature Sensors are designed and tested to meet OE specifications for durability and reliability under extreme conditions. These are manufactured using high standards which ensure long lasting durability. They have high resistance and offer superior service life.

Product Features:

Ensures long lasting durability
Reliable under extreme conditions
Made of high quality material
Resists fatigue failure
Offers superior service life

from

$67.18

The Bosch universal oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

from

$30.62

The Walker Air Charge Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$28.13

The Walker Air Charge Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$22.99

from

$20.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better

Top-Rated Fuel and Emissions Systems Brands For Your 1997 Ford F-350 Pickup

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1997 Ford F-350 Pickups. Below you’ll find some of our best rated Fuel and Emissions Systems from FELPRO, Motorcraft, and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 1997 F-350 Pickup start at just $2.29 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1997 Ford F-350 Pickup Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1997 Ford F-350 Pickup, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Fuel and Emissions Systems, specifically designed for the 1997 Ford F-350 Pickup. With over 6 FELPRO brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.29, with an average price of just $19.09. Plus, with over 176 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$90.99

This product is not rated

Fuel Injector O-Ring Kit

“”

from
$2.49

(27)

Fuel Injection Throttle Body Mounting Gasket

“all good”

from
$8.29

This product is not rated

UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET

“”

Popular Motorcraft 1997 Ford F-350 Pickup Fuel and Emissions Systems

Motorcraft auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1997 Ford F-350 Pickup owner should feel confident when installing genuine Motorcraft parts in their vehicle. To ensure the best fit and performance for your 1997 F-350 Pickup, Advance Auto Parts carries a full inventory of 18 Motorcraft Fuel and Emissions Systems. Plus you will be keeping your Ford in peak condition while saving money because prices on these Motorcraft Fuel and Emissions Systems range from $4.75 to $329.99, plus, with more than 2 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from
$89.1

This product is not rated

Oxygen Sensor: Engineered for Maximum Performance and Fuel Efficiency

“”

from
$245.24

This product is not rated

Fuel Injector

“”

from
$88.99

This product is not rated

Original Equipment (O.E.) Sensor Assembly

“”

FAQs for 1997 Ford F-350 Pickup Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 1997 Ford F-350 Pickups?

Out of 252 Fuel and Emissions Systems that fit 1997 Ford F-350 Pickups, the following parts are the top sellers:

Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack (18481528) – $14.99
Fuel Injector O-Ring Kit (3504360) – $7.49
O2 Sensor (11977682) – $71.99

What’s the price range for 1997 Ford F-350 Pickup Fuel and Emissions Systems?

Fuel and Emissions System prices for the 1997 Ford F-350 Pickup start at $2.24 and go up to $865.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 1997 Ford F-350 Pickup?

The average price for Fuel and Emissions Systems for the 1997 Ford F-350 Pickup is $98.84. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Ford F-350 Pickup model years?

Yes, we currently carry Fuel and Emissions Systems for 41 model years of Ford F-350 Pickups between 1953 and 1996. Fuel and Emissions Systems are bought most frequently for the following model years: 1996, 1995, 1994, 1993, 1992, 1991, 1990, 1989, and 1988.

What are the cheapest Fuel and Emissions Systems for my 1997 Ford F-350 Pickup?

The cheapest 1997 Ford F-350 Pickup Fuel and Emissions Systems we carry in stock are:

Idle Air Valve Gaskets (10740553) – $2.24
THROTTLE BODY GASKET SET (20688609) – $2.29
Fuel Injection Idle Air Control Valve Gasket (12547257) – $2.29
Fuel Injection Throttle Body Mounting Gasket (3210227) – $2.49
EGR/EXHAUST AIR SUPPLY GASKET (3208095) – $2.99

What are the top-rated Fuel and Emissions Systems that fit the 1997 Ford F-350 Pickup?

Out of 3,295 reviews by customers, our 1997 Ford F-350 Pickup Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 1997 Ford F-350 Pickup and their top-rated products:

Fuel Wiring Connectors
- Coil Harness Repair Kit (22147946) – $16.99
Diesel Fuel Injectors
- Coil Harness Repair Kit (22147946) – $16.99

What types of Fuel and Emissions Systems do you sell for my 1997 Ford F-350 Pickup?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1997 Ford F-350 Pickup:

Can I get help with 1997 Ford F-350 Pickup Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Fuel and Emissions Systems and more.

What is your return policy for Ford F-350 Pickup Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Ford F-350 Pickup Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1997 Ford F-350 Pickup Fuel and Emissions Systems

Dorman – Help – Idle Air Valve Gaskets (Part No.90102)

Carquest – Oxygen Sensor Connector (Part No.PT5525)

Motorcraft – Fuel Tank Sending Unit (Part No.E2030351317MTR)

Driveworks – Electrical Relay (Part No.83265)

Cardone – Injection Pressure Regulating Valve (Part No.2V-231)

Carquest Premium – New MAP SENSOR (Part No.ECE1196)

Carquest Premium – Exhaust Gas Recirculation (EGR) Pressure Sensor (Part No.EGA1027)

Carquest Premium – Diesel Injection Control Pressure Sensor (Part No.HMA1005K)

Delphi – Mass Air Flow Sensor (Part No.AF10155)

Dorman – Diesel Fuel Injection and Glow Plug Inner Harness (Part No.904-201)

GM Genuine Parts – Fuel Tank Selector Valve (Part No.U7000)

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1073)

Carquest – Steel Fuel Tank (Part No.576-116)

Carquest Premium – Fuel Injection Timing Sensor (Part No.HMA1009)

Dorman – Fuel Tank Vent Rollover Valve (Part No.911-060)

KAI – Fuel Filler Neck (Part No.FFN010168)

Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1009)

NTK – NTK Oxygen Sensor (Part No.C5010299262NTK)

Motorcraft – Idle Control Valve Gasket (Part No.C4063195642MTR)

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Dorman – Fuel Tank Selector Switch (Part No.901-301)

Wells Vehicle Electronics – Fuel Injector Repair Kit (Part No.2G2116)

Cardone – Fuel Injector (Part No.2J-209)

Carquest Premium – Idle Air Control Valve (Part No.ABC1643)

Carquest Premium – Secondary Air Injection Pipe (Part No.ECN1058)

MAHLE Original – Fuel Injection Nozzle O-Ring Kit, 6 Piece (Part No.GS33440)

Delphi – Fuel Injection Idle Air Control Valve (Part No.CV10090)

Motorcraft – Fuel Injector O-Ring Kit (Part No.C1013374364MTR)

Dorman – Fuel Sending Unit Pick Up Screen (Part No.904-419)

Spectra Premium – Pump (Part No.SP155)

Delphi – Fuel Pump and Strainer Set: With Seals, Clips, Splices (Part No.FG0198)

Spectra Premium – Pump (Part No.SP154)

Spectra Premium – Fuel Tank and Pump Assembly Combination (Part No.F1G1FA)

Carquest Premium – Fuel Pump Hanger Assembly: Fuel Pump and Strainer (Part No.M119619)

Carquest Premium – Mechanical Fuel Pump 2480536: Includes Gasket (Part No.2480536)

Delphi – Fuel Pump Strainer (Part No.FS0120)

Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit, Wiring Harness and Strainer (Part No.M119621)

Delphi – Fuel Pump and Strainer Set: With Seal, Clips, Splices (Part No.FG0199)

Delphi – Mechanical Fuel Lift Pump: External (Part No.HFP917)

Carquest Premium – Mass Air Flow Sensor Connector (Part No.PTA1213)

Worldpac – FUEL PUMP (Part No.E3000322457DEL)

Hella – Electric Fuel Pump (Part No.E3000419975HEL)

Delphi – Fuel Pump – Mechanic (Part No.E30031191214DEL)

Autopart International Inc – Fuel Pump Assembly (Part No.E30012053150API)

Dorman – Fuel Tank Sending Unit (Part No.692-251)

KAI – Fuel Pump Module Assembly (Part No.FMD010039)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

Carquest Premium – Diesel Fuel Cap: 10819D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819D)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591D)

Carquest Premium – Fuel Cap: 10830, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10830)

Motorcraft – Motorcraft Fuel Tank Cap (Part No.E2010196383MTR)

Carquest Premium – Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)

Carquest Premium – Fuel Cap: 10834, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10834)

Carquest Premium – Gas Cap: Twist On, Reduces Air Pollution, 1 Pack (Part No.10817)

Carquest Premium – Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10501)

Carquest Premium – Fuel Cap: 10819, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819)

Carquest Premium – Locking Fuel Cap (Part No.10591)

Carquest Premium – Locking Fuel Cap: 10591D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10591D)

Carquest Premium – Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10504)

Carquest Premium – Locking Fuel Cap: 10507, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10507)

Carquest Premium – Diesel Fuel Cap: 10830D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10830D)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17504)

Carquest Premium – Locking Fuel Cap (Part No.10501D)

Motorad – Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack (Part No.MGC817T)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17507)

Carquest Premium – Locking Fuel Cap: 17501D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.17501D)

Motorcraft – FUEL TANK CAP (Part No.FC-920)

Motorad – Tethered Fuel Cap (Part No.MGC517T)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60845)

Carquest – Fuel Injection Pressure Regulator (Part No.22856)

MAHLE Original – Fuel Injection Nozzle O-Ring Kit, 6 Piece (Part No.GS33440)

MAHLE Original – Gasket (Part No.G31324)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Felpro – THROTTLE BODY GASKET SET (Part No.71216)

Dorman – Diesel Fuel Injector O-ring Kit (Part No.904-206)

Dorman – Help – Idle Air Valve Gaskets (Part No.90102)

Delphi – Mass Air Flow Sensor (Part No.AF10155)